Hybrid Au@alendronate nanoparticles as dual chemo-photothermal agent for combined cancer treatment

• Anouchka Plan Sangnier,
• Romain Aufaure,
• Laurence Motte,
• Claire Wilhelm,
• Erwann Guenin and
• Yoann Lalatonne

Beilstein J. Nanotechnol. 2018, 9, 2947–2952, doi:10.3762/bjnano.9.273

• ) are used in the treatment of a variety of bone diseases, such as osteoporosis, solid tumor bone metastases and myeloma bone disease [1][2][3][4]. BPs contain two phosphonate groups linked by a common carbon atom (P–C–P) binding divalent metal ions (Ca2+, Mg2+, and Fe2+) by coordination of the two

• phosphonate groups. The BP affinity for calcium is improved by adding a hydroxy (–OH) group, for instance in HMBP (hydroxylmethylene bisphosphonate), allowing for a tridentate coordination to Ca2+ ions (Supporting Information File 1, Figure S4) and leading to a high affinity to bone (hydroxyapatite (Ca10(PO4

• internalized by the cells and accumulates preferentially into bone tissue. Benyettou et al. showed that alendronate-coated magnetic NPs favour the intratumoral uptake and inhibit tumor growth [10]. HMBPs are also effective ligands to stabilize nanoparticles under biological conditions [11][12][13][14][15

Comparative biological effects of spherical noble metal nanoparticles (Rh, Pd, Ag, Pt, Au) with 4–8 nm diameter

• Alexander Rostek,
• Marina Breisch,
• Kevin Pappert,
• Kateryna Loza,
• Marc Heggen,
• Manfred Köller,
• Christina Sengstock and
• Matthias Epple

Beilstein J. Nanotechnol. 2018, 9, 2763–2774, doi:10.3762/bjnano.9.258

• bands [91]. In order to analyse the influence of noble metal nanoparticles on the viability of cells, human mesenchymal stem cells (hMSCs) from bone marrow were cultured in the presence of different nanoparticles (50 µg mL−1) under cell culture conditions. All nanoparticles were easily dispersible in

Biomimetic and biodegradable cellulose acetate scaffolds loaded with dexamethasone for bone implants

• Aikaterini-Rafailia Tsiapla,
• Varvara Karagkiozaki,
• Veroniki Bakola,
• Foteini Pappa,
• Panagiota Gkertsiou,
• Eleni Pavlidou and
• Stergios Logothetidis

Beilstein J. Nanotechnol. 2018, 9, 1986–1994, doi:10.3762/bjnano.9.189

• using an electrostatically charged jet of polymer solution [6]. It should be mentioned that such electrospun scaffolds are a very promising approach for the regeneration and repair of bones and related tissue [7] in total hip replacement or bone-fracture repair. The number of patients in need of such

• surgeries is envisaged to increase rapidly either as the people get older or due to car accidents [8][9][10]. All bone substitute materials must be bioactive and behave similarly to healthy bones [11]. There is a steadily increasing interest in natural, semi-synthetic and synthetic polymeric biomaterials as

• this nanoplatform cytocompatible. In future studies, the interaction with musculoskeletal tissues will be examined with other cell lines such as mesenchymal stem cells (MSCs) or bone marrow stromal cells (BMSC) in order to evaluate the tissue specific response to our scaffolds. This cytocompatible

Preparation of micro/nanopatterned gelatins crosslinked with genipin for biocompatible dental implants

• Reika Makita,
• Tsukasa Akasaka,
• Seiichi Tamagawa,
• Yasuhiro Yoshida,
• Saori Miyata,
• Hirofumi Miyaji and
• Tsutomu Sugaya

Beilstein J. Nanotechnol. 2018, 9, 1735–1754, doi:10.3762/bjnano.9.165

• surface of the tooth to the alveolar bone by their position and orientation. The resulting periodontal ligament fibers exhibit micro/nanopatterns arising as a result of the shape of bundles of collagen fibers [16][17][18]. Thus, coating surfaces with collagen has been used for dental implants to allow

• implants [21][22]. It is also used as an absorbable hemostatic sponge to provide an occlusive matrix [23][24] and as a bone healing material in tissue engineering [25][26] in the field of dentistry. Recent studies have attempted to regenerate collagen fibers, lost as a result of periodontal disease, using

