Tailoring of physical properties of RF-sputtered ZnTe films: role of substrate temperature

• Kafi Devi,
• Usha Rani,
• Arun Kumar,
• Divya Gupta and
• Sanjeev Aggarwal

Beilstein J. Nanotechnol. 2025, 16, 333–348, doi:10.3762/bjnano.16.25

• –target distance, substrate temperature, and pressure during deposition inside the chamber can be varied. These process parameters have a remarkable impact on the structural, optical, and electrical properties of the grown films. Further, films with uniform thickness can be grown using this technique

• . Bellakhder et al. [13] have investigated the impact of varying RF power on the structure, optical, and electrical properties of RF-sputtered ZnTe films and found that the deposited films are highly resistive and have low refractive index because of the polycrystalline nature of films. Isik et al. [14

• ] carried out studies on the structure and temperature-dependent optical properties of magnetron-sputtered ZnTe films. Bacaksiz et al. [15] reported the effect of substrate temperature (−123 and 27 °C) on structural, morphological, optical, and electrical properties of ZnTe films deposited by evaporation

Emerging strategies in the sustainable removal of antibiotics using semiconductor-based photocatalysts

• Yunus Ahmed,
• Keya Rani Dutta,
• Parul Akhtar,
• Md. Arif Hossen,
• Md. Jahangir Alam,
• Obaid A. Alharbi,
• Hamad AlMohamadi and
• Abdul Wahab Mohammad

Beilstein J. Nanotechnol. 2025, 16, 264–285, doi:10.3762/bjnano.16.21

• electron–hole pairs and powerful redox capability. Higher photoactivity was also observed for other heterostructures such as NiFe2O4/Bi2O3 [87], Fe3O4@Bi2O3–RGO [88], Bi2O3/(BiO)2CO3 [89]. Bismuth oxyhalides (BiOX) are renowned as photocatalysts because of their distinctive optical and electrical

• properties, distinguishing them from other promising materials. The distinctive layered structure of BiOX (X = Cl, Br, and I) facilitates efficient separation of charge carriers, resulting in exceptional photocatalytic performance [85]. BiOX includes [Bi2O2]2+ slabs surrounded by double slabs of [X]−. The

Modeling and simulation of carbon-nanocomposite-based gas sensors

• Roopa Hegde,
• Punya Prabha V,
• Shipra Upadhyay and
• Krishna S B

Beilstein J. Nanotechnol. 2025, 16, 90–96, doi:10.3762/bjnano.16.9

• with changes in CO concentration. Surface coverage in the nanocomposite is governed by the adsorption of gas molecules. When CO molecules come in contact, they react with these adsorbed oxygen ions, which releases electrons into the material and alters its electrical properties. Results and Discussion

Advanced atomic force microscopy techniques V

• Philipp Rahe,
• Ilko Bald,
• Nadine Hauptmann,
• Regina Hoffmann-Vogel,
• Harry Mönig and
• Michael Reichling

Beilstein J. Nanotechnol. 2025, 16, 54–56, doi:10.3762/bjnano.16.6

• challenge in precision measurements of local electrical parameters lies on possible contributions of environmental factors as well as on unknown electrical properties of the scanning tip. The work by Piquemal et al. tackles these challenges by introducing a reference sample suitable for calibrating the

Heterogeneous reactions in a HFCVD reactor: simulation using a 2D model

• Xochitl Aleyda Morán Martínez,
• José Alberto Luna López,
• Zaira Jocelyn Hernández Simón,
• Gabriel Omar Mendoza Conde,
• José Álvaro David Hernández de Luz and
• Godofredo García Salgado

Beilstein J. Nanotechnol. 2024, 15, 1627–1638, doi:10.3762/bjnano.15.128

• process and the properties of the films, with the most important parameters being substrate temperature, gas pressure, species concentration, and flow velocity [1]. The structural, optical, and electrical properties of the SiOx, more generally known as silicon-rich oxide (SRO), films are determined by the

• ratio x = [O]/[Si], which is determined by controlling key parameters in the deposition process [2]. This ratio determines optical and electrical properties such as bandgap energy, absorption coefficient, photoluminescence, refractive index, and electrical conductivity [3]. SiOx cannot only be obtained

