Supercritical carbon dioxide: a solvent like no other

• Jocelyn Peach and
• Julian Eastoe

Beilstein J. Org. Chem. 2014, 10, 1878–1895, doi:10.3762/bjoc.10.196

• chain, due to poor solvency of styrene in CO2. It was anticipated that π–π stacking between phenyl groups is a main contributor to the viscosity increase, through its provision of a fundamental intermolecular force needed to raise viscosity in a system. The optimum composition of polymers for viscosity

Influence of perylenediimide–pyrene supramolecular interactions on the stability of DNA-based hybrids: Importance of electrostatic complementarity

• Christian B. Winiger,
• Simon M. Langenegger,
• Oleg Khorev and
• Robert Häner

Beilstein J. Org. Chem. 2014, 10, 1589–1595, doi:10.3762/bjoc.10.164

• Christian B. Winiger Simon M. Langenegger Oleg Khorev Robert Haner Department of Chemistry and Biochemistry, University of Bern, Freiestrasse 3, CH-3012 Bern, Switzerland 10.3762/bjoc.10.164 Abstract Aromatic π–π stacking interactions are ubiquitous in nature, medicinal chemistry and materials

• interaction indicating the importance of electrostatic complementarity for aromatic π–π stacking interactions. Keywords: DNA; hybridization; nucleic acids; perylenediimide; pyrene; Introduction When two aromatic molecules are in close proximity they often have a tendency to interact non-covalently in a face

• -to-face stacking arrangement. Face-centered, parallel aromatic π–π stacking interactions have been studied and reviewed in great detail [1][2][3][4][5]. These interactions are especially important for polycyclic aromatic hydrocarbons (PAHs) [6][7]. The interaction is the result of solvophobicity, as

Pyrene-modified PNAs: Stacking interactions and selective excimer emission in PNA₂DNA triplexes

• Alex Manicardi,
• Lucia Guidi,
• Alice Ghidini and
• Roberto Corradini

Beilstein J. Org. Chem. 2014, 10, 1495–1503, doi:10.3762/bjoc.10.154

• induced by steric factors; moreover the large aromatic portion introduced with the pyrene ring can interact with the flanking bases of the strand through π–π stacking interactions, thus stabilizing the complex formed. For the evaluation of the sum of all this effects we measured the melting temperatures

Homochiral BINOL-based macrocycles with π-electron-rich, electron-withdrawing or extended spacing units as receptors for C₆₀

• Marco Caricato,
• Silvia Díez González,
• Idoia Arandia Ariño and
• Dario Pasini

Beilstein J. Org. Chem. 2014, 10, 1308–1316, doi:10.3762/bjoc.10.132

• complexes in solution give insights into the role of nonspecific host–guest interactions (such as π–π stacking) for the overall stabilization of the complexes. We are currently designing binaphthyl-based hosts for the enantioselective recognition and separation of higher fullerenes and chiral nanotubes

The Ugi four-component reaction as a concise modular synthetic tool for photo-induced electron transfer donor-anthraquinone dyads

• Sarah Bay,
• Gamall Makhloufi,
• Christoph Janiak and
• Thomas J. J. Müller

Beilstein J. Org. Chem. 2014, 10, 1006–1016, doi:10.3762/bjoc.10.100

• disordered water molecules were omitted for clarity) and the intra- and intermolecular π–π-stacking interactions between an inversion symmetry related pair (right, hydrogen atoms were omitted for clarity). Cyclic voltammogram of dyad 8c (recorded in CH2Cl2, T = 298 K, c (8c) = 0.1 mol·L−1, Pt working

Columnar/herringbone dual crystal packing of pyrenylsumanene and its photophysical properties

• Binod Babu Shrestha,
• Shuhei Higashibayashi and
• Hidehiro Sakurai

Beilstein J. Org. Chem. 2014, 10, 841–847, doi:10.3762/bjoc.10.80

• unidirectional columnar structures based on π–π stacking while the pyrene moieties generate herringbone structures due to CH–π interactions. The absorption and emission maxima of pyrenylsumanene were both red-shifted relative to those of sumanene and pyrene, owing to the extension of π-conjugation. Monomer

• distance of 3.0 Å (Figure 1f). The π–π stacking of pyrene moieties, however, is not evident in the arrangement. The UV–vis absorption and emission spectra and maxima as well as the quantum yields of 1, 3 and pyrene in CH2Cl2 or in the solid state are summarized in Figure 3 and Table 1. The absorption

Charge-transfer interaction mediated organogels from 18β-glycyrrhetinic acid appended pyrene

