Ionic liquids as transesterification catalysts: applications for the synthesis of linear and cyclic organic carbonates

• Maurizio Selva,
• Alvise Perosa,
• Sandro Guidi and
• Lisa Cattelan

Beilstein J. Org. Chem. 2016, 12, 1911–1924, doi:10.3762/bjoc.12.181

• protonation or quaternization of neutral precursors (imidazoles, amines, phosphines, pyridine or sulfides) with Brønsted acids or haloalkanes/dialkylsulfates, respectively. In the next step, a variety of ionic liquids are obtainable by anion exchange, either through direct treatments with Lewis acids or by

Beyond catalyst deactivation: cross-metathesis involving olefins containing N-heteroaromatics

• Kevin Lafaye,
• Cyril Bosset,
• Lionel Nicolas,
• Amandine Guérinot and
• Janine Cossy

Beilstein J. Org. Chem. 2015, 11, 2223–2241, doi:10.3762/bjoc.11.241

• catalyst (Scheme 15). The use of an acidic additive also allowed the synthesis of fused bicyclic imidazoles through a GII-catalyzed RCM reaction (Scheme 16) [53]. Only few examples of RCM involving dienes that contain N-heteroaromatics were described on non-protonated species. In 2001, in the course of

• moieties such as pyridines, pyrimidines, imidazoles and pyrazoles (Scheme 37). From the selected examples discussed above, we tried to delineate some trends regarding to the use of alkenes possessing N-heteroaromatics in RCM and CM. In RCM, GI and GII are usually preferred and diluted conditions are

Recent advances in copper-catalyzed C–H bond amidation

• Jie-Ping Wan and
• Yanfeng Jing

Beilstein J. Org. Chem. 2015, 11, 2209–2222, doi:10.3762/bjoc.11.240

• of o-halobenzamides 82 and (benzo)imidazoles 87 for the one-pot synthesis of (benzo)imidazoquinazolinones 88 under the catalysis of CuI and assistance of L-proline. A subsequent oxidation using molecular oxygen was required for the final formation of products. According to the results, the mechanism

Investigation on the reactivity of α-azidochalcones with carboxylic acids: Formation of α-amido-1,3-diketones and highly substituted 2-(trifluoromethyl)oxazoles

• Kandasamy Rajaguru,
• Arumugam Mariappan,
• Rajendran Suresh,
• Periasamy Manivannan and
• Shanmugam Muthusubramanian

Beilstein J. Org. Chem. 2015, 11, 2021–2028, doi:10.3762/bjoc.11.219

• . The N-(2-keto)amide skeleton is of particular interest, as it serves as a synthetic precursor for various small heterocyclic compounds such as imidazoles, oxazoles and thiazoles [7][8][9]. Azirine, the smallest nitrogen-containing unsaturated three-membered heterocyclic system, is well known as a

Fe(II)/Et₃N-Relay-catalyzed domino reaction of isoxazoles with imidazolium salts in the synthesis of methyl 4-imidazolylpyrrole-2-carboxylates, its ylide and betaine derivatives

• Ekaterina E. Galenko,
• Olesya A. Tomashenko,
• Alexander F. Khlebnikov,
• Mikhail S. Novikov and
• Taras L. Panikorovskii

Beilstein J. Org. Chem. 2015, 11, 1732–1740, doi:10.3762/bjoc.11.189

• -imidazoles based on the formation of a pyrrole ring via the reaction of 2H-azirines with 1-alkyl-3-phenacyl-1H-imidazolium bromides [29], in which one example of the synthesis of ethyl 4-imidazolylpyrrole-2-carboxylate from ethyl 3-methyl-2H-azirine-2-carboxylate was described. Earlier it was found that

• hydrolyzing the ester group. Ylides 2 can also be debenzylated, affording the corresponding pyrrolyl imidazoles 12. Thus, ylide 2h was debenzylated on Pd/C with hydrogen to produce methyl 5-(4-fluorophenyl)-4-(1H-imidazol-1-yl)-3-phenyl-1H-pyrrole-2-carboxylate (12d) in quantitive yield. As mentioned above