• because the input gases and materials are accessible; also, it is scalable to larger areas [6]. The SiOx films obtained by HFCVD possess excellent optical and electrical properties, which makes such films suitable for applications in the manufacture of metal–insulator–semiconductor and metal–insulator

Electrochemical nanostructured CuBTC/FeBTC MOF composite sensor for enrofloxacin detection

• Thi Kim Ngan Nguyen,
• Tien Dat Doan,
• Huy Hieu Luu,
• Hoang Anh Nguyen,
• Thi Thu Ha Vu,
• Quang Hai Tran,
• Ha Tran Nguyen,
• Thanh Binh Dang,
• Thi Hai Yen Pham and
• Mai Ha Hoang

Beilstein J. Nanotechnol. 2024, 15, 1522–1535, doi:10.3762/bjnano.15.120

• , respectively [31]. In addition, the coupling of MOFs with conducting polymers was investigated to modulate their electrical properties. Conducting poly(3,4-ethylenedioxythiophene) nanotubes were coated with porphyrin-based MOFs to detect dopamine in the range of 2 × 10−6 to 270 × 10−6 M with a LOD of 0.04 × 10

Integrating high-performance computing, machine learning, data management workflows, and infrastructures for multiscale simulations and nanomaterials technologies

• Fabio Le Piane,
• Mario Vozza,
• Matteo Baldoni and
• Francesco Mercuri

Beilstein J. Nanotechnol. 2024, 15, 1498–1521, doi:10.3762/bjnano.15.119

• performance of materials before they are synthesized [1][2][3]. This approach enables the discovery of materials with, for example, improved mechanical strength, enhanced thermal conductivity, superior electrical properties, or other tailored characteristics. Simulations provide crucial insights at different

Strain-induced bandgap engineering in 2D ψ-graphene materials: a first-principles study

• Kamal Kumar,
• Nora H. de Leeuw,
• Jost Adam and
• Abhishek Kumar Mishra

Beilstein J. Nanotechnol. 2024, 15, 1440–1452, doi:10.3762/bjnano.15.116

• ). We observed that the positive strain fails to open the bandgap in ψ-graphene (Table 2). To comprehensively analyze the impact of this positive strain on the electrical properties of ψ-graphene, we have also plotted the PDOSs and the EBSs of all the strained structures of ψ-graphene in Figure S2 and

• electrical properties (Supporting Information File 1, Figures S9 and S10) when ψ-graphone undergoes negative mechanical strain ranging from −1% to −16% in its lattice plane. ψ-Graphone maintains its semiconducting nature within this negative strain range, and random separation is found between the valence

Green synthesis of carbon dot structures from Rheum Ribes and Schottky diode fabrication

• Muhammed Taha Durmus and
• Ebru Bozkurt

Beilstein J. Nanotechnol. 2024, 15, 1369–1375, doi:10.3762/bjnano.15.110

• temperature (Figure 7). The interface between Au and CDs exhibited a nonlinear rectification behavior, indicating the formation of a Schottky diode [24]. The electrical properties of the Si/CDs/Au diode were determined using standard thermionic emission theory [25]. According to this theory, where n, IRs, V

Out-of-plane polarization induces a picosecond photoresponse in rhombohedral stacked bilayer WSe₂

• Guixian Liu,
• Yufan Wang,
• Zhoujuan Xu,
• Zhouxiaosong Zeng,
• Lanyu Huang,
• Cuihuan Ge and
• Xiao Wang

Beilstein J. Nanotechnol. 2024, 15, 1362–1368, doi:10.3762/bjnano.15.109

• ) at room temperature. The electrical properties of the devices were characterized using an Agilent B1500 semiconductor analyzer in a Lake Shore vacuum chamber (10−4 Pa). SPCM and TRPC measurement The photocurrent maps were all obtained under zero bias using a custom-built scanning photocurrent

New design of operational MEMS bridges for measurements of properties of FEBID-based nanostructures

• Bartosz Pruchnik,
• Krzysztof Kwoka,
• Ewelina Gacka,
• Dominik Badura,
• Piotr Kunicki,
• Andrzej Sierakowski,
• Paweł Janus,
• Tomasz Piasecki and
• Teodor Gotszalk

