Effect of wavelength and liquid on formation of Ag, Au, Ag/Au nanoparticles via picosecond laser ablation and SERS-based detection of DMMP

• Sree Satya Bharati Moram,
• Chandu Byram and
• Venugopal Rao Soma

Beilstein J. Nanotechnol. 2024, 15, 1054–1069, doi:10.3762/bjnano.15.86

• -dispersive X-ray spectroscopy. Furthermore, NPs of various sizes ranging from 6 to 35 nm were loaded onto a filter paper by a simple and effective drop-casting approach to achieve flexible surface-enhanced Raman spectroscopy (SERS) substrates/sensors. These substrates were tested using a simple, portable

• interest in many applications, such as photoelectronic devices, biochemical sensors, and surface-enhanced Raman spectroscopy (SERS) substrates, due to their high purity NPs as well as an easy method for altering the structures, NPs/NSs sizes, and morphology by tuning the laser parameters and surrounding

Nanoarchitectonics of photothermal materials to enhance the sensitivity of lateral flow assays

• Elangovan Sarathkumar,
• Rajasekharan S. Anjana and
• Ramapurath S. Jayasree

Beilstein J. Nanotechnol. 2023, 14, 988–1003, doi:10.3762/bjnano.14.82

• ]. However, even with these modifications, it relied on the colorimetric principle and was not applicable for the quantitative determination of analytes. In recent years, to address these challenges, various signal amplification strategies, such as DNA amplification, nanozyme activity, surface-enhanced Raman

• spectroscopy (SERS), fluorescence, ultrasound, and photothermal methods, have been tried in LFAs [4][13][14]. For example, fluorescence-based LFAs exhibited a 100- to 1000-fold higher sensitivity than conventional LFAs [15]. However, working with fluorescence-based LFAs is complex because of photoinstability

Silver-based SERS substrates fabricated using a 3D printed microfluidic device

• Phommachith Sonexai,
• Minh Van Nguyen,
• Bui The Huy and
• Yong-Ill Lee

Beilstein J. Nanotechnol. 2023, 14, 793–803, doi:10.3762/bjnano.14.65

• detection of harmful chemicals in the environment and for food safety is a crucial requirement. While traditional techniques such as GC–MS and HPLC provide high sensitivity, they are expensive, time-consuming, and require skilled labor. Surface-enhanced Raman spectroscopy (SERS) is a powerful analytical

• the potential to be a valuable analytical tool for monitoring environmental contaminants. Keywords: 3D printing; microfluidic droplet; SERS substrate; silver nanoparticle; smartphone detection; Introduction Surface-enhanced Raman spectroscopy (SERS) has emerged as a powerful optical trace detection

Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review

• Akeem Adeyemi Oladipo,
• Saba Derakhshan Oskouei and
• Mustafa Gazi

Beilstein J. Nanotechnol. 2023, 14, 631–673, doi:10.3762/bjnano.14.52

• (ELISA), radioimmunoassay (RIA), surface-enhanced Raman spectroscopy (SERS), and capillary electrophoresis are common analytical techniques used to qualitatively or quantitatively determine pharmaceuticals in various matrices because they are sensitive (Figure 2), have a significant tolerable limit of

SERS performance of GaN/Ag substrates fabricated by Ag coating of GaN platforms

• Magdalena A. Zając,
• Bogusław Budner,
• Malwina Liszewska,
• Bartosz Bartosewicz,
• Łukasz Gutowski,
• Jan L. Weyher and
• Bartłomiej J. Jankiewicz

Beilstein J. Nanotechnol. 2023, 14, 552–564, doi:10.3762/bjnano.14.46

• substrates using pulsed laser deposition (PLD) and magnetron sputtering (MS) and their evaluation as potential substrates for surface-enhanced Raman spectroscopy (SERS) are reported. Ag layers of comparable thicknesses were deposited using PLD and MS on nanostructured GaN platforms. All fabricated SERS

• : GaN/Ag; magnetron sputtering; nanofabrication; pulsed laser deposition; SERS substrates; surface-enhanced Raman spectroscopy (SERS); Introduction Surface-enhanced Raman spectroscopy (SERS) is a highly sensitive and specific technique with multiplexing capabilities [1][2][3][4]. It is considered for