Cyclodextrin–polysaccharide-based, in situ-gelled system for ocular antifungal delivery

• Anxo Fernández-Ferreiro,
• Noelia Fernández Bargiela,
• María Santiago Varela,
• Maria Gil Martínez,
• Maria Pardo,
• Antonio Piñeiro Ces,
• José Blanco Méndez,
• Miguel González Barcia,
• Maria Jesus Lamas and
• Francisco.J. Otero-Espinar

Beilstein J. Org. Chem. 2014, 10, 2903–2911, doi:10.3762/bjoc.10.308

• ]. Specifically, azole-based medications, which include imidazoles (e.g., miconazole, clotrimazole, and ketoconazole) and triazoles (e.g., fluconazole, itraconazole, posaconazole, and voriconazole), inhibit ergosterol synthesis in the cell wall [4]. Fluconazole is considered to be a good therapeutic option for

Microwave-assisted Cu(I)-catalyzed, three-component synthesis of 2-(4-((1-phenyl-1H-1,2,3-triazol-4-yl)methoxy)phenyl)-1H-benzo[d]imidazoles

• Yogesh Kumar,
• Vijay Bahadur,
• Anil K. Singh,
• Virinder S. Parmar,
• Erik V. Van der Eycken and
• Brajendra K. Singh

Beilstein J. Org. Chem. 2014, 10, 1413–1420, doi:10.3762/bjoc.10.145

• Leuven (KU Leuven), Celestijnenlaan 200F, B-3001 Leuven, Belgium 10.3762/bjoc.10.145 Abstract A microwave-assisted synthesis of 2-(4-((1-phenyl-1H-1,2,3-triazol-4-yl)methoxy)phenyl)-1H-benzo[d]imidazoles from a phenylazide, propargyloxybenzaldehyde and a 1,2-diaminobenzene is proposed. Keywords

• effective than the sum of their individual components. The therapeutic application of 2-(3-fluoro-phenyl)-1-[1-(substituted-phenyl)-1H-[1,2,3]-triazol-4-yl-methyl)-1H-benzo[d]imidazoles has been demonstrated by treating tuberculosis[19]. However, there has been little progress in the development of such

• first, followed by the formation of triazole by CuAAC reaction to give the desired product 4a. Conclusion We developed a novel microwave-assisted, Cu(I)-catalyzed, three-component reaction for the synthesis of 2-(4-((1-phenyl-1H-1,2,3-triazol-4-yl)methoxy)phenyl)-1H-benzo[d]imidazoles in good to

Silver and gold-catalyzed multicomponent reactions

• Giorgio Abbiati and
• Elisabetta Rossi

Beilstein J. Org. Chem. 2014, 10, 481–513, doi:10.3762/bjoc.10.46

• electron-rich and electron-poor anilines are suitable partners for these reactions, whereas alkylamines and benzylamine gave worse results. Moreover, the third partner (Nu in Scheme 19) is limited to one substrate as in the reaction employing diethyl phosphite (32). Indoles 30 and imidazoles 31 can bear

Recent advances in transition metal-catalyzed Csp²-monofluoro-, difluoro-, perfluoromethylation and trifluoromethylthiolation

• Grégory Landelle,
• Armen Panossian,
• Sergiy Pazenok,
• Jean-Pierre Vors and
• Frédéric R. Leroux

Beilstein J. Org. Chem. 2013, 9, 2476–2536, doi:10.3762/bjoc.9.287

• base and an oxidant. The reaction conditions had to be slightly customized for each class of substrates. The methodology was first developed for 2-substituted 1,3,4-oxadiazoles (Cu(OAc)2/1,10-phenanthroline/t-BuONa/NaOAc/air, Table 20), then extended to benzo[d]oxazoles, benzo[d]imidazoles, benzo[d