Beilstein J. Nanotechnol. 2024, 15, 1273–1282, doi:10.3762/bjnano.15.103

• actuation mechanism. This opens the possibility to perform both electrical and mechanical measurements of nanostructures, in particular, free-standing nanostructures, which are the most interesting for their mechanical and electrical properties combined in nanoscale phenomena [28][29][30]. The requirements

Photocatalytic methane oxidation over a TiO₂/SiNWs p–n junction catalyst at room temperature

• Qui Thanh Hoai Ta,
• Luan Minh Nguyen,
• Ngoc Hoi Nguyen,
• Phan Khanh Thinh Nguyen and
• Dai Hai Nguyen

Beilstein J. Nanotechnol. 2024, 15, 1132–1141, doi:10.3762/bjnano.15.92

• the photocatalyst under dark and light conditions. The current of the sample under light conditions is higher than that under dark conditions. The slope of the I–V characteristic starts to increase, showing that generated electrons strongly influence the electrical properties of the samples. The

Unveiling the potential of alginate-based nanomaterials in sensing technology and smart delivery applications

• Shakhzodjon Uzokboev,
• Khojimukhammad Akhmadbekov,
• Ra’no Nuritdinova,
• Salah M. Tawfik and
• Yong-Ill Lee

Beilstein J. Nanotechnol. 2024, 15, 1077–1104, doi:10.3762/bjnano.15.88

• . Also, alginate-based nanoparticles possess excellent mechanical and electrical properties, overcoming the limitations typically associated with biomaterials in sensing applications [73]. Drug delivery applications Alginate-based nanoparticles for smart DDSs Drug delivery systems are one of the areas in

Interface properties of nanostructured carbon-coated biological implants: an overview

• Mattia Bartoli,
• Francesca Cardano,
• Erik Piatti,
• Stefania Lettieri,
• Andrea Fin and
• Alberto Tagliaferro

Beilstein J. Nanotechnol. 2024, 15, 1041–1053, doi:10.3762/bjnano.15.85

• rings, which prevents planar deformations [33]. The same phenomenon explains the high thermal conductivity of up to 3000 W·m−1·K−1 [34][35] and the outstanding electrical properties [36][37][38]. Compared to conventional 3D materials, the understanding of electronic transport and carrier dynamics in

• graphene. rGO is produced through direct reduction of GO using physical or chemical routes [49]. Thus, the carbon-to-oxygen ratio can be increased to values of around 8:1 to 246:1, significantly higher than those of GO [50]. The electrical properties show a remarkable improvement compared with GO, even if

• substances secreted and the effectiveness of CNT action. Carbon material coatings for improved mechanical, tribological, and electrical properties Performance and longevity of implants are closely related to their mechanical properties. A mismatch with tissues can potentially lead to stress shielding

Recent progress on field-effect transistor-based biosensors: device perspective

• Billel Smaani,
• Fares Nafa,
• Mohamed Salah Benlatrech,
• Ismahan Mahdi,
• Hamza Akroum,
• Mohamed walid Azizi,
• Khaled Harrar and
• Sayan Kanungo

Beilstein J. Nanotechnol. 2024, 15, 977–994, doi:10.3762/bjnano.15.80

• 10.3762/bjnano.15.80 Abstract Over the last few decades, field-effect transistor (FET)-based biosensors have demonstrated great potential across various industries, including medical, food, agriculture, environmental, and military sectors. These biosensors leverage the electrical properties of transistors

Effect of repeating hydrothermal growth processes and rapid thermal annealing on CuO thin film properties

• Monika Ozga,
• Eunika Zielony,
• Aleksandra Wierzbicka,
• Anna Wolska,
• Marcin Klepka,
• Marek Godlewski,
• Bogdan J. Kowalski and
• Bartłomiej S. Witkowski

Beilstein J. Nanotechnol. 2024, 15, 743–754, doi:10.3762/bjnano.15.62

• , which allowed for the investigation of both topography and electrical properties of the films. Surface topography analysis was performed by utilizing an atomic force microscopy (AFM) operating in Peak Force Tapping mode. The surface was scanned at a resolution of 1024 × 1024 measurement points using a

