Walking energy harvesting and self-powered tracking system based on triboelectric nanogenerators

• Mingliang Yao,
• Guangzhong Xie,
• Qichen Gong and
• Yuanjie Su

Beilstein J. Nanotechnol. 2020, 11, 1590–1595, doi:10.3762/bjnano.11.141

• terephthalate) (PET) substrate. The Kapton film was fixed with a row of steel rods and heated, for 4 h in an oven at 100 °C, to achieve a wavy configuration. Copper foils were deposited onto both sides of the Kapton film by electron beam evaporation to form the wave-shaped electrode. The lead was connected to

Ultrasensitive detection of cadmium ions using a microcantilever-based piezoresistive sensor for groundwater

• Dinesh Rotake,
• Anand Darji and
• Nitin Kale

Beilstein J. Nanotechnol. 2020, 11, 1242–1253, doi:10.3762/bjnano.11.108

• to this may have a significant effect on maintaining the safety and security of human beings [2][3]. One common water contamination is caused by cadmium ions. There are numerous sources of Cd ions in groundwater, including industrial wastewater, mining industry, fossil fuels, iron and steel industry

Wet-spinning of magneto-responsive helical chitosan microfibers

• Dorothea Brüggemann,
• Johanna Michel,
• Naiana Suter,
• Matheus Grande de Aguiar and
• Michael Maas

Beilstein J. Nanotechnol. 2020, 11, 991–999, doi:10.3762/bjnano.11.83

• teflon-coated rotating needle with a stainless steel core at the bottom of the coagulation bath. The needle was placed perpendicular to the direction of the feedstock solution flow to facilitate subsequent fiber winding. For this purpose, a rotational movement of the needle was combined with a

• rotating needle with a stainless steel core, which simultaneously performed a translational movement to achieve a helical fiber shape. Supporting Information Supporting Information File 31: Additional experimental data. Supporting Information File 32: Video showing the magnetic manipulation of a helical

A 3D-polyphenylalanine network inside porous alumina: Synthesis and characterization of an inorganic–organic composite membrane

• Jonathan Stott and
• Jörg J. Schneider

Beilstein J. Nanotechnol. 2020, 11, 938–951, doi:10.3762/bjnano.11.78

• methanol followed by equilibration with 2 mL of deionized water with the same flow rate. The amount of adsorbed chloroanilic acid (analyte) was determined from the collected solution of the loading step by UV–vis spectroscopy at a wavelength of 331 nm [73]. The membranes were placed in a stainless-steel

Exfoliation in a low boiling point solvent and electrochemical applications of MoO₃

• Matangi Sricharan,
• Bikesh Gupta,
• Sreejesh Moolayadukkam and
• H. S. S. Ramakrishna Matte

Beilstein J. Nanotechnol. 2020, 11, 662–670, doi:10.3762/bjnano.11.52

• steel current collectors, separated by filter paper dipped in 1 M H2SO4 electrolyte. Results and Discussion LPE assisted by tip sonication is an effective technique to peel off mono- and few-layers from layered bulk materials. In the crystal structure of α-MoO3 the atoms are connected to layers through

Synthesis and acetone sensing properties of ZnFe₂O₄/rGO gas sensors

• Kaidi Wu,
• Yifan Luo,
• Ying Li and
• Chao Zhang

Beilstein J. Nanotechnol. 2019, 10, 2516–2526, doi:10.3762/bjnano.10.242

• glycerol (8 mL) under slow stirring. Secondly, 0.1098 g Zn(CH3COO)2·2H2O and 0.4042 g Fe(NO3)3·9H2O were dissolved in the obtained homogeneous solution under magnetic stirring for 1 h. Subsequently, the mixed solutions were transferred into a Teflon-lined stainless-steel autoclave (50 mL), and then

Design of a nanostructured mucoadhesive system containing curcumin for buccal application: from physicochemical to biological aspects

• Sabrina Barbosa de Souza Ferreira,
• Gustavo Braga,
• Évelin Lemos Oliveira,
• Jéssica Bassi da Silva,
• Hélen Cássia Rosseto,
• Lidiane Vizioli de Castro Hoshino,
• Mauro Luciano Baesso,
• Wilker Caetano,
• Craig Murdoch,
• Helen Elizabeth Colley and
• Marcos Luciano Bruschi

Beilstein J. Nanotechnol. 2019, 10, 2304–2328, doi:10.3762/bjnano.10.222

Design and facile synthesis of defect-rich C-MoS₂/rGO nanosheets for enhanced lithium–sulfur battery performance