• ]thiazoles, imidazoles and polyfluorobenzenes (same system but di-tert-butyl peroxide as oxidant instead of air, Table 21); the nature of the copper(II) salt, the base and the oxidant had to be reassessed for the reaction of indoles (Cu(OH)2/1,10-phenanthroline/KF/Ag2CO3). Interestingly, the results obtained

• [114] as well as of various arenes and heteroarenes (pyridines, pyrimidines, pyrazines, quinolines, pyrroles, thiophenes, furans, pyrazoles, imidazoles, thiazoles, oxazoles, thiadiazoles, triazoles) [115]. The yields were low to excellent, depending on the substrate (Scheme 12 and Figure 20). Iron(II

Microwave-assisted synthesis of 5,6-dihydroindolo[1,2-a]quinoxaline derivatives through copper-catalyzed intramolecular N-arylation

• Fei Zhao,
• Lei Zhang,
• Hailong Liu,
• Shengbin Zhou and
• Hong Liu

Beilstein J. Org. Chem. 2013, 9, 2463–2469, doi:10.3762/bjoc.9.285

• , the copper-catalyzed N-arylation has been extensively utilized for C–N coupling, especially for the arylation of N-containing heterocycles such as indoles, imidazoles, indazoles, pyrroles, pyrazoles and triazoles [25][26][27][28] to construct more fused heterocycles. In recent years, several

An overview of the synthetic routes to the best selling drugs containing 6-membered heterocycles

• Marcus Baumann and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2013, 9, 2265–2319, doi:10.3762/bjoc.9.265

N-Heterocyclic carbene–palladium catalysts for the direct arylation of pyrrole derivatives with aryl chlorides

• Ismail Özdemir,
• Nevin Gürbüz,
• Nazan Kaloğlu,
• Öznur Doğan,
• Murat Kaloğlu,
• Christian Bruneau and
• Henri Doucet

Beilstein J. Org. Chem. 2013, 9, 303–312, doi:10.3762/bjoc.9.35

• carbene ligand, was reported by Lee and co-workers for the direct arylation of imidazoles with some aryl chlorides [46]. However, to our knowledge, N-heterocyclic carbene ligands have not yet been employed for the palladium-catalyzed direct arylation of pyrroles with aryl chlorides. As carbene ligands

A quantitative approach to nucleophilic organocatalysis

• Herbert Mayr,
• Sami Lakhdar,
• Biplab Maji and
• Armin R. Ofial

Beilstein J. Org. Chem. 2012, 8, 1458–1478, doi:10.3762/bjoc.8.166

• , N, sN, and E, one generally has to tolerate deviations up to factors of 10 to 100 [2][3][5]. However, an even better agreement between calculated and experimental values was observed for the reactions of 3a with imidazoles 15 (Figure 10) [58]. These additions are highly reversible, however, and the

• adducts could only be isolated when the reaction mixtures containing 16 (for R2 = H) were worked up with dry K2CO3. Aqueous workup led to regeneration of the reactants. Vicario’s report that imidazoles, in contrast to triazoles and tetrazoles, do not readily undergo iminium activated additions to α,β

• the imidazoles 15 with the iminium ion 3a [58]. Plots of log k2 for the reactions of enamides 17a–17e with the benzhydrylium ions 18a–d in CH3CN at 20 °C versus the electrophilicity parameters (E). Comparison of the nucleophilicities of enamides 17 with those of several other C nucleophiles (solvent

Imidazole as a parent π-conjugated backbone in charge-transfer chromophores

• Jiří Kulhánek and
• Filip Bureš

Beilstein J. Org. Chem. 2012, 8, 25–49, doi:10.3762/bjoc.8.4

• intramolecular charge transfer (ICT) are reviewed. Design, synthetic pathways, linear and nonlinear optical properties, electrochemistry, structure–property relationships, and the prospective application of such D-π-A organic materials are described. This review focuses on Y-shaped imidazoles, bi- and