• estimate bone-related functions of osteoblasts in the future. Swelling and degradation of the different gelatin patterns examined here in the presence of cell culture medium were largely influenced by the concentration of genipin. In general, gelatin patterns with a lower degree of crosslinking had a

Nanocomposites comprised of homogeneously dispersed magnetic iron-oxide nanoparticles and poly(methyl methacrylate)

• Sašo Gyergyek,
• David Pahovnik,
• Ema Žagar,
• Alenka Mertelj,
• Rok Kostanjšek,
• Miloš Beković,
• Marko Jagodič,
• Heinrich Hofmann and
• Darko Makovec

Beilstein J. Nanotechnol. 2018, 9, 1613–1622, doi:10.3762/bjnano.9.153

• fractured vertebra. Vertebra tumors fracture vertebra and could be treated by magnetically induced hyperthermia with the same material as used for vertebroplasty if magnetic nanoparticles were incorporated. Acrylic-based bone cements are based on mixing a liquid component with a powder to form a dough-like

Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations

• Jaison Jeevanandam,
• Ahmed Barhoum,
• Yen S. Chan,
• Alain Dufresne and
• Michael K. Danquah

Beilstein J. Nanotechnol. 2018, 9, 1050–1074, doi:10.3762/bjnano.9.98

• , proteins, antibodies and DNA. A list of nanostructures that exist in the human body is presented in Table 1. Even some works categorize bone as a nanomaterial comprised of hierarchical inorganic nano-hydroxyapatite and organic collagen [243]. Additionally, micro-organisms such as viruses and bacteria are

• nanostructures that can cause diseases in humans. Bone nanostructures The inimitable combination of natural bone with precise and carefully engineered interfaces and mechanical properties is due to their nanoscale to macroscopic architectural design and dimensions. The interaction of micro/nanoscale components

• and a micrometer range length comprise the main building blocks of the ECM [249]. Bone is a multifaceted composite with numerous hierarchical levels as shown in Figure 8. The cortical bone with a compact shell and the spongiosa or trabecular bone with a porous core are the two important parts of bone

Bioinspired self-healing materials: lessons from nature

• Joseph C. Cremaldi and
• Bharat Bhushan

Beilstein J. Nanotechnol. 2018, 9, 907–935, doi:10.3762/bjnano.9.85

• subsections, as seen in the first column of Table 1. Fauna will be broken down by vertebrates, animals with a spinal cord, and invertebrates, those animals without a spinal cord or skeleton. Additionally, healing will be broken into soft tissue wounds and hard tissue (e.g., bone or exoskeleton) wounds for

• cellular response. The cells meant to maintain homeostasis around the PNS, Schwann cells, and clear away material to help neuron regrowth (rather than scarring as is seen in the CNS) and restore function. Vertebrate hard tissue: Hard tissue in vertebrates refers to bone. Bones are the porous and

• mineralized structure that creates the skeletal system. They house the marrow, nerves, and blood vessels that make up vital systems to homeostasis and ensure regular function of vertebrate bodies [52]. When a bone break occurs, both soft tissue damage (in encased blood vessels) and nerve damage occur as well

Nanoparticle delivery to metastatic breast cancer cells by nanoengineered mesenchymal stem cells

• Liga Saulite,
• Karlis Pleiko,
• Ineta Popena,
• Dominyka Dapkute,
• Ricardas Rotomskis and
• Una Riekstina

Beilstein J. Nanotechnol. 2018, 9, 321–332, doi:10.3762/bjnano.9.32

• and their immune privileged nature, mesenchymal stem cells (MSCs) can be used as a delivery vehicle for therapeutic and imaging agents, such as drug-conjugated NPs [3][4]. MSCs are adult stem cells that can be isolated from various organs, including brain, liver, kidney, lung, bone marrow, muscle

• bone marrow MSCs where CD29, CD44, CD73, CD90, and CD105 expression decreased after 7 days in 3D culture. To the contrary, haematopoietic marker CD34 and CD45 expression was increased [41]. CD90 is one of the key markers used for MSC characterisation [24]. In our hands Hoechst, 3,3