• Chengxiang Tian,
• Juwei Wu,
• Zheng Ma,
• Bo Li,
• Pengcheng Li,
• Xiaotao Zu and
• Xia Xiang

Beilstein J. Nanotechnol. 2019, 10, 2251–2260, doi:10.3762/bjnano.10.217

• solution A is mixed with solution B and stirred for 30 min. Subsequently, the mixture was transferred to a 50 mL Teflon-lined stainless steel autoclave and retained at 200 °C for 24 h. After cooling naturally, the product was washed with deionized water and absolute ethanol for several times and dried at

Ultrathin Ni_1−xCo_xS₂ nanoflakes as high energy density electrode materials for asymmetric supercapacitors

• Xiaoxiang Wang,
• Teng Wang,
• Rusen Zhou,
• Lijuan Fan,
• Shengli Zhang,
• Feng Yu,
• Tuquabo Tesfamichael,
• Liwei Su and
• Hongxia Wang

Beilstein J. Nanotechnol. 2019, 10, 2207–2216, doi:10.3762/bjnano.10.213

• nitrate hexahydrate and 40 mmol·L−1 2MI were first dissolved in absolute methanol, and then mixed to make a total volume of 60 mL solution. After stirring at 400 rpm for 10 to 15 min, the well-mixed solution was transferred into a 120 mL Teflon-lined stainless steel autoclave reactor. The reaction was

Improved adsorption and degradation performance by S-doping of (001)-TiO₂

• Xiao-Yu Sun,
• Xian Zhang,
• Xiao Sun,
• Ni-Xian Qian,
• Min Wang and
• Yong-Qing Ma

Beilstein J. Nanotechnol. 2019, 10, 2116–2127, doi:10.3762/bjnano.10.206

• %, Aladdin) was put in a Teflon-lined stainless steel autoclave. Then, 5 mL of deionized water and 5 mL of a HF acid solution (hydrofluoric acid, 40%, Aladdin) were added sequentially. The autoclave was maintained at 180 °C for 8 h and then cooled naturally to room temperature. The obtained precipitate was

Microbubbles decorated with dendronized magnetic nanoparticles for biomedical imaging: effective stabilization via fluorous interactions

• Da Shi,
• Justine Wallyn,
• Dinh-Vu Nguyen,
• Francis Perton,
• Delphine Felder-Flesch,
• Sylvie Bégin-Colin,
• Mounir Maaloum and
• Marie Pierre Krafft

Beilstein J. Nanotechnol. 2019, 10, 2103–2115, doi:10.3762/bjnano.10.205

• IONPs at the gas/liquid interface, the variation of the interfacial tension was acquired using a Tracker® tensiometer (Teclis, Civrieux d’Azergues, France). A 5 µL bubble was formed at the end of a steel capillary that had a tip diameter of 1 mm. The rising bubble was saturated with F-hexane by purging

Synthesis of highly active ETS-10-based titanosilicate for heterogeneously catalyzed transesterification of triglycerides

• Muhammad A. Zaheer,
• David Poppitz,
• Khavar Feyzullayeva,
• Marianne Wenzel,
• Jörg Matysik,
• Radomir Ljupkovic,
• Aleksandra Zarubica,
• Alexander A. Karavaev,
• Andreas Pöppl,
• Roger Gläser and
• Muslim Dvoyashkin

Beilstein J. Nanotechnol. 2019, 10, 2039–2061, doi:10.3762/bjnano.10.200

• stainless steel autoclave. The design of the autoclave is similar to a standard acid digestion vessel. The autoclave was then closed with a stainless steel screw-tightened cap. Both autoclaves were placed simultaneously into

Long-term entrapment and temperature-controlled-release of SF₆ gas in metal–organic frameworks (MOFs)

• Hana Bunzen,
• Andreas Kalytta-Mewes,
• Leo van Wüllen and
• Dirk Volkmer

Beilstein J. Nanotechnol. 2019, 10, 1851–1859, doi:10.3762/bjnano.10.180

• under vacuum at 320 °C overnight to remove any solvent molecules from the voids. SF6-loading experiments Analogous as described in [12], in each experiment, 50−100 mg of MFU-4 was placed in a steel vessel constructed from metal tubing attached to a manometer. The vessel was filled with SF6 gas and kept

Lipid nanostructures for antioxidant delivery: a comparative preformulation study

• Elisabetta Esposito,
• Maddalena Sguizzato,
• Markus Drechsler,
• Paolo Mariani,
• Federica Carducci,
• Claudio Nastruzzi,
• Giuseppe Valacchi and
• Rita Cortesi

