Optimizing reaction conditions for the light-driven hydrogen evolution in a loop photoreactor

• Pengcheng Li,
• Daniel Kowalczyk,
• Johannes Liessem,
• Mohamed M. Elnagar,
• Dariusz Mitoraj,
• Radim Beranek and
• Dirk Ziegenbalg

Beilstein J. Org. Chem. 2024, 20, 74–91, doi:10.3762/bjoc.20.9

• , Germany 10.3762/bjoc.20.9 Abstract Photocatalytic hydrogen production from water is a promising way to fulfill energy demands and attain carbon emission reduction goals effectively. In this study, a loop photoreactor with a total volume of around 500 mL is presented for the photocatalytic hydrogen

• be applied. Notably, the loop photoreactor demonstrated an external photon efficiency up to 17 times higher than reported in literature studies, while scaling the reactor size by a factor of 10. Keywords: loop photoreactor; parametric study; photocatalytic hydrogen evolution; polymeric carbon

• the contrary, expanding photocatalytic systems, particularly those employing powdered photocatalysts, to a larger scale is notably more straightforward [17][18]. However, complications arise when attempting to scale up reactors solely based on geometric similarity, as alterations in mixing and

Aromatic systems with two and three pyridine-2,6-dicarbazolyl-3,5-dicarbonitrile fragments as electron-transporting organic semiconductors exhibiting long-lived emissions

• Karolis Leitonas,
• Brigita Vigante,
• Dmytro Volyniuk,
• Audrius Bucinskas,
• Pavels Dimitrijevs,
• Sindija Lapcinska,
• Pavel Arsenyan and
• Juozas Vidas Grazulevicius

Beilstein J. Org. Chem. 2023, 19, 1867–1880, doi:10.3762/bjoc.19.139

• the photocatalytic production of H2 while the nanospheres produced hydrogen peroxide (H2O2). The introduction of the additional carbazolylphenyl moiety in the CPC molecule [4] allowed us to improve the EQEmax of an OLED to 25% [7]. In continuation of our studies in the field of the development of new

Recent advancements in iodide/phosphine-mediated photoredox radical reactions

• Tinglan Liu,
• Yu Zhou,
• Junhong Tang and
• Chengming Wang

Beilstein J. Org. Chem. 2023, 19, 1785–1803, doi:10.3762/bjoc.19.131

• groundbreaking work of Shang and Fu on photocatalytic decarboxylative alkylations in 2019, a wide range of organic transformations, such as alkylation, alkenylation, cyclization, amination, iodination, and monofluoromethylation, have been progressively achieved using a combination of iodide and PPh3. In this

• review, we primarily focus on summarizing the recent advancements in inexpensive and readily available iodide/phosphine-mediated photoredox radical transformations. Keywords: annulation; decarboxylative; iodide/phosphine; photocatalytic; radical reaction; Introduction Over the past few decades

• obtain, thus greatly impeding the widespread application of photoredox catalysis in large-scale industrial processes. In this context, in 2019, Shang, Fu, and their colleagues made an important breakthrough in addressing these above-mentioned limitations [6]. They disclosed a photocatalytic

Selectivity control towards CO versus H₂ for photo-driven CO₂ reduction with a novel Co(II) catalyst

• Lisa-Lou Gracia,
• Philip Henkel,
• Olaf Fuhr and
• Claudia Bizzarri

Beilstein J. Org. Chem. 2023, 19, 1766–1775, doi:10.3762/bjoc.19.129

• its physicochemical properties. Moreover, we tailored a fully earth-abundant photocatalytic system to achieve specifically CO2 reduction, optimizing efficiency and selectivity. By changing the conditions, we enhanced the turnover number (TON) of CO production from only 0.5 to more than 60 and the

• ) complex; earth-abundant; hexafluoropropanol; photocatalytic CO2 reduction; Introduction Solar energy conversion into chemical energy addresses the issues of energy shortage with the exploitation of renewable sources [1]. Photoinduced CO2 reduction is included in the vast research field of artificial

