Synthesis, characterization and in vitro biocompatibility study of Au/TMC/Fe₃O₄ nanocomposites as a promising, nontoxic system for biomedical applications

• Hanieh Shirazi,
• Maryam Daneshpour,
• Soheila Kashanian and
• Kobra Omidfar

Beilstein J. Nanotechnol. 2015, 6, 1677–1689, doi:10.3762/bjnano.6.170

• they are considered to be a link between atomic structures and bulk material [4]. Many of the physicochemical properties of materials change as their size approaches the nanoscale, which can be explained by their high surface area to volume ratio and the quantum confinement effect [4][5]. Over the last

The eNanoMapper database for nanomaterial safety information

• Nina Jeliazkova,
• Charalampos Chomenidis,
• Philip Doganis,
• Bengt Fadeel,
• Roland Grafström,
• Barry Hardy,
• Janna Hastings,
• Markus Hegi,
• Vedrin Jeliazkov,
• Nikolay Kochev,
• Pekka Kohonen,
• Cristian R. Munteanu,
• Haralambos Sarimveis,
• Bart Smeets,
• Pantelis Sopasakis,
• Georgia Tsiliki,
• David Vorgrimmler and
• Egon Willighagen

Beilstein J. Nanotechnol. 2015, 6, 1609–1634, doi:10.3762/bjnano.6.165

• , modes of action), interactions (cell lines, assays) and a wide variety of measurements. A number of analytic techniques have been proposed and developed to characterise the physicochemical properties of nanomaterials, including the commonly used dynamic light scattering to measure the particle size

• platform, running on a virtual machine using the VirtualBox software. The wiki contains physicochemical properties and toxicological data for more than three hundred nanomaterials: more than two hundred metal oxides, 80 carbon nanotubes, and a few metal and alloy particles. All nanomaterials originate from

• data dump [27] (in addition to the common MediaWiki XML and SQL dumps of the wiki content). ModNanoTox The ModNanoTox EU FP7 project (http://www.birmingham.ac.uk/generic/modnanotox/index.aspx) has produced a survey and selection of relevant physicochemical properties to use towards building a range of

Influence of surface chemical properties on the toxicity of engineered zinc oxide nanoparticles to embryonic zebrafish

• Zitao Zhou,
• Jino Son,
• Bryan Harper,
• Zheng Zhou and
• Stacey Harper

Beilstein J. Nanotechnol. 2015, 6, 1568–1579, doi:10.3762/bjnano.6.160

• with biological membranes may drive toxicity more than the size of the particle itself. NP agglomeration in aquatic environments often occurs and can be influenced by physicochemical properties of the particle surface and environmental factors affecting the zeta potential [27][45][46]. Therefore, it is

PLGA nanoparticles as a platform for vitamin D-based cancer therapy

• Maria J. Ramalho,
• Joana A. Loureiro,
• Bárbara Gomes,
• Manuela F. Frasco,
• Manuel A. N. Coelho and
• M. Carmo Pereira

Beilstein J. Nanotechnol. 2015, 6, 1306–1318, doi:10.3762/bjnano.6.135

• cell growth, cell cycle arrest and morphological changes. Results Nanoparticle physicochemical properties PLGA NPs were prepared by a single emulsion solvent evaporation method and stabilized with Pluronic®F127. The obtained results for mean the diameter, polydispersity index (PDI) and zeta potential

Synthesis, characterization and in vitro effects of 7 nm alloyed silver–gold nanoparticles

• Simon Ristig,
• Svitlana Chernousova,
• Wolfgang Meyer-Zaika and
• Matthias Epple

Beilstein J. Nanotechnol. 2015, 6, 1212–1220, doi:10.3762/bjnano.6.124

• scientific studies due to their distinct physicochemical properties [1][2]. Apart from their catalytic and optical features, in particular, silver and gold nanoparticles have begun to play a major role in biochemistry, biology and medicine [3][4][5]. Silver nanoparticles are known to be highly toxic towards

• nanoparticles are almost biologically inert (unless they are very small) [13] and therefore widely used in tumor therapy, for drug delivery, or in imaging applications [3][14][15]. In principle, alloyed nanoparticles of silver and gold can combine and utilize the physicochemical properties of both metals, for

