Multimodal cantilevers with novel piezoelectric layer topology for sensitivity enhancement

Scholarly Works

• Coskun, M. B.; Soleymaniha, M.; Mahdavi, M.; Moheimani, S. O. R. Reference Module in Biomedical Sciences - Active Microcantilevers for Dynamic Mode Atomic Force Microscopy. Encyclopedia of Sensors and Biosensors; Elsevier, 2023; pp 617–642. doi:10.1016/b978-0-12-822548-6.00076-5
• Bem, N. F. d.; Ruppert, M. G.; Fleming, A. J.; Yong, Y. K. Simultaneous tip force and displacement sensing for AFM cantilevers with on-chip actuation: Design and characterization for off-resonance tapping mode. Sensors and Actuators A: Physical 2022, 338, 113496. doi:10.1016/j.sna.2022.113496
• Ruppert, M. G.; Martin-Jimenez, D.; Yong, Y. K.; Ihle, A.; Schirmeisen, A.; Fleming, A. J.; Ebeling, D. Experimental analysis of tip vibrations at higher eigenmodes of QPlus sensors for atomic force microscopy. Nanotechnology 2022, 33, 185503. doi:10.1088/1361-6528/ac4759
• Dou, Z.; Qian, J.; Li, Y.; Lin, R.; Wang, T.; Wang, J.; Cheng, P.; Xu, Z. Enhancing higher-order eigenmodes of AFM using bridge/cantilever coupled system. Micron (Oxford, England : 1993) 2021, 150, 103147. doi:10.1016/j.micron.2021.103147
• Ruppert, M. G.; de, N. F. S.; Fleming, A. J.; Yong, Y. K. Characterization of Active Microcantilevers Using Laser Doppler Vibrometry. Vibration Engineering for a Sustainable Future; Springer International Publishing, 2021; pp 355–361. doi:10.1007/978-3-030-48153-7_45
• Ruppert, M. G.; Fleming, A. J.; Yong, Y. K. Active atomic force microscope cantilevers with integrated device layer piezoresistive sensors. Sensors and Actuators A: Physical 2021, 319, 112519. doi:10.1016/j.sna.2020.112519
• de, N. F. S.; Ruppert, M. G.; Yong, Y. K.; Fleming, A. J. Integrated force and displacement sensing in active microcantilevers for off-resonance tapping mode atomic force microscopy. In 2020 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), IEEE, 2020; pp 1–6. doi:10.1109/marss49294.2020.9307881
• Moore, S. I.; Ruppert, M. G.; Yong, Y. K. AFM Cantilever Design for Multimode Q Control: Arbitrary Placement of Higher Order Modes. IEEE/ASME Transactions on Mechatronics 2020, 25, 1389–1397. doi:10.1109/tmech.2020.2975627
• Moore, S. I.; Ruppert, M. G.; Yong, Y. K. An optimization framework for the design of piezoelectric AFM cantilevers. Precision Engineering 2019, 60, 130–142. doi:10.1016/j.precisioneng.2019.08.005
• Nan, K.; Wang, H.; Ning, X.; Miller, K. A.; Wei, C.; Liu, Y.; Li, H.; Xue, Y.; Xie, Z.; Luan, H.; Zhang, Y.; Huang, Y.; Rogers, J. A.; Braun, P. V. Soft Three-Dimensional Microscale Vibratory Platforms for Characterization of Nano-Thin Polymer Films. ACS nano 2018, 13, 449–457. doi:10.1021/acsnano.8b06736
• Ruppert, M. G.; Moore, S. I.; Zawierta, M.; Fleming, A. J.; Putrino, G.; Yong, Y. K. Multimodal atomic force microscopy with optimized higher eigenmode sensitivity using on-chip piezoelectric actuation and sensing. Nanotechnology 2018, 30, 085503. doi:10.1088/1361-6528/aae40b
• Moore, S. I.; Ruppert, M. G.; Yong, Y. K. Arbitrary Placement of AFM Cantilever Higher Eigenmodes Using Structural Optimization. In 2018 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS), IEEE, 2018; pp 1–6. doi:10.1109/marss.2018.8481165
• Ruppert, M. G.; Yong, Y. K. AIM - Design of Hybrid Piezoelectric/Piezoresistive Cantilevers for Dynamic-mode Atomic Force Microscopy. In 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), IEEE, 2018; pp 144–149. doi:10.1109/aim.2018.8452229
• Coskun, M. B.; Fowler, A. G.; Maroufi, M.; Moheimani, S. O. R. On-Chip Feedthrough Cancellation Methods for Microfabricated AFM Cantilevers With Integrated Piezoelectric Transducers. Journal of Microelectromechanical Systems 2017, 26, 1287–1297. doi:10.1109/jmems.2017.2731762
• Ruppert, M. G.; Yong, Y. K. Note: Guaranteed collocated multimode control of an atomic force microscope cantilever using on-chip piezoelectric actuation and sensing. The Review of scientific instruments 2017, 88, 086109. doi:10.1063/1.4990451

Explore citations to this article at