Template-controlled piezoactivity of ZnO thin films grown via a bioinspired approach

• Nina J. Blumenstein,
• Fabian Streb,
• Stefan Walheim,
• Thomas Schimmel,
• Zaklina Burghard and
• Joachim Bill

Beilstein J. Nanotechnol. 2017, 8, 296–303, doi:10.3762/bjnano.8.32

• -assembled monolayer and a sulfonate-terminated polyelectrolyte multilayer) on the deposition and therefore on the piezoelectric performance was investigated. While the low negative charge of the COOH-SAM is not able to support oriented attachment of the particles, the strongly negatively charged sulfonated

• of functional inorganic materials under mild reaction conditions where organic templates direct the deposition process. In this study, this principle was adapted for the formation of piezoelectric ZnO thin films. The influence of two different organic templates (namely, a carboxylate-terminated self

Role of solvents in the electronic transport properties of single-molecule junctions

• Katharina Luka-Guth,
• Sebastian Hambsch,
• Andreas Bloch,
• Philipp Ehrenreich,
• Bernd Michael Briechle,
• Filip Kilibarda,
• Torsten Sendler,
• Dmytro Sysoiev,
• Thomas Huhn,
• Artur Erbe and
• Elke Scheer

Beilstein J. Nanotechnol. 2016, 7, 1055–1067, doi:10.3762/bjnano.7.99

• ) is widely used for describing the transport through metal/self-assembled monolayer/metal junctions [31] or also applied to single-molecule contacts [32]. However, the quantitative agreement over a larger bias range is often not satisfactory although phenomenological parameters are introduced to

Large-scale fabrication of achiral plasmonic metamaterials with giant chiroptical response

• Morten Slyngborg,
• Yao-Chung Tsao and
• Peter Fojan

Beilstein J. Nanotechnol. 2016, 7, 914–925, doi:10.3762/bjnano.7.83

• study electron transfer in cyclic voltammetry [45]. Cysteamine is the simplest stable aminothiol, hence it readily adsorbs onto gold surfaces and forms a self-assembled monolayer which is often used as the first layer in the functionalization of surfaces [46]. In all experiments the ECM fabricated with

Optical absorption signature of a self-assembled dye monolayer on graphene

• Tessnim Sghaier,
• Sylvain Le Liepvre,
• Céline Fiorini,
• Ludovic Douillard and
• Fabrice Charra

Beilstein J. Nanotechnol. 2016, 7, 862–868, doi:10.3762/bjnano.7.78

• , we chose an alkylated form of this dye, N,N′-ditridecylperylene-3,4,9,10-tetracarboxylic diimide (PTCDI-C13), in order to take advantage of the interactions between n-alkyl chains and graphitic substrates for forming a spontaneously self-assembled monolayer at the interface between the solution and

• a finite number of lattice orientations, indicating an epitaxial relationship with the graphitic lattice. These results are fully consistent with the expected formation of a self-assembled monolayer in which the molecules are lying flat on the substrate, with adsorbed n-alkyl chains aligned on the C

• chemical calculations have shown that the transition dipole moment corresponding to the π–π* transition is aligned along the N–N′-axis [33]. The difference transmission spectra between self-assembled monolayer on a substrate of monolayer CVD graphene transferred onto fused quartz are shown in Figure 3. Two

Magnetic switching of nanoscale antidot lattices

• Ulf Wiedwald,
• Joachim Gräfe,
• Kristof M. Lebecki,
• Maxim Skripnik,
• Felix Haering,
• Gisela Schütz,
• Paul Ziemann,
• Eberhard Goering and
• Ulrich Nowak

Beilstein J. Nanotechnol. 2016, 7, 733–750, doi:10.3762/bjnano.7.65

• nanosphere lithography, the quality of self-assembled antidot arrays is primarily determined by the size distribution of the particles, and the long-range order of their self-assembled monolayer. While top-down techniques like e-beam lithography usually require a multi-step, laborious preparation process