Liquid-crystalline nanoarchitectures for tissue engineering

• Baeckkyoung Sung and
• Min-Ho Kim

Beilstein J. Nanotechnol. 2018, 9, 205–215, doi:10.3762/bjnano.9.22

• ) [40]. Locally ordered collagen type-I gels, obtained by solvent evaporation, could induce an aligned 2D growth of human mesenchymal stem cells as well as their guided differentiation into bone tissues within two weeks in osteogenic media [86]. The concentrated (ca. 90 mg/mL) collagen type-I film

Ester formation at the liquid–solid interface

• Nguyen T. N. Ha,
• Thiruvancheril G. Gopakumar,
• Nguyen D. C. Yen,
• Carola Mende,
• Lars Smykalla,
• Maik Schlesinger,
• Roy Buschbeck,
• Tobias Rüffer,
• Heinrich Lang,
• Michael Mehring and
• Michael Hietschold

Beilstein J. Nanotechnol. 2017, 8, 2139–2150, doi:10.3762/bjnano.8.213

• LP0: the unit cell (parallelogram) contains two TMA and two undecanol molecules; A and B are unit cell parameters and θ is the angle embedded between them. β is the angle between the molecular axis of the undecanol back bone and the long axis of the unit cell. α describes the relative orientation of

(Metallo)porphyrins for potential materials science applications

• Lars Smykalla,
• Carola Mende,
• Michael Fronk,
• Pablo F. Siles,
• Michael Hietschold,
• Georgeta Salvan,
• Dietrich R. T. Zahn,
• Oliver G. Schmidt,
• Tobias Rüffer and
• Heinrich Lang

Beilstein J. Nanotechnol. 2017, 8, 1786–1800, doi:10.3762/bjnano.8.180

• herring-bone reconstruction of the underlying Au(111) is visible through the large ordered areas (U = −0.7 V). (b) Magnification of the adlayer structure of CuTPP(Br)8 on Au(111) with elongated appearance of molecules at U = −1 V. The cyan arrow indicates the direction of one unit cell vector of the Au

Surface functionalization of 3D-printed plastics via initiated chemical vapor deposition

• Christine Cheng and
• Malancha Gupta

Beilstein J. Nanotechnol. 2017, 8, 1629–1636, doi:10.3762/bjnano.8.162

• 3DP applications, because it allows for tuning of bulk properties, such as cost-effectiveness or structural rigidity, independently of sophisticated surface functionalization. For example, in scaffolds for bone tissue engineering, angiogenesis is a major challenge, because printed scaffolds have

Calcium fluoride based multifunctional nanoparticles for multimodal imaging

• Marion Straßer,
• Joachim H. X. Schrauth,
• Sofia Dembski,
• Daniel Haddad,
• Bernd Ahrens,
• Stefan Schweizer,
• Bastian Christ,
• Alevtina Cubukova,
• Marco Metzger,
• Heike Walles,
• Peter M. Jakob and
• Gerhard Sextl

Beilstein J. Nanotechnol. 2017, 8, 1484–1493, doi:10.3762/bjnano.8.148

• biocompatible agents for bone and teeth reconstruction [23]. Calcium fluoride exhibits a wide transparent spectral window (190–1100 nm), large band gap (approx. 12 eV), low refractive index and low phonon energy [14]. Because of the high stability and flexibility of the fluorite structure, a number of various

Micro- and nano-surface structures based on vapor-deposited polymers

• Hsien-Yeh Chen

Beilstein J. Nanotechnol. 2017, 8, 1366–1374, doi:10.3762/bjnano.8.138

• were employed to co-immobilize fibroblast growth factor 2 (FGF-2) and bone morphogenetic protein 2 (BMP-2) and established reverse gradient distributions of the FGF-2 and BMP-2. Furthermore, these two growth factors gradients have demonstrated the corresponding biological activities toward both

Nano-engineered skin mesenchymal stem cells: potential vehicles for tumour-targeted quantum-dot delivery

• Liga Saulite,
• Dominyka Dapkute,
• Karlis Pleiko,
• Ineta Popena,
• Simona Steponkiene,
• Ricardas Rotomskis and
• Una Riekstina

