The Groebke–Blackburn–Bienaymé reaction in its maturity: innovation and improvements since its 21st birthday (2019–2023)

• Cristina Martini,
• Muhammad Idham Darussalam Mardjan and
• Andrea Basso

Beilstein J. Org. Chem. 2024, 20, 1839–1879, doi:10.3762/bjoc.20.162

• inert atmosphere and oxidizing 64 in the presence of CoBr2 (Scheme 24, conditions c and d; one-pot: 10–43%, two steps: 11–37% yields). Interestingly, polycycles 69 were formed when I2 was employed as the oxidant (Scheme 24, conditions e), which was presumably due to the coordination between the oxidant

• aza-Michael addition, leading to the benzoxazepinium triflate salt 89. To broaden the scope of the reaction, 2-aminopyrazine and 2-aminoquinoline were also introduced to the one-pot process, furnishing 6-7-5-6 and 6-7-5-6-6 polycycles, respectively (not shown). Chen et al. [63] developed an

Synthesis of substituted 8H-benzo[h]pyrano[2,3-f]quinazolin-8-ones via photochemical 6π-electrocyclization of pyrimidines containing an allomaltol fragment

• Constantine V. Milyutin,
• Andrey N. Komogortsev,
• Boris V. Lichitsky,
• Mikhail E. Minyaev and
• Valeriya G. Melekhina

Beilstein J. Org. Chem. 2023, 19, 778–788, doi:10.3762/bjoc.19.58

• that an alternative option for blocking ESIPT-induced processes for allomaltol derivatives is the use of DMF as a solvent [24]. Based on this fact, we assumed that the photoreaction in DMF would also allow the conversion of the starting pyrimidines 9 into the corresponding polycycles 12. However, the

• Scheme S5 in Supporting Information File 1). Based on the obtained results, we have developed a preparative telescopic method for the synthesis of polycycles 12. The presented two-step one-pot approach includes the preliminary photoconversion of the starting pyrimidines 9 in DMF to the corresponding

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

• of MWA-MCR in the construction of fused polycycles with functional diversity for the generation of a library of pharmacologically active molecules. The construction of fused annulated rings are seldomly reported often achieved by a sequential addition approach [40]. Contributing to the same and

Synthetic approaches to bowl-shaped π-conjugated sumanene and its congeners

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 2212–2259, doi:10.3762/bjoc.16.186

Highly selective Diels–Alder and Heck arylation reactions in a divergent synthesis of isoindolo- and pyrrolo-fused polycyclic indoles from 2-formylpyrrole

• Carlos H. Escalante,
• Eder I. Martínez-Mora,
• Carlos Espinoza-Hicks,
• Alejandro A. Camacho-Dávila,
• Fernando R. Ramos-Morales,
• Francisco Delgado and
• Joaquín Tamariz

Beilstein J. Org. Chem. 2020, 16, 1320–1334, doi:10.3762/bjoc.16.113

• simplest pyrrole-fused heterocyclic aza-bridged compounds. The numerous series of pyrrolizine-containing polycycles include pyrrolo[2,1-a]isoindoles [6], pyrrolo[1,2-a]indoles [7][8][9][10] and isoindolo[2,1-a]indoles [11] (Figure 1). These three series constitute the core of natural occurring alkaloids

• pyrrolizine-containing polycycles, including isoindolo[2,1-a]indole-based tetrahydro and fully aromatic pentacycles. These findings reveal the synthetic value of 2-formylpyrrole (13a) for the diastereo- and regioselective construction of isoindolo- and pyrrolo-fused polycyclic indoles. Theoretical

AgNTf₂-catalyzed formal [3 + 2] cycloaddition of ynamides with unprotected isoxazol-5-amines: efficient access to functionalized 5-amino-1H-pyrrole-3-carboxamide derivatives

• Ziping Cao,
• Jiekun Zhu,
• Li Liu,
• Yuanling Pang,
• Laijin Tian,
• Xuejun Sun and
• Xin Meng

Beilstein J. Org. Chem. 2019, 15, 2623–2630, doi:10.3762/bjoc.15.255

• tethered to cyclohexadienones that can be converted into complex polycycles by Ag-carbenoid-initiated cascades [16]. Recently, Zhu’s group developed a tandem 1,3‑dipolar cycloaddition/cyclopropanation silver-catalyzed reaction of enynals with alkenes [17]. In our previous studies, this silver carbene

Domino ring-opening–ring-closing enyne metathesis vs enyne metathesis of norbornene derivatives with alkynyl side chains. Construction of condensed polycarbocycles