• , nanosphere lithography offers the preparation of a self-assembled monolayer on the time scale of minutes even on a centimetre length scale. In this work, polystyrene(PS)-based nanosphere lithography was chosen, since monodisperse PS nanosphere suspensions are nowadays commercially available with a wide range

Investigating organic multilayers by spectroscopic ellipsometry: specific and non-specific interactions of polyhistidine with NTA self-assembled monolayers

• Ilaria Solano,
• Pietro Parisse,
• Ornella Cavalleri,
• Federico Gramazio,
• Loredana Casalis and
• Maurizio Canepa

Beilstein J. Nanotechnol. 2016, 7, 544–553, doi:10.3762/bjnano.7.48

• , non-invasive monitoring of molecule adsorption/desorption at surfaces. Results: This paper describes a SE study about the interaction of hexahistidine (His6) on gold substrates functionalized with a thiolate self-assembled monolayer bearing the NTA end group. By systematically applying the difference

Rigid multipodal platforms for metal surfaces

• Michal Valášek,
• Marcin Lindner and
• Marcel Mayor

Beilstein J. Nanotechnol. 2016, 7, 374–405, doi:10.3762/bjnano.7.34

• tripods. The surface-induced chirality in a self-assembled monolayer of 17 was confirmed by STM measurements and both possible mirror configurations were observed. It turned out, that the surface chirality is strongly dependent on the surface coverage of the substrate. The formation of the racemic mixture

• diodes (OLEDs) where the gold surface of the anode was coated with a self-assembled monolayer. In contrast to the bare gold device, the device consisting of the gold electrode coated with tripodal oligothiophene monolayers exhibited a remarkably improved electroluminescence performance, which lead to a

Mismatch detection in DNA monolayers by atomic force microscopy and electrochemical impedance spectroscopy

• Maryse D. Nkoua Ngavouka,
• Pietro Capaldo,
• Elena Ambrosetti,
• Giacinto Scoles,
• Loredana Casalis and
• Pietro Parisse

Beilstein J. Nanotechnol. 2016, 7, 220–227, doi:10.3762/bjnano.7.20

• schematic representation of the AFM-based assay. We immobilize by means of nanografting on a gold surface two ssDNA sequences, differing by one base (reported as a red mark), and carefully measure the height of the DNA nanostructures with respect to the surrounding biorepellent self-assembled monolayer

• representation of the electrode/electrolyte interface. The first layer in contact with the gold electrode is the ssDNA self-assembled monolayer, modelled as a capacitance CssDNA. Then we have the ions present in solution that arrange in response to the gold and DNA charges forming the so-called double layer

3D solid supported inter-polyelectrolyte complexes obtained by the alternate deposition of poly(diallyldimethylammonium chloride) and poly(sodium 4-styrenesulfonate)

• Eduardo Guzmán,
• Armando Maestro,
• Sara Llamas,
• Jesús Álvarez-Rodríguez,
• Francisco Ortega,
• Ángel Maroto-Valiente and
• Ramón G. Rubio

Beilstein J. Nanotechnol. 2016, 7, 197–208, doi:10.3762/bjnano.7.18

• -cut quartz crystals were cleaned with piranha solution (70% H2SO4/30% H2O2) over a period of thirty minutes and then thoroughly rinsed with pure water. The characteristic frequency of the quartz crystal in vacuum was f0 ≈ 5 MHz. A self-assembled monolayer of sodium 3-mercapto-1-propanesulfonate was

Self-organization of gold nanoparticles on silanated surfaces

• Htet H. Kyaw,
• Salim H. Al-Harthi,
• Azzouz Sellai and
• Joydeep Dutta

Beilstein J. Nanotechnol. 2015, 6, 2345–2353, doi:10.3762/bjnano.6.242

• are fundamentally important and also can be applied for designing and modelling of surface plasmon resonance based sensor applications. Keywords: 3-aminopropyletriethoxysilane; electrostatic interaction; functionalization; gold nanoparticles; self-assembled monolayer; self-organization; Introduction

• ]. A considerable amount of work has focused on the immobilization of AuNPs on amine-terminated self-assembled monolayer on different substrates [21][22][23]. In this study, colloidal self-organization of AuNPs was achieved through electrostatic interactions between AuNPs and the functionalized surface