• developing the major components of a photocatalytic system for CO2 reduction, such as the photosensitizer (PS), the catalyst, and the sacrificial electron donor (SeD). Nevertheless, the solvent and eventual additives play an important role too [6], as they can influence the (photo)redox properties of the

Non-noble metal-catalyzed cross-dehydrogenation coupling (CDC) involving ether α-C(sp³)–H to construct C–C bonds

• Hui Yu and
• Feng Xu

Beilstein J. Org. Chem. 2023, 19, 1259–1288, doi:10.3762/bjoc.19.94

• into a carbon-centered radical B which then combines with 2-methylpyridine to obtain radical intermediate C. Oxidation of intermediate C by radical A then furnishes the product. Photocatalyzed CDC reactions In recent years, visible-light-driven photocatalytic processes have been considered influential

• in functionalizing unactivated C(sp3)–H substrates, including ethers [109][110][111][112][113][114]. In 2018, Wang et al. reported the photocatalytic CDC α-alkylation of N-heteroarenes in acetone solution, using noble-metal Ir as a photocatalyst to induce the reaction (Scheme 41) [115]. Subsequently

• promote the sunlight-induced reaction and hydrogen transfer CDC of heteroaromatics and several H-donors (including ethers) under mild conditions (Scheme 42) [122]. There have been no previous reports using this catalyst for the alkylation of aromatics. Subsequently, various photocatalytic CDC

Radical ligand transfer: a general strategy for radical functionalization

• David T. Nemoto Jr,
• Kang-Jie Bian,
• Shih-Chieh Kao and
• Julian G. West

Beilstein J. Org. Chem. 2023, 19, 1225–1233, doi:10.3762/bjoc.19.90

• paradigm with photocatalytic ATRA to enable the modular difunctionalization of alkenes under reagent control (Scheme 3). In Stephenson’s photocatalytic ATRA reports, the C–X bond in the product was proposed to be formed through both direct quenching of a transient alkyl radical by halogen atom transfer

Enabling artificial photosynthesis systems with molecular recycling: A review of photo- and electrochemical methods for regenerating organic sacrificial electron donors

• Grace A. Lowe

Beilstein J. Org. Chem. 2023, 19, 1198–1215, doi:10.3762/bjoc.19.88

• artificial photosynthesis. Systems for photocatalytic carbon dioxide reduction are optimized using sacrificial electron donors. One strategy for coupling carbon dioxide reduction and water oxidation to achieve artificial photosynthesis is to use a redox mediator, or recyclable electron donor. This review

• decoupled water splitting research, are introduced as alternative recyclable sacrificial electron donors and their oxidation potentials are compared to the redox potentials of some model photosensitizers. The aim of this review is to act as a reference for researchers developing photocatalytic systems with

• solvent polarity [24][25]. Hence, it is important when considering new reagents and catalysts to only compare potentials measured in conditions as close to the photocatalytic conditions as possible. For instance, quinones have 2 one-electron reductions in aprotic media and one two-electron reduction at a

Photoredox catalysis harvesting multiple photon or electrochemical energies

• Mattia Lepori,
• Simon Schmid and
• Joshua P. Barham

Beilstein J. Org. Chem. 2023, 19, 1055–1145, doi:10.3762/bjoc.19.81

• magnitude potentials can lead to uncontrolled reactions due to the accumulation of reactive intermediates within proximity of the electrode surface. Compared to homogeneous photocatalytic processes that lend themselves to high selectivity for taming radical intermediates by taking place in bulk solution

• qualitative description is used as per the report in question (e.g., ‘blue LEDs’). The König group first reported a photocatalytic approach to C(sp2)–X activation harnessing multiple photon energies in their seminal work on perylene diimide (PDI) catalysts [15]. In their proposed consecutive photoinduced

• widely used as reagents, organocatalysts, or phase transfer reagents [58][59][60][61] were synthesized from aryl chlorides in various yields (20–87%) under mild photocatalytic conditions whereas previously reported protocols typically relied on transition metal catalysis or high temperature processes [62

Photoredox catalysis enabling decarboxylative radical cyclization of γ,γ-dimethylallyltryptophan (DMAT) derivatives: formal synthesis of 6,7-secoagroclavine