Beilstein J. Nanotechnol. 2019, 10, 1789–1801, doi:10.3762/bjnano.10.174

• and RA content was analyzed after filtration by high-performance liquid chromatography (HPLC) using a Knauer Eurospher II RP C18 column (Knauer, Germany) (15 × 0.4 cm) stainless steel packed with 5 µm particles, eluted at room temperature with different mobile phases. Samples of 50 µL were injected

Synthesis of nickel/gallium nanoalloys using a dual-source approach in 1-alkyl-3-methylimidazole ionic liquids

• Ilka Simon,
• Julius Hornung,
• Juri Barthel,
• Jörg Thomas,
• Maik Finze,
• Roland A. Fischer and
• Christoph Janiak

Beilstein J. Nanotechnol. 2019, 10, 1754–1767, doi:10.3762/bjnano.10.171

• yields of 90% and selectivities of 94% and 87%, respectively. In this previous work 2 g of the alkyne substrate were mixed with 0.1 g of a 0.5 wt % NiGa@[BMIm][BF4] dispersion (containing 3.9 µmol NiGa) in a steel autoclave. Hydrogen was charged with 5 bar at 120 °C and the reaction was run for 3 h [30

• microwave decomposition (60 min, 50 W, 230 °C) to gain 0.5 wt % nanoparticles in ionic liquid. Catalytic hydrogenation of alkynes A Büchi stainless steel autoclave with a glass inlet was charged with 0.1 g of freshly synthesized NiGa@[BMIm][NTf2] dispersion (1 wt % in total metal, 8 µmol NiGa). 2 g of

Novel hollow titanium dioxide nanospheres with antimicrobial activity against resistant bacteria

• Carol López de Dicastillo,
• Cristian Patiño,
• María José Galotto,
• Yesseny Vásquez-Martínez,
• Claudia Torrent,
• Daniela Alburquenque,
• Alejandro Pereira and
• Juan Escrig

Beilstein J. Nanotechnol. 2019, 10, 1716–1725, doi:10.3762/bjnano.10.167

• temperature until the polymer was completely dissolved. The solution was transferred to 5 mL plastic syringes and connected through a PTFE tube to a 20-gauge blunt (0.9 mm diameter) stainless steel needle charged by a high voltage power supply in the range of 0–20 kV. The parameters were previously optimized

Growth of lithium hydride thin films from solutions: Towards solution atomic layer deposition of lithiated films

• Ivan Kundrata,
• Karol Fröhlich,
• Lubomír Vančo,
• Matej Mičušík and
• Julien Bachmann

Beilstein J. Nanotechnol. 2019, 10, 1443–1451, doi:10.3762/bjnano.10.142

• shown schematically in Figure 1, was loaded with sample substrates. To close the chamber, a glass slide (see below in Figure 2) was sealed to the chamber with PTFE grease. The solutions were introduced into the chamber with stainless steel threaded pipes, which were connected to threads in the PTFE body

Selective gas detection using Mn₃O₄/WO₃ composites as a sensing layer

• Yongjiao Sun,
• Zhichao Yu,
• Wenda Wang,
• Pengwei Li,
• Gang Li,
• Wendong Zhang,
• Lin Chen,
• Serge Zhuivkov and
• Jie Hu

Beilstein J. Nanotechnol. 2019, 10, 1423–1433, doi:10.3762/bjnano.10.140

• solution was poured into an 80 mL Teflon-lined stainless steel autoclave and maintained at 200 °C inside an oven. The bluish precipitate was obtained through washing, centrifugation and drying at 80 °C. Finally, after annealing at 500 °C in air for 2 h, the as-prepared blue precursor was converted to faint

Kelvin probe force microscopy of the nanoscale electrical surface potential barrier of metal/semiconductor interfaces in ambient atmosphere

• Petr Knotek,
• Tomáš Plecháček,
• Jan Smolík,
• Petr Kutálek,
• Filip Dvořák,
• Milan Vlček,
• Jiří Navrátil and
• Čestmír Drašar

Beilstein J. Nanotechnol. 2019, 10, 1401–1411, doi:10.3762/bjnano.10.138

• Coating System (Bio-Rad) in Ar atmosphere (p ≈ 20 Pa, I = 18 mA, U = 1.4 kV) from pure metal sheets (Mo 4N, Au 4N). For preparing separated Au nanoparticles under the same sputtering conditions, however, a stainless steel mask (system of 100 × 500 μm2 holes, 200 holes/cm2) between the substrate and target

Construction of a 0D/1D composite based on Au nanoparticles/CuBi₂O₄ microrods for efficient visible-light-driven photocatalytic activity

• Weilong Shi,
• Mingyang Li,
• Hongji Ren,
• Feng Guo,
• Xiliu Huang,
• Yu Shi and
• Yubin Tang

