Theoretical investigations of oxygen vacancy effects in nickel-doped zirconia from ab initio XANES spectroscopy at the oxygen K-edge

• Dick Hartmann Douma,
• Lodvert Tchibota Poaty,
• Alessio Lamperti,
• Stéphane Kenmoe,
• Abdulrafiu Tunde Raji,
• Alberto Debernardi and
• Bernard M’Passi-Mabiala

Beilstein J. Nanotechnol. 2022, 13, 975–985, doi:10.3762/bjnano.13.85

• interactions, using single-electron approaches based on density functional theory (DFT) may not be an easy task. In fact, the 2p hole and 3d hole radial wave functions in such systems overlap significantly and may render the reproduction of the experimental spectrum difficult [33]. However, it is possible to

• in S1 and S2 may be responsible for the decrease in the pre-edge peaks with increasing concentration of oxygen vacancies. Conclusion Using the density functional theory approach and X-ray absorption near-edge spectroscopy, we study the electronic structure of zirconia containing two nickel dopant

Modeling a multiple-chain emeraldine gas sensor for NH₃ and NO₂ detection

• Hana Sustkova and
• Jan Voves

Beilstein J. Nanotechnol. 2022, 13, 721–729, doi:10.3762/bjnano.13.64

• molecular properties of polyaniline have been studied by quantum mechanical means in [4][8]. The band structure was calculated by Reis et al. [9], together with transmittance, electrical current flow, and charge density. For these calculations, density functional theory (DFT, [10]) based on the generalized

Impact of device design on the electronic and optoelectronic properties of integrated Ru-terpyridine complexes

• Max Mennicken,
• Sophia Katharina Peter,
• Corinna Kaulen,
• Ulrich Simon and
• Silvia Karthäuser

Beilstein J. Nanotechnol. 2022, 13, 219–229, doi:10.3762/bjnano.13.16

• was verified by infrared reflection absorption spectroscopy (IRRAS) and surface-enhanced Raman spectroscopy in combination with density functional theory calculations, as well as variable angle spectroscopic ellipsometry. Based on this wire formation protocol the on-chip preparation of Ru(TP)2-complex

Theoretical understanding of electronic and mechanical properties of 1T′ transition metal dichalcogenide crystals

• Seyedeh Alieh Kazemi,
• Sadegh Imani Yengejeh,
• Vei Wang,
• William Wen and
• Yun Wang

Beilstein J. Nanotechnol. 2022, 13, 160–171, doi:10.3762/bjnano.13.11

• examined by means of density functional theory (DFT) calculations. Our results reveal that the properties of 1T′ TMDs are mainly affected by their anions. The disulfides are stiffer and more rigid, diselenides are more brittle. In addition, the 1T′ polytype is softer than 2H TMDs. Comparison with the

• ′ polytype; anisotropy; density functional theory; layered transition metal dichalcogenide crystals; shear modulus; Young’s modulus; Introduction Layered transition metal dichalcogenides (TMDs) have received increasing attention as important and versatile materials for new applications in different sectors

• 1T′ structural polytype are systematically investigated by means of first-principles density functional theory (DFT) calculations. Our results demonstrate that the anisotropic mechanical properties of 1T′ TMD materials are greatly affected by their anions. They also show different properties in

Tin dioxide nanomaterial-based photocatalysts for nitrogen oxide oxidation: a review

• Viet Van Pham,
• Hong-Huy Tran,
• Thao Kim Truong and
• Thi Minh Cao

Beilstein J. Nanotechnol. 2022, 13, 96–113, doi:10.3762/bjnano.13.7

• density functional theory (DFT) calculations, trapping experiments, and electron spin resonance measurements (Figure 10). Thus, the impact of intrinsic OVs within SnO2 NPs and the resulting S-scheme heterojunction on the band structure, charge transfer, and photocatalytic activity was presented. The

