Unveiling the potential of alginate-based nanomaterials in sensing technology and smart delivery applications

• Shakhzodjon Uzokboev,
• Khojimukhammad Akhmadbekov,
• Ra’no Nuritdinova,
• Salah M. Tawfik and
• Yong-Ill Lee

Beilstein J. Nanotechnol. 2024, 15, 1077–1104, doi:10.3762/bjnano.15.88

• , leading to superior functionality and enhanced metal sensing capabilities [111]. He et al. developed fluorescent fibers from alginate reinforced with gold (Au) nanoclusters by using a wet-spinning technique [112]. The fluorescent fibers exhibited good selectivity and sensitivity towards Cu2+ and Hg2

Effect of wavelength and liquid on formation of Ag, Au, Ag/Au nanoparticles via picosecond laser ablation and SERS-based detection of DMMP

• Sree Satya Bharati Moram,
• Chandu Byram and
• Venugopal Rao Soma

Beilstein J. Nanotechnol. 2024, 15, 1054–1069, doi:10.3762/bjnano.15.86

• Abstract The present study investigates the effects of input wavelength (1064, 532, and 355 nm) and surrounding liquid environment (distilled water and aqueous NaCl solution) on the picosecond laser ablation on silver (Ag), gold (Au), and Ag/Au alloy targets. The efficacy of the laser ablation technique

Atomistic insights into the morphological dynamics of gold and platinum nanoparticles: MD simulations in vacuum and aqueous media

• Evangelos Voyiatzis,
• Eugenia Valsami-Jones and
• Antreas Afantitis

Beilstein J. Nanotechnol. 2024, 15, 995–1009, doi:10.3762/bjnano.15.81

• , and the temperature. To this end, atomistic molecular dynamics simulations have been performed for gold (Au) and platinum (Pt) NPs with diameters from 1 to 8 nm for a range of temperatures. Bulk Au and Pt materials share the same unit cell of the crystal structure, yet they differ in the strength of

Gold nanomakura: nanoarchitectonics and their photothermal response in association with carrageenan hydrogels

• Nabojit Das,
• Vikas,
• Akash Kumar,
• Sanjeev Soni and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2024, 15, 678–693, doi:10.3762/bjnano.15.56

• synthesis of CTAB-AuNM, MTAB-AuNM, and DTAB-AuNM, a two-step reduction method showing gold (Au) seed preparation and formation of AuNMs in growth medium. (b) Absorption spectra of different surfactant-capped Au seeds over a wavelength range of 300–900 nm. (c) Absorption spectra of CTAB-AuNM, MTAB-AuNM, and

Ultrasensitive and ultrastretchable metal crack strain sensor based on helical polydimethylsiloxane

• Shangbi Chen,
• Dewen Liu,
• Weiwei Chen,
• Huajiang Chen,
• Jiawei Li and
• Jinfang Wang

Beilstein J. Nanotechnol. 2024, 15, 270–278, doi:10.3762/bjnano.15.25

• from the taobao shopping platform. The medical rubber gloves and injection syringes were procured from a local hospital (Shanghai, China). The titanium (Ti) target (99.99%) utilized for the adhesion layer was purchased from Deyang Ona New Materials Co., Ltd. The gold (Au) target (99.999%) employed for

Impact of device design on the electronic and optoelectronic properties of integrated Ru-terpyridine complexes

• Max Mennicken,
• Sophia Katharina Peter,
• Corinna Kaulen,
• Ulrich Simon and
• Silvia Karthäuser

Beilstein J. Nanotechnol. 2022, 13, 219–229, doi:10.3762/bjnano.13.16

• , and Au 4f were recorded. Data analysis was conducted using CasaXPS (Casa Software, Ltd.) after subtraction of a Shirley background. The binding energies (BE) were calibrated to give the signal for metallic gold Au 4f7/2 at 84.0 eV. Scanning electron microscopy (SEM) was performed with a Hitachi SU8000

Sputtering onto liquids: a critical review

• Anastasiya Sergievskaya,
• Adrien Chauvin and
• Stephanos Konstantinidis

Beilstein J. Nanotechnol. 2022, 13, 10–53, doi:10.3762/bjnano.13.2

• [11]. Afterward, Torimoto et al. used a sputter coater for the synthesis of small gold (Au) NPs by sputtering an Au target onto a thin layer of an ionic liquid (IL) [12]. This paper [12] published in 2006 initiated a series of similar works in several labs which, were focused on the deposition of