Characterisation of a micrometer-scale active plasmonic element by means of complementary computational and experimental methods

• Ciarán Barron,
• Giulia Di Fazio,
• Samuel Kenny,
• Silas O’Toole,
• Robin O’Reilly and
• Dominic Zerulla

Beilstein J. Nanotechnol. 2023, 14, 110–122, doi:10.3762/bjnano.14.12

• fundamental physical phenomena at the nano- and mesoscales [9][10][11][12][13][14][15], as well as more practical applications in Raman spectroscopy in the form of surface-enhanced Raman spectroscopy (SERS) [16] and other spectroscopic techniques [17][18]. SPPs also find uses in fields such as ultrasensitive

Revealing local structural properties of an atomically thin MoSe₂ surface using optical microscopy

• Lin Pan,
• Peng Miao,
• Anke Horneber,
• Alfred J. Meixner,
• Pierre-Michel Adam and
• Dai Zhang

Beilstein J. Nanotechnol. 2022, 13, 572–581, doi:10.3762/bjnano.13.49

• molybdenum diselenide (MoSe2) flake as surface-enhanced Raman spectroscopy (SERS) platform, we demonstrate the dependency of the Raman enhancement on laser beam polarization and local structure using copper phthalocyanine (CuPc) as probe. Second harmonic generation (SHG) and photoluminescence spectroscopy

• between structural irregularities and properties of 2D-TMDC materials has been intensively explored recently. Surface-enhanced Raman spectroscopy (SERS) has been used as an ultrasensitive and nondestructive spectroscopic technique for fundamental investigations of light–matter interactions down to the

Modification of a SERS-active Ag surface to promote adsorption of charged analytes: effect of Cu²⁺ ions

• Bahdan V. Ranishenka,
• Andrei Yu. Panarin,
• Irina A. Chelnokova,
• Sergei N. Terekhov,
• Peter Mojzes and
• Vadim V. Shmanai

Beilstein J. Nanotechnol. 2021, 12, 902–912, doi:10.3762/bjnano.12.67

• ; oligonucleotides; porphyrin; silver nanoparticles; substrate modification; surface-enhanced Raman spectroscopy (SERS); Introduction Surface-enhanced Raman scattering (SERS) with its advantages of extreme sensitivity, high selectivity, and non-destructive nature has demonstrated great potential for the quick

On the stability of microwave-fabricated SERS substrates – chemical and morphological considerations

• Limin Wang,
• Aisha Adebola Womiloju,
• Christiane Höppener,
• Ulrich S. Schubert and
• Stephanie Hoeppener

Beilstein J. Nanotechnol. 2021, 12, 541–551, doi:10.3762/bjnano.12.44

• of different organic solvents and buffer solutions. Keywords: chemical stability; microwave synthesis; scanning electron microscopy; silver nanoparticles; surface-enhanced Raman spectroscopy; Introduction Surface-enhanced Raman spectroscopy (SERS) has been developed into a standard analytical tool

• , Philosophenweg 7, 07743 Jena, Germany Leibniz-Institut of Photonic Technology e.V. (IPHT), Albert-Einstein-Straße 9, 07745 Jena, Germany Institute of Physical Chemistry, Friedrich Schiller University Jena, Lessingstr. 10, 07743 Jena, Germany 10.3762/bjnano.12.44 Abstract The stability of surface-enhanced Raman

• spectroscopy (SERS) substrates in different organic solvents and different buffer solutions was investigated. SERS substrates were fabricated by a microwave-assisted synthesis approach and the morphological as well as chemical changes of the SERS substrates were studied. It was demonstrated that the SERS

Fabrication of nano/microstructures for SERS substrates using an electrochemical method

• Jingran Zhang,
• Tianqi Jia,
• Xiaoping Li,
• Junjie Yang,
• Zhengkai Li,
• Guangfeng Shi,
• Xinming Zhang and
• Zuobin Wang

