Kelvin probe force microscopy of the nanoscale electrical surface potential barrier of metal/semiconductor interfaces in ambient atmosphere

• Petr Knotek,
• Tomáš Plecháček,
• Jan Smolík,
• Petr Kutálek,
• Filip Dvořák,
• Milan Vlček,
• Jiří Navrátil and
• Čestmír Drašar

Beilstein J. Nanotechnol. 2019, 10, 1401–1411, doi:10.3762/bjnano.10.138

• optimization of the efficiency of TE materials. Our efforts to prepare separated Mo NPs on the Bi2Se3 surface was not successful. Because Mo has significantly higher melting/boiling points (bulk Mo 2623/4639 °C, bulk Au 1064/2856 °C [47]) dc sputtering yielded homogeneous layers of Mo instead of separated NPs

Fabrication of phase masks from amorphous carbon thin films for electron-beam shaping

• Lukas Grünewald,
• Dagmar Gerthsen and
• Simon Hettler

Beilstein J. Nanotechnol. 2019, 10, 1290–1302, doi:10.3762/bjnano.10.128

• . Further optimization of the pattern included an increase of the dwell time for the central point by a factor of five to achieve a similar depth as in the rings. Additionally, an offset angle between each repetition was implemented because the beam is not blanked when it moves radially outward between the

On the relaxation time of interacting superparamagnetic nanoparticles and implications for magnetic fluid hyperthermia

• Andrei Kuncser,
• Nicusor Iacob and
• Victor E. Kuncser

Beilstein J. Nanotechnol. 2019, 10, 1280–1289, doi:10.3762/bjnano.10.127

• -transfer equation which is of key interest in the optimization of cancer therapy by magnetic hyperthermia therapy [19]. The second option may be effective in exploiting the theoretical models proposed for linking the experimental SAR dependencies to the physical mechanisms. From the theoretical point-of

Alloyed Pt₃M (M = Co, Ni) nanoparticles supported on S- and N-doped carbon nanotubes for the oxygen reduction reaction

• Stéphane Louisia,
• Yohann R. J. Thomas,
• Pierre Lecante,
• Marie Heitzmann,
• M. Rosa Axet,
• Pierre-André Jacques and
• Philippe Serp

Beilstein J. Nanotechnol. 2019, 10, 1251–1269, doi:10.3762/bjnano.10.125

• contains generally four times more catalyst than the anodic layer, which explains why most of the research is focused on the optimization of the cathodic catalytic layer. Platinum nanoparticles (NPs) supported on carbon black (CB), especially Vulcan XC-72 [3][4], are usually used as the catalyst. To meet

Electroluminescence and current–voltage measurements of single-(In,Ga)N/GaN-nanowire light-emitting diodes in a nanowire ensemble

• David van Treeck,
• Johannes Ledig,
• Gregor Scholz,
• Jonas Lähnemann,
• Mattia Musolino,
• Abbes Tahraoui,
• Oliver Brandt,
• Andreas Waag,
• Henning Riechert and
• Lutz Geelhaar

Beilstein J. Nanotechnol. 2019, 10, 1177–1187, doi:10.3762/bjnano.10.117

• occurs for single-NW and ensemble measurements, we could determine for the ensemble the fraction of active NWs emitting EL and the current density in them. We found a value of only 12% active NWs. This implies that there is still a large potential for the optimization of processing, which would lead to

Photoactive nanoarchitectures based on clays incorporating TiO₂ and ZnO nanoparticles

• Eduardo Ruiz-Hitzky,
• Pilar Aranda,
• Marwa Akkari,
• Nithima Khaorapapong and
• Makoto Ogawa

Beilstein J. Nanotechnol. 2019, 10, 1140–1156, doi:10.3762/bjnano.10.114

• more or less tunable photoactivity. Optimization and streamlining of synthetic processes must be achieved in order to tailor the physical and chemical characteristics of those materials. For instance, efforts have been made to combine TiO2 NPs with clays and clay minerals by a simple mixing to obtain a

Quantitative analysis of annealing-induced instabilities of photo-leakage current and negative-bias-illumination-stress in a-InGaZnO thin-film transistors

• Dapeng Wang and
• Mamoru Furuta

Beilstein J. Nanotechnol. 2019, 10, 1125–1130, doi:10.3762/bjnano.10.112

• properties and long-term stability. Therefore, many researches are devoted to reducing the density of defects during the fabrication, including the optimization of oxygen partial pressure [4], the increase of fabrication temperature, and the reduction of deposition power. In addition, post-annealing is