• Alessio Regni,
• Francesca Bartoccini and
• Giovanni Piersanti

Beilstein J. Org. Chem. 2023, 19, 918–927, doi:10.3762/bjoc.19.70

• are usually more convergent, enabling a more diverse chemical space in a rapid fashion [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15]. Currently, increasing numbers of synthetic chemists are developing photocatalytic processes to make molecules efficiently and in an environmentally friendly

• intramolecular decarboxylative cyclization with the formation of the 3,4-fused indole carbocycle rings (Figure 1b,c). In detail, the photocatalytic strategy for accessing the two C(sp3) radicals of DMAT derivatives envision the formation of a relatively stabilized allylic-benzylic carbon-centered radical by

• radical is stabilized by both the indole ring and the Δ2-olefin. Next, the resonance-stabilized radical intermediate III was trapped by the active α-aminoalkyl radical, generated by reductive decarboxylation by Ir(II) produced in the photocatalytic cycle (which undergoes oxidation to afford the Ir(III

Photocatalytic sequential C–H functionalization expediting acetoxymalonylation of imidazo heterocycles

• Deepak Singh,
• Shyamal Pramanik and
• Soumitra Maity

Beilstein J. Org. Chem. 2023, 19, 666–673, doi:10.3762/bjoc.19.48

• either on harsh reaction conditions or require the preactivation of substrates, which limits their synthetic efficiency. A photocatalytic quaternary C-3 alkylation has also been reported recently (Scheme 1A) [21][22]. During the course of our study, the Wu group reported a solvent-controlled

• using air as the sole oxygen source. Keeping in mind the progress in photochemical relay catalysis [24] and the attention paid to photocatalytic carbon-bond functionalization in the past several years [25], here we developed an organophotoredox-catalyzed C–H functionalization of imidazo[1,2-a]pyridines

• and related heterocycles with active bromomethylenes under mild conditions (Scheme 1B). Importantly, using simple Zn(OAc)2 as the additive, the first photocatalytic direct acetoxymalonylation of imidazo heterocycles was developed under aerobic conditions. Here, the additive Zn(OAc)2 plays a crucial

NaI/PPh₃-catalyzed visible-light-mediated decarboxylative radical cascade cyclization of N-arylacrylamides for the efficient synthesis of quaternary oxindoles

• Dan Liu,
• Yue Zhao and
• Frederic W. Patureau

Beilstein J. Org. Chem. 2023, 19, 57–65, doi:10.3762/bjoc.19.5

• existing methods generally require stoichiometric, often onerous reagents [21][22][23][24][25][26][27][28], and/or high temperatures [29][30][31][32][33][34][35][36][37][38]. In the past few years, photocatalytic processes have become one of the most powerful tools in developing radical-initiated addition

• limited substrate scopes (Scheme 1a). With the rapid development of sustainable chemistry, developing low-cost and transition-metal-free photocatalytic methods has become a strategic priority. In 2019 [54], the groups of Fu and Shang pioneered the photocatalytic decarboxylative alkylation of silyl enol

• run in a similar fashion to related well-documented previous reports [54][68][69][70][71][72][73][74][75][76][77], through a light-induced, phosphine-assisted, intermolecular electron transfer from sodium iodide to the redox-active ester. Conclusion In summary, we developed an effective photocatalytic

Redox-active molecules as organocatalysts for selective oxidative transformations – an unperceived organocatalysis field

• Elena R. Lopat’eva,
• Igor B. Krylov,
• Dmitry A. Lapshin and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2022, 18, 1672–1695, doi:10.3762/bjoc.18.179

• catalyzed by ABNO-type amine-N-oxyl radicals. Hydrogen atom transfer (HAT) and single-electron transfer (SET) as basic principles of amine cation radical oxidative organocatalysis. Electrochemical quinuclidine-catalyzed oxidation involving unactivated C–H bonds. DABCO-mediated photocatalytic C–C cross