• , Z. “Adsorption and oxidation of NO on various SnO2(110) surfaces: A density functional theory study”, pages 717–722, Copyright (2015), with permission from Elsevier. This content is not subject to CC BY 4.0. SEM images of SnO2 microspheres synthesized by a hydrothermal method at 180 °C for 24 h

First-principles study of the structural, optoelectronic and thermophysical properties of the π-SnSe for thermoelectric applications

• Muhammad Atif Sattar,
• Najwa Al Bouzieh,
• Maamar Benkraouda and
• Noureddine Amrane

Beilstein J. Nanotechnol. 2021, 12, 1101–1114, doi:10.3762/bjnano.12.82

• make SnSe of great practical importance for the next generation of thermoelectric devices. Here, we report structural, optoelectronic, thermodynamic, and thermoelectric properties of the recently experimentally identified binary phase of tin monoselenide (π-SnSe) by using the density functional theory

• is exceptionally promising for the next generation of photovoltaic and thermoelectric devices at room and high temperatures. Keywords: density functional theory (DFT); electronic properties; lattice thermal conductivity; optical properties; thermodynamic properties; thermoelectric properties; tin

• transmission electron microscopy. As SnS and SnSe share a lot in common, both chemically and structurally, an experimental study verified that the π-SnS prototype exists in the form of π-SnSe. The phase stability of π-SnSe is also confirmed by Golan et al. [47]. By using density functional theory (DFT

Revealing the formation mechanism and band gap tuning of Sb₂S₃ nanoparticles

• Maximilian Joschko,
• Franck Yvan Fotue Wafo,
• Christina Malsi,
• Danilo Kisić,
• Ivana Validžić and
• Christina Graf

Beilstein J. Nanotechnol. 2021, 12, 1021–1033, doi:10.3762/bjnano.12.76

• direct one in the present work. In contrast, Validžić et al. performed calculations based on the density functional theory and found a direct band gap [31]. The optical data can be seen in Figure 9 and in Figure S9 in Supporting Information File 1. As the spectra of the 2 h, 5 h, and 8 h samples are

Molecular assemblies on surfaces: towards physical and electronic decoupling of organic molecules

• Sabine Maier and
• Meike Stöhr

Beilstein J. Nanotechnol. 2021, 12, 950–956, doi:10.3762/bjnano.12.71

• partial exploration of the potential energy landscape due to the complexity of the system. Recently developed structure search methods that combine machine learning with density functional theory provide the possibility of reliable structure identification of non-planar molecules, as demonstrated for the

The role of convolutional neural networks in scanning probe microscopy: a review

• Ido Azuri,
• Irit Rosenhek-Goldian,
• Neta Regev-Rudzki,
• Georg Fantner and
• Sidney R. Cohen

Beilstein J. Nanotechnol. 2021, 12, 878–901, doi:10.3762/bjnano.12.66

• images were compared with those computed by density functional theory (DFT) based on well-known single and dimer Si defects. The examples given here demonstrate the utility of deep learning in general and CNN in particular in the field of microscopy. In the following section, the emphasis is narrowed

Prediction of Co and Ru nanocluster morphology on 2D MoS₂ from interaction energies

• Cara-Lena Nies and
• Michael Nolan

Beilstein J. Nanotechnol. 2021, 12, 704–724, doi:10.3762/bjnano.12.56

• gap in understanding thin film nucleation on 2D materials. In this paper, we present a density functional theory (DFT) study of the adsorption of small Co and Ru structures, with up to four atoms, on a monolayer of MoS2. We explore how the metal–substrate and metal–metal interactions contribute to the

• preferred. Predictions made using these descriptors can be used when deciding which metal–substrate combination will be suitable for a particular application where the shape of the metal is vital. Methods All calculations for this study were carried out with density functional theory (DFT) using the Vienna

A review of defect engineering, ion implantation, and nanofabrication using the helium ion microscope