Orthogonal chemical functionalization of patterned gold on silica surfaces

• Francisco Palazon,
• Didier Léonard,
• Thierry Le Mogne,
• Francesca Zuttion,
• Céline Chevalier,
• Magali Phaner-Goutorbe,
• Éliane Souteyrand,
• Yann Chevolot and
• Jean-Pierre Cloarec

Beilstein J. Nanotechnol. 2015, 6, 2272–2277, doi:10.3762/bjnano.6.233

• biosensors) is a major challenge. Keywords: characterization; self-assembled monolayer; surface functionalization; ToF–SIMS; XPS; Introduction The orthogonal self-assembly of different molecules onto a patterned substrate was first demonstrated in 1989 by Whitesides and co-workers [1]. Recently, especially

Optimized design of a nanostructured SPCE-based multipurpose biosensing platform formed by ferrocene-tethered electrochemically-deposited cauliflower-shaped gold nanoparticles

• Wicem Argoubi,
• Maroua Saadaoui,
• Sami Ben Aoun and
• Noureddine Raouafi

Beilstein J. Nanotechnol. 2015, 6, 1840–1852, doi:10.3762/bjnano.6.187

• ], which is consistent with a self-assembled monolayer of alkyl groups bearing terminal electroactive redox centers. The FcD/cfAuNPs/SPCE were conjugated with the antibody then covered by 3% BSA to avoid the oxidation of bare cfAuNPs (Figure 4a). The CV curves of FcD prior and after addition of the

• surface, through the formation of a ferrocene-terminated self-assembled monolayer, results in good ET rates from ferrocene to the electrode surface. This property allows using the modified surface to act as a transducer for immunosensing event. More importantly, the ferrocene, being attached to the

Imaging of carbon nanomembranes with helium ion microscopy

• André Beyer,
• Henning Vieker,
• Robin Klett,
• Hanno Meyer zu Theenhausen,
• Polina Angelova and
• Armin Gölzhäuser

Beilstein J. Nanotechnol. 2015, 6, 1712–1720, doi:10.3762/bjnano.6.175

• nanomembrane; helium ion microscopy; self-assembled monolayers; Introduction Carbon nanomembranes (CNMs) are extremely thin and homogeneous two-dimensional objects consisting of a monolayer of laterally cross-linked molecules. They are made by exposing a self-assembled monolayer (SAM) of aromatic molecules

Polymer blend lithography for metal films: large-area patterning with over 1 billion holes/inch²

• Cheng Huang,
• Alexander Förste,
• Stefan Walheim and
• Thomas Schimmel

Beilstein J. Nanotechnol. 2015, 6, 1205–1211, doi:10.3762/bjnano.6.123

• metal polymer blend lithography (metal PBL). The polymer blend lithography was applied in our earlier reports to fabricate self-assembled monolayer (SAM) patterns (monolayer PBL) [21], which were used, e.g., for the selective growth of ZnO nanostructures [22]. Instead of silicon wafers, other materials

Patterning technique for gold nanoparticles on substrates using a focused electron beam

• Takahiro Noriki,
• Shogo Abe,
• Kotaro Kajikawa and
• Masayuki Shimojo

Beilstein J. Nanotechnol. 2015, 6, 1010–1015, doi:10.3762/bjnano.6.104

• acid (98%) for 10 h to create a hydrophilic surface [16][17]. The substrate was then immersed in 3-glycidoxypropyltrimethoxysilane for 16 h. During this process, a self-assembled monolayer of molecules with an epoxy group was formed on the Si surface [18]. An ethanol solution (3 mL) of 2

• Figure 9. Step (i): the amino-undecanethiol method A thin gold film of 25 nm thickness was formed by sputtering on a Si plate sample. The sample was immersed in amino-1-undecanethiol in an ethanolic solution at a concentration of 1 mM for 3 h. In this process, a self-assembled monolayer was formed [20

A versatile strategy towards non-covalent functionalization of graphene by surface-confined supramolecular self-assembly of Janus tectons