Beilstein J. Nanotechnol. 2017, 8, 1218–1230, doi:10.3762/bjnano.8.123

• drug carriers [3]. Recent studies have shown that nano-engineered mesenchymal stem cells (MSCs) could be used as tumour-targeted therapeutic carriers, reflecting their tumour-homing capabilities [4][5][6]. MSCs are present in many tissues of the human body, including bone marrow, adipose tissues, skin

• affect the osteogenesis and chondrogenesis capacities of bone marrow MSCs [17]. The impact of QD labelling on the biological properties of targeted stem cells, such as proliferation, cell cycle, and apoptosis, remains elusive. Therefore, further research on MSCs with regard to the delivery of QDs for

• biological response of skin MSCs to QDs was investigated. The results showed that QDs do not induce changes in immunophenotype, proliferation and viability of skin MSCs, indicating that QDs are biocompatible with MSCs. These results are consistent with those of studies on bone marrow mesenchymal stem cells

Adsorption characteristics of Er₃N@C₈₀on W(110) and Au(111) studied via scanning tunneling microscopy and spectroscopy

• Sebastian Schimmel,
• Zhixiang Sun,
• Danny Baumann,
• Denis Krylov,
• Nataliya Samoylova,
• Alexey Popov,
• Bernd Büchner and
• Christian Hess

Beilstein J. Nanotechnol. 2017, 8, 1127–1134, doi:10.3762/bjnano.8.114

• , as is typical for a clean Au(111) surface, the herring bone reconstruction occurred. The success of these prior treatments was checked by STM before depositing the molecules. After that the thermally stable endohedral fullerenes Er3N@C80 were evaporated from a home-built and carefully degassed

Bio-inspired micro-to-nanoporous polymers with tunable stiffness

• Julia Syurik,
• Ruth Schwaiger,
• Prerna Sudera,
• Stephan Weyand,
• Siegbert Johnsen,
• Gabriele Wiegand and
• Hendrik Hölscher

Beilstein J. Nanotechnol. 2017, 8, 906–914, doi:10.3762/bjnano.8.92

• several examples of porous structures and composites having excellent mechanical properties that surpass the properties of the constituent materials. Prominent examples are wood, bone, or bird beaks [1]. The outstanding properties of the pomelo peel, though, are less known. The pomelo (Citrus maxima) is a

Hybrid nanomaterials: from the laboratory to the market

• Verónica de Zea Bermudez,
• Fabrice Leroux,
• Pierre Rabu and
• Andreas Taubert

Beilstein J. Nanotechnol. 2017, 8, 861–862, doi:10.3762/bjnano.8.87

• -performance materials such as bone or teeth are organic/inorganic hybrid materials of multiscale hierarchical structure and chemical composition perfectly matched to their respective task. As a result, hybrid materials have been explored for essentially all applications possible. Their chemical composition

Recombinant DNA technology and click chemistry: a powerful combination for generating a hybrid elastin-like-statherin hydrogel to control calcium phosphate mineralization

• Mohamed Hamed Misbah,
• Mercedes Santos,
• Luis Quintanilla,
• Christina Günter,
• Matilde Alonso,
• Andreas Taubert and
• José Carlos Rodríguez-Cabello

Beilstein J. Nanotechnol. 2017, 8, 772–783, doi:10.3762/bjnano.8.80

• these CP structures, dicalcium phosphate dihydrate (DCPD), hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP) have attracted attention because of their potential applications [2][3]. HA is a stable crystalline phase that forms the main inorganic component of bone and teeth [2][4]. HA has a nanorod

• morphology in natural bone, with the individual rods being roughly aligned parallel to one another throughout the collagen matrix [5][6][7]. β-TCP is a resorbable and degradable synthetic material that can be replaced by naturally re-grown bone tissue [2][3]. As a result, HA and β-TCP have already been used

• in (composite) materials for bone regeneration [2][8]. Due to the correlation between the (crystal) structure and properties of CP, it is important to be able to control its nanostructures [9][10][11]. For example, hollow and mesoporous CP particles can be used for drug delivery due to their high

Diffusion and surface alloying of gradient nanostructured metals

• Zhenbo Wang and
• Ke Lu

Beilstein J. Nanotechnol. 2017, 8, 547–560, doi:10.3762/bjnano.8.59

• amorphous titania. Furthermore, the formed titania showed an increased crystallinity and retained the nanoporous structure even after calcination at 600 °C [94]. These works indicated the possibility to improve the bioactivity of titanium bone implants and to accelerate osseointegration by introducing a

