Beilstein Arch. 2023, 202334. https://doi.org/10.3762/bxiv.2023.34.v1
Published 21 Aug 2023
AFM sharp tips have been used to characterize nanostructures and quantify the mechanical properties of the materials in several areas of research. The analytical results can show unpredicted errors if we do not know the exact values of the AFM tip radius. There are many techniques of in-situ measurements for determining the actual AFM tip radius but limited to uncoated tips. This paper presents an alternative and simple method to determine the radii of coated tips and the uncoated tip. The Pt-coated, Cr-Au coated, and Si uncoated tips were used to scan on the calibration standard grating in AFM contact mode with sub-nano loading to get the curved scan profile of the edge corner of the grating structure. The data points of the curved profile of each tip were fitted with the nonlinear regression function to estimate the curvature radius of the tip. The results show that the estimated radius of the coated tips is in the range of nominal values provided by the tip manufacturer while the estimated radius of the Si uncoated tip is bigger than the nominal radius due to tip blunting during the scan. However, this method yields an accurate estimate of the tip radius with the low value of root mean squared error from curve fitting results.
Keywords: AFM tip calibration; nonlinear regression curve fitting
| Format: DOCX | Size: 818.4 KB | Download |
When a peer-reviewed version of this preprint is available, this information will be updated in the information box above. If no peer-reviewed version is available, please cite this preprint using the following information:
Boonpuek, P.; Felts, J. R. Beilstein Arch. 2023, 202334. doi:10.3762/bxiv.2023.34.v1
Citation data can be downloaded as file using the "Download" button or used for copy/paste from the text window below.
Citation data in RIS format can be imported by all major citation management software, including EndNote, ProCite, RefWorks, and
Zotero.
© 2023 Boonpuek and Felts; licensee Beilstein-Institut.
This is an open access work licensed under the terms of the Beilstein-Institut Open Access License Agreement (https://www.beilstein-archives.org/xiv/terms), which is identical to the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0). The reuse of material under this license requires that the author(s), source and license are credited. Third-party material in this work could be subject to other licenses (typically indicated in the credit line), and in this case, users are required to obtain permission from the license holder to reuse the material.