• , cupric CuO, cuprous Cu2O and the intermediate phase paramelaconite Cu4O3. The aforementioned phases of copper oxide have different physical and electrical properties, different colors, and crystal structures [55]. By examining the Raman spectra of copper oxide compounds, phase as well as chemical

• a lower signal, which means that the electrical properties of some grains had changed. These inhomogeneities may be caused by various factors. One is the effects occurring at grain boundaries or structural defects in the boundaries. The defects disrupt the crystalline order and affect the electronic

Modulated critical currents of spin-transfer torque-induced resistance changes in NiCu/Cu multilayered nanowires

• Mengqi Fu,
• Roman Hartmann,
• Julian Braun,
• Sergej Andreev,
• Torsten Pietsch and
• Elke Scheer

Beilstein J. Nanotechnol. 2024, 15, 360–366, doi:10.3762/bjnano.15.32

• with evenly spaced magnetic layers. The magnetic and magneto-electrical properties of the multilayered nanowire array were characterized in a conventional bath cryostat at a temperature of 4.2 K. The differential resistance (dV/dI) was measured using the lock-in technique with a modulation voltage (5

Controllable physicochemical properties of WO_x thin films grown under glancing angle

• Rupam Mandal,
• Aparajita Mandal,
• Alapan Dutta,
• Rengasamy Sivakumar,
• Sanjeev Kumar Srivastava and
• Tapobrata Som

Beilstein J. Nanotechnol. 2024, 15, 350–359, doi:10.3762/bjnano.15.31

• fascinating optical and electrical properties [1]. WOx is a wide-bandgap oxide semiconductor with a large excitonic binding energy of 0.15 eV and a high optical absorption coefficient (≥104 cm−1 in the UV region) [2]. These, in conjunction with decent carrier mobility (12 cm2·V−1·s−1), make this material an

• structural, optical, and electrical properties of glancing angle-deposited NS-WOx thin films, where NS-WOx films of different thicknesses (6–60 nm) are prepared by rf sputtering and exposed to post-growth annealing at 673 K in vacuum (2 × 10−7 mbar). The role of increased oxygen vacancy concentration (OV) on

• contacts for solar cells. Conclusion A series of glancing angle-deposited NS-WOx thin films (6–60 nm) on p-Si substrates are investigated to achieve insights into their tuneable structural, optical, and electrical properties, such as crystallinity, bandgap, work function, and diode characteristics. As

Influence of conductive carbon and MnCo₂O₄ on morphological and electrical properties of hydrogels for electrochemical energy conversion

• Sylwia Pawłowska,
• Karolina Cysewska,
• Yasamin Ziai,
• Jakub Karczewski,
• Piotr Jasiński and
• Sebastian Molin

Beilstein J. Nanotechnol. 2024, 15, 57–70, doi:10.3762/bjnano.15.6

• were tested in terms of their electrical properties, showing that an increase in the concentration of conductive particles in the hydrogel structure translates into a lowering of the impedance modulus and an increase in the double-layer capacitance of the electrode. This, in turn, resulted in a higher

• catalytic activity of the electrode in the oxygen evolution reaction. The use of a hydrogel as a matrix to suspend the catalyst particles, and thus increase their availability through the electrolyte, seems to be an interesting and promising application approach. Keywords: electrical properties; energy

• structures were examined in terms of their morphology, electrical properties, and catalytic layers in the OER process. Results and Discussion Characterisation of hydrogel-based polymer composites with dispersed catalytic and conductive particles Scanning electron microscopy (SEM) analysis of hydrogel samples

A combined gas-phase dissociative ionization, dissociative electron attachment and deposition study on the potential FEBID precursor [Au(CH₃)₂Cl]₂

• Elif Bilgilisoy,
• Ali Kamali,
• Thomas Xaver Gentner,
• Gerd Ballmann,
• Sjoerd Harder,
• Hans-Peter Steinrück,
• Hubertus Marbach and
• Oddur Ingólfsson

Beilstein J. Nanotechnol. 2023, 14, 1178–1199, doi:10.3762/bjnano.14.98

• ; quantum chemical calculation; ultrahigh vacuum; Introduction In recent years, gold nanostructures have received much attention owing to their dielectric properties [1], their biocompatibility [2], and their electrical properties [3][4], which enable a multitude of exciting applications in the field of

