Noble metal-modified titania with visible-light activity for the decomposition of microorganisms

• Maya Endo,
• Zhishun Wei,
• Kunlei Wang,
• Baris Karabiyik,
• Kenta Yoshiiri,
• Paulina Rokicka,
• Bunsho Ohtani,
• Agata Markowska-Szczupak and
• Ewa Kowalska

Beilstein J. Nanotechnol. 2018, 9, 829–841, doi:10.3762/bjnano.9.77

• , by morphology design [22][23][24][25][26], surface modification [27][28][29][30][31][32], doping [33][34][35][36], or the formation of heterojunctions with other semiconductors [37][38][39][40]. Modification with noble metals seems the most promising as it is well known that under UV irradiation

Facile synthesis of a ZnO–BiOI p–n nano-heterojunction with excellent visible-light photocatalytic activity

• Mengyuan Zhang,
• Jiaqian Qin,
• Pengfei Yu,
• Bing Zhang,
• Mingzhen Ma,
• Xinyu Zhang and
• Riping Liu

Beilstein J. Nanotechnol. 2018, 9, 789–800, doi:10.3762/bjnano.9.72

• heterojunctions could promote increased photocatalytic activity efficiency. Once the p–n junction has been formed, the inner electric field between the inner surface of two semiconductors will promote the separation efficiency of photoinduced electron–hole pairs [30][31]. Consequently, coupling an n-type metal

• properties [33]. In 2014, spin-coating was utilized to prepare ZnO nanowire arrays with tunable band gap, layered BiOBr–BiOI composites onto them. It showed that the BiOBr/BiOI composites played the role of sensitizer in the heterojunctions and were tunable by varying the BiOBr/BiOI ratio [34]. Kuang et al

• cutoff value is about 1.22 eV. The change in the state, along with the difference in the shape from pure BiOI and ZnO, is probably due to the band bending attributed to the formation of ZnO–BiOI heterojunctions, as its Bi/Zn molar ratio is 1:3. Optical properties To investigate the photo-induced charge

Perovskite-structured CaTiO₃ coupled with g-C₃N₄ as a heterojunction photocatalyst for organic pollutant degradation

• Ashish Kumar,
• Christian Schuerings,
• Suneel Kumar,
• Ajay Kumar and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2018, 9, 671–685, doi:10.3762/bjnano.9.62

• heterojunctions are of great interest in the photocatalysis domain for achieving environmental sustainability [10][11]. These nanocomposites are known for their greater photogenerated electron–hole mobility across the heterojunction interface, which reduces the distance and time of charge transport to impede

• their recombination rate [12][13]. The 2D–2D heterojunctions exhibit larger face-to-face contact area as compared with the line-to-face contact (1D–2D) and point-to-face contact (0D–2D) photocatalysts, which is responsible for their enhanced photocatalytic activity [14]. It is worth mentioning here that

• ) CTCN heterojunctions. TEM images of (a, b) g-C3N4 nanosheets, (c, d) CT flakes and (e, f) CTCN heterojunction. (a) UV–visible diffuse reflectance spectroscopy (DRS) spectra for g-C3N4, CT and CTCN heterojunction; Plot of transformed Kubelka–Munk function vs energy for (b) g-C3N4, (c) CT and (d) CTCN

Sugarcane juice derived carbon dot–graphitic carbon nitride composites for bisphenol A degradation under sunlight irradiation

• Lan Ching Sim,
• Jing Lin Wong,
• Chen Hong Hak,
• Jun Yan Tai,
• Kah Hon Leong and
• Pichiah Saravanan

Beilstein J. Nanotechnol. 2018, 9, 353–363, doi:10.3762/bjnano.9.35

• superior photocatalytic activity was demonstrated [8]. Guo and co-workers used the electrochemical method to produce CDs from graphite rods. The deposition of CDs onto g-C3N4/ZnO heterojunctions enhanced the degradation of tetracycline by absorbing a wider spectrum of visible light and suppressing the

Facile synthesis of silver/silver thiocyanate (Ag@AgSCN) plasmonic nanostructures with enhanced photocatalytic performance

• Xinfu Zhao,
• Dairong Chen,
• Abdul Qayum,
• Bo Chen and
• Xiuling Jiao

Beilstein J. Nanotechnol. 2017, 8, 2781–2789, doi:10.3762/bjnano.8.277

• -based semiconductors are well known due to their excellent visible-light catalytic properties, but their easy inactivation limits their utilization in practice. Aimed at this problem, a series of methods, such as doping, surface sensitization, heterojunctions and noble-metal plasma, have been adopted to