Supramolecular approaches to mediate chemical reactivity

• Pablo Ballester,
• Qi-Qiang Wang and
• Carmine Gaeta

Beilstein J. Org. Chem. 2022, 18, 1463–1465, doi:10.3762/bjoc.18.152

• -workers [19] reported an efficient photocatalytic supramolecular system based on a self-assembled nanosystem. The self-assembled system was obtained in an aqueous medium by inclusion of ammonium benzoyl-ʟ-alaninate (G) in a tetraphenylethylene-embedded pillar[5]arene (m-TPEWP5). The resulting worm-like

• supramolecular nanostructures, displayed aggregation-induced emission (AIE) due to the restricted phenyl-ring rotation of m-TPEWP5 component. Inspired by natural photosynthesis and following an energy transfer process, the supramolecular nanorod assembly was employed as a nanoreactor for a photocatalytic

Heterogeneous metallaphotoredox catalysis in a continuous-flow packed-bed reactor

• Wei-Hsin Hsu,
• Susanne Reischauer,
• Peter H. Seeberger,
• Bartholomäus Pieber and
• Dario Cambié

Beilstein J. Org. Chem. 2022, 18, 1123–1130, doi:10.3762/bjoc.18.115

• [4][5]. This is underlined by several photochemical and photocatalytic transformations that have been performed on industrial scales in continuous-flow reactors [6][7][8]. A particularly appealing branch of photocatalytic organic synthesis is the combination with other modes of catalysis in dual

Tetraphenylethylene-embedded pillar[5]arene-based orthogonal self-assembly for efficient photocatalysis in water

• Zhihang Bai,
• Krishnasamy Velmurugan,
• Xueqi Tian,
• Minzan Zuo,
• Kaiya Wang and
• Xiao-Yu Hu

Beilstein J. Org. Chem. 2022, 18, 429–437, doi:10.3762/bjoc.18.45

• photosynthesis and exhibited a high catalytic efficiency for the photocatalytic dehalogenation reaction of various bromoketone derivatives with good yields in short reaction time in water. Keywords: aggregation-induced emission; Förster resonance energy transfer; host–guest interaction; photocatalysis

• of solar energy [7]. In general, an effective supramolecular donor–acceptor system was employed to construct a photocatalytic system using FRET [6][8]. To fabricate a successful FRET system, the following key points need to be considered, i) the acceptor absorption spectrum should have good

• supramolecular photocatalytic systems by self-assembly strategies [10][11]. Recently, FRET-based supramolecular self-assembled systems [12][13] as nanoreactors for various photocatalytic reactions have received significant attention from the supramolecular community because of their robust molecular design and

DABCO-promoted photocatalytic C–H functionalization of aldehydes

• Bruno Maia da Silva Santos,
• Mariana dos Santos Dupim,
• Cauê Paula de Souza,
• Thiago Messias Cardozo and
• Fernanda Gadini Finelli

Beilstein J. Org. Chem. 2021, 17, 2959–2967, doi:10.3762/bjoc.17.205

• , Universidade Federal do Rio de Janeiro 149, Athos da Silveira Ramos Ave, Rio de Janeiro RJ, 21941-909, Brazil 10.3762/bjoc.17.205 Abstract Herein we present a direct application of DABCO, an inexpensive and broadly accessible organic base, as a hydrogen atom transfer (HAT) abstractor in a photocatalytic

• abstractor in photocatalytic strategies could expand the catalyst combinations, as illustrated in Figure 1, to create new and exciting methodologies and improve the understanding on theoretical aspects of the HAT process with nitrogen radical cations. However, despite its promising chemical properties and

•  2a). Suga and co-workers reported an electrochemical approach for P–H bond activation promoted by this reactive species, leading to the synthesis of several phosphacycles [24] (Figure 2b). Concomitantly with the development of our work, some photocatalytic strategies for DABCO activation emerged. Li

Exfoliated black phosphorous-mediated CuAAC chemistry for organic and macromolecular synthesis under white LED and near-IR irradiation

• Azra Kocaarslan,
• Zafer Eroglu,
• Önder Metin and
• Yusuf Yagci

Beilstein J. Org. Chem. 2021, 17, 2477–2487, doi:10.3762/bjoc.17.164

• . In this respect, 2D materials offer great potential due to converting the inexhaustible energy of sunlight into chemical and electrical energy along with having a less environmental impact. After the discovery of the photocatalytic effect of 2D materials under UV light [14][15] the heterogeneous