Beilstein J. Nanotechnol. 2020, 11, 1568–1576, doi:10.3762/bjnano.11.139

• /nanopore; nano/microstructures; SERS substrate; Introduction Surface-enhanced Raman spectroscopy (SERS) can be used to detect biomolecules [1][2][3], explosives [4][5][6], and pesticide residues [7][8][9]. Plasmonic metal nanostructures are often used as SERS substrates to increase the molecule-specific

Optically and electrically driven nanoantennas

• Monika Fleischer,
• Dai Zhang and
• Alfred J. Meixner

Beilstein J. Nanotechnol. 2020, 11, 1542–1545, doi:10.3762/bjnano.11.136

• , Germany 10.3762/bjnano.11.136 Keywords: active plasmonics; electrically driven nanoantenna; gap antenna; nanoantenna; nanofabrication; nanospectroscopy; nano-photonics; optical antenna; second harmonic generation; sensing; scanning tip; surface-enhanced infrared absorption (SEIRA); surface-enhanced Raman

• spectroscopy (SERS); tip-enhanced Raman spectroscopy (TERS); tunnel junction; Editorial Optical antennas + serve to confine the energy of photons transported by a light wave to a tiny volume much smaller than the wavelength; or reversely, to convert the energy of an evanescent field that oscillates at optical

A silver-nanoparticle/cellulose-nanofiber composite as a highly effective substrate for surface-enhanced Raman spectroscopy

• Yongxin Lu,
• Yan Luo,
• Zehao Lin and
• Jianguo Huang

Beilstein J. Nanotechnol. 2019, 10, 1270–1279, doi:10.3762/bjnano.10.126

• composed of silver nanoparticles anchored on cellulose nanofibers was fabricated, which is shown to be a highly effective substrate for surface-enhanced Raman spectroscopy (SERS). SERS, a powerful molecular spectroscopy method, is widely used in the trace detection and characterization of various chemical

Revisiting semicontinuous silver films as surface-enhanced Raman spectroscopy substrates

• Malwina Liszewska,
• Bogusław Budner,
• Małgorzata Norek,
• Bartłomiej J. Jankiewicz and
• Piotr Nyga

Beilstein J. Nanotechnol. 2019, 10, 1048–1055, doi:10.3762/bjnano.10.105

• . Sylwestra Kaliskiego Street, 00–908 Warsaw, Poland 10.3762/bjnano.10.105 Abstract Surface-enhanced Raman spectroscopy (SERS) is a very promising analytical technique for the detection and identification of trace amounts of analytes. Among the many substrates used in SERS of great interest are

• nanoscale regions called “hot spots” [3]. These “hot spots” can be utilized in surface-enhanced Raman spectroscopy (SERS) [4], allowing for the detection of trace amounts of chemicals and biological materials, down to the single molecule or cell level [5]. SERS was discovered in the 1970s [6][7][8] and a

Features and advantages of flexible silicon nanowires for SERS applications

• Hrvoje Gebavi,
• Vlatko Gašparić,
• Dubravko Risović,
• Nikola Baran,
• Paweł Henryk Albrycht and
• Mile Ivanda

Beilstein J. Nanotechnol. 2019, 10, 725–734, doi:10.3762/bjnano.10.72

• flexible silicon nanowires (SiNWs) substrates for surface-enhanced Raman spectroscopy (SERS) applications. The novel SERS substrates are described in detail considering three main aspects. First, the key synthesis parameters for the flexible nanostructure SERS substrates were optimized. It is shown that

• -mercaptophenylboronic acid; surface-enhanced Raman spectroscopy (SERS); vapour–liquid–solid; Introduction The mechanism of surface-enhanced Raman spectroscopy (SERS) [1] is predominantly described by electromagnetic theory, which covers most of the observed features [2]. Specially designed nanostructured surfaces

Controlling surface morphology and sensitivity of granular and porous silver films for surface-enhanced Raman scattering, SERS

• Sherif Okeil and
• Jörg J. Schneider

Beilstein J. Nanotechnol. 2018, 9, 2813–2831, doi:10.3762/bjnano.9.263

• Sherif Okeil Jorg J. Schneider Eduard-Zintl-Institut für Anorganische und Physikalische Chemie, Technische Universität Darmstadt, Alarich-Weiss-Straße 12, 64287 Darmstadt, Germany 10.3762/bjnano.9.263 Abstract The design of efficient substrates for surface-enhanced Raman spectroscopy (SERS) for

