A low-kiloelectronvolt focused ion beam strategy for processing low-thermal-conductance materials with nanoampere currents

• Annalena Wolff,
• Nico Klingner,
• William Thompson,
• Yinghong Zhou,
• Jinying Lin and
• Yin Xiao

Beilstein J. Nanotechnol. 2024, 15, 1197–1207, doi:10.3762/bjnano.15.97

• heating effects that lead to noticeable changes in nanostructure deposition geometry during FEBID processes have recently been published [19]. These approaches, a thorough understanding of the parameters that govern the beam-induced heat damage as well as open source software, would also be beneficial for

Nanoporous water oxidation electrodes with a low loading of laser-deposited Ru/C exhibit enhanced corrosion stability

• Sandra Haschke,
• Dmitrii Pankin,
• Vladimir Mikhailovskii,
• Maïssa K. S. Barr,
• Adriana Both-Engel,
• Alina Manshina and
• Julien Bachmann

Beilstein J. Nanotechnol. 2019, 10, 157–167, doi:10.3762/bjnano.10.15

• line). Regions of predominant thermodynamic stability and dissolution of the solid in water oxidation conditions are color-coded in green and red, respectively. Photographs and schematic drawings of laser-induced chemical liquid deposition geometry on planar (a,b) and nanostructured samples (c,d) from

Influence of the thickness of an antiferromagnetic IrMn layer on the static and dynamic magnetization of weakly coupled CoFeB/IrMn/CoFeB trilayers

• Deepika Jhajhria,
• Dinesh K. Pandya and
• Sujeet Chaudhary

Beilstein J. Nanotechnol. 2018, 9, 2198–2208, doi:10.3762/bjnano.9.206

• to the oblique deposition geometry [39]. Since CoFeB is highly sensitive to this induced anisotropic stress (owing to their large positive saturation magnetostriction coefficient λs [40]), the deposition geometry effectively results in the observed UMA [41]. The UMA in films is found to be directly

Comparative study of sculptured metallic thin films deposited by oblique angle deposition at different temperatures

• Susann Liedtke,
• Christoph Grüner,
• Jürgen W. Gerlach and
• Bernd Rauschenbach

Beilstein J. Nanotechnol. 2018, 9, 954–962, doi:10.3762/bjnano.9.89

• deposition geometry on thermally oxidized Si substrates. During deposition the sample holder is cooled down to 77 K. It is observed that all obliquely deposited metals grow as tilted, high aspect ratio columns and hence with a similar morphology. A comparison of such columns with those deposited at room

• deposition geometry, those nuclei create a shadowed region, where the other incoming particles cannot condense. Ballistic shadowing forces the growing nuclei to develop in separated, tilted columns oriented towards the particle source. However, metal atoms show already at room temperature an enlarged surface

• oblique deposition geometry. Thereby, the effective area of the substrate is reduced by a factor of cos θ from the perspective of the incoming atoms. So, only a fraction of the incoming atoms will condense on the substrate, which results in a lower film thickness tθ>0° compared to the vertically deposited

Au nanostructure fabrication by pulsed laser deposition in open air: Influence of the deposition geometry

• Rumen G. Nikov,
• Anna Og. Dikovska,
• Nikolay N. Nedyalkov,
• Georgi V. Avdeev and
• Petar A. Atanasov

Beilstein J. Nanotechnol. 2017, 8, 2438–2445, doi:10.3762/bjnano.8.242

• nanoparticles and nanoaggregates produced in the ablated plasma at atmospheric pressure led to the formation of chain-like nanostructures on the substrate. The dependence of the surface morphology of the samples on the deposition geometry used in the experimental set up was studied. Nanocolumns of different

• and realization in ambient conditions presented in this work more ideal for industrial applications. Keywords: Au nanostructures; deposition geometry; nanocolumns; open-air PLD; physical properties; Introduction The growing interest in nanomaterials is related to their unique and fascinating

• in the field, the influence of the deposition geometry of PLD in open air on the surface morphology of the structures produced has yet to be thoroughly studied. The nanostructures produced by laser deposition in air are still being investigated to establish their physical properties and possibilities