• -A)2 and A-π-IM-(π-D)2 push–pull systems. An initial effort to synthesize and apply azole derivatives as CT chromophores and to study their optical (non)linearities can be ascribed to Moylan, Miller, and co-workers as early as 1993 [31][32]. Donor–acceptor-substituted imidazoles, oxazoles, and

• and chromophores 7a–c [33] featuring a thiophene π-linker and a nitrostyryl acceptor. The molecular structures of compounds 6 and 5c were also confirmed by X-ray analysis [34]. The last series of investigated compounds involved donor 4,5-disubstituted imidazoles 8a–d [35] with acceptors at C2 linked

Recent advances in direct C–H arylation: Methodology, selectivity and mechanism in oxazole series

• Cécile Verrier,
• Pierrik Lassalas,
• Laure Théveau,
• Guy Quéguiner,
• François Trécourt,
• Francis Marsais and
• Christophe Hoarau

Beilstein J. Org. Chem. 2011, 7, 1584–1601, doi:10.3762/bjoc.7.187

• to the preparation of two potential inhibitors of vascular endothelial growth factor receptor-2 (Scheme 5) [38][39]. In 1998, Miura reported the first study of Pd(0)-catalyzed direct arylation of imidazoles, oxazoles and thiazoles with iodo- and bromobenzene [40]. It was notably shown that the use of

• the reactivity at the C2 position significantly. Tamagnan further reported the first example of Pd(0)/Cu(I)-catalyzed direct arylation of benzoxazole (Scheme 7) [41]. Interestingly, Bellina and Rossi reported the Pd(0)/Cu(I)-catalyzed direct arylation of indoles, imidazoles, oxazoles and thiazoles

• ) [66]. Palladium- and copper-catalyzed direct (hetero)arylation with halides: Progress in mechanisms Regarding the C5>C4>C2-reactivity scale of electron-rich azoles under electrophilic reaction, Miura proposed an SEAr-type mechanism for selective C5-arylation of imidazoles, thiazoles and oxazoles. [40

Advances in synthetic approach to and antifungal activity of triazoles

• Kumari Shalini,
• Nitin Kumar,
• Sushma Drabu and
• Pramod Kumar Sharma

Beilstein J. Org. Chem. 2011, 7, 668–677, doi:10.3762/bjoc.7.79

• azoles are a class of synthetic compounds that possess one or more azole rings. Whilst both imidazole and triazole are five membered ring heterocycles, imidazole contains two ring nitrogen atoms, whereas triazoles have three. However, compared with imidazoles (clotrimazole, ketoconazole, miconazole

An overview of the key routes to the best selling 5-membered ring heterocyclic pharmaceuticals

• Marcus Baumann,
• Ian R. Baxendale,
• Steven V. Ley and
• Nikzad Nikbin

Beilstein J. Org. Chem. 2011, 7, 442–495, doi:10.3762/bjoc.7.57

• crystallisations. In addition, the racemisation of the undesired enantiomer via methyl ester formation and treatment with sodium hydroxide was found to be feasible allowing efficient recycling of this material [47]. Imidazoles Imidazole is an important biological building block being present in the amino acid

• , with cimetidine being an exception. The use of such compounds has now been almost completely superseded by the prescription of alternative proton pump inhibitors such as esomeprazole. Imidazole containing drugs can be subdivided into two classes: monocyclic imidazoles and benzimidazoles. The former is

• (Scheme 35). Mechanistic studies showed that the related imidoyl compounds do not themselves undergo ring closure to form imidazoles and it was therefore proposed that the reaction between carbon tetrachloride and triphenylphosphine to generate dichlorotriphenylphosphorane and (dichloromethylene

Palladium- and copper-mediated N-aryl bond formation reactions for the synthesis of biological active compounds