Morphology-driven gas sensing by fabricated fractals: A review

• Vishal Kamathe and
• Rupali Nagar

Beilstein J. Nanotechnol. 2021, 12, 1187–1208, doi:10.3762/bjnano.12.88

• plasmonic gold (Au) metasurface for sensing volatile organic compounds (VOCs) [49]. This modification enhanced the plasmonic field and local surface plasmonic resonance (LSPR). The influence of the gold nanodisk diameter and the average thickness of the TiO2 fractal on LSPR sensing of VOCs, specifically

Fabrication of nano/microstructures for SERS substrates using an electrochemical method

• Jingran Zhang,
• Tianqi Jia,
• Xiaoping Li,
• Junjie Yang,
• Zhengkai Li,
• Guangfeng Shi,
• Xinming Zhang and
• Zuobin Wang

Beilstein J. Nanotechnol. 2020, 11, 1568–1576, doi:10.3762/bjnano.11.139

• electrochemical method, three-dimensional arrayed nanopore structures are machined onto a Mg surface. The structured Mg surface is coated with a thin gold (Au) film, which is used as a surface-enhanced Raman scattering (SERS) substrate. A rhodamine 6G (R6G) probe molecule is used as the detection agent for the

• . Additionally, a 10−6 mol·L−1 solution of lysozyme was successfully detected using the Mg–Au nanopore substrates. Our low-cost method is reproducible, homogeneous, and suitable for the fabrication of SERS substrates. Keywords: electrochemical machining; gold (Au); lysozyme detection; magnesium (Mg); micro

Design of V-shaped cantilevers for enhanced multifrequency AFM measurements

• Mehrnoosh Damircheli and
• Babak Eslami

Beilstein J. Nanotechnol. 2020, 11, 1525–1541, doi:10.3762/bjnano.11.135

• dimensions, the optimum V-shaped cantilever that can provide the maximum phase contrast in bimodal AFM between gold (Au) and polystyrene (PS) is found. Based on this study, it is found that as the length of the cantilever increases the 2nd eigenmode phase contrast decreases. However, the base width exhibits

• geometries while interacting with polystyrene (PS) and gold (Au) surfaces in bimodal AFM. The tip–sample force interactions are categorized into long-range van der Waals forces and short-range forces described by the Derjaguin, Muller and Toporov (DMT) model. The instantaneous tip distance d is defined as d

• order to find the optimum geometry, the cantilever is modeled as a Timoshenko beam and is excited simultaneously by two fundamental bending modes as bimodal AFM. In each step, the optimum dimensional parameter yielding the highest material composition contrast between two samples of gold (Au) and

Wafer-level integration of self-aligned high aspect ratio silicon 3D structures using the MACE method with Au, Pd, Pt, Cu, and Ir

• Mathias Franz,
• Romy Junghans,
• Paul Schmitt,
• Adriana Szeghalmi and
• Stefan E. Schulz

Beilstein J. Nanotechnol. 2020, 11, 1439–1449, doi:10.3762/bjnano.11.128

• layer for the wet etching of silicon. The MACE process has been extensively studied over the last decade [13][14][15][16]. In theory, the process works with a wide range of noble metals. The main focus in research has been set on the noble metals gold (Au) and silver (Ag) [2][17][18][19]. Other studies

Correlation of surface-enhanced Raman scattering (SERS) with the surface density of gold nanoparticles: evaluation of the critical number of SERS tags for a detectable signal

• Vincenzo Amendola

Beilstein J. Nanotechnol. 2019, 10, 1016–1023, doi:10.3762/bjnano.10.102

• plasmonic nanoparticles dispersed on a substrate [38], inside microcavities [39], or even while monitoring electrochemical reactions [40]. This work reports on the study of SERS tags obtained by laser ablation synthesis in liquid solution (LASiS) of gold (Au) nanoparticles, their coating with three

Bidirectional biomimetic flow sensing with antiparallel and curved artificial hair sensors

• Claudio Abels,
• Antonio Qualtieri,
• Toni Lober,
• Alessandro Mariotti,
• Lily D. Chambers,
• Massimo De Vittorio,
• William M. Megill and
• Francesco Rizzi

Beilstein J. Nanotechnol. 2019, 10, 32–46, doi:10.3762/bjnano.10.4

• ) piezoresistors, which are 100 nm thick and distributed along the full length of the cantilever beam. In a subsequent deposition step, four 150 nm thick gold (Au) contact pads are deposited. Defining the cantilever U-shapes: A trifluoromethane (CHF3) based inductively coupled plasma (ICP) dry etching step at the