• Ritabrata Datta and
• Subrata Ghosh

Beilstein J. Org. Chem. 2018, 14, 2708–2714, doi:10.3762/bjoc.14.248

• system. Domino metathesis of oxa- and aza-norbornenes with alkyne side chains [38][39][40] as well as norbornene derivatives having ether linked alkynes [41][42] in combination with Diels–Alder reaction of the resulting 1,3-dienes have been investigated to construct polycycles with heteroatoms. In spite

• polycycles from metathesis of norbornene derivatives with alkynyl side-chain. This investigation demonstrated that domino metathesis of norbornene derivatives with alkynyl side-chain requires metathesis initiation at the acetylene unit. Further, the nature of functional groups as well as the substrate

Synergistic approach to polycycles through Suzuki–Miyaura cross coupling and metathesis as key steps

• Sambasivarao Kotha,
• Milind Meshram and
• Chandravathi Chakkapalli

Beilstein J. Org. Chem. 2018, 14, 2468–2481, doi:10.3762/bjoc.14.223

• with Suzuki–Miyaura cross coupling in combination with metathesis (or vice-versa). Several cyclophanes, polycycles, macrocycles, spirocycles, stilbenes, biaryls, and heterocycles have been synthesized by employing a combination of Suzuki cross-coupling and metathesis. Various popular reactions such as

• ; metathesis; polycycles; Suzuki–Miyaura cross coupling; Introduction Transition-metal catalysts are used in metathesis and cross-coupling reactions. Such advances have opened the door for efficient construction of C–C bonds in organic synthesis. These catalysts tolerate diverse functional groups and the

• organic synthesis and green chemistry. Various catalysts used for metathesis reactions. Various angucyclines. SM coupling and RCM protocol to substituted indene derivative 10. Synthesis of polycycles via SM and RCM approach. SM coupling and RCM protocol to the benz[a]anthracene skeleton 26. Synthesis of

Unpredictable cycloisomerization of 1,11-dien-6-ynes by a common cobalt catalyst

• Abdusalom A. Suleymanov,
• Dmitry V. Vasilyev,
• Valentin V. Novikov,
• Yulia V. Nelyubina and
• Dmitry S. Perekalin

Beilstein J. Org. Chem. 2017, 13, 639–643, doi:10.3762/bjoc.13.62

• polycycles [8][11][12][13] (Scheme 1). However, all these transformations require expensive noble metal catalysts with rather sophisticated ligands. Therefore, the development of a cheap catalyst for such reactions is highly desirable. Over the last decade the application of the cobalt catalytic system CoBr2

The synthesis of functionalized bridged polycycles via C–H bond insertion

• Jiun-Le Shih,
• Po-An Chen and
• Jeremy A. May

Beilstein J. Org. Chem. 2016, 12, 985–999, doi:10.3762/bjoc.12.97

• multiple structural isomers of bridged polycycles from a common intermediate offer multiple advantages: saved time and effort by avoiding the validation of new strategies for each target, accumulated understanding of the key reactions in the strategy for higher yields and improved efficiency, and rapid

• 1 or 3). This review highlights strategies that leverage C–H bond insertion by carbenes and nitrenes to construct bridged polycycles. This key bond-forming event may construct the bridged ring, or it may construct an additional ring fused to an existing bridged bicycle to synthesize the bridged

• cyclohexenone 21, which was an intermediate in Nicolau’s platensimycin synthesis [28]. Carbenes are not the only species that have been used to build bridged polycycles without metal catalysts. Masamune demonstrated that the nitrene generated from the acyl azide 22 via ultraviolet irradiation inserted into a

Recent applications of ring-rearrangement metathesis in organic synthesis

• Sambasivarao Kotha,
• Milind Meshram,
• Priti Khedkar,
• Shaibal Banerjee and
• Deepak Deodhar

Beilstein J. Org. Chem. 2015, 11, 1833–1864, doi:10.3762/bjoc.11.199

• have covered literature that appeared during the last seven years (2008–2014). Keywords: Diels–Alder chemistry; green chemistry; natural products; olefin metathesis; polycycles; ring-rearrangement metathesis; Introduction Transition metal–carbene complexes (Figure 1) introduced during the last two

• provide a simple and short synthetic route to complex polycycles containing the 2-aza-7-oxabicyclo[4.3.0]nonane framework. Blanchard and co-workers [58] have reported a novel protocol for the synthesis of spiro- and dispiroketals. The required oxabicyclic derivatives such as 280 were synthesized using α