Synthesis and characterization of quaternary La(Sr)S–TaS₂ misfit-layered nanotubes

• Marco Serra,
• Erumpukuthickal Ashokkumar Anumol,
• Dalit Stolovas,
• Iddo Pinkas,
• Ernesto Joselevich,
• Reshef Tenne,
• Andrey Enyashin and
• Francis Leonard Deepak

Beilstein J. Nanotechnol. 2019, 10, 1112–1124, doi:10.3762/bjnano.10.111

• qualitative change in the chemical bonding between SrxLa1−xS and TaS2 parts of the lattice has been registered, while the MLC lattice was found to preserve its integrity after the geometry optimization. The intuitive charge transfer from the electron-rich LaS layer to the electrophilic TaS2 layer demonstrates

Revisiting semicontinuous silver films as surface-enhanced Raman spectroscopy substrates

• Malwina Liszewska,
• Bogusław Budner,
• Małgorzata Norek,
• Bartłomiej J. Jankiewicz and
• Piotr Nyga

Beilstein J. Nanotechnol. 2019, 10, 1048–1055, doi:10.3762/bjnano.10.105

• , reflectance decreases for wavelengths in the range of about one micrometer) without the need for expensive and time-consuming structural characterization. This could be used as a quick method for initial optimization of SSF thickness for high SERS signal. Calculation of the SERS enhancement factor of a SERS

Tailoring the stability/aggregation of one-dimensional TiO₂(B)/titanate nanowires using surfactants

• Atiđa Selmani,
• Johannes Lützenkirchen,
• Kristina Kučanda,
• Dario Dabić,
• Engelbert Redel,
• Ida Delač Marion,
• Damir Kralj,
• Darija Domazet Jurašin and
• Maja Dutour Sikirić

Beilstein J. Nanotechnol. 2019, 10, 1024–1037, doi:10.3762/bjnano.10.103

• surfactants adsorb onto the TNW surface. Moreover, the SCM in principle enables the prediction and optimization of surfactant adsorption on TNW surfaces, thus defining the conditions for stabilization or aggregation. The obtained results point to a simple way of controlling the TNW stability in dispersions

• . The experiments combined with the modelling approach yield insight into interactions in systems that are often found in the aquatic environment, thus enabling the prediction and the optimization of TNW interaction with surfactants for their successful application but also for their removal

Correlation of surface-enhanced Raman scattering (SERS) with the surface density of gold nanoparticles: evaluation of the critical number of SERS tags for a detectable signal

• Vincenzo Amendola

Beilstein J. Nanotechnol. 2019, 10, 1016–1023, doi:10.3762/bjnano.10.102

• , which can be obtained more easily with low-magnification optics when the surface density of the SERS tags is as low as a few units per micrometer square. These results contribute to the optimization of the experimental conditions for the use of SERS tags in analytical and biomedical analysis with high

Structural and optical properties of penicillamine-protected gold nanocluster fractions separated by sequential size-selective fractionation

• Xiupei Yang,
• Zhengli Yang,
• Fenglin Tang,
• Jing Xu,
• Maoxue Zhang and
• Martin M. F. Choi

Beilstein J. Nanotechnol. 2019, 10, 955–966, doi:10.3762/bjnano.10.96

• high precision, facilitating easy evaluation of structure–function relationships in their toxicological studies, as well as improving the repeatability in AuNC self-assembly. Further optimization of SSSP fractionation can result in fractionation of AuNCs to specific sizes at gram scales, which is

Comparing a porphyrin- and a coumarin-based dye adsorbed on NiO(001)

• Sara Freund,
• Antoine Hinaut,
• Nathalie Marinakis,
• Edwin C. Constable,
• Ernst Meyer,
• Catherine E. Housecroft and
• Thilo Glatzel

Beilstein J. Nanotechnol. 2019, 10, 874–881, doi:10.3762/bjnano.10.88

• technologies such as dye-sensitized solar cells. A key optimization parameter for such devices is the choice of the compounds in order to control the direction and the intensity of charge transfer across the interface. Here, the deposition of two different molecular dyes, porphyrin and coumarin, as single

Trapping polysulfide on two-dimensional molybdenum disulfide for Li–S batteries through phase selection with optimized binding