CdSe nanorod/TiO₂ nanoparticle heterojunctions with enhanced solar- and visible-light photocatalytic activity

• Fakher Laatar,
• Hatem Moussa,
• Halima Alem,
• Lavinia Balan,
• Emilien Girot,
• Ghouti Medjahdi,
• Hatem Ezzaouia and
• Raphaël Schneider

Beilstein J. Nanotechnol. 2017, 8, 2741–2752, doi:10.3762/bjnano.8.273

• noble metal particles, or constructing heterojunctions between TiO2 and graphene-based materials or carbon nitride (C3N4), acting as electron-transport materials [3][4][5]. All of these strategies have the common goal of decreasing the charge carrier recombination rate by increasing the spatial charge

Charge transfer from and to manganese phthalocyanine: bulk materials and interfaces

• Florian Rückerl,
• Daniel Waas,
• Bernd Büchner,
• Martin Knupfer,
• Dietrich R. T. Zahn,
• Francisc Haidu,
• Torsten Hahn and
• Jens Kortus

Beilstein J. Nanotechnol. 2017, 8, 1601–1615, doi:10.3762/bjnano.8.160

• ordered interfaces of this kind were realized by depositing one of the two phthalocyanines on a gold(100) single crystal, which resulted in well-oriented thin films [125][126][127]. Subsequently, the partner phthalocyanine was deposited on top, which finally gave rise to well-ordered heterojunctions as

Two-dimensional carbon-based nanocomposites for photocatalytic energy generation and environmental remediation applications

• Suneel Kumar,
• Ashish Kumar,
• Ashish Bahuguna,
• Vipul Sharma and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2017, 8, 1571–1600, doi:10.3762/bjnano.8.159

• nanocomposite heterojunctions can drastically enhance the photocatalytic efficiency by enhanced light absorption in combination with narrow band gap semiconductors, cocatalytic effect, which results in and the formation of a p–n heterojunction or Schottky junction, which can effectively suppress the

• . Recently, the coupling of g-C3N4 with various metal oxides/sulfides, composite oxides, BiOX halides (X = Cl, Br, I), AgX, noble metals and graphene has attracted great attention for the formation of heterojunctions with excellent light absorption and charge transfer kinetics, which is discussed in the

• the interfacial contact area is very large as compared to other heterojunctions, such as point-to-line contact (OD-1D), point-to-face contact (0D-2D), line-to-line contact (1D-1D) and line-to-face contact (1D-2D). The optimized 30% CaIn2S4-g-C3N4 nanocomposite showed a H2 evolution rate of 102 μmol g

Deposition of exchange-coupled dinickel complexes on gold substrates utilizing ambidentate mercapto-carboxylato ligands

• Martin Börner,
• Laura Blömer,
• Marcus Kischel,
• Peter Richter,
• Georgeta Salvan,
• Dietrich R. T. Zahn,
• Pablo F. Siles,
• Maria E. N. Fuentes,
• Carlos C. B. Bufon,
• Daniel Grimm,
• Oliver G. Schmidt,
• Daniel Breite,
• Bernd Abel and
• Berthold Kersting

Beilstein J. Nanotechnol. 2017, 8, 1375–1387, doi:10.3762/bjnano.8.139

• -rolled-up nanomembranes [63][64]. Standard two point measurements at room temperature were carried out for the electrical characterization of the heterojunctions (Supporting Information File 1). The data analysis provides a characteristic transition voltage (VT) of 0.50 ± 0.05 V, a value which, albeit

Charge transport in organic nanocrystal diodes based on rolled-up robust nanomembrane contacts

• Vineeth Kumar Bandari,
• Lakshmi Varadharajan,
• Longqian Xu,
• Abdur Rehman Jalil,
• Mirunalini Devarajulu,
• Pablo F. Siles,
• Feng Zhu and
• Oliver G. Schmidt

Beilstein J. Nanotechnol. 2017, 8, 1277–1282, doi:10.3762/bjnano.8.129

• diodes contacted by rolled-up robust nanomembranes. The organic nanocrystals consist of vanadyl phthalocyanine and copper hexadecafluorophthalocyanine heterojunctions. The temperature dependent charge transport through organic nanocrystals was investigated to reveal the transport properties of ohmic and

