Anodization-based process for the fabrication of all niobium nitride Josephson junction structures

• Massimiliano Lucci,
• Ivano Ottaviani,
• Matteo Cirillo,
• Fabio De Matteis,
• Roberto Francini,
• Vittorio Merlo and
• Ivan Davoli

Beilstein J. Nanotechnol. 2017, 8, 539–546, doi:10.3762/bjnano.8.58

• using a mixture of argon and nitrogen. The process parameters were optimized by monitoring the plasma with an optical spectroscopy technique. This technique allowed us to obtain NbN as well as good quality AlN films and both were used to obtain NbN/AlN/NbN trilayers. Lift-off lithography and selective

• presented in another publication [14]. In the present paper our effort toward the realization of high-quality all-NbN tunnel junctions continues. We have first set up the conditions for a highly reproducible and controllable growth of good-quality NbN monitoring the sputtering plasma by optical spectroscopy

• and tune, in a timely fashion, the chemical composition of the plasma in a sputtering process has been applied to grow thin films of niobium nitride and aluminium nitride. The advantage of this optical spectroscopy technique is that the control of the chemical composition of the film is no longer

Study of the surface properties of ZnO nanocolumns used for thin-film solar cells

• Neda Neykova,
• Jiri Stuchlik,
• Karel Hruska,
• Ales Poruba,
• Zdenek Remes and
• Ognen Pop-Georgievski

Beilstein J. Nanotechnol. 2017, 8, 446–451, doi:10.3762/bjnano.8.48

• development of thin film solar cells based on ZnO NCs. Keywords: 3-dimensional solar cells; hydrothermal growth; optical spectroscopy; photothermal deflection spectroscopy; plasma treatment; X-ray photoelectron spectroscopy; ZnO nanocolumns; Introduction The widely accepted design of thin-film silicon (TF

Optical absorption signature of a self-assembled dye monolayer on graphene

• Tessnim Sghaier,
• Sylvain Le Liepvre,
• Céline Fiorini,
• Ludovic Douillard and
• Fabrice Charra

Beilstein J. Nanotechnol. 2016, 7, 862–868, doi:10.3762/bjnano.7.78

• strengths of the vibronic structures are preserved. These changes are attributed to non-resonant interactions with the graphene layer and the neighbouring molecules. Keywords: absorption spectroscopy; dye aggregates; graphene; molecular monolayer; optical spectroscopy; perylene-3,4,9,10-tetracarboxylic

Au nanoparticle-based sensor for apomorphine detection in plasma

• Chiara Zanchi,
• Andrea Lucotti,
• Matteo Tommasini,
• Sebastiano Trusso,
• Ugo de Grazia,
• Emilio Ciusani and
• Paolo M. Ossi

Beilstein J. Nanotechnol. 2015, 6, 2224–2232, doi:10.3762/bjnano.6.228

• concentration analytes in biomedical scenarios [18]. The interest in the use of plasmonics for enhancing optical spectroscopy techniques is certainly growing in the scientific community. This is testified by the recent birth of a series of international conferences on enhanced spectroscopy techniques [19][20

A single-source precursor route to anisotropic halogen-doped zinc oxide particles as a promising candidate for new transparent conducting oxide materials

• Daniela Lehr,
• Markus R. Wagner,
• Johanna Flock,
• Julian S. Reparaz,
• Clivia M. Sotomayor Torres,
• Alexander Klaiber,
• Thomas Dekorsy and
• Sebastian Polarz

Beilstein J. Nanotechnol. 2015, 6, 2161–2172, doi:10.3762/bjnano.6.222

• −xClx samples were analyzed by PXRD and the results are shown in Figure S6 (Supporting Information File 1). It can be seen that with higher content of chlorine (under otherwise constant conditions) also the particle size increases. Optical spectroscopy is typically a good tool to gather first

Superluminescence from an optically pumped molecular tunneling junction by injection of plasmon induced hot electrons

• Kai Braun,
• Xiao Wang,
• Andreas M. Kern,
• Hilmar Adler,
• Heiko Peisert,
• Thomas Chassé,
• Dai Zhang and
• Alfred J. Meixner

Beilstein J. Nanotechnol. 2015, 6, 1100–1106, doi:10.3762/bjnano.6.111

• was observed [10]. The efficiency of photoemission is quite low, typically with a quantum efficiency (QE) per tunneling electron of the order of 10−6 to 10−5 emitted photons [2]. A different approach for ultra-high resolution optical spectroscopy has emerged recently, the so-called tip-enhanced Raman

Electrical properties of single CdTe nanowires

• Elena Matei,
• Camelia Florica,
• Andreea Costas,
• María Eugenia Toimil-Molares and
• Ionut Enculescu

Beilstein J. Nanotechnol. 2015, 6, 444–450, doi:10.3762/bjnano.6.45

• oxide precipitation. After nanowire growth, the membrane was dissolved with chloroform leaving the nanowires exposed. The arrays of nanowires fabricated in this manner were investigated by means of scanning electron microscopy, energy dispersive X-ray analysis and optical spectroscopy. Further, the