Biological and biomimetic materials and surfaces

• Stanislav Gorb and
• Thomas Speck

Beilstein J. Nanotechnol. 2017, 8, 403–407, doi:10.3762/bjnano.8.42

• articles of this Thematic Series, Egorov et al. proposed a relatively simple protocol for 3D printing of complex-shaped biocompatible structures based on sodium alginate and calcium phosphate for bone tissue engineering [24]. The analysis of 3D printed structures shows that they possess large

The cleaner, the greener? Product sustainability assessment of the biomimetic façade paint Lotusan^® in comparison to the conventional façade paint Jumbosil^®

• Florian Antony,
• Rainer Grießhammer,
• Thomas Speck and
• Olga Speck

Beilstein J. Nanotechnol. 2016, 7, 2100–2115, doi:10.3762/bjnano.7.200

• flectofin® [6][9] or the bone-like ceiling of a lecture hall at the University of Freiburg [10][11]. The increasingly systematic research approach of biomimetics, aiming to find the most promising examples from biology for the development of technical innovations, has been accompanied by a debate about the

3D printing of mineral–polymer bone substitutes based on sodium alginate and calcium phosphate

• Aleksey A. Egorov,
• Alexander Yu. Fedotov,
• Anton V. Mironov,
• Vladimir S. Komlev,
• Vladimir K. Popov and
• Yury V. Zobkov

Beilstein J. Nanotechnol. 2016, 7, 1794–1799, doi:10.3762/bjnano.7.172

• calcium phosphate (CP) for bone tissue engineering. The fabrication of 3D composite structures was performed through the synthesis of inorganic particles within a biopolymer macromolecular network during 3D printing process. The formation of a new CP phase was studied through X-ray diffraction, Fourier

• diameter ≈800 μm) and were found to possess compressive strengths from 0.45 to 1.0 MPa. This new approach can be effectively applied for fabrication of biocompatible scaffolds for bone tissue engineering constructions. Keywords: 3D printing; bone graft; calcium phosphate; composite materials; sodium

• popular biomaterial because of a number of key advantages: convenient precursors, nontoxic, excellent biocompatibility and appropriate biodegradability [5][6][7]. Additionally, CPs are widely used for bone graft substitution due to their chemical affinity to the bone mineral content [8]. One of the

Influence of hydrothermal synthesis parameters on the properties of hydroxyapatite nanoparticles

• Sylwia Kuśnieruk,
• Jacek Wojnarowicz,
• Agnieszka Chodara,
• Tadeusz Chudoba,
• Stanislaw Gierlotka and
• Witold Lojkowski

Beilstein J. Nanotechnol. 2016, 7, 1586–1601, doi:10.3762/bjnano.7.153

• production of toothpaste formulations and to speed up wound healing. There are patches and ointments using the unique properties of HAp that were developed by scientists in Poland [7]. Hydroxyapatite has also received great interest in the regeneration of animal bone loss. It has been proved that HAp

• nanoparticles (nano-HAp) are better positioned to serve as an apatite substitute of bone in biomedical applications than micrometer-sized hydroxyapatite (micro-HAp) [8]. The impact of nano-HAp particles with different morphology on highly malignant melanoma cells was analyzed. The obtained results showed that

• proliferation of such malignant cells was inhibited more efficiently by the occurrence of the nanoscale effect than by HAp particle morphology [9]. Another study analyzed the effects of different sized nano-HAp – ranging from 20 to 80 nm – on the proliferation of bone-related cells (bone marrow mesenchyme stem

Viability and proliferation of endothelial cells upon exposure to GaN nanoparticles

• Tudor Braniste,
• Ion Tiginyanu,
• Tibor Horvath,
• Simion Raevschi,
• Serghei Cebotari,
• Marco Lux,
• Axel Haverich and
• Andres Hilfiker

Beilstein J. Nanotechnol. 2016, 7, 1330–1337, doi:10.3762/bjnano.7.124

• of premature tissue damage and dispensing of medications. Nature supplies many examples of biomimetic materials in the form of organic/inorganic components such as bone, teeth, and muscle. Based on biological examples, new and innovative biological materials can be designed through self-organization