• Carolin Fischer and
• Burkhard Koenig

Beilstein J. Org. Chem. 2011, 7, 59–74, doi:10.3762/bjoc.7.10

• resulted in good yields [4][26]. Copper-diamine-catalysed N-arylation facilitated the arylation of pyrroles, pyrazoles, indazoles, imidazoles, triazoles, benzimidazoles and indoles [27][28][29]. Besides aryl halides as the aryl donor, arylsiloxanes [30], arylstannanes [31], iodonium salts [32], aryl lead

• temperature [35][36] and in aqueous solution [37]. However, the reactions are very slow and require several hours or even days for completion [38]. In general, there are a wide variety of protocols describing the metal-mediated arylation of amines [17][37][39], amides [38], imides [38], imidazoles [14][37][40

Aromatic and heterocyclic perfluoroalkyl sulfides. Methods of preparation

• Vladimir N. Boiko

Beilstein J. Org. Chem. 2010, 6, 880–921, doi:10.3762/bjoc.6.88

• activation [83][84] (Scheme 17). Similarly, some five membered heterocycles with two heteroatoms [N-Ac- and N-(SO2Alk)-thiazoles, 1-Me-2-SCH2CF3- and 1,2-Me2-imidazoles] undergo single trifluoromethylsulfanylation on heating (60 °C) with CF3SCl in a pyridine-chloroform mixture [83]. Interestingly, unlike 1,2

N-Arylation of amines, amides, imides and sulfonamides with arylboroxines catalyzed by simple copper salt/EtOH system

• Zhang-Guo Zheng,
• Jun Wen,
• Na Wang,
• Bo Wu and
• Xiao-Qi Yu

Beilstein J. Org. Chem. 2008, 4, No. 40, doi:10.3762/bjoc.4.40

• temperature, even reflux conditions. It is very dangerous to introduce oxygen or air into a reactor to regenerate the Cu catalyst under reflux condition because of possible explosion and fire hazards especially on large scale. Recently, Kantam et al. reported the N-arylation of imidazoles and amines with

• corresponding products in lower yield (Table 5, entry 19). A series of substituted imidazoles (Table 5, entries 5–8) and imides (Table 5, entries 1–4) were coupled with arylboroxine under the generalized reaction conditions to afford the corresponding products in excellent yields, which are comparable to the

Inversion symmetry and local vs. dispersive interactions in the nucleation of hydrogen bonded cyclic n-mer and tape of imidazolecarboxamidines

• Sihui Long,
• Venkatraj Muthusamy,
• Peter G. Willis,
• Sean Parkin and
• Arthur Cammers

Beilstein J. Org. Chem. 2008, 4, No. 23, doi:10.3762/bjoc.4.23

• polymers (tape) [9][10], cyclic n-mers [2][11][12], or dimers. For example, imidazolecarboxamidines 2 and imidazoles 3 have similar hydrogen bonding options offering sp2-NH hydrogen bond donors and sp2-N atom hydrogen bond acceptors. However 3 directs the hydrogen bond donor and acceptor approximately

• molecules in Table 1 were synthesized by combining imidazoles with commercially available carbodiimides as in Figure 2. Even though the synthesis is easy, these molecules are very rare in the chemical literature. The products were crystallized under various conditions. In one of 21 syntheses, (R1 = NH2) a

• carboxamidines from commercial imidazoles and carbodiimides furnished a series of crystalline phases with related hydrogen bonding. The NCNC dihedral angle, θ, between the hydrogen bond donors and acceptors, was assigned values between +180° and −180°. Structures with opposite signs are conformational

Cobalt(II) chloride catalyzed one-pot synthesis of α-aminonitriles

• Surya K. De

Beilstein J. Org. Chem. 2005, 1, No. 8, doi:10.1186/1860-5397-1-8

• α-aminonitriles, which are useful intermediates for the synthesis of amino acids and nitrogen-containing heterocycles such as thiadiazoles, imidazoles, etc [2][3]. They are usually prepared by the nucleophilic addition of cyanide anion to imines. Numerous methods describing the preparation of α