Design and synthesis of polycyclic sulfones via Diels–Alder reaction and ring-rearrangement metathesis as key steps

• Sambasivarao Kotha and
• Rama Gunta

Beilstein J. Org. Chem. 2015, 11, 1373–1378, doi:10.3762/bjoc.11.148

• polycycles by RRM [27][28] as a key step, here we conceive unique examples where cis and trans ring junctions are produced in the RRM reactions. Results and Discussion Strategy Our retrosynthetic strategy to diverse sulfone derivatives is shown in Figure 1. The target sulfone derivatives 1 could be

Spiro annulation of cage polycycles via Grignard reaction and ring-closing metathesis as key steps

• Sambasivarao Kotha,
• Mohammad Saifuddin,
• Rashid Ali and
• Gaddamedi Sreevani

Beilstein J. Org. Chem. 2015, 11, 1367–1372, doi:10.3762/bjoc.11.147

Design and synthesis of fused polycycles via Diels–Alder reaction and ring-rearrangement metathesis as key steps

• Sambasivarao Kotha and
• Ongolu Ravikumar

Beilstein J. Org. Chem. 2015, 11, 1259–1264, doi:10.3762/bjoc.11.140

• used to design new polycycles. In this regard, ruthenium alkylidene catalysts are effective in realizing the RRM of bis-norbornene derivatives prepared by DA reaction and Grignard addition. Here, fused polycycles are assembled which are difficult to produce by conventional synthetic routes. Keywords

• : Diels–Alder reaction; Grignard addition; ring-rearrangement metathesis; polycycles; Introduction Design and synthesis of complex polycycles in a minimum number of steps will enhance the overall synthetic economy of the preparation of a target molecule. The ring-rearrangement metathesis (RRM) is a

• routes to polycycles. For successful application of this strategy it is desirable that the starting materials have ring strain so that they can readily undergo a C=C double bond cleavage. Release of ring strain is the main driving force for RRM. In this regard, bicyclo[2.2.1] and bicyclo[2.2.2] systems

Hybrid macrocycle formation and spiro annulation on cis-syn-cis-tricyclo[6.3.0.0^2,6]undeca-3,11-dione and its congeners via ring-closing metathesis

• Sambasivarao Kotha,
• Ajay Kumar Chinnam and
• Rashid Ali

Beilstein J. Org. Chem. 2015, 11, 1123–1128, doi:10.3762/bjoc.11.126

• new strategy based on Fischer indolization and ring-closing metathesis as the key steps. To develop a simple synthetic methodology to aza-polycycles and spiropolycycles from readily available starting materials [47][48][49][50][51][52], bicyclic, tricyclic and pentacyclic diones (1–3) were identified

Design and synthesis of novel bis-annulated caged polycycles via ring-closing metathesis: pushpakenediol

• Sambasivarao Kotha and
• Mirtunjay Kumar Dipak

Beilstein J. Org. Chem. 2014, 10, 2664–2670, doi:10.3762/bjoc.10.280

Copper–phenanthroline catalysts for regioselective synthesis of pyrrolo[3′,4′:3,4]pyrrolo[1,2-a]furoquinolines/phenanthrolines and of pyrrolo[1,2-a]phenanthrolines under mild conditions

• Rupankar Paira,
• Tarique Anwar,
• Maitreyee Banerjee,
• Yogesh P. Bharitkar,
• Shyamal Mondal,
• Sandip Kundu,
• Abhijit Hazra,
• Prakas R. Maulik and
• Nirup B. Mondal

Beilstein J. Org. Chem. 2014, 10, 692–700, doi:10.3762/bjoc.10.62

• these cycloadducts, as obvious from the ORTEP diagram presented in Figure 3. Conclusion In conclusion, a simple CuCl2–phenanthroline catalyzed methodology has been developed to synthesize a series of unique heteroaromatic polycycles 10a–h, 14a–g by a 1,3-dipolar cycloaddition reaction, using furo[3,2-h

Synthesis of 2,3,6,7-tetrabromoanthracene

• Christian Schäfer,
• Friederike Herrmann and
• Jochen Mattay

Beilstein J. Org. Chem. 2008, 4, No. 41, doi:10.3762/bjoc.4.41

• . Keywords: anthracene; arenes; cyclizations; polycycles; ring closure; 2,3,6,7-tetrabromoanthracene; Introduction Anthracene and its derivatives are long known polycyclic aromatic compounds showing a high potential for use in materials science (e.g. fluorescence probing, photochromic systems