A visible-light photodetector based on heterojunctions between CuO nanoparticles and ZnO nanorods

• Doan Nhat Giang,
• Nhat Minh Nguyen,
• Duc Anh Ngo,
• Thanh Trang Tran,
• Le Thai Duy,
• Cong Khanh Tran,
• Thi Thanh Van Tran,
• Phan Phuong Ha La and
• Vinh Quang Dang

Beilstein J. Nanotechnol. 2023, 14, 1018–1027, doi:10.3762/bjnano.14.84

• the visible range is still a challenge regarding the widespread use of this nanomaterial. Traditional methods to modify ZnO, such as doping with transition metals [24] and decorating with noble metals [25], offer additional flexibility. Doping can significantly influence the optical and electrical

• properties of ZnO nanostructures, such as bandgap or conductivity [26]. Decorating ZnO with metals such as Ag, Au, Pd, Pt, and Al [27][28] can provide surface plasmonic effects that assist the electron transfer process in materials and extend the light absorption range of a photodetector [29][30]. However

Cross-sectional Kelvin probe force microscopy on III–V epitaxial multilayer stacks: challenges and perspectives

• Mattia da Lisca,
• José Alvarez,
• James P. Connolly,
• Nicolas Vaissiere,
• Karim Mekhazni,
• Jean Decobert and
• Jean-Paul Kleider

Beilstein J. Nanotechnol. 2023, 14, 725–737, doi:10.3762/bjnano.14.59

• containing numerous layers and interfaces [1]. The capability to conduct local investigations at the nanoscale level that provide information on the electrical properties of materials and along physical interfaces is becoming crucial for solar photovoltaic device efficiency improvement [2]. Electrical

Humidity-dependent electrical performance of CuO nanowire networks studied by electrochemical impedance spectroscopy

• Jelena Kosmaca,
• Juris Katkevics,
• Jana Andzane,
• Raitis Sondors,
• Liga Jasulaneca,
• Raimonds Meija,
• Kiryl Niherysh,
• Yelyzaveta Rublova and
• Donats Erts

Beilstein J. Nanotechnol. 2023, 14, 683–691, doi:10.3762/bjnano.14.54

• nanowires are synthesized by thermal oxidation [9] and aligned between metallic microelectrodes by DEP [26]. Electrical properties of the nanowire-based system at various RH values are assessed by EIS [27][28]. To attempt a systematic study on the suitability of the CuO nanowire networks for different

Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review

• Akeem Adeyemi Oladipo,
• Saba Derakhshan Oskouei and
• Mustafa Gazi

Beilstein J. Nanotechnol. 2023, 14, 631–673, doi:10.3762/bjnano.14.52

• electrical properties. Because of the typically insulating properties of the organic linkers and low levels of π–π-orbital conjugation, significant electrical conductivity is uncommon in MOFs. Even though MOFs’ electronic characteristics have not received much attention, their potential as electrically

• conductive porous materials has only recently come to light. Recent research has demonstrated that the nature of metal clusters, their size, and the kind of organic linkers all affect the MOFs’ electronic properties [80][81]. To clarify the electrical properties of MOFs, Kuc et al. [80] used tight-binding

Carbon nanotube-cellulose ink for rapid solvent identification

• Tiago Amarante,
• Thiago H. R. Cunha,
• Claudio Laudares,
• Ana P. M. Barboza,
• Ana Carolina dos Santos,
• Cíntia L. Pereira,
• Vinicius Ornelas,
• Bernardo R. A. Neves,
• André S. Ferlauto and
• Rodrigo G. Lacerda

Beilstein J. Nanotechnol. 2023, 14, 535–543, doi:10.3762/bjnano.14.44

• of lightweight materials comprising a conductive ingredient (e.g., carbon nanotubes (CNTs), graphene, graphene oxide, and metal particles) embedded in a polymer matrix, have been extensively studied as liquid sensors [14][15][16][17][21][22]. The main idea is to combine the responsive electrical

• properties of carbon nanostructured materials with the polymer’s distinguished mechanical properties. These composites are usually non-selective and can react to various ambient stimuli [20][22][23][24][25][26][27][28][29]. Among polymers, cellulose is the most abundant natural organic polymer on earth. It