• Sha Dong,
• Xiaoli Sun and
• Zhiguo Wang

Beilstein J. Nanotechnol. 2019, 10, 774–780, doi:10.3762/bjnano.10.77

• × 1 k-grid for the geometry optimization. All atomic positions and cell parameters were relaxed until the force on each atom is less than 0.02 eV/Å. Cross-section and side views of (a) 2H-MoS2 and (b) 1T'-MoS2 monolayers. Orbital-decomposed band structures along high-symmetry points of (c) 2H-MoS2 and

Renewable energy conversion using nano- and microstructured materials

• Harry Mönig and
• Martina Schmid

Beilstein J. Nanotechnol. 2019, 10, 771–773, doi:10.3762/bjnano.10.76

• increasing the absorption or the area of a chemically reactive surface, a very established approach concerns bandgap engineering by varying the size and shape of nanoparticles, which enables, for instance, the optimization of the optoelectronic material properties to the solar spectrum [13]. Furthermore

• optimization. Due to the significantly increased surface-to-volume ratio of nanostructured materials, the development of interface passivation strategies is one of the major challenges in the case of photovoltaic devices where recombination losses are most harmful at the photoactive interfaces. To a large

Features and advantages of flexible silicon nanowires for SERS applications

• Hrvoje Gebavi,
• Vlatko Gašparić,
• Dubravko Risović,
• Nikola Baran,
• Paweł Henryk Albrycht and
• Mile Ivanda

Beilstein J. Nanotechnol. 2019, 10, 725–734, doi:10.3762/bjnano.10.72

• intensity on the VLS process temperature The first step in the synthesis optimization of the horizontally oriented SiNW substrates includes the determination of the optimal VLS synthesis temperature. The color of the substrates ranged from pale yellow to dark brown (Supporting Information File 1, Figure S1

Ultrathin hydrophobic films based on the metal organic framework UiO-66-COOH(Zr)

• Miguel A. Andrés,
• Clemence Sicard,
• Christian Serre,
• Olivier Roubeau and
• Ignacio Gascón

Beilstein J. Nanotechnol. 2019, 10, 654–665, doi:10.3762/bjnano.10.65

• Research University, 75005 Paris, France 10.3762/bjnano.10.65 Abstract This work reports on the fabrication, optimization and characterization of ultrathin films containing submicrometer particles (sMPs) of the hydrophilic and water stable UiO-66-COOH(Zr) metal organic framework (MOF). MOF particles of

• . Results and Discussion Optimization of MOF submicrometer particle Langmuir films: solvent mixtures and surfactants Spherical UiO-66-COOH(Zr) submicrometer particles (sMPs) of ≈200 nm diameter were synthesized and characterized (see Experimental section and Supporting Information File 1, Figure S1 for PXRD

• deposited onto Si(100) wafers was done using a high-resolution Empyrean diffractometer (PANalytical) operating at 45 kV (generator voltage) and a tube current of 40 mA (Cu Kα radiation). A Pixcell 1D medipix3 detector operating in the open detector mode was used. An optimization of the grazing incidence

Transport signatures of an Andreev molecule in a quantum dot–superconductor–quantum dot setup

• Zoltán Scherübl,
• András Pályi and
• Szabolcs Csonka

Beilstein J. Nanotechnol. 2019, 10, 363–378, doi:10.3762/bjnano.10.36

• associated negative differential conductance in the Cooper-pair splitter, and show that they can arise regardless of the nature of the dominant non-local coupling mechanism. Our results should facilitate the characterization of hybrid devices, and their optimization for various quantum-information-related

Intuitive human interface to a scanning tunnelling microscope: observation of parity oscillations for a single atomic chain

• Sumit Tewari,
• Jacob Bakermans,
• Christian Wagner,
• Federica Galli and
• Jan M. van Ruitenbeek

Beilstein J. Nanotechnol. 2019, 10, 337–348, doi:10.3762/bjnano.10.33

• , approximately 10−4 percent (see Figure S3 in Supporting Information File 1). Using these optimization methods, a speed-up of almost 10-fold in energy and force calculation is recorded by a standard profiling tool. A supporting program has also been developed to setup a simulation stage based on the STM images

Nitrous oxide as an effective AFM tip functionalization: a comparative study

• Taras Chutora,
• Bruno de la Torre,
• Pingo Mutombo,
• Jack Hellerstedt,
• Jaromír Kopeček,
• Pavel Jelínek and
• Martin Švec

Beilstein J. Nanotechnol. 2019, 10, 315–321, doi:10.3762/bjnano.10.30

• supercell, composed of three Au layers to represent the Au(111) surface. Both a single molecule and trimer clusters were initially placed on the surface according to experimental findings. The structural optimization of the slab was carried out, except for the two bottom Au layers, until the remaining