• contacts. The nanocrystals consist of vanadyl phthalocyanine (VOPc) and copper hexadecafluorophthalocyanine (F16CuPc) heterojunctions. The temperature dependent current–voltage behaviors were investigated to unveil the charge transport properties of the nanocrystals. As most of the well-studied charge

Energy-level alignment at interfaces between manganese phthalocyanine and C₆₀

• Daniel Waas,
• Florian Rückerl,
• Martin Knupfer and
• Bernd Büchner

Beilstein J. Nanotechnol. 2017, 8, 927–932, doi:10.3762/bjnano.8.94

• Daniel Waas Florian Ruckerl Martin Knupfer Bernd Buchner IFW Dresden, P.O. Box 270116, D-01171 Dresden, Germany 10.3762/bjnano.8.94 Abstract We have used photoelectron spectroscopy to determine the energy-level alignment at organic heterojunctions made of manganese phthalocyanine (MnPc) and the

• investigations a pre-cleaned Au(100) crystal, controlled by core-level PES spectra, was used as a substrate, on which the MnPc/C60 heterojunctions were prepared. The fullerene and manganese phthalocyanine films were grown step by step at room temperature via evaporation of the two materials from home-built

•  1a and Figure 1b, we present the valence-band data as obtained from the freshly prepared gold substrate, from the starting layers of C60 and MnPc, respectively, and from the organic heterojunctions MnPc/C60 and C60/MnPc as a function of the respective layer thickness of the organic material on top

Nanocrystalline TiO₂/SnO₂ heterostructures for gas sensing

• Barbara Lyson-Sypien,
• Anna Kusior,
• Mieczylaw Rekas,
• Jan Zukrowski,
• Marta Gajewska,
• Katarzyna Michalow-Mauke,
• Thomas Graule,
• Marta Radecka and
• Katarzyna Zakrzewska

Beilstein J. Nanotechnol. 2017, 8, 108–122, doi:10.3762/bjnano.8.12

• heterojunctions for hydrogen sensing. Nanopowders of pure SnO2, 90 mol % SnO2/10 mol % TiO2, 10 mol % SnO2/90 mol % TiO2 and pure TiO2 have been obtained using flame spray synthesis (FSS). The samples have been characterized by BET, XRD, SEM, HR-TEM, Mössbauer effect and impedance spectroscopy. Gas-sensing

• to the adsorption of oxygen ions at the surface of nanomaterials. Keywords: gas sensors; hydrogen; n–n heterojunctions; nanomaterials; TiO2/SnO2; Introduction The TiO2–SnO2 system is extremely important for gas sensing as already proved by many works already published [1][2][3][4][5][6][7][8][9][10

• ) while changes of the morphological and the electronic structure dominate in the case of B) and D). Surface phenomena determine the gas-sensor response in the case of decorated nano-heterostructures, D). As shown in [6], electron transfer over n–n-type heterojunctions can account for sensor sensitization

Role of RGO support and irradiation source on the photocatalytic activity of CdS–ZnO semiconductor nanostructures

• Suneel Kumar,
• Rahul Sharma,
• Vipul Sharma,
• Gurunarayanan Harith,
• Vaidyanathan Sivakumar and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2016, 7, 1684–1697, doi:10.3762/bjnano.7.161

• nanostructures. Another unique aspect of this work is the formation of efficient binary and ternary heterojunctions having nanoparticles (NP), nanorods (NR) and nanosheets (NS), comprising of CdS, ZnO and RGO, respectively. In this work, , the preparation and detailed characterization of binary and ternary

Nanostructured germanium deposited on heated substrates with enhanced photoelectric properties

• Ionel Stavarache,
• Valentin Adrian Maraloiu,
• Petronela Prepelita and
• Gheorghe Iordache

Beilstein J. Nanotechnol. 2016, 7, 1492–1500, doi:10.3762/bjnano.7.142

• devices individually or with other materials, hence the possibility of fabricating various heterojunctions on Si, glass or flexible substrates for future development of Si-based integrated optoelectronics. Keywords: germanium nanoparticle; photocurrent; photodetectors; response time; transport mechanism

• structures and devices individually or with other materials. This yields the possibility of fabricating various heterojunctions on Si for the future development of Si-based integrated optoelectronics. Results and Discussion In this section the results on structural, electrical and photoelectrical properties

