Interface properties of nanostructured carbon-coated biological implants: an overview

• Mattia Bartoli,
• Francesca Cardano,
• Erik Piatti,
• Stefania Lettieri,
• Andrea Fin and
• Alberto Tagliaferro

Beilstein J. Nanotechnol. 2024, 15, 1041–1053, doi:10.3762/bjnano.15.85

• strength. The improvements are due to the graphene coating, which allowed for a better load transfer, inter-layer sliding, and crack deflection. Similarly, Askarnia et al. [135] used electrophoretic deposition for coating a magnesium alloy with GO. The authors reported an increase of both hardness and

Biomimetic chitosan with biocomposite nanomaterials for bone tissue repair and regeneration

• Se-Kwon Kim,
• Sesha Subramanian Murugan,
• Pandurang Appana Dalavi,
• Sebanti Gupta,
• Sukumaran Anil,
• Gi Hun Seong and
• Jayachandran Venkatesan

Beilstein J. Nanotechnol. 2022, 13, 1051–1067, doi:10.3762/bjnano.13.92

• ). Besides this, significant antibacterial properties against Staphylococcus epidermidis have been found [99]. Coating materials containing chitosan, bioactive glass, and AgNPs were developed by using the electrophoretic deposition method. The produced material was coated on stainless steel 316 substrates

• the scaffold was tested using simulated bodily fluids, and mineral formation (calcium and phosphorous) on the surface was analysed using SEM [58]. To achieve biofunctionality, a scaffold composed of carbon nanotubes and chitosan was fabricated via electrophoretic deposition. These hybrid composites

Novel reversibly switchable wettability of superhydrophobic–superhydrophilic surfaces induced by charge injection and heating

• Xiangdong Ye,
• Junwen Hou and
• Dongbao Cai

Beilstein J. Nanotechnol. 2019, 10, 840–847, doi:10.3762/bjnano.10.84

• electrophoretic deposition. The transformation of hydrogen titanate to porous TiO2 (B) and anatase-type TiO2 completed the superhydrophilic–superhydrophobic transition but the process was unidirectional and irreversible. Jiang et al. [14] prepared cotton fabrics by a three-step method that comprised cotton

Interaction-tailored organization of large-area colloidal assemblies

• Silvia Rizzato,
• Elisabetta Primiceri,
• Anna Grazia Monteduro,
• Adriano Colombelli,
• Angelo Leo,
• Maria Grazia Manera,
• Roberto Rella and
• Giuseppe Maruccio

Beilstein J. Nanotechnol. 2018, 9, 1582–1593, doi:10.3762/bjnano.9.150

• crystal array can be assembled by means of various approaches with their own advantages and limitations [19][20][21]. Closed-packed arrangements of the colloidal spheres have been demonstrated by spin coating, controlled evaporation, Langmuir–Blodgett coating or electrophoretic deposition techniques [18

Facile chemical routes to mesoporous silver substrates for SERS analysis

• Elina A. Tastekova,
• Alexander Y. Polyakov,
• Anastasia E. Goldt,
• Alexander V. Sidorov,
• Alexandra A. Oshmyanskaya,
• Irina V. Sukhorukova,
• Dmitry V. Shtansky,
• Wolgang Grünert and
• Anastasia V. Grigorieva

Beilstein J. Nanotechnol. 2018, 9, 880–889, doi:10.3762/bjnano.9.82

• ], electroplating using templates [8], electrophoretic deposition of nanoparticles [9] and diverse techniques of hollow porous structure formation, for example, by aerosol pyrolysis or by smart chemical etching. The latter includes selective chemical etching of one metal component [10][11] or etching during

Synthesis of graphene–transition metal oxide hybrid nanoparticles and their application in various fields

• Arpita Jana,
• Elke Scheer and
• Sebastian Polarz

Beilstein J. Nanotechnol. 2017, 8, 688–714, doi:10.3762/bjnano.8.74

• capacitor and magnetic material [194]. NiO is considered to be a promising alternative electrode material in redox electrochemical capacitors because of its easy synthesis and high capacitance. Porous NiO–rGO hybrid films were prepared by combination of electrophoretic deposition and chemical bath

Gas sensing properties of MWCNT layers electrochemically decorated with Au and Pd nanoparticles

• Elena Dilonardo,
• Michele Penza,
• Marco Alvisi,
• Riccardo Rossi,
• Gennaro Cassano,
• Cinzia Di Franco,
• Francesco Palmisano,
• Luisa Torsi and
• Nicola Cioffi

Beilstein J. Nanotechnol. 2017, 8, 592–603, doi:10.3762/bjnano.8.64

• ; electrophoretic deposition; electrosynthesis; metal-functionalized MWCNTs; Pd nanoparticle; Introduction Today one of the trending worldwide issues is environmental pollution. Human activity, industries, transportation and agriculture, and natural phenomena, like volcano activity, are known to cause an increase

• . The electrophoretic deposition was a cathodic process in which the applied working potential was a little bit more negative than the open circuit potential (η = −200 mV), in order to induce the migration of the positively charged colloidal NPs towards the MWCNT-based device, used as cathode. This mild

• images confirm the control of the density of the deposited metal NPs by electrophoretic deposition time. Specifically, at a higher metal content, the Au NPs remain isolated, decorating the MWCNT sidewalls in a noncontinuous manner (Figure 4C). On the contrary, an almost contiguous distribution of Pd NPs

Donor–acceptor graphene-based hybrid materials facilitating photo-induced electron-transfer reactions

• Anastasios Stergiou,
• Georgia Pagona and
• Nikos Tagmatarchis

Beilstein J. Nanotechnol. 2014, 5, 1580–1589, doi:10.3762/bjnano.5.170

• . This configuration allows for photocurrent measurements under electrochemical bias. Electrophoretic deposition is applied to fabricate films of the graphene-based hybrid material onto an optically transparent electrode (OTE) covered with nanostructured SnO2. Typically, a suspension of the graphene

Nanostructure sensitization of transition metal oxides for visible-light photocatalysis

• Hongjun Chen and
• Lianzhou Wang

Beilstein J. Nanotechnol. 2014, 5, 696–710, doi:10.3762/bjnano.5.82

• assembly pre-synthesized quantum dots method and found that the performance of heterojunctions by the in situ growth method exhibits a more efficient interfacial charge transfer than that of electrophoretic deposition [44]. From this comparison, it can be clearly seen that the in situ growth method can

Low-temperature solution growth of ZnO nanotube arrays

• Ki-Woong Chae,
• Qifeng Zhang,
• Jeong Seog Kim,
• Yoon-Ha Jeong and
• Guozhong Cao

Beilstein J. Nanotechnol. 2010, 1, 128–134, doi:10.3762/bjnano.1.15

• prepared by electrophoretic deposition and annealed at 500 °C for 30 min. The film is homogeneous and comprises nanocrystallites of about 20–50 nm in size. It is well known that for either solution growth or vapor deposition, the morphology of ZnO nanorods in terms of size and size distribution could be

• significantly affected by the uniformity and crystal size of the seeds, which act as initial sites for the crystal nucleation [29][30][31][32]. The presented electrophoretic deposition method was effective for making high-quality ZnO nanocrystallite seeds on ITO substrates, as reported previously [33][34][35

• . Experimental ZnO nanorods were grown on an indium doped tin oxide (ITO) glass substrate, on which ZnO nanocrystallites as seeds were pre-prepared via an electrophoretic deposition. Typically, the ITO substrate was immersed in a 0.5 M zinc nitrate (Fisher Scientific Corp., USA), and an electric potential of 2.5