Surface-plasmon-enhanced ultraviolet emission of Au-decorated ZnO structures for gas sensing and photocatalytic devices

• T. Anh Thu Do,
• Truong Giang Ho,
• Thu Hoai Bui,
• Quang Ngan Pham,
• Hong Thai Giang,
• Thi Thu Do,
• Duc Van Nguyen and
• Dai Lam Tran

Beilstein J. Nanotechnol. 2018, 9, 771–779, doi:10.3762/bjnano.9.70

• quantity of active electrons involved in the surface response plays a key role for the sensor performance. The incorporation of noble metal nanostructures such as gold (Au) into ZnO surfaces is considered as an effective way to enhance the gas sensing response and to reduce the operation temperature and

Bombyx mori silk/titania/gold hybrid materials for photocatalytic water splitting: combining renewable raw materials with clean fuels

• Stefanie Krüger,
• Michael Schwarze,
• Otto Baumann,
• Christina Günter,
• Michael Bruns,
• Christian Kübel,
• Dorothée Vinga Szabó,
• Rafael Meinusch,
• Verónica de Zea Bermudez and
• Andreas Taubert

Beilstein J. Nanotechnol. 2018, 9, 187–204, doi:10.3762/bjnano.9.21

• Giessen, Germany Department of Chemistry and CQ-VR, University of Trás-os-Montes e Alto Douro, Pt-5001-801 Vila Real, Portugal 10.3762/bjnano.9.21 Abstract The synthesis, structure, and photocatalytic water splitting performance of two new titania (TiO2)/gold(Au)/Bombyx mori silk hybrid materials are

Evaluating the toxicity of TiO₂-based nanoparticles to Chinese hamster ovary cells and Escherichia coli: a complementary experimental and computational approach

• Alicja Mikolajczyk,
• Natalia Sizochenko,
• Ewa Mulkiewicz,
• Anna Malankowska,
• Michal Nischk,
• Przemyslaw Jurczak,
• Seishiro Hirano,
• Grzegorz Nowaczyk,
• Adriana Zaleska-Medynska,
• Jerzy Leszczynski,
• Agnieszka Gajewicz and
• Tomasz Puzyn

Beilstein J. Nanotechnol. 2017, 8, 2171–2180, doi:10.3762/bjnano.8.216

• inhibiting activity [5][6]. Reactivity of TiO2 under visible light (λ > 400 nm) can be achieved in several ways [7], including: (a) metal doping [8], (b) non-metal doping [9][10], (c) self-doping (reductive treatments) [11][12], (d) surface modification by noble-metal nanoparticles of silver (Ag), gold (Au

• bactericidal activity (towards Gram-positive B. subtilis and Gram-negative P. putida) than NPs activated by UV [4]. At the same time, no significant cytotoxicity has been detected for TiO2 doped with nitrogen (N), gold (Au) or selenium (Sn) [20][21]. Whereas, copper oxide-doped TiO2 and iron/nitrogen co-doped

Micro- and nano-surface structures based on vapor-deposited polymers

• Hsien-Yeh Chen

Beilstein J. Nanotechnol. 2017, 8, 1366–1374, doi:10.3762/bjnano.8.138

• cell pluripotency against mouse embryonic stem cells [72]. A plasma-polymerized surface with gradient amino functionality was demonstrated to generate density gradients of individual gold (Au) and silver (Ag) nanoparticles on the surfaces [73]. Poly(p-xylylene) surfaces with continuously and counter

Surface-enhanced Raman scattering of self-assembled thiol monolayers and supported lipid membranes on thin anodic porous alumina

• Marco Salerno,
• Amirreza Shayganpour,
• Barbara Salis and
• Silvia Dante

Beilstein J. Nanotechnol. 2017, 8, 74–81, doi:10.3762/bjnano.8.8

• with ≈160 nm pore diameter and ≈80 nm corresponding wall thickness to be prepared. The tAPA surfaces were made SERS-active by coating with a thin (≈25 nm) gold (Au) layer. The as obtained tAPA–Au substrates were incubated first with different thiols, namely mercaptobenzoic acid (MbA) and aminothiol (AT

Active and fast charge-state switching of single NV centres in diamond by in-plane Al-Schottky junctions

• Christoph Schreyvogel,
• Vladimir Polyakov,
• Sina Burk,
• Helmut Fedder,
• Andrej Denisenko,
• Felipe Fávaro de Oliveira,
• Ralf Wunderlich,
• Jan Meijer,
• Verena Zuerbig,
• Jörg Wrachtrup and
• Christoph E. Nebel