• % over the whole investigated frequency range (1–4 kHz), which is a good result compared with other new materials and test structures reported in literature (18% in the case of graphene monolayer/germanium heterojunctions or about 13% for MoS2/Si heterojunctions) [48][49]. This is an indication of the

The effect of dry shear aligning of nanotube thin films on the photovoltaic performance of carbon nanotube–silicon solar cells

• Benedikt W. Stolz,
• Daniel D. Tune and
• Benjamin S. Flavel

Beilstein J. Nanotechnol. 2016, 7, 1486–1491, doi:10.3762/bjnano.7.141

• acceptors such as fullerenes [9][10][11][12]. Carbon nanotube–silicon heterojunctions can also function as solar cells [13][14] and over the last few years of development the power conversion efficiency (PCE) of these devices has been steadily increasing [15][16][17][18][19][20][21][22], with the most

Ammonia gas sensors based on In₂O₃/PANI hetero-nanofibers operating at room temperature

• Qingxin Nie,
• Zengyuan Pang,
• Hangyi Lu,
• Yibing Cai and
• Qufu Wei

Beilstein J. Nanotechnol. 2016, 7, 1312–1321, doi:10.3762/bjnano.7.122

• sensor was exposed to air, NH3 is volatilized and the resistance of the PANI composite nanofibers is reduced. Therefore, due to the unique mechanism, PANI (emeraldine salt) based sensors exhibited a great selectivity to NH3. As the I–V characteristics show, it is confirmed that p–n heterojunctions had

High-resolution noncontact AFM and Kelvin probe force microscopy investigations of self-assembled photovoltaic donor–acceptor dyads

• Benjamin Grévin,
• Pierre-Olivier Schwartz,
• Laure Biniek,
• Martin Brinkmann,
• Nicolas Leclerc,
• Elena Zaborova and
• Stéphane Méry

Beilstein J. Nanotechnol. 2016, 7, 799–808, doi:10.3762/bjnano.7.71

• dyads are used as model nanostructured heterojunctions for local investigations by noncontact atomic force microscopy (nc-AFM) and Kelvin probe force microscopy (KPFM). With the aim to probe the photo-induced charge carrier generation, thin films deposited on transparent indium tin oxide substrates are

• , SPV contrasts were resolved at the scale of single edge-on lamellae, which is an important step towards local investigations of photovoltaic self-assembled donor–acceptor heterojunctions at the submolecular scale. Molecular structures of the investigated A–Dn co-oligomers (in this study n = 1 or n = 3

Bacteriorhodopsin–ZnO hybrid as a potential sensing element for low-temperature detection of ethanol vapour

• Saurav Kumar,
• Sudeshna Bagchi,
• Senthil Prasad,
• Anupma Sharma,
• Ritesh Kumar,
• Rishemjit Kaur,
• Jagvir Singh and
• Amol P. Bhondekar

Beilstein J. Nanotechnol. 2016, 7, 501–510, doi:10.3762/bjnano.7.44

• heterojunctions at the ZnO/bR nanostructure, and the possibility of exchanging charge carriers at the hybrid interface, are expected to strongly affect the electronic properties of the resulting nano-hybrid material. The hybrid ZnO-TF/bR and ZnO-NR/bR structures form the main percolative network through which

Synthesis and applications of carbon nanomaterials for energy generation and storage

• Marco Notarianni,
• Jinzhang Liu,
• Kristy Vernon and
• Nunzio Motta

Beilstein J. Nanotechnol. 2016, 7, 149–196, doi:10.3762/bjnano.7.17

Blue and white light emission from zinc oxide nanoforests

• Nafisa Noor,
• Luca Lucera,
• Thomas Capuano,
• Venkata Manthina,
• Alexander G. Agrios,
• Helena Silva and
• Ali Gokirmak

Beilstein J. Nanotechnol. 2015, 6, 2463–2469, doi:10.3762/bjnano.6.255

• ] and as phosphors [7]. ZnO typically grows as an n-type semiconductor due to oxygen deficiencies and has been used as the n-type material in heterojunctions [8], but there have also been significant efforts to produce high-quality p-type ZnO to form homojunction light emitting diodes (LED) that can

Current–voltage characteristics of manganite–titanite perovskite junctions

• Benedikt Ifland,
• Patrick Peretzki,
• Birte Kressdorf,
• Philipp Saring,
• Andreas Kelling,
• Michael Seibt and
• Christian Jooss