• Frances I. Allen

Beilstein J. Nanotechnol. 2021, 12, 633–664, doi:10.3762/bjnano.12.52

• ]. In addition, density functional theory has been used to model the effect of ion-induced defects on the electronic band structure of various 2D transition metal dichalcogenides [26][30][36], and band-excitation Kelvin probe microscopy has been used to probe the resulting changes in the local work

Boosting of photocatalytic hydrogen evolution via chlorine doping of polymeric carbon nitride

• Malgorzata Aleksandrzak,
• Michalina Kijaczko,
• Wojciech Kukulka,
• Daria Baranowska,
• Martyna Baca,
• Beata Zielinska and
• Ewa Mijowska

Beilstein J. Nanotechnol. 2021, 12, 473–484, doi:10.3762/bjnano.12.38

• of chlorine-doped polymeric carbon nitride. (a) Adsorption–desorption isotherms and (b) density functional theory (DFT) applied to the adsorption isotherms to obtain pore–size distributions of PCN and Cl-PCN. H2 evolution rate catalyzed by PCN and Cl-PCN. (a) DRS spectra, (b) PL emission spectra, (c

Reconstruction of a 2D layer of KBr on Ir(111) and electromechanical alteration by graphene

• Zhao Liu,
• Antoine Hinaut,
• Stefan Peeters,
• Sebastian Scherb,
• Ernst Meyer,
• Maria Clelia Righi and
• Thilo Glatzel

Beilstein J. Nanotechnol. 2021, 12, 432–439, doi:10.3762/bjnano.12.35

• reconstruction of a two-dimensional layer of KBr on an Ir(111) surface is observed by high-resolution noncontact atomic force microscopy and verified by density functional theory (DFT). The observed KBr structure is oriented along the main directions of the Ir(111) surface, but forms a characteristic double-line

• temperature and density functional theory (DFT) calculations. The results suggest that this particular reconstruction of KBr occurs on Ir(111), due to a specific correlation of the lattice parameter. When deposited on a single layer of graphene on the same substrate, the topography of the KBr islands returns

• answer, density functional theory (DFT) calculations have been performed to conclude on the observed structure. As a fundamental consideration, the lattice match for the orientation of KBr to fit the direction of Ir(111) due to was used and several possible periodicities have been considered as

TiO_x/Pt₃Ti(111) surface-directed formation of electronically responsive supramolecular assemblies of tungsten oxide clusters

• Marco Moors,
• Yun An,
• Agnieszka Kuc and
• Kirill Yu. Monakhov

Beilstein J. Nanotechnol. 2021, 12, 203–212, doi:10.3762/bjnano.12.16

• supramolecular structures. It is noteworthy that individual W3O9 clusters, according to previous density functional theory (DFT) calculations [11], are characterized by the most stable six-membered ring structure with D3h symmetry. It consists of oxygen-bridged tungsten atoms with two additional terminal oxygen

• calculated values based on the used deposition rate. Tests with a varied deposition rate showed no significant impact on the cluster adsorption behavior. Density functional theory simulations The simulations of W3O9 and W3O8 clusters were performed using the AMS suite [31]. The geometry optimization and

ZnO and MXenes as electrode materials for supercapacitor devices

• Ameen Uddin Ammar,
• Ipek Deniz Yildirim,
• Feray Bakan and
• Emre Erdem

Beilstein J. Nanotechnol. 2021, 12, 49–57, doi:10.3762/bjnano.12.4

• deconvoluted into several peaks and each maximum of these peaks is assigned to one type of emission. Sometimes the emission energies are matched with defect formation energies calculated using first-principle density functional theory. This approach has many problematic issues. First, of all, synthesis routes

Molecular dynamics modeling of the influence forming process parameters on the structure and morphology of a superconducting spin valve

• Alexander Vakhrushev,
• Aleksey Fedotov,
• Vladimir Boian,
• Roman Morari and
• Anatolie Sidorenko