Photoredox catalysis in nickel-catalyzed C–H functionalization

• Lusina Mantry,
• Rajaram Maayuri,
• Vikash Kumar and
• Parthasarathy Gandeepan

Beilstein J. Org. Chem. 2021, 17, 2209–2259, doi:10.3762/bjoc.17.143

• . Notably, the photocatalytic conditions proved suitable for the benzylic C(sp3)−H and unactivated alkane cyclohexane C‒H arylations. The catalytic cycle is proposed to involve the oxidative addition of nickel(0) 4-IV into an aryl chloride 8a to form nickel(II) intermediate 4-V (Figure 4) [56]. The SET

• for the mode of action of this cascade arylation protocol (Figure 10) [73]. In the photocatalytic cycle, the SET event between the photoexcited iridium catalyst 10-II and the substrate oxalate 33 generates a tertiary carbon-centered radical 10-IV by decarboxylation and the reduced iridium(II

• ]. Notably, this method proceeds through a unique mechanism (Figure 18) involving five steps: i) anion exchange between the iridium catalyst and nickel catalyst; ii) generation of a bromine radical and nickel(I) species in the photocatalytic cycle; iii) hydrogen atom abstraction events between the bromine

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

• has been selectively feasible without activating a C(sp2)–H bond in the arene moiety. Verma and co-workers [91] have reported the use of VO(acac)2 immobilized over graphitic carbon nitride (VO@gC3N4) under visible light irradiation to perform a photocatalytic C–H activation of arene methides and

Cerium-photocatalyzed aerobic oxidation of benzylic alcohols to aldehydes and ketones

• Girish Suresh Yedase,
• Sumit Kumar,
• Jessica Stahl,
• Burkhard König and
• Veera Reddy Yatham

Beilstein J. Org. Chem. 2021, 17, 1727–1732, doi:10.3762/bjoc.17.121

• herein report a mild aerobic photocatalytic oxidation of benzylic alcohols to aldehydes and ketones using 10 mol % CeCl3·7H2O (Scheme 1). Results and Discussion A variety of reaction parameters was tested during the optimization of the reaction with 4-iodobenzyl alcohol (1a) as the model substrate and

Heterogeneous photocatalytic cyanomethylarylation of alkenes with acetonitrile: synthesis of diverse nitrogenous heterocyclic compounds

• Guanglong Pan,
• Qian Yang,
• Wentao Wang,
• Yurong Tang and
• Yunfei Cai

Beilstein J. Org. Chem. 2021, 17, 1171–1180, doi:10.3762/bjoc.17.89

• .17.89 Abstract A visible light-mediated heterogeneous photocatalytic cyanomethylarylation of alkenes with acetonitrile has been established using K-modified carbon nitride (CN-K) as a recyclable semiconductor photocatalyst. This protocol, employing readily accessible alkyl N-hydroxyphthalimide (NHPI

• independently disclosed a photocatalytic cyanomethylarylation of N-aryl/benzoyl acrylamide for the synthesis of oxindoles and isoquinolinediones using diazonium salts and PIFA/1,3,5-trimethoxybenzene as radical initiators, respectively [29][30][31]. In this case, expensive Ru and 4CzIPN-based homogeneous

• conditions. Recently, we demonstrated K-modified carbon nitride (CN-K), a semiconductor material, exhibited a remarkably enhanced photocatalytic activity in the decarboxylative Giese reaction. The effect was due to its K-intercalated poly(heptazine)-based structure existing as small lamellar nanocrystallites

Insight into functionalized-macrocycles-guided supramolecular photocatalysis

• Minzan Zuo,
• Krishnasamy Velmurugan,
• Kaiya Wang,
• Xueqi Tian and
• Xiao-Yu Hu