Beilstein J. Nanotechnol. 2015, 6, 1467–1484, doi:10.3762/bjnano.6.152

• with polaronic charge carriers. In particular, we studied manganite–titanate p–n heterojunctions made of n-doped SrTi1−yNbyO3, y = 0.002 and p-doped Pr1−xCaxMnO3, x = 0.34 having a strongly correlated electron system. The diffusion length of the polaron carriers was analyzed by electron beam-induced

• electrostatic potential is generated, which modifies the band structure at the interface. The modified interfacial band structure is successfully described by band bending of more or less rigid electron bands. In heterojunctions, materials with different bandgaps meet at the interface. In addition to band

• then applied to the analysis of data sets collected from PCMO/STNO p–n heterojunctions. Despite the absence of a band gap above the charge ordering temperature of TCO ≈ 240 K, photocarrier lifetimes in PCMO are of the order of ns [41]. The diffusion length of electron–hole-type excitations at room

Electronic interaction in composites of a conjugated polymer and carbon nanotubes: first-principles calculation and photophysical approaches

• Florian Massuyeau,
• Jany Wéry,
• Jean-Luc Duvail,
• Serge Lefrant,
• Abu Yaya,
• Chris Ewels and
• Eric Faulques

Beilstein J. Nanotechnol. 2015, 6, 1138–1144, doi:10.3762/bjnano.6.115

• technique can give insight on both radiative and non radiative recombination of charges and their dynamics across polymer–nanotube heterojunctions. The time-resolved PL data taken on the composites are presented in Figure 4a. The high-energy PL band at 2.41 eV, labelled 1, gains intensity with respect to

• separation of photogenerated excitons at polymer/SWNT interfaces across the heterojunctions. The radiative channel only occurs if the excitons remain trapped on short conjugated segments or migrate on longer PPV segments without encountering the SWNT network. In fact, the migration process is likely to

Effects of swift heavy ion irradiation on structural, optical and photocatalytic properties of ZnO–CuO nanocomposites prepared by carbothermal evaporation method

• Sini Kuriakose,
• D. K. Avasthi and
• Satyabrata Mohapatra

Beilstein J. Nanotechnol. 2015, 6, 928–937, doi:10.3762/bjnano.6.96

• -heterojunctions leading to a modification of optical and electronic properties, which finds promising applications in photocatalysis [30], sensors [31] and solar cells [32]. Several methods have been used to modify the optical, electrical and structural properties of nanostructured materials and nanocomposite

• ZnO–CuO nano-heterojunctions, electrons from the valance band are excited into the conduction band, leaving behind holes. The photogenerated electrons generated in the conduction band of CuO jump to the conduction band of ZnO, while the holes from the valance band of ZnO transfer to the valance band

Palladium nanoparticles anchored to anatase TiO₂ for enhanced surface plasmon resonance-stimulated, visible-light-driven photocatalytic activity

• Kah Hon Leong,
• Hong Ye Chu,
• Shaliza Ibrahim and
• Pichiah Saravanan

Beilstein J. Nanotechnol. 2015, 6, 428–437, doi:10.3762/bjnano.6.43

• the Pd(111) and anatase TiO2(101) planes, respectively [28][47][48][49]. This clearly proves the formation of heterojunctions between Pd and TiO2. Figure 3 shows the X-ray diffraction patterns of anatase TiO2 and Pd/TiO2 with different Pd loadings (0.5 wt %, 1.0 wt % and 3.0 wt %). Pure anatase TiO2

Low cost, p-ZnO/n-Si, rectifying, nano heterojunction diode: Fabrication and electrical characterization

• Vinay Kabra,
• Lubna Aamir and
• M. M. Malik

Beilstein J. Nanotechnol. 2014, 5, 2216–2221, doi:10.3762/bjnano.5.230

• semiconductors. Among them, ZnO (with a high band gap of 3.37 eV) [1][2] has been recognized as one of the most popular semiconducting materials for device fabrication due to its excellent electrical and optical properties [3][4]. Much work has been demonstrated for heterojunctions based on n- and p-type ZnO

• using solution-processed p-ZnO nanoparticles. The current–voltage (I–V) and capacitance–voltage (C–V) characteristics of heterojunctions were analyzed, resulting in rectification ratios of 101 and 232 (at 3 V) and cut-in voltages of 1.5 V and 0.9 V under dark and UV illumination, respectively