Beilstein J. Nanotechnol. 2020, 11, 1776–1788, doi:10.3762/bjnano.11.160

• the nanosystem. There are many possible choices for the type of potential, but recently, due to its accuracy and adequacy, many-particle force fields have gained great popularity. In this work, we used the potential of the modified embedded-atom method (MEAM) which is based on density functional

• theory (DFT). In this method, the resulting potential of the nanosystem is represented as the sum of the energy contributions of the individual atoms, and the contributions of pair and multielement interactions are considered separately. Thus, where Ui(r) is the potential of an individual atom, affecting

PTCDA adsorption on CaF₂ thin films

• Philipp Rahe

Beilstein J. Nanotechnol. 2020, 11, 1615–1622, doi:10.3762/bjnano.11.144

• (111) surface with deposition on thicker CaF2/CaF1/Si(111) films. The identification of mostly single molecules on the CaF1/Si(111) interface layer is explained by the presence of atomic-size defects within this layer. Geometry-optimisation calculations using density functional theory reveal a geometry

• theoretically modelled using density functional theory (DFT). A prominent difference of the molecular properties on the different surface areas is the presence of mostly single molecules in CaF1/Si(111) regions, while ultrasmall molecular assemblies are experimentally observed on thicker CaF2 films. A rather

• -tracking system [30]. Image data were acquired in constant-current or constant-height mode while applying a sample bias Ub. Gwyddion [31] was used for the image data analysis. Density functional theory calculations were performed using cp2k (http://www.cp2k.org) [32] and parameters similar to previous

Detecting stable adsorbates of (1S)-camphor on Cu(111) with Bayesian optimization

• Jari Järvi,
• Patrick Rinke and
• Milica Todorović

Beilstein J. Nanotechnol. 2020, 11, 1577–1589, doi:10.3762/bjnano.11.140

• Bayesian Optimization Structure Search (BOSS) method as an efficient solution for identifying the structure of non-planar adsorbates. We apply BOSS with density-functional theory simulations to detect the stable adsorbate structures of (1S)-camphor on the Cu(111) surface. We identify the optimal structure

• properties, and ultimately allow us to tune the functionality of advanced materials. Keywords: Bayesian optimization; camphor; Cu(111); density-functional theory; electronic structure; organic surface adsorbates; physical chemistry; structure search; surface science; Introduction Current frontier

• fast to compute, but they cannot accurately model hybrid materials, in which atomic interactions often feature a mixture of covalent and dispersive bonding, with charge transfer and polarization effects. Instead, we must employ quantum mechanical methods, such as density-functional theory (DFT) [12][13

Adsorption and self-assembly of porphyrins on ultrathin CoO films on Ir(100)

• Feifei Xiang,
• Tobias Schmitt,
• Marco Raschmann and
• M. Alexander Schneider

Beilstein J. Nanotechnol. 2020, 11, 1516–1524, doi:10.3762/bjnano.11.134

• films on Ir(100) by scanning tunneling microscopy (STM) and density functional theory (DFT). The two substrates differ greatly with respect to their structural and potential-energy landscape corrugation with immediate consequences for adsorption and self-assembly of the molecules studied. On both films

Controlling the electronic and physical coupling on dielectric thin films

• Philipp Hurdax,
• Michael Hollerer,
• Larissa Egger,
• Georg Koller,
• Xiaosheng Yang,
• Anja Haags,
• Serguei Soubatch,
• Frank Stefan Tautz,
• Mathias Richter,
• Alexander Gottwald,
• Peter Puschnig,
• Martin Sterrer and
• Michael G. Ramsey

Beilstein J. Nanotechnol. 2020, 11, 1492–1503, doi:10.3762/bjnano.11.132

• ]. It should be noted that the occupation of the LUMO is predicted to reduce the torsional angle in the molecule, given that it has a bonding character with respect to the phenyl rings (see Figure 3c) [33]. However, this is not a sufficient condition for planarization. Density functional theory (DFT