Beilstein J. Org. Chem. 2021, 17, 139–155, doi:10.3762/bjoc.17.15

• , calixarenes, and pillararenes. This minireview not only summarizes the role that macrocycles play in photocatalytic reactions but also clarifies the photocatalytic mechanisms. Finally, the future research efforts and new pathways to apply macrocycles and supramolecular hybrid materials in photocatalysis are

• -dependent selective arrangement of one or two substrates within the cavity for photocatalysis. Therefore, this review will focus on: i) the role of the supramolecular system in mediating the photocatalytic selectivity, yield, and the rate of the photocatalytic products and ii) macrocycle-assisted hybrid

• materials that have been exploited for photocatalytic applications, including photocatalytic dye degradations and hydrogen evolution. To successfully perform supramolecular photocatalytic reactions, various photophysical and photochemical properties of the host–guest system need to be considered [4]: i) the

Dawn of a new era in industrial photochemistry: the scale-up of micro- and mesostructured photoreactors

• Emine Kayahan,
• Mathias Jacobs,
• Leen Braeken,
• Leen C.J. Thomassen,
• Simon Kuhn,
• Tom van Gerven and
• M. Enis Leblebici

Beilstein J. Org. Chem. 2020, 16, 2484–2504, doi:10.3762/bjoc.16.202

• the starting concentration, χa is the conversion, τ is the residence time, PSTY is the photocatalytic space time yield, and P is the lamp power. In this paper, together with photomicroreactors, larger-scale photoreactors that contain micro- and mesostructures will be discussed since the performance

• conditions and the kinetics of the selected reaction can lead to drastic changes in the PSTY. de Sá et al. combined external and internal numbering up in meso- and microchemical reactors of various sizes (Figure 3e). Photocatalytic degradations of methylene blue, rhodamine B, and phenol with TiO2 were

• photoreactor by using the photocatalytic oxidation of thiols to disulfides as a model reaction [9]. Two, four, and eight photomicroreactors, each having a 0.5 mm internal diameter and a 0.95 mL volume were connected in parallel by using T-junctions. The fluid is distributed in a tree-like structure. A stable

Recent developments in enantioselective photocatalysis

• Callum Prentice,
• James Morrisson,
• Andrew D. Smith and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2020, 16, 2363–2441, doi:10.3762/bjoc.16.197

• contain an exhaustive list of all enantioselective photocatalytic reactions; however, this review does aim to cover the different strategies that have been developed [5][6][7][8][9][10][11][12][13][14][15][16]. There is a subset of reactions that achieve asymmetry via a stepwise photochemical process

• ]•+, with the latter oxidising 22 to give radical cation 22•+ and turn over the photocatalytic cycle. The radical cation 22•+ is then proposed to participate in a two-step electron and proton exchange process with [CoII] to give [H–CoIII] and iminium ion 24, likely via a [CoI] intermediate. [H–CoIII] can

• et al. (Scheme 41) [103]. The proposed mechanism implicates an oxidative quenching cycle using a sacrificial oxidant (TIPS-EBX), followed by a PCET step with hydrogen-bonded complex 260 to give chiral ion pair 260•, which completes the photocatalytic cycle. Subsequent enantioselective radical

Photosensitized direct C–H fluorination and trifluoromethylation in organic synthesis

• Shahboz Yakubov and
• Joshua P. Barham

Beilstein J. Org. Chem. 2020, 16, 2151–2192, doi:10.3762/bjoc.16.183

• for inducing different organic transformations under extremely mild conditions without threatening reagents and conditions [83][84][85]. There are three commonly observed and distinct mechanisms of photocatalytic activation [86] in the context of organic synthesis: i) Most reported photocatalytic

• properties and reactivity can be synthesized on an industrial scale (Scheme 3) [194]. 2.3 General mechanism of photosensitized C–H fluorination Generally, the mechanism of photocatalytic activation induced by energy transfer involves the simultaneous photoinduced electron exchange between the photosensitizer

• photocatalytic direct fluorination of unactivated C(sp3)–H bonds by employing Selectfluor® and anthraquinone (AQN, T1 = 61.9 kcal⋅mol−1) as a photosensitizer. Control experiments showed that, under their conditions, both light and AQN were necessary for the reaction to proceed. A variety of different compounds