Uniform Sb₂S₃ optical coatings by chemical spray method

• Jako S. Eensalu,
• Atanas Katerski,
• Erki Kärber,
• Ilona Oja Acik,
• Arvo Mere and
• Malle Krunks

Beilstein J. Nanotechnol. 2019, 10, 198–210, doi:10.3762/bjnano.10.18

• ]. Improvements in photocurrent density have been sought by utilizing a transparent, nanostructured window layer instead of planar window layers with the ETA Sb2S3 absorber layer [4][7]. Previous studies show that achieving sufficient repeatability alongside optimization of the component layers, i.e., transparent

Nanoporous water oxidation electrodes with a low loading of laser-deposited Ru/C exhibit enhanced corrosion stability

• Sandra Haschke,
• Dmitrii Pankin,
• Vladimir Mikhailovskii,
• Maïssa K. S. Barr,
• Adriana Both-Engel,
• Alina Manshina and
• Julien Bachmann

Beilstein J. Nanotechnol. 2019, 10, 157–167, doi:10.3762/bjnano.10.15

• “nanotubular” in the rest of the paper). These novel metal/carbon nanostructures are characterized regarding their morphology and phase composition. Finally, the electrocatalytic water oxidation performance of planar and nanostructured Ru/C electrodes is studied at pH 4. The focus lies on (1) the optimization

• voltammetry (Figure S5, Supporting Information File 1) performed after long-term bulk electrolyses support this statement. Optimization of electrocatalytic performance Our preparative procedure now allows us to adjust the geometric parameters of the nanoporous substrate in order to optimize the catalytic

• is advantageous with respect to the state of the art in several regards (Table 1) [14][18][20][28][45][46][72]: Moderate current densities can be achieved at very low overpotential upon optimization of the nanoporous geometry. For example, pores of L = 13 μm deliver 2.6 mA cm−2 at η = 0.20 V. This

Electrolyte tuning in dye-sensitized solar cells with N-heterocyclic carbene (NHC) iron(II) sensitizers

• Mariia Karpacheva,
• Catherine E. Housecroft and
• Edwin C. Constable

Beilstein J. Nanotechnol. 2018, 9, 3069–3078, doi:10.3762/bjnano.9.285

• of solvent is crucial for optimization of DSC performance and long-term stability [45][46]. Our starting point was the standard electrolyte (E1, Table 1) that we employ for DSCs with bis(diimine)copper(I) sensitizers. This electrolyte contains the additive N-methylbenzimidazole (MBI) which is known

Femtosecond laser-assisted fabrication of chalcopyrite micro-concentrator photovoltaics

• Franziska Ringleb,
• Stefan Andree,
• Berit Heidmann,
• Jörn Bonse,
• Katharina Eylers,
• Owen Ernst,
• Torsten Boeck,
• Martina Schmid and
• Jörg Krüger

Beilstein J. Nanotechnol. 2018, 9, 3025–3038, doi:10.3762/bjnano.9.281

• of the islands. By optimizing the growth conditions, it was possible to determine parameters (ca. 500 °C substrate temperature and 0.3 Å/s deposition rate) at which suitable indium island (precursor) dimensions were achieved [17]. Figure 7 displays the result of the optimization process for an array

• element sequence was chosen for direct comparison, which however, does not correspond to an optimization for planar absorbers. The corresponding efficiencies of the planar references were 5.9% for CISe by nucleation, 8.5% for CIGSe by nucleation and 8.1% for CIGSe by LIFT. The efficiencies given were

Graphene-enhanced metal oxide gas sensors at room temperature: a review

• Dongjin Sun,
• Yifan Luo,
• Marc Debliquy and
• Chao Zhang

Beilstein J. Nanotechnol. 2018, 9, 2832–2844, doi:10.3762/bjnano.9.264

• room-temperature sensors, and further optimization is needed to control the drift. In another work, p–p junctions were accounted for the outstanding sensitivity to NO2 of Co3O4–rGO sensors at room temperature [60]. Liu et al. [61] prepared sulfonated reduced graphene oxide (S-rGO) via adding a solution

• sheets due to the introduction of TiO2 nanoparticles, the mellow and regular TiO2 nanoparticles also contributed to the improvement of the gas-sensing performance. However, the stability was poor because the composite sensor was sensitive to water molecules. Further optimization is needed to control the