A review of recent advances in electrochemical and photoelectrochemical late-stage functionalization classified by anodic oxidation, cathodic reduction, and paired electrolysis

• Nian Li,
• Ruzal Sitdikov,
• Ajit Prabhakar Kale,
• Joost Steverlynck,
• Bo Li and
• Magnus Rueping

Beilstein J. Org. Chem. 2024, 20, 2500–2566, doi:10.3762/bjoc.20.214

Heterogeneous metallaphotoredox catalysis in a continuous-flow packed-bed reactor

• Wei-Hsin Hsu,
• Susanne Reischauer,
• Peter H. Seeberger,
• Bartholomäus Pieber and
• Dario Cambié

Beilstein J. Org. Chem. 2022, 18, 1123–1130, doi:10.3762/bjoc.18.115

• ) (Scheme 1). In analogy with the C–S coupling, a residence time of 3 hours was chosen for a test experiment, resulting in 81% conversion and 61% NMR yield. In this case a significant acceleration compared to the original batch reaction time (24 h) was observed, likely thanks to the use of the same reaction

• concentration as in the original batch report [28]. This was unlike the C–S coupling, where the limited solubility of the sulfinate salt required a dilution of the reaction conditions to obtain a homogenous reaction mixture. As previously observed [28], the reaction concentration has a significant impact on the

• efficiency of the nickel cycle in metallaphotoredox reactions. It is therefore not surprising that a larger acceleration of the reaction kinetics in flow versus batch was observed for the C–O coupling as opposed to the C–S coupling. Conclusion In summary, we developed a packed-bed reactor for

Catalyzed and uncatalyzed procedures for the syntheses of isomeric covalent multi-indolyl hetero non-metallides: an account

• Ranadeep Talukdar

Beilstein J. Org. Chem. 2021, 17, 2102–2122, doi:10.3762/bjoc.17.137

• (denoted as CuO@GO, 0.38 mol %) catalyzed S-arylation (C–S coupling) of 2-iodoindole (92) to synthesize diindol-2-ylsulfide (84) in 75% yield (Scheme 12) [79]. Here 1.5 equivalents of thiourea acted as the sulfur source. Bis(indol-3-yl)sulfides are also present as structural motifs in important organic

Selenophene-containing heterotriacenes by a C–Se coupling/cyclization reaction

• Pierre-Olivier Schwartz,
• Sebastian Förtsch,
• Astrid Vogt,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2019, 15, 1379–1393, doi:10.3762/bjoc.15.138

• properties provides interesting structure–property relationships and gives valuable insights into the role of heteroatoms within the series of the heterotriacenes. Electrooxidative polymerization led to the corresponding poly(heterotriacene)s P2–P4. Keywords: conducting polymer; C–S coupling; C–Se coupling

Metal-free C–H mercaptalization of benzothiazoles and benzoxazoles using 1,3-propanedithiol as thiol source

• Yan Xiao,
• Bing Jing,
• Xiaoxia Liu,
• Hongyu Xue and
• Yajun Liu

Beilstein J. Org. Chem. 2019, 15, 279–284, doi:10.3762/bjoc.15.24

• -catalyzed C–S coupling reactions [13]. Conventional methods for the synthesis of 2-mercaptobenzoxazoles and 2-mercaptobenzothiazoles include the interaction of 2-aminophenol or 2-haloanilines with carbon disulfide [14][15][16], or potassium ethyl xanthate [17][18] (Scheme 1). In 2017, the Dong group

• [22] and 1,2-ethanedithiol [23]. In the past decades, C–H functionalization has become an effective strategy for constructing different molecules directly from simple arenes and alkanes. C–H functionalization is an important method for C–S coupling reactions [24][25]. For example, transition metal

• system. Accordingly, developing a new and simple method for the synthesis of 2-mercaptobenzothiazoles and 2-mercaptobenzoxazoles is still desirable. As a continuous study on C–S coupling reactions using aliphatic dithiols, herein we reported a simple and effective method for converting benzothiazoles and

Transition-metal-free synthesis of 3-sulfenylated chromones via KIO₃-catalyzed radical C(sp²)–H sulfenylation

• Yanhui Guo,
• Shanshan Zhong,
• Li Wei and
• Jie-Ping Wan

Beilstein J. Org. Chem. 2017, 13, 2017–2022, doi:10.3762/bjoc.13.199

• . Presently, the most popular approaches in constructing a C(sp2)–S bond are the transition-metal-catalyzed Ullmann C–S coupling reaction [4][5][6][7][8], Chan–Lam cross-coupling reaction [9][10][11][12] as well as the transition-metal-catalyzed C–H bond activation [13][14][15]. Recently, as a new trend, the

Ni nanoparticles on RGO as reusable heterogeneous catalyst: effect of Ni particle size and intermediate composite structures in C–S cross-coupling reaction

• Debasish Sengupta,
• Koushik Bhowmik,
• Goutam De and
• Basudeb Basu

Beilstein J. Org. Chem. 2017, 13, 1796–1806, doi:10.3762/bjoc.13.174

• ], and bismuth [13] have been used with specific electron-rich ligands in the C–S coupling reactions. However, these are less common compared to other C–X (X = C, O, N, P) coupling reactions, presumably because sulfur might suppress the catalytic function through its coordinating and adsorptive

• of NPs or further oxidation of Ni NPs in the absence of the electron-rich RGO surface. Thus, the average size of Ni NPs supported with electron-rich RGO surface seems to be important to obtain maximum catalytic efficiency in the C–S coupling reaction. The catalytic reaction was found to be scalable

• -withdrawing groups has been noticed, which is in agreement with previously reported results in C–S coupling reactions [19]. In the case of iodobromoarenes or iodochloroarenes, we obtained only iodo-coupled products 3j and 3k in excellent yields (Table 2, entries 10 and 11). Bromoarenes remain unchanged under

Transition-metal-catalyzed synthesis of phenols and aryl thiols

• Yajun Liu,
• Shasha Liu and
• Yan Xiao

Beilstein J. Org. Chem. 2017, 13, 589–611, doi:10.3762/bjoc.13.58

• before the formation of copper complex. In 2016, the Wang and Shi group reported a CuI-catalyzed C–H hydroxylation of thiophenols, in which disulfide directed the hydroxylation [58]. Using aryl thiol and arylboronic acid as starting materials, C–H hydroxylation and C–S coupling sequentially occurred in

Efficient Cu-catalyzed base-free C–S coupling under conventional and microwave heating. A simple access to S-heterocycles and sulfides

• Silvia M. Soria-Castro and
• Alicia B. Peñéñory

Beilstein J. Org. Chem. 2013, 9, 467–475, doi:10.3762/bjoc.9.50

• ), this Cu-catalyzed C–S coupling reaction being highly chemoselective for aryl iodides. In comparison with the already reported procedure for the preparation of S-aryl thioacetates by Pd catalysis [51][56], the methodology herein described has the advantages of using a lower-cost copper salt and a stable

• % isolated yields, respectively (Scheme 4). Compounds 7 and 6 derive from the previous C–S coupling reaction. Thus, the expected 2-(acetylthio)benzoate (10) undergoes a series of acyl transfers, and therefore, thioanhydride 12, and consecutively compound 8, are formed. Irreversible oxidation of the latter

• . Electron-donor and electron-acceptor substituents are tolerated, and polysubstitution can also be successfully accomplished. Experimental Representative experimental procedures for the Cu-catalyzed base-free C–S coupling Method A: The reactions were carried out in a 10 mL two-necked Schlenk tube, equipped