• nanoparticles were characterized with respect to their physicochemical properties and their in vitro reaction. Results Nanoparticle characterization Alloyed Ag/Au nanoparticles were synthesized similar to the previously reported synthesis of alloyed Ag/Au 50:50 nanoparticles [30]; however, higher amounts of the

Effects of swift heavy ion irradiation on structural, optical and photocatalytic properties of ZnO–CuO nanocomposites prepared by carbothermal evaporation method

• Sini Kuriakose,
• D. K. Avasthi and
• Satyabrata Mohapatra

Beilstein J. Nanotechnol. 2015, 6, 928–937, doi:10.3762/bjnano.6.96

• ], biosensors [22] and photocatalysts [23][24][25]. Nanocomposites consisting of nanostructures of ZnO and other metal-oxide semiconductors are being widely studied due to their improved physicochemical properties as compared to the individual counterparts. CuO, a p-type narrow band gap semiconductor, is

• promising for applications ranging from solar cells to lithium-ion batteries [26][27][28][29]. ZnO–CuO nanocomposites formed by combining ZnO and CuO nanostructures are expected to exhibit improved physicochemical properties as compared to pure ZnO and CuO nanostructures, because of the formation of nano

• thin films. Swift heavy ion (SHI) irradiation using high electronic excitation is one of the promising techniques used to controllably engineer the size, shape, crystallinity and hence the physicochemical properties of nanostructured materials and nanocomposites. Energetic ions moving in a solid lose

Protein corona – from molecular adsorption to physiological complexity

• Lennart Treuel,
• Dominic Docter,
• Michael Maskos and
• Roland H. Stauber

Beilstein J. Nanotechnol. 2015, 6, 857–873, doi:10.3762/bjnano.6.88

• confirm the previously suggested [22][43][160][161] trivial link between the binding profiles on the NPs and the relative protein concentrations in the plasma. The dynamics of corona formation and composition The physicochemical properties of the protein corona and its evolution with time have been shown

Overview about the localization of nanoparticles in tissue and cellular context by different imaging techniques

• Anja Ostrowski,
• Daniel Nordmeyer,
• Alexander Boreham,
• Cornelia Holzhausen,
• Lars Mundhenk,
• Christina Graf,
• Martina C. Meinke,
• Annika Vogt,
• Sabrina Hadam,
• Jürgen Lademann,
• Eckart Rühl,
• Ulrike Alexiev and
• Achim D. Gruber

Beilstein J. Nanotechnol. 2015, 6, 263–280, doi:10.3762/bjnano.6.25

• to be considered when predicting the altered physicochemical properties of the labeled NP, including its charge, size, molecular weight, and overall structure [35]. For example, integrating indocarbocyanine-3 with a molecular weight of 767 Da into nanoscaled macromolecules such as dPGS with a

• molecular weight of 1,300 Da [56] can be expected to drastically alter its physicochemical properties [56]. Consequently, if fluorochromes are integrated into the shell or bound to the surface of a NP, the properties of the new structure are hard to predict and may even alter its behavior in cells and

Caveolin-1 and CDC42 mediated endocytosis of silica-coated iron oxide nanoparticles in HeLa cells

• Nils Bohmer and
• Andreas Jordan

Beilstein J. Nanotechnol. 2015, 6, 167–176, doi:10.3762/bjnano.6.16

• ). These modifications resulted in different physicochemical properties referring to SPIONs surface charge and their size distribution under physiological conditions (Table 1). The primary particle size was determined by transmission electron microscopy (EM906, Zeiss). The zeta potential and the average

• [37] and mesoporous silica particles [40] exclusively through Clathrin mediated endocytosis and/or macropinocytosis. This discrepancy can be explained by the different physicochemical properties of the particles used. Especially in the field of iron-oxide nanoparticles more studies concerning the

Synthesis of boron nitride nanotubes and their applications

• Saban Kalay,
• Zehra Yilmaz,
• Ozlem Sen,
• Melis Emanet,
• Emine Kazanc and
• Mustafa Çulha

Beilstein J. Nanotechnol. 2015, 6, 84–102, doi:10.3762/bjnano.6.9

• applications due to their unique physicochemical properties including high hydrophobicity, heat and electrical insulation, resistance to oxidation, and hydrogen storage capacity. They are also valued for their possible medical and biomedical applications including drug delivery, use in biomaterials, and