• Jun Hu,
• Jindan Wu,
• Qian Wang and
• Yong Ju

Beilstein J. Org. Chem. 2013, 9, 2877–2885, doi:10.3762/bjoc.9.324

• driving forces for the formation of such self-assembled fibrillar networks include hydrogen-bonding interaction, van der Waals force, π–π stacking, and donor–acceptor interaction [7][8][9][10]. Since LMWGs are often thermally reversible and the gelation can be triggered by pH or the addition of small

Topochemical control of the photodimerization of aromatic compounds by γ-cyclodextrin thioethers in aqueous solution

• Hai Ming Wang and
• Gerhard Wenz

Beilstein J. Org. Chem. 2013, 9, 1858–1866, doi:10.3762/bjoc.9.217

• . This result can be attributed to relatively efficient π–π stacking [48] The most stable syn-HH dimeric aggregate forms the most stable, and therefore, most abundant complex within the γ-CD cavity and consequently the main photo-product. Hence, the photodimerization of COU within host 2 is a

Self-assembly of 2,3-dihydroxycholestane steroids into supramolecular organogels as a soft template for the in-situ generation of silicate nanomaterials

• Valeria C. Edelsztein,
• Andrea S. Mac Cormack,
• Matías Ciarlantini and
• Pablo H. Di Chenna

Beilstein J. Org. Chem. 2013, 9, 1826–1836, doi:10.3762/bjoc.9.213

• , electrochemistry, light-harvesting materials and so on [1][2][3][4][5][6]. These small molecules self-assemble into regular supramolecular structures through non covalent interactions such as ion–ion, dipole–dipole, hydrogen bonding, π–π stacking, van der Waals, host–guest, and ion coordination, and in so doing

• , including the additional intermolecular contacts from the pending moieties linked at C-3 (usually hydrogen bond and π–π stacking), lead to a primarily one-dimensional long-range growth and finally produce the interconnected 3D self-assembled fibrillar network (SAFIN), which traps the solvent and turns into

Incorporation of perfluorohexyl-functionalised thiophenes into oligofluorene-truxenes: synthesis and physical properties

• Neil Thomson,
• Alexander L. Kanibolotsky,
• Joseph Cameron,
• Tell Tuttle,
• Neil J. Findlay and
• Peter J. Skabara

Beilstein J. Org. Chem. 2013, 9, 1243–1251, doi:10.3762/bjoc.9.141

• such as fullerene fragments [4] and liquid-crystalline compounds [5]. Positions C5, C10 and C15 can be functionalised with a range of substituents, commonly saturated alkyl chains, which can enhance the solubility and processability as well as reduce intermolecular π–π stacking [6], but there are also

Enhancement of efficiency in organic photovoltaic devices containing self-complementary hydrogen-bonding domains

• Rohan J. Kumar,
• Jegadesan Subbiah and
• Andrew B. Holmes

Beilstein J. Org. Chem. 2013, 9, 1102–1110, doi:10.3762/bjoc.9.122

• . The final scenario considered here is that the hydrogen-bonding-mediated interaction is immediately followed by a kinetically faster second supramolecular interaction, leading to the observation by 1H NMR of only the rate-limiting first step. π–π stacking interactions are observed for planar aromatic

Synthesis and testing of the first azobenzene mannobioside as photoswitchable ligand for the bacterial lectin FimH

• Vijayanand Chandrasekaran,
• Katharina Kolbe,
• Femke Beiroth and
• Thisbe K. Lindhorst

Beilstein J. Org. Chem. 2013, 9, 223–233, doi:10.3762/bjoc.9.26

• differs from many other docked FimH ligands. Here, the higher affinity for the open-gate FimH can be explained by strong π–π stacking of the first aromatic ring of the azobenzene unit with the tyrosine gate. As both isomers of 2 interact equally well with FimH, they can’t be used to switch type 1 fimbriae

Mechanochemistry assisted asymmetric organocatalysis: A sustainable approach

• Pankaj Chauhan and
• Swapandeep Singh Chimni

Beilstein J. Org. Chem. 2012, 8, 2132–2141, doi:10.3762/bjoc.8.240

• conditions in comparison to reactions carried out in solvent could be attributed to lower molecular motion due to increased hydrogen bonding between aldehyde and amidic NH, and more effective π–π-stacking interaction between the phenyl ring of the catalyst and aldehyde. The methyl ester of (S)-proline-(S

• large surface area of the lipophilic residue of the tryptophan, reinforced by the hydrophobic environment created by the addition of water, appears to be responsible for the improvement in diastereoselectivity. These factors also enhance the π–π stacking between the catalyst and aldehyde to form a more

Synthetic glycopeptides and glycoproteins with applications in biological research

• Ulrika Westerlind

Beilstein J. Org. Chem. 2012, 8, 804–818, doi:10.3762/bjoc.8.90

• tyrosine residues form the “tyrosine gate” [134]. By π–π stacking interactions with the aromatic tyrosine residues, monovalent α-mannose ligands containing hydrophobic aglycons, have shown increased binding affinities [128][135][136]. Employing multivalent ligands, the binding affinity to FimH could be

