Clays enhanced with niobium: potential in wastewater treatment and reuse as pigment with antibacterial activity

• Silvia Jaerger,
• Patricia Appelt,
• Mario Antônio Alves da Cunha,
• Fabián Ccahuana Ayma,
• Ricardo Schneider,
• Carla Bittencourt and
• Fauze Jacó Anaissi

Beilstein J. Nanotechnol. 2025, 16, 141–154, doi:10.3762/bjnano.16.13

• /bjnano.16.13 Abstract Bentonite clay sourced from the Guarapuava region, Brazil, was modified with niobium oxide (BEOx) and niobium phosphate (BEPh) to act as an adsorbent and photocatalyst in the remediation of wastewater containing methylene blue (MB) dye. Additionally, colored materials were evaluated

• for their potential as antibacterial hybrid pigments. The bentonite clay modified with niobium was prepared by a solution containing swelling clay mixed with niobium oxide (NbOx) and niobium phosphate (NbPh) in a water solution; after that, the suspension was calcinated. X-ray diffractometry, X-ray

• photoelectron spectroscopy, and laser-induced breakdown spectroscopy assessed the modifications induced by the incorporation of niobium compounds into the clay, confirming the presence of niobium in the bentonite clay. Following characterization, the BEOx and BEPh samples were used as adsorbents or

Photoactive nanoarchitectures based on clays incorporating TiO₂ and ZnO nanoparticles

• Eduardo Ruiz-Hitzky,
• Pilar Aranda,
• Marwa Akkari,
• Nithima Khaorapapong and
• Makoto Ogawa

Beilstein J. Nanotechnol. 2019, 10, 1140–1156, doi:10.3762/bjnano.10.114

• , when exposed to UV light [117]. Other alternative approaches include the direct precipitation of the ZnO from Zn salts in presence of bentonite dispersed in ethanol [124] or the association of ZnO NPs with Laponite® using poly(vinyl alcohol) as binder agent [125]. In both cases, the resulting materials

• 2.25 eV, corresponding to a light wavelength of 550 nm suitable for a photocatalyst responsive to visible light was reported. The co-doping of N and S [149] and Cu, Ag, and Fe on TiO2@bentonite has also been reported [150]. Other authors also reported the modification of the photoactivity

Photocatalytic and adsorption properties of TiO₂-pillared montmorillonite obtained by hydrothermally activated intercalation of titanium polyhydroxo complexes

• Mikhail F. Butman,
• Nikolay L. Ovchinnikov,
• Nikita S. Karasev,
• Nataliya E. Kochkina,
• Alexander V. Agafonov and
• Alexandr V. Vinogradov

Beilstein J. Nanotechnol. 2018, 9, 364–378, doi:10.3762/bjnano.9.36

• size of <2 micrometers, which was isolated by the sedimentation method from natural bentonite of the Dash-Salakhly deposit [56], was used as a starting material. The extracted MM fraction was subjected to drying at a temperature of 60 °C. Original MM (Figure 13) has a characteristic layered structure

Green synthesis, characterization and catalytic activity of natural bentonite-supported copper nanoparticles for the solvent-free synthesis of 1-substituted 1H-1,2,3,4-tetrazoles and reduction of 4-nitrophenol

• Akbar Rostami-Vartooni,
• Mohammad Alizadeh and
• Mojtaba Bagherzadeh

Beilstein J. Nanotechnol. 2015, 6, 2300–2309, doi:10.3762/bjnano.6.236

• the surface of natural bentonite using Thymus vulgaris extract as a reducing and stabilizing agent. The natural bentonite-supported copper nanoparticles (Cu NPs/bentonite) were characterized by FTIR spectroscopy, X-ray diffraction (XRD), X-ray fluorescence (XRF), field emission scanning electron

• -substituted 1H-1,2,3,4-tetrazoles and reduction of 4-nitrophenol (4-NP) in water. It was found that the Cu NPs/bentonite is a highly active and recyclable catalyst for related reactions. Keywords: heterogeneous catalyst; modified bentonite; nanocomposite; 1-substituted 1H-1,2,3,4-tetrazoles; Introduction

• distributed and stable metal NPs. In recent decades, the use of natural bentonites has been studied due to their high specific surface area, low cost, ordered structure, thermal stability, high safety, high exchange capacity and intercalation abilities [8]. Smectites are major clay minerals in bentonite with

Self-assembled anchor layers/polysaccharide coatings on titanium surfaces: a study of functionalization and stability

• Ognen Pop-Georgievski,
• Dana Kubies,
• Josef Zemek,
• Neda Neykova,
• Roman Demianchuk,
• Eliška Mázl Chánová,
• Miroslav Šlouf,
• Milan Houska and
• František Rypáček

Beilstein J. Nanotechnol. 2015, 6, 617–631, doi:10.3762/bjnano.6.63

• ] and phosphonic acids adsorbed on bentonite [49], the 2000–800 cm−1 region in our IR spectrum of sodium neridronate powder was characterized by different stretching (ν) and bending (δ) modes of P=O, P–O(H) and P–O– units of sodium phosphonate and free phosphonic acid. The initially observed spectrum of

Twofold role of calcined hydrotalcites in the degradation of methyl parathion pesticide

• Alvaro Sampieri,
• Geolar Fetter,
• María Elena Villafuerte-Castrejon,
• Adriana Tejeda-Cruz and
• Pedro Bosch

Beilstein J. Nanotechnol. 2011, 2, 99–103, doi:10.3762/bjnano.2.11

• sorbed on a bentonite (cationic clay) [6][7][8]. Moreover, the bentonite sorption capacity may be increased if the clay is exchanged with cetyltrimethylammonium bromide (CTAB). Indeed, the hydrophobic character of the pesticide and the organoclay enhances the retention through two mechanisms; either MP