• possible to produce large quantities with high purity and uniformity. Since their physicochemical properties are independent of chirality, a simple synthesis method can be suitable, in contrast to CNTs. However, the choice of boron and nitrogen precursor catalysts can be important factors for their

The fate of a designed protein corona on nanoparticles in vitro and in vivo

• Denise Bargheer,
• Julius Nielsen,
• Gabriella Gébel,
• Markus Heine,
• Sunhild C. Salmen,
• Roland Stauber,
• Horst Weller,
• Joerg Heeren and
• Peter Nielsen

Beilstein J. Nanotechnol. 2015, 6, 36–46, doi:10.3762/bjnano.6.5

• . In order to make full use of their potential it is essential to understand what controls at the molecular level recognition by cells, cell entering and intracellular processing. Physicochemical properties of NPs such as material composition, size, shape, charge, and surface chemistry, have been

Functionalized polystyrene nanoparticles as a platform for studying bio–nano interactions

• Cornelia Loos,
• Tatiana Syrovets,
• Anna Musyanovych,
• Volker Mailänder,
• Katharina Landfester,
• G. Ulrich Nienhaus and
• Thomas Simmet

Beilstein J. Nanotechnol. 2014, 5, 2403–2412, doi:10.3762/bjnano.5.250

• safety profile by decreased undesirable side effects, because the latter are dose-dependent in about 95% [22]. Nanoparticle safety The special physicochemical properties of nanoparticles gave rise to concerns about health effects, which cannot be predicted just by adopting the safety risks of the

Nanoparticle interactions with live cells: Quantitative fluorescence microscopy of nanoparticle size effects

• Li Shang,
• Karin Nienhaus,
• Xiue Jiang,
• Linxiao Yang,
• Katharina Landfester,
• Volker Mailänder,
• Thomas Simmet and
• G. Ulrich Nienhaus

Beilstein J. Nanotechnol. 2014, 5, 2388–2397, doi:10.3762/bjnano.5.248

• (RBCs) can internalize NPs only via passive transport [12]. The efficiency of NP internalization by a cell depends on cell-specific parameters such as cell type or cell cycle phase [13][14] and physicochemical properties of the NP [15]. Notably, NPs with positive surface charge are typically

Interaction of dermatologically relevant nanoparticles with skin cells and skin

• Annika Vogt,
• Fiorenza Rancan,
• Sebastian Ahlberg,
• Berouz Nazemi,
• Chun Sik Choe,
• Maxim E. Darvin,
• Sabrina Hadam,
• Ulrike Blume-Peytavi,
• Kateryna Loza,
• Jörg Diendorf,
• Matthias Epple,
• Christina Graf,
• Eckart Rühl,
• Martina C. Meinke and
• Jürgen Lademann

Beilstein J. Nanotechnol. 2014, 5, 2363–2373, doi:10.3762/bjnano.5.245

• ., unintended environmental exposure (silica) versus intended exposure through application of sunscreen (titanium dioxide) or antiseptics (silver). Because each particle type exhibits specific physicochemical properties, we were able to apply different combinations of methods to examine skin penetration and

Inorganic Janus particles for biomedical applications

• Isabel Schick,
• Steffen Lorenz,
• Dominik Gehrig,
• Stefan Tenzer,
• Wiebke Storck,
• Karl Fischer,
• Dennis Strand,
• Frédéric Laquai and
• Wolfgang Tremel

Beilstein J. Nanotechnol. 2014, 5, 2346–2362, doi:10.3762/bjnano.5.244

• exploration of their physicochemical properties and large scale applications in the near future. Illustrations of the transition from isotropic to anisotropic particles. a) Evolution of the PL-peak position, b) schematic representation, and c) evolution of the PL-quantum yield for several core-shell quantum

Localized surface plasmon resonances in nanostructures to enhance nonlinear vibrational spectroscopies: towards an astonishing molecular sensitivity

• Dan Lis and
• Francesca Cecchet

Beilstein J. Nanotechnol. 2014, 5, 2275–2292, doi:10.3762/bjnano.5.237

Nanoencapsulation of ultra-small superparamagnetic particles of iron oxide into human serum albumin nanoparticles