Materials and characterization techniques for high-temperature polymer electrolyte membrane fuel cells

• Roswitha Zeis

Beilstein J. Nanotechnol. 2015, 6, 68–83, doi:10.3762/bjnano.6.8

• . MEAs built from binderless electrodes demonstrated a stable cell performance over 900 h of operation [53]. Characterisation techniques for HT-PEMFCs Optical spectroscopy Raman and infrared spectroscopy – Acid-doping process of PBI membranes: Raman and infrared (IR) spectroscopy are powerful tools to

Exploring plasmonic coupling in hole-cap arrays

• Thomas M. Schmidt,
• Maj Frederiksen,
• Vladimir Bochenkov and
• Duncan S. Sutherland

Beilstein J. Nanotechnol. 2015, 6, 1–10, doi:10.3762/bjnano.6.1

• compared to separated arrays of holes or caps. Optical spectroscopy and FDTD simulations reveal strong coupling between the gold caps and both Bloch Wave-surface plasmon polariton (BW-SPP) modes and localized surface plasmon resonance (LSPR)-type resonances in hole arrays when they are in close proximity

Inorganic Janus particles for biomedical applications

• Isabel Schick,
• Steffen Lorenz,
• Dominik Gehrig,
• Stefan Tenzer,
• Wiebke Storck,
• Karl Fischer,
• Dennis Strand,
• Frédéric Laquai and
• Wolfgang Tremel

Beilstein J. Nanotechnol. 2014, 5, 2346–2362, doi:10.3762/bjnano.5.244

• monitored by optical spectroscopy [56][73]. The synthetic route can easily be applied to other material compositions as previously demonstrated by the formation of heterostructures composed out of gold and manganese oxide [39]. Au@MnO heterodimers were prepared using preformed Au nanoparticles as seeds, as

Characterization of 10,12-pentacosadiynoic acid Langmuir–Blodgett monolayers and their use in metal–insulator–metal tunnel devices

• Saumya Sharma,
• Mohamad Khawaja,
• Manoj K. Ram,
• D. Yogi Goswami and
• Elias Stefanakos

Beilstein J. Nanotechnol. 2014, 5, 2240–2247, doi:10.3762/bjnano.5.233

• , indium tin oxide (ITO) glass, quartz and nickel substrates for optical spectroscopy, cyclic voltammetry and electrical measurements [12][13][14][15]. The optical and electrochemical properties of the films were investigated using FTIR and cyclic voltammetric studies, respectively. The electrochemical

Probing the plasmonic near-field by one- and two-photon excited surface enhanced Raman scattering

• Katrin Kneipp and
• Harald Kneipp

Beilstein J. Nanotechnol. 2013, 4, 834–842, doi:10.3762/bjnano.4.94

• particularly also for optical spectroscopy. Surface enhanced Raman signatures of single molecules can provide us with important information about the optical near-field. We discuss one- and two-photon excited surface enhanced Raman scattering at the level of single molecules as a tool for probing the plasmonic

• such plasmonic structures [1][2]. Exploiting these optical near-fields opens up exciting new capabilities for photon-driven processes and particularly for optical spectroscopy. Surface-enhanced Raman scattering (SERS) might be one of the most prominent effects to demonstrate the potential of

k-space imaging of the eigenmodes of sharp gold tapers for scanning near-field optical microscopy

• Martin Esmann,
• Simon F. Becker,
• Bernard B. da Cunha,
• Jens H. Brauer,
• Ralf Vogelgesang,
• Petra Groß and
• Christoph Lienau

Beilstein J. Nanotechnol. 2013, 4, 603–610, doi:10.3762/bjnano.4.67

• nanofocusing into the lowest order mode. This minimizes background from higher order modes and thus provides a major advancement towards background-free scanning near-field optical spectroscopy. Since we are able to further separate the near-field contributions by k-space filtering, we can now apply this

Plasmonic oligomers in cylindrical vector light beams

• Mario Hentschel,
• Jens Dorfmüller,
• Harald Giessen,
• Sebastian Jäger,
• Andreas M. Kern,
• Kai Braun,
• Dai Zhang and
• Alfred J. Meixner

Beilstein J. Nanotechnol. 2013, 4, 57–65, doi:10.3762/bjnano.4.6

• characterized by linear optical spectroscopy. The well characterized and designed structures are afterwards studied in depth by exciting them with radial and azimuthally polarized light and simultaneously measuring their plasmonic near-field behavior. Additionally, we attempt to model and simulate our results

Towards a scalable and accurate quantum approach for describing vibrations of molecule–metal interfaces

• David M. Benoit,
• Bruno Madebene,
• Inga Ulusoy,
• Luis Mancera,
• Yohann Scribano and
• Sergey Chulkov

Beilstein J. Nanotechnol. 2011, 2, 427–447, doi:10.3762/bjnano.2.48