• Ping Du,
• David Bléger,
• Fabrice Charra,
• Vincent Bouchiat,
• David Kreher,
• Fabrice Mathevet and
• André-Jean Attias

Beilstein J. Nanotechnol. 2015, 6, 632–639, doi:10.3762/bjnano.6.64

• evidenced by a typical STM image (Figure 7) recorded at the liquid–graphene interface at room temperature, a self-assembled monolayer is observed. By using the same procedure as in the case of a HOPG substrate, the lattice parameters of the network have been estimated. The main result is that they are

Self-assembled anchor layers/polysaccharide coatings on titanium surfaces: a study of functionalization and stability

• Ognen Pop-Georgievski,
• Dana Kubies,
• Josef Zemek,
• Neda Neykova,
• Roman Demianchuk,
• Eliška Mázl Chánová,
• Miroslav Šlouf,
• Milan Houska and
• František Rypáček

Beilstein J. Nanotechnol. 2015, 6, 617–631, doi:10.3762/bjnano.6.63

• immobilization of the BP molecules is verified by the significant changes in the IRRAS spectra (Figure 2A) of the original sodium neridronate powder and the neridronate self-assembled monolayer on the titanium surface. Similarly to the observations on different free phosphonic acids in aqueous solution [47][48

Synthesis, characterization, monolayer assembly and 2D lanthanide coordination of a linear terphenyl-di(propiolonitrile) linker on Ag(111)

• Zhi Chen,
• Svetlana Klyatskaya,
• José I. Urgel,
• David Écija,
• Olaf Fuhr,
• Willi Auwärter,
• Johannes V. Barth and
• Mario Ruben

Beilstein J. Nanotechnol. 2015, 6, 327–335, doi:10.3762/bjnano.6.31

• and Supporting Information File 1, Figure S3) in an antiparallel organisation of the end standing CN groups by dipole–dipole interactions. Formation of the self-assembled monolayer of 2 on Ag(111) In recent years, systematic studies of the self-assembly behavior of the series of polyphenylene

Localized surface plasmon resonances in nanostructures to enhance nonlinear vibrational spectroscopies: towards an astonishing molecular sensitivity

• Dan Lis and
• Francesca Cecchet

Beilstein J. Nanotechnol. 2014, 5, 2275–2292, doi:10.3762/bjnano.5.237

• substrate (15% of surface coverage) with the same thiophenol SAM (self-assembled monolayer) chemisorbed on a Au(111) monocrystal, the normalized intensity enhancement was estimated to be 21. Actually, a 1.5% NPs surface coverage already led to a significant SFG vibrational signature, which underlines the

Spectroscopic mapping and selective electronic tuning of molecular orbitals in phosphorescent organometallic complexes – a new strategy for OLED materials

• Pascal R. Ewen,
• Jan Sanning,
• Tobias Koch,
• Nikos L. Doltsinis,
• Cristian A. Strassert and
• Daniel Wegner

Beilstein J. Nanotechnol. 2014, 5, 2248–2258, doi:10.3762/bjnano.5.234

• to C2. Figure 6 depicts submolecularly resolved STM images of the molecules on Au(111). Both molecules are found in self-assembled monolayer islands containing only intact molecules. The overlay of the corresponding molecular structures again allows a straight-forward identification of each molecule

Carbon nano-onions (multi-layer fullerenes): chemistry and applications

• Juergen Bartelmess and
• Silvia Giordani

Beilstein J. Nanotechnol. 2014, 5, 1980–1998, doi:10.3762/bjnano.5.207

• that no significant cytotoxicity was observable, which renders this CNO material ideal for future biological applications. Toward the fabrication of CNO-biosensors, gold electrodes were initially decorated with a self-assembled monolayer of cysteamine on which the oxidized CNOs were deposited by an

High speed e-beam lithography for gold nanoarray fabrication and use in nanotechnology

• Jorge Trasobares,
• François Vaurette,
• Marc François,
• Hans Romijn,
• Jean-Louis Codron,
• Dominique Vuillaume,
• Didier Théron and
• Nicolas Clément