• Matthias G. Wacker,
• Mahmut Altinok,
• Stephan Urfels and
• Johann Bauer

Beilstein J. Nanotechnol. 2014, 5, 2259–2266, doi:10.3762/bjnano.5.235

• , and 30 µg/mg were freeze dried in presence of mannitol at a concentration of 3% (w/v) and tested after 1 day and 2 weeks with regards to their physicochemical properties after resuspension in water (Figure 6). All particle preparations stored under cool conditions remained stable over the evaluated

Influence of stabilising agents and pH on the size of SnO₂ nanoparticles

• Olga Rac,
• Patrycja Suchorska-Woźniak,
• Marta Fiedot and
• Helena Teterycz

Beilstein J. Nanotechnol. 2014, 5, 2192–2201, doi:10.3762/bjnano.5.228

• most widely studied and employed owing to its physicochemical properties. It features a high physicochemical stability and its electrical conductance changes predictably under the influence of various gases, which is the basis for operation of resistive gas sensors [5]. Despite the enormous number of

PVP-coated, negatively charged silver nanoparticles: A multi-center study of their physicochemical characteristics, cell culture and in vivo experiments

• Sebastian Ahlberg,
• Alexandra Antonopulos,
• Jörg Diendorf,
• Ralf Dringen,
• Matthias Epple,
• Rebekka Flöck,
• Wolfgang Goedecke,
• Christina Graf,
• Nadine Haberl,
• Jens Helmlinger,
• Fabian Herzog,
• Frederike Heuer,
• Stephanie Hirn,
• Christian Johannes,
• Stefanie Kittler,
• Manfred Köller,
• Katrin Korn,
• Wolfgang G. Kreyling,
• Fritz Krombach,
• Jürgen Lademann,
• Kateryna Loza,
• Eva M. Luther,
• Marcelina Malissek,
• Martina C. Meinke,
• Daniel Nordmeyer,
• Anne Pailliart,
• Jörg Raabe,
• Fiorenza Rancan,
• Barbara Rothen-Rutishauser,
• Eckart Rühl,
• Carsten Schleh,
• Andreas Seibel,
• Christina Sengstock,
• Lennart Treuel,
• Annika Vogt,
• Katrin Weber and
• Reinhard Zellner

Beilstein J. Nanotechnol. 2014, 5, 1944–1965, doi:10.3762/bjnano.5.205

• main text. 10.3762/bjnano.5.205 Abstract PVP-capped silver nanoparticles with a diameter of the metallic core of 70 nm, a hydrodynamic diameter of 120 nm and a zeta potential of −20 mV were prepared and investigated with regard to their biological activity. This review summarizes the physicochemical

• properties (dissolution, protein adsorption, dispersability) of these nanoparticles and the cellular consequences of the exposure of a broad range of biological test systems to this defined type of silver nanoparticles. Silver nanoparticles dissolve in water in the presence of oxygen. In addition, in

In vitro and in vivo interactions of selected nanoparticles with rodent serum proteins and their consequences in biokinetics

• Wolfgang G. Kreyling,
• Stefanie Fertsch-Gapp,
• Martin Schäffler,
• Blair D. Johnston,
• Nadine Haberl,
• Christian Pfeiffer,
• Jörg Diendorf,
• Carsten Schleh,
• Stephanie Hirn,
• Manuela Semmler-Behnke,
• Matthias Epple and
• Wolfgang J. Parak

Beilstein J. Nanotechnol. 2014, 5, 1699–1711, doi:10.3762/bjnano.5.180

• responses in tissues and cells cannot be neglected a priori but require thorough investigations. Therefore, we studied the interactions and protein binding kinetics of blood serum proteins with a number of engineered NP as a function of their physicochemical properties. Here we show by in vitro incubation

• spheres (AuNP), surface-modified with the same ionic ligand; as well as 5 nm AuNP with five different surface modifications on the binding to serum proteins by using proteomics analyses. We found that the binding of numerous serum proteins depended strongly on the physicochemical properties of the AuNP

• . These in vitro results helped us substantially in the interpretation of our numerous in vivo biokinetics studies performed in rodents using the same NP. These had shown that not only the physicochemical properties determined the AuNP translocation from the organ of intake towards blood circulation and

In vitro interaction of colloidal nanoparticles with mammalian cells: What have we learned thus far?