Beilstein J. Nanotechnol. 2016, 7, 1727–1735, doi:10.3762/bjnano.7.165

• channel, NV centres are quenched, i.e., switched to the nonfluorescent state NV+ as proved by PL-intensity mappings which show no bright spots (Figure 1d). For fabricating a two-dimensional Schottky diode structure, aluminium (Al) and gold (Au) contacts with a thickness of 200 nm each were deposited onto

Dealloying of gold–copper alloy nanowires: From hillocks to ring-shaped nanopores

• Adrien Chauvin,
• Cyril Delacôte,
• Mohammed Boujtita,
• Benoit Angleraud,
• Junjun Ding,
• Chang-Hwan Choi,
• Pierre-Yves Tessier and
• Abdel-Aziz El Mel

Beilstein J. Nanotechnol. 2016, 7, 1361–1367, doi:10.3762/bjnano.7.127

• defects on the surface of the nanograted structures. We demonstrate the ability of forming nanowires with such a special morphology with various metals including gold (Au), copper (Cu), silver (Ag), gold/copper (Au–Cu) and gold/silver (Au–Ag) alloys (Figure 1b). We further show that by applying a

Viability and proliferation of endothelial cells upon exposure to GaN nanoparticles

• Tudor Braniste,
• Ion Tiginyanu,
• Tibor Horvath,
• Simion Raevschi,
• Serghei Cebotari,
• Marco Lux,
• Axel Haverich and
• Andres Hilfiker

Beilstein J. Nanotechnol. 2016, 7, 1330–1337, doi:10.3762/bjnano.7.124

• living cells and different types of nanoparticles of specific shape, surface charge, and chemical composition [4]. For example, elongated, rod-like gold (Au) nanoparticles affect the viability of endothelial cells more than spherical ones, which have better biocompatibility [5]. However, multiwalled

• into gas without crossing the interface. The final step before imaging involved sputtering the surface of samples with 10 nm of elementary gold (Au) using a Polaron SEM coating system. Statistics All data are given as mean ± standard deviation. The statistical analysis was performed with the Prism

Hemolysin coregulated protein 1 as a molecular gluing unit for the assembly of nanoparticle hybrid structures

• Tuan Anh Pham,
• Andreas Schreiber,
• Elena V. Sturm (née Rosseeva),
• Stefan Schiller and
• Helmut Cölfen

Beilstein J. Nanotechnol. 2016, 7, 351–363, doi:10.3762/bjnano.7.32

• gluing unit for the assembly of often linear, hybrid structures of plasmonic gold (Au NP), magnetite (Fe3O4 NP), and cobalt ferrite nanoparticles (CoFe2O4 NP). Furthermore, the assembly of Au NPs into linear structures using Hcp1_cys3 is investigated by UV–vis spectroscopy, TEM and cryo-TEM. One key

Functional fusion of living systems with synthetic electrode interfaces

• Oskar Staufer,
• Sebastian Weber,
• C. Peter Bengtson,
• Hilmar Bading,
• Joachim P. Spatz and
• Amin Rustom

Beilstein J. Nanotechnol. 2016, 7, 296–301, doi:10.3762/bjnano.7.27

• : biointerface; biosensor; energy harvesting; nanoelectrodes; Physarum polycephalum; Findings The formation process of nanoelectrode interfaces (NEIs) was based on track-etch template synthesis as schematically shown in Figure 1a. First, monocrystalline gold (Au) nanowires in parallel arrangement featuring

Synthesis and applications of carbon nanomaterials for energy generation and storage

• Marco Notarianni,
• Jinzhang Liu,
• Kristy Vernon and
• Nunzio Motta

Beilstein J. Nanotechnol. 2016, 7, 149–196, doi:10.3762/bjnano.7.17

Electrochemical coating of dental implants with anodic porous titania for enhanced osteointegration

• Amirreza Shayganpour,
• Alberto Rebaudi,
• Pierpaolo Cortella,
• Alberto Diaspro and
• Marco Salerno

Beilstein J. Nanotechnol. 2015, 6, 2183–2192, doi:10.3762/bjnano.6.224

• ). Concurrently, the chemical composition, as assessed by energy dispersive spectroscopy (EDS), also looked quite similar. In Figure 1d the EDS spectrum of a typical S&M implant is shown. It appears that, in addition to Ti from the bulk implant core and gold (Au) from the coating deposited for SEM analysis