Azobenzene dye-coupled quadruply hydrogen-bonding modules as colorimetric indicators for supramolecular interactions

• Yagang Zhang and
• Steven C. Zimmerman

Beilstein J. Org. Chem. 2012, 8, 486–495, doi:10.3762/bjoc.8.55

• ]. Noncovalent hydrogen bonding, electrostatic interactions, π–π stacking and metal coordination have been used alone and in concert to assemble a broad range of building blocks, from small molecules [4][5][6][7] to polymers [8][9] including dendrimers [10][11]. Among these noncovalent interactions, hydrogen

Synthesis of mesomeric betaine compounds with imidazolium-enolate structure

• Nina Gonsior,
• Fabian Mohr and
• Helmut Ritter

Beilstein J. Org. Chem. 2012, 8, 390–397, doi:10.3762/bjoc.8.42

• in the space group P21/c (No. 14). The bond distances of O(3)–C and O(1)–C were 1.241(4) Å and 1.228(4) Å, respectively. These correspond to the values of the C=O double bonds. In the crystal packing, molecule layers were formed due to very weak π–π stacking of the aromatic rings (Figure 4

Double N-arylation reaction of polyhalogenated 4,4’-bipyridines. Expedious synthesis of functionalized 2,7-diazacarbazoles

• Mohamed Abboud,
• Emmanuel Aubert and
• Victor Mamane

Beilstein J. Org. Chem. 2012, 8, 253–258, doi:10.3762/bjoc.8.26

• diffraction and show π–π stacking involving the diazacarbazole moieties and the phenyl rings of functionalized groups. Keywords: 4,4’-bipyridine; cross-coupling; crystal packing; diazacarbazole; X-ray diffraction; Introduction Only a few examples of the preparation of diazacarbazoles have been reported [1

• crystal structure, it contributes to the cohesion of the molecular columns through C–H···π hydrogen bonds (H···π = 2.83 Å) (Figure 2a). However, in 12c the methylsulfanylphenyl groups are implied in the π–π stacking (interplanar distances of 3.261 Å and 3.549 Å). Such neighboring molecular columns

• use of the palladium-catalyzed double N-arylation of electron-rich anilines as the key reaction, the diazacarbazoles were regioselectively generated. Crystal structure determination shows that these molecules interact mainly through π–π stacking. The reported synthesis should widen the use of

Alkene selenenylation: A comprehensive analysis of relative reactivities, stereochemistry and asymmetric induction, and their comparisons with sulfenylation

• Vadim A. Soloshonok and
• Donna J. Nelson

Beilstein J. Org. Chem. 2011, 7, 744–758, doi:10.3762/bjoc.7.85

• with Ar* on Se in a π – π-stacking stabilization [33][34], is reported to give the major product. This produces asymmetric induction favoring the (S)-isomer in the reaction of 2 with the analogous phenyl substituted alkenols 4 (R2 = Ph, R3 = –(CH2)n–OH, n = 2 or 3) [33][34], as shown in Scheme 2 and

• with 4-phenyl-3-buten-1-ol (Scheme 2, Table 4, n = 2) gives product 6 with 84% de in 92% yield. When R = Et, the diastereoselectivity and yield decrease to 34% and 73% respectively. The higher level of asymmetric induction and yield in the case of R = Ph has been attributed to a stabilizing π–π

• stacking of alkene and electrophile substituents [33][34]. Results for 1 and 2 (n = 3) in Table 4 also, in general, follow this pattern. In the reactions of 1 or 2 with alkenols 4 (n = 3) (Scheme 2), the stabilizing effects of phenyl at the developing positive charge at the adjacent carbon are considered

Synthesis and self-assembly of 1-deoxyglucose derivatives as low molecular weight organogelators

• Guijun Wang,
• Hao Yang,
• Sherwin Cheuk and
• Sherman Coleman

Beilstein J. Org. Chem. 2011, 7, 234–242, doi:10.3762/bjoc.7.31

• class of small molecules that can form reversible supramolecular gels in organic solvents or aqueous solutions [1][2][3][4][5][6][7][8][9]. Non-covalent interactions such as hydrogen bonding, hydrophobic interactions, and π–π stacking are the main driving forces for the self-assembly of the gelators

Self-assembly and semiconductivity of an oligothiophene supergelator

• Pampa Pratihar,
• Suhrit Ghosh,
• Vladimir Stepanenko,
• Sameer Patwardhan,
• Ferdinand C. Grozema,
• Laurens D. A. Siebbeles and
• Frank Würthner

