Fabrication of hafnium-based nanoparticles and nanostructures using picosecond laser ablation

• Abhishek Das,
• Mangababu Akkanaboina,
• Jagannath Rathod,
• R. Sai Prasad Goud,
• Kanaka Ravi Kumar,
• Raghu C. Reddy,
• Ratheesh Ravendran,
• Katia Vutova,
• S. V. S. Nageswara Rao and
• Venugopal Rao Soma

Beilstein J. Nanotechnol. 2024, 15, 1639–1653, doi:10.3762/bjnano.15.129

• formation of laser-induced periodic surface structures (LIPSS) with low spatial frequency (LSFL) and high spatial frequency (HSFL) orthogonal to each other was also demonstrated. The