• Moritz Nazarenus,
• Qian Zhang,
• Mahmoud G. Soliman,
• Pablo del Pino,
• Beatriz Pelaz,
• Susana Carregal-Romero,
• Joanna Rejman,
• Barbara Rothen-Rutishauser,
• Martin J. D. Clift,
• Reinhard Zellner,
• G. Ulrich Nienhaus,
• James B. Delehanty,
• Igor L. Medintz and
• Wolfgang J. Parak

Beilstein J. Nanotechnol. 2014, 5, 1477–1490, doi:10.3762/bjnano.5.161

• penetration, which need to be considered in in vivo experiments, can be neglected. The kinetics of internalization can depend strongly on the physicochemical properties of the NPs, the type of cells, and other parameters. Cellular uptake studies of NPs require as much characterization of the NP materials as

• physicochemical properties of the NPs can be found. One, however, has to be aware that many physicochemical properties of NPs, such as size, shape, charge, and colloidal stability are highly entangled [14]. The physicochemical properties are not intrinsically associated with the NPs, but result from the

• consider for all correlations between the NP–cell interactions and the physicochemical properties of the NPs. Reports, in which no characterization of colloidal properties has been performed, therefore have to be regarded very critically. Unfortunately, many NPs are not colloidally stable in cell culture

Nanoporous composites prepared by a combination of SBA-15 with Mg–Al mixed oxides. Water vapor sorption properties

• Amaury Pérez-Verdejo,
• Alvaro Sampieri,
• Heriberto Pfeiffer,
• Mayra Ruiz-Reyes,
• Juana-Deisy Santamaría and
• Geolar Fetter

Beilstein J. Nanotechnol. 2014, 5, 1226–1234, doi:10.3762/bjnano.5.136

• hydrophobic–hydrophilic character, among other physicochemical properties. The most studied multifunctional materials are the hybrids, which are good candidates for biomedical applications, e.g., biosensors, artificial bonds and bioadsorbents [4][5]. Instead, a few works report the design of purely inorganic

• candidates to be combined homogenously with mesoporous siliceous materials to improve their physicochemical properties. Hydrotalcites are lamellar materials with basic properties, but with a relative low surface area and poor mesoporosity [12]. Thus, large molecules accessibility toward active sites is a

Functionalized nanostructures for enhanced photocatalytic performance under solar light

• Liejin Guo,
• Dengwei Jing,
• Maochang Liu,
• Yubin Chen,
• Shaohua Shen,
• Jinwen Shi and
• Kai Zhang

Beilstein J. Nanotechnol. 2014, 5, 994–1004, doi:10.3762/bjnano.5.113

• have been reported to be effective to enhance photocatalytic H2 evolution on CdS [25]. Low-cost WC was also used as efficient cocatalyst on CdS because of its low overpotential for hydrogen production and proper physicochemical properties [26]. The Xu group has studied the effect of NiS working as a

Controlling mechanical properties of bio-inspired hydrogels by modulating nano-scale, inter-polymeric junctions

• Seonki Hong,
• Hyukjin Lee and
• Haeshin Lee

Beilstein J. Nanotechnol. 2014, 5, 887–894, doi:10.3762/bjnano.5.101

• ). This result strongly suggests that one can control physicochemical properties of a wide variety of PEG-containing biomaterials by designing effective conjugation chemistry. We chose PEG hydrogels as an example. Effect of the amine group in PEG gelation I: mechanical properties of hydrogels To explore

• importance of catecholamine quinone tanning. Thus, the results demonstrated herein can be a useful toolkit to further control physicochemical properties of biomaterials. Conclusion In summary, we demonstrated that the particular quinone tanning process simultaneously involved with catechol and amine was

Nanostructure sensitization of transition metal oxides for visible-light photocatalysis

• Hongjun Chen and
• Lianzhou Wang

Beilstein J. Nanotechnol. 2014, 5, 696–710, doi:10.3762/bjnano.5.82

• research area of photocatalysis has attracted increasing attention. Compared with bulk materials, nanomaterials often exhibit unusual features such as large surface areas, diverse morphologies and size-dependent physicochemical properties. Size-dependent properties include an increased absorption

• solution for the photosensitizers to anchor. The hybridization of exfoliated nanosheets with nanosized photosensitizers often shows a tunable electronic structure and new physicochemical properties. All these features attribute to a promising future of nanostructure sensitization in the ion-exchangeable