Beilstein J. Org. Chem. 2010, 6, 1070–1078, doi:10.3762/bjoc.6.122

• -type aggregate to monomeric building blocks at elevated temperature. The self-assembly of T1 at such low concentrations can be attributed to the synergistic effect of π-π-stacking among the oligothiophene chromophores and intermolecular hydrogen bonding between the amide groups of the neighbouring

Redox-active tetrathiafulvalene and dithiolene compounds derived from allylic 1,4-diol rearrangement products of disubstituted 1,3-dithiole derivatives

• Filipe Vilela,
• Peter J. Skabara,
• Christopher R. Mason,
• Thomas D. J. Westgate,
• Asun Luquin,
• Simon J. Coles and
• Michael B. Hursthouse

Beilstein J. Org. Chem. 2010, 6, 1002–1014, doi:10.3762/bjoc.6.113

• motif for materials applications. For example, benzyl and thienyl annelated TTF derivatives and analogues have been shown to perform well as semiconductor materials in organic field effect transistors (OFETs) [21][22]. This has been attributed to the enhanced π–π stacking of the extended aromatic groups

Differences between β-Ala and Gly-Gly in the design of amino acids-based hydrogels

• Andreea Pasc,
• Firmin Obounou Akong,
• Sedat Cosgun and
• Christine Gérardin

Beilstein J. Org. Chem. 2010, 6, 973–977, doi:10.3762/bjoc.6.109

• properties were related to hydrogen bonding, hydrophobic interactions and π-π stacking. Herein, β-Ala-His-EO2-Alk was fully characterised by FT-IR, NMR, SAXS and SEM and the gelation mechanism is discussed. It appears that the number of amide groups determines the self-assembling behaviour into 1D or 2D/3D

• as electrostatic, hydrogen bonding, dipole–dipole, π–π stacking and hydrophobic/van der Waals interactions. Since the cross-links between fibres are non-covalent in nature, LMWHs exhibit thermoreversibility, rapid response to external stimuli (i.e., stirring, sonication). Among these LMWHs, amino

• hydrophilic and hydrophobic modules, as well as the number of H-donor and H-acceptor centers, or π–π stacking. Therefore the appropriate balance between all these factors must be determined. As a part of the ongoing research carried out in our laboratory on the self-assembled systems of amino acids-based

Pyridinium based amphiphilic hydrogelators as potential antibacterial agents

• Sayanti Brahmachari,
• Sisir Debnath,
• Sounak Dutta and
• Prasanta Kumar Das

Beilstein J. Org. Chem. 2010, 6, 859–868, doi:10.3762/bjoc.6.101

• hydrophobic interactions is mandatory for any gelation process. Non-covalent interactions such as hydrogen bonding, ionic interactions, π–π stacking or van der Waals forces play a pivotal role in self-assembled gelation [12]. Tuning the structure of gelator molecules leads to a better understanding of the

• gelation. The planar aromatic moiety favors π–π stacking interactions between the molecules and leads to the formation of 3D networks of viscoelastic gels [25][26][27]. Interestingly, among all these aromatic rings, the positively charged pyridine (pyridinium) unit is well known to impart antibacterial

• pyridinium moieties in order to exploit its favorable π–π stacking interaction towards self-assembled gelation as well as an ability to kill bacteria. Furthermore, a very simple method of synthesizing such amphiphilic antibacterial hydrogelators with pyridinium units would definitely boost its importance and

Chiral gels derived from secondary ammonium salts of (1R,3S)-(+)-camphoric acid

• Tapas Kumar Adalder,
• N. N. Adarsh,
• Ravish Sankolli and
• Parthasarathi Dastidar

Beilstein J. Org. Chem. 2010, 6, 848–858, doi:10.3762/bjoc.6.100

• can be of two kinds – chemical or polymeric and physical or supramolecular. While covalent bonds are responsible for the formation of 3-D networks in chemical gels, various non-covalent interactions such as hydrogen bonding, π-π stacking, hydrophobic, van der Waals forces etc. are required to form gel

• sustained by weak π-π stacking interactions (3.926 Å) involving the phenyl groups of the neighboring 2-D sheets (Figure 6). Crystals of DCHADC 1 was grown from m-xylene. It was crystallized in the non-centrosymmetric monoclinic space group P21. The C–O distance of the carboxylic acid moieties are 1.226(10

Organic gelators and hydrogelators

• Jean-Pierre Desvergne

Beilstein J. Org. Chem. 2010, 6, 846–847, doi:10.3762/bjoc.6.99

• liquid) which behaves as a visco-elastic material (soft matter) due to the immobilization of solvent molecules in a three-dimensional network. This network results from the self-assembly of the gelling agent into fibres via non-covalent interactions such as hydrogen bonding, π–π stacking, van der Waals