• treatment; silver; sputtering; surface-enhanced Raman spectroscopy (SERS); surface roughening; Introduction The great enhancement of Raman signals obtained from molecules when they are in close vicinity to a rough noble-metal surface (e.g., gold, silver and copper) has attracted a great deal of interest in

Self-assembled quasi-hexagonal arrays of gold nanoparticles with small gaps for surface-enhanced Raman spectroscopy

• Emre Gürdal,
• Simon Dickreuter,
• Fatima Noureddine,
• Pascal Bieschke,
• Dieter P. Kern and
• Monika Fleischer

Beilstein J. Nanotechnol. 2018, 9, 1977–1985, doi:10.3762/bjnano.9.188

• University of Tübingen, Auf der Morgenstelle 15, 72076 Tübingen, Germany 10.3762/bjnano.9.188 Abstract The fabrication and optical characterization of self-assembled arrangements of rough gold nanoparticles with a high area coverage and narrow gaps for surface-enhanced Raman spectroscopy (SERS) are reported

• enhanced Raman spectroscopy (SERS) [10]. Ordered arrays of such particles can be fabricated by different methods. Electron-beam lithography for example is a top-down method which provides good control, but is time consuming and costly. In contrast, the self-assembly of block-copolymers is a bottom-up

• remarkable optical properties make them attractive for applications in biosensing, biomedical science and as optical antennas [6][7][8]. In particular, metal nanoparticles can be employed to strongly enhance the signal intensity in chemically specific Raman sensing [9]. This technique is known as surface

Optical near-field mapping of plasmonic nanostructures prepared by nanosphere lithography

• Gitanjali Kolhatkar,
• Alexandre Merlen,
• Jiawei Zhang,
• Chahinez Dab,
• Gregory Q. Wallace,
• François Lagugné-Labarthet and
• Andreas Ruediger

Beilstein J. Nanotechnol. 2018, 9, 1536–1543, doi:10.3762/bjnano.9.144

• [23]. The resulting local melting reveals the hot spots, but at the cost of the sample destruction. Other methods use surface enhanced Raman spectroscopy (SERS) [28][29]. In these cases, a Raman active molecule is deposited on the surface of the sample. Its Raman signal is only visible on the hot

Surface characterization of nanoparticles using near-field light scattering

• Eunsoo Yoo,
• Yizhong Liu,
• Chukwuazam A. Nwasike,
• Sebastian R. Freeman,
• Brian C. DiPaolo,
• Bernardo Cordovez and
• Amber L. Doiron

Beilstein J. Nanotechnol. 2018, 9, 1228–1238, doi:10.3762/bjnano.9.114

• force microscopy combined with surface enhanced Raman spectroscopy (SERS) to enable trapping and chemical characterization of individual metallic nanoparticles [38]. Although not done in the present study, a combined approach using our methods and those of Kong et al. may be a powerful tool for dynamic

Refractive index sensing and surface-enhanced Raman spectroscopy using silver–gold layered bimetallic plasmonic crystals

• Somi Kang,
• Sean E. Lehman,
• Matthew V. Schulmerich,
• An-Phong Le,
• Tae-woo Lee,
• Stephen K. Gray,
• Rohit Bhargava and
• Ralph G. Nuzzo

Beilstein J. Nanotechnol. 2017, 8, 2492–2503, doi:10.3762/bjnano.8.249

• /bjnano.8.249 Abstract Herein we describe the fabrication and characterization of Ag and Au bimetallic plasmonic crystals as a system that exhibits improved capabilities for quantitative, bulk refractive index (RI) sensing and surface-enhanced Raman spectroscopy (SERS) as compared to monometallic

• spectra collected in each PEG solution and a spectrum recorded in pure water. These values were integrated to account for wavelength dependence of both negative and positive changes in spectroscopic intensity using Equation 1, a value having units of Δ%T·nm. Surface-enhanced Raman spectroscopy (SERS

Fabrication of gold-coated PDMS surfaces with arrayed triangular micro/nanopyramids for use as SERS substrates