• angle of 40°. The experimental maps (top left of a and b) are shown in comparison to the maps calculated from the density functional theory orbitals (c) for two orthogonally oriented planar 6P molecules of the LUMO (bottom right of a) and the HOMO (bottom right of b). The geometry for the maximum LUMO

Self-assembly and spectroscopic fingerprints of photoactive pyrenyl tectons on hBN/Cu(111)

• Domenik M. Zimmermann,
• Knud Seufert,
• Luka Ðorđević,
• Tobias Hoh,
• Sushobhan Joshi,
• Tomas Marangoni,
• Davide Bonifazi and
• Willi Auwärter

Beilstein J. Nanotechnol. 2020, 11, 1470–1483, doi:10.3762/bjnano.11.130

• characterizing a family of pyridin-4-ylethynyl-functionalized pyrene derivatives in different environments. UV–vis measurements in toluene solutions revealed absorption at wavelengths consistent with density functional theory (DFT) calculations, while emission experiments showed a high fluorescence quantum yield

Protruding hydrogen atoms as markers for the molecular orientation of a metallocene

• Linda Laflör,
• Michael Reichling and
• Philipp Rahe

Beilstein J. Nanotechnol. 2020, 11, 1432–1438, doi:10.3762/bjnano.11.127

• ), Cu(110), and Cu3N/Cu(110) surfaces [20] as well as on the insulator surfaces calcite(104) [21] and CaF2(111) [22]. An eclipsed ferrocene conformation was found to be predominant on the metallic surfaces [20] and on calcite(104) [21]. On CaF2(111) surfaces, density functional theory (DFT) calculations

Atomic defect classification of the H–Si(100) surface through multi-mode scanning probe microscopy

• Jeremiah Croshaw,
• Thomas Dienel,
• Taleana Huff and
• Robert Wolkow

Beilstein J. Nanotechnol. 2020, 11, 1346–1360, doi:10.3762/bjnano.11.119

• will foster further investigation with more robust theoretical frameworks such as by density functional theory. Results and Discussion SPM imaging modes The variability observed in differing scanning probe imaging modes originates from the applied feedback mode, different tunnelling parameters, or the

Structural and electronic properties of SnO₂ doped with non-metal elements

• Jianyuan Yu,
• Yingeng Wang,
• Yan Huang,
• Xiuwen Wang,
• Jing Guo,
• Jingkai Yang and
• Hongli Zhao

Beilstein J. Nanotechnol. 2020, 11, 1321–1328, doi:10.3762/bjnano.11.116

• reflectivity in the infrared region, and the reflectance of the crystals doped with N, C, S, and B decreased sequentially. Based on this theoretical calculations, F-doped SnO2 is found to be the best photoelectric material for preparing low-emissivity coatings. Keywords: density functional theory (DFT); doped

• dope SnO2. The calculations were carried out with the CASTEP software. In this paper, density functional theory (DFT) is used to analyze electronic structure and optical properties of SnO2 doped with non-metal elements. Crystal Structure Model and Calculation Method The SnO2 crystal has a tetragonal

• functional theory, crystal structure, electronic structure, and optical properties of SnO2 doped with non-metal elements were theoretically analyzed. The calculation results confirm that the doping caused the crystal lattice to expand. The F-doped SnO2 lattice has the lowest binding energy and is prone to

Straightforward synthesis of gold nanoparticles by adding water to an engineered small dendrimer

• Sébastien Gottis,
• Régis Laurent,
• Vincent Collière and
• Anne-Marie Caminade

Beilstein J. Nanotechnol. 2020, 11, 1110–1118, doi:10.3762/bjnano.11.95

• chemical signal. In addition, it has been shown that the 2JPP coupling constant values decrease when the electron-withdrawing power of the substituents decreases [55]. The density functional theory (DFT) calculations on free and Au-complexed P=N–P=S linkages have shown that a charge is transferred from the