Beilstein J. Nanotechnol. 2014, 5, 1918–1925, doi:10.3762/bjnano.5.202

• . By comparing the four different techniques, we evidence the limiting parameters for the writing speed. Wafer-scale fabrication of such arrays with 50 nm pitch allowed XPS analysis of a ferrocenylalkyl thiol self-assembled monolayer coated gold nanoarray. Keywords: gold nanodot; gold nanoparticle

• application, chemical characterization of self-assembled monolayer coated gold nanoparticles is of prime importance, but it could not be achieved in [4][8] because a 1 cm2 nanoarray is required for comfortable XPS analysis. Whereas it would have required almost one full week of writing, we have written such

• for such SAMs on a gold substrate, which allows a direct comparison with the literature. A self-assembled monolayer (SAM) of 11-ferrocenyl-1-undecanethiol (FcC11)-coated gold nanoarray was characterized by XPS (Figure 4). The bare Au nanoarray shows no Fe 2p XPS signal confirming that the initial

Real-time monitoring of calcium carbonate and cationic peptide deposition on carboxylate-SAM using a microfluidic SAW biosensor

• Anna Pohl and
• Ingrid M. Weiss

Beilstein J. Nanotechnol. 2014, 5, 1823–1835, doi:10.3762/bjnano.5.193

• the interaction of calcium carbonate with standard carboxylate self-assembled monolayer sensor chips. Different fluids, with and without biomolecular components, were investigated. The pH-dependent surface interactions of two bio-inspired cationic peptides, AS8 and ES9, which are similar to an

• minerals in biomineralization processes. Acidic macromolecules comprise a significant fraction of the organic matrix of many mollusc shells [43][44][45], therefore a carboxylate-terminated self-assembled monolayer (COO-SAM) sensor chip was used to investigate under which conditions interactions related to

• . Experimental Biosensor measurements A commercial biosensor system sam®X (SAW Instruments, Bonn, Germany) equipped with carboxyl-terminated self-assembled monolayer (SAM) coated Au sensor chips (SAW Instruments, Bonn, Germany) was used in this study. The surface acoustic wave phase signal as well as the

Hydrophobic interaction governs unspecific adhesion of staphylococci: a single cell force spectroscopy study

• Nicolas Thewes,
• Peter Loskill,
• Philipp Jung,
• Henrik Peisker,
• Markus Bischoff,
• Mathias Herrmann and
• Karin Jacobs

Beilstein J. Nanotechnol. 2014, 5, 1501–1512, doi:10.3762/bjnano.5.163

• contact angle measurements, this protocol enables the preparation of a self-assembled monolayer (SAM) with a thickness of about 2.6 nm and an rms roughness below 0.2 nm. In [21] it was shown that the SAM is hydrophobic, homogeneous, dense, upright and in all-trans configuration. The contact angles

Near-field photochemical and radiation-induced chemical fabrication of nanopatterns of a self-assembled silane monolayer

• Ulrich C. Fischer,
• Carsten Hentschel,
• Florian Fontein,
• Linda Stegemann,
• Christiane Hoeppener,
• Harald Fuchs and
• Stefanie Hoeppener

Beilstein J. Nanotechnol. 2014, 5, 1441–1449, doi:10.3762/bjnano.5.156

• beads. Mask 2 is supported by a flexible polymer matrix and transferred to a water surface. It is then ready to be transferred to an APTES-functionalized solid surface. Before exposure in process 2 and process 3 the supporting polymer film is removed. A fluorescein self-assembled monolayer is used as a

• APTES SAM). After dissolving of the supporting polymer film, the sandwich of mask and SAM was exposed in process 2 to the oxygen plasma. After exposure, the mask was removed mechanically. During treatment with the oxygen plasma it is assumed that the APTES self-assembled monolayer is locally degraded in

• -assembled monolayer (SAM) of (3-aminopropyl)triethoxysilane (APTES) is explored with three different processes: 1) a near-field photochemical process by photochemical bleaching of a monomolecular layer of dye molecules chemically bound to an APTES SAM, 2) a chemical process induced by oxygen plasma etching