• Jingran Zhang,
• Yongda Yan,
• Peng Miao and
• Jianxiong Cai

Beilstein J. Nanotechnol. 2017, 8, 2271–2282, doi:10.3762/bjnano.8.227

• the structures were successfully transferred to a polydimethylsiloxane (PDMS) surface using a reverse nanoimprinting approach. The structured PDMS surface is coated with a thin Au film, and the final substrate is demonstrated as a surface-enhanced Raman spectroscopy (SERS) substrate. Rhodamine 6G (R6G

• method proposed in this paper is reliable, replicable, homogeneous and low-cost for the fabrication of SERS substrates. Keywords: micro/nanopyramid; nanoimprinting; PDMS substrate; rhodamine 6G; SERS; Introduction Surface enhanced Raman spectroscopy (SERS) is a prominent, highly analytical tool for the

Surface-enhanced Raman spectroscopy of cell lysates mixed with silver nanoparticles for tumor classification

• Mohamed Hassoun,
• Iwan W.Schie,
• Tatiana Tolstik,
• Sarmiza E. Stanca,
• Christoph Krafft and
• Juergen Popp

Beilstein J. Nanotechnol. 2017, 8, 1183–1190, doi:10.3762/bjnano.8.120

• silver nanoparticles. Keywords: cell lysate; silver nanoparticles; surface-enhanced Raman spectroscopy (SERS); tumor-cell differentiation; Introduction Cytopathology is the histopathologic inspection of cells. Dyes, such as hematoxylin for cell nuclei or eosin for cytoplasm, are commonly used to stain

Near-field surface plasmon field enhancement induced by rippled surfaces

• Mario D’Acunto,
• Francesco Fuso,
• Ruggero Micheletto,
• Makoto Naruse,
• Francesco Tantussi and
• Maria Allegrini

Beilstein J. Nanotechnol. 2017, 8, 956–967, doi:10.3762/bjnano.8.97

• of fundamental relevance to study near-field nonlinear optical phenomena [1][2]. Particularly relevant is the strong electric field enhancement on resonance that can be of special interest for various applications, such as surface-enhanced Raman spectroscopy (SERS) [3][4], tip-enhanced Raman

Surface-enhanced Raman scattering of self-assembled thiol monolayers and supported lipid membranes on thin anodic porous alumina

• Marco Salerno,
• Amirreza Shayganpour,
• Barbara Salis and
• Silvia Dante

Beilstein J. Nanotechnol. 2017, 8, 74–81, doi:10.3762/bjnano.8.8

• of the use of tAPA–Au substrates as a platform for the development of surface-enhanced Raman spectroscopy (SERS) biosensors on living cells. In the future, these tAPA–Au-SLB substrates will be investigated also for drug delivery of bioactive agents from the APA pores. Keywords: anodic porous alumina

• metals can be used for plasmonics-based enhanced spectroscopy such as in surface-enhanced Raman spectroscopy (SERS) [11][12][13][14]. In recent years, the thin form of APA (tAPA), resulting from anodization of Al films of less than 1 µm thickness, has been increasingly used because it can be better

Surface-enhanced infrared absorption studies towards a new optical biosensor

• Lothar Leidner,
• Julia Stäb,
• Jennifer T. Adam and
• Günter Gauglitz

Beilstein J. Nanotechnol. 2016, 7, 1736–1742, doi:10.3762/bjnano.7.166

• gained some importance in the field of sensor applications during the last three decades [8][9][10]. The theory of SEIRA is similar to the theory of surface-enhanced Raman spectroscopy (SERS) where electrochemical and chemical mechanisms seem to be responsible for the signal enhancement [11]. The effect

Tunable longitudinal modes in extended silver nanoparticle assemblies

• Serene S. Bayram,
• Klas Lindfors and
• Amy Szuchmacher Blum

Beilstein J. Nanotechnol. 2016, 7, 1219–1228, doi:10.3762/bjnano.7.113

• of modern applications in surface-enhanced Raman spectroscopy (SERS), optical sensing and emission enhancement of molecules residing in the near field [33][34]. In addition to applications in spectroscopy, plasmonic interactions may also be exploited in other light-based devices. The miniaturization