Beilstein J. Nanotechnol. 2019, 10, 1360–1367, doi:10.3762/bjnano.10.134

• dissolved in distilled water (70 mL) and constantly stirred for 3 h. Then, the mixed precursor was transferred into a 100 mL steel autoclave and heated for 24 h at 180 °C. The precipitate was washed with distilled water, and dried at 60 °C for 12 h to obtain the CBO microrods. Au nanoparticles were loaded

Glucose-derived carbon materials with tailored properties as electrocatalysts for the oxygen reduction reaction

• Rafael Gomes Morais,
• Natalia Rey-Raap,
• José Luís Figueiredo and
• Manuel Fernando Ribeiro Pereira

Beilstein J. Nanotechnol. 2019, 10, 1089–1102, doi:10.3762/bjnano.10.109

• prepared from an initial solution of glucose (HiMedia, >99%) and deionized water (produced by filtration through inverse osmose by a Panice device) in a 1:6 ratio. The solutions were mixed and then closed in a teflon-lined stainless steel autoclave and hydrothermally carbonized during 12 h at 180 °C. The

In situ AFM visualization of Li–O₂ battery discharge products during redox cycling in an atmospherically controlled sample cell

• Kumar Virwani,
• Younes Ansari,
• Khanh Nguyen,
• Francisco José Alía Moreno-Ortiz,
• Jangwoo Kim,
• Maxwell J. Giammona,
• Ho-Cheol Kim and
• Young-Hye La

Beilstein J. Nanotechnol. 2019, 10, 930–940, doi:10.3762/bjnano.10.94

• cell design The Li/O2 cell consisted of a polyetheretherketone (PEEK) cell body (Figure 1a) with a stainless steel (SS) stub (Figure 1b) that allowed electrical contact to glassy carbon cathode (Figure 1c) as shown in Figure 1. For AFM experiments, the design challenge was to allow the AFM tip contact

• of a donut-shaped polyethylene separator (Figure 1d) and lithium (Figure 1e) anode. The electrical contact to the lithium anode was made using stainless steel (Figure 1b). The entire assembly was performed inside of the glove box (<0.1 ppm H2O and O2), allowing the assembled cell to be free of

• ] using this in situ AFM set-up we monitored surface changes on the products of a Na–oxygen discharge reaction. The terms electrochemical cell and battery are used interchangeably in this study. Upon cell assembly, electrical connections were made between the lithium and carbon stainless steel contacts

Synthesis of novel C-doped g-C₃N₄ nanosheets coupled with CdIn₂S₄ for enhanced photocatalytic hydrogen evolution

• Jingshuai Chen,
• Chang-Jie Mao,
• Helin Niu and
• Ji-Ming Song

Beilstein J. Nanotechnol. 2019, 10, 912–921, doi:10.3762/bjnano.10.92

• 100 mL Teflon-lined stainless steel autoclave, sealed and maintained at 180 °C for 12 h, then cooled naturally and washed with ethanol and distilled water. The product was dried at 60 °C for 10 h. The as-prepared CdIn2S4/CCN samples with 1, 3, 5 and 10 wt % CdIn2S4 were denoted as CISCCN1, CISCCN3

An efficient electrode material for high performance solid-state hybrid supercapacitors based on a Cu/CuO/porous carbon nanofiber/TiO₂ hybrid composite

• Mamta Sham Lal,
• Thirugnanam Lavanya and
• Sundara Ramaprabhu

Beilstein J. Nanotechnol. 2019, 10, 781–793, doi:10.3762/bjnano.10.78

• PVA/H2SO4 polymer gel electrolyte and the fabrication of SSHSC is given in Supporting Information File 1. Then, the assembly was placed between two Perspex sheets, along with stainless-steel plates as current collectors. An optical image showing different parts of the fabricated supercapacitors is

An iridescent film of porous anodic aluminum oxide with alternatingly electrodeposited Cu and SiO₂ nanoparticles

• Menglei Chang,
• Huawen Hu,
• Haiyan Quan,
• Hongyang Wei,
• Zhangyi Xiong,
• Jiacong Lu,
• Pin Luo,
• Yaoheng Liang,
• Jianzhen Ou and
• Dongchu Chen

Beilstein J. Nanotechnol. 2019, 10, 735–745, doi:10.3762/bjnano.10.73

• stainless steel tube and a carbon fiber as the anode and cathode under the action of a circular electric field, respectively, resulting in a cylindrical fibrous structure. The control over the electrodeposition voltage and time allowed for the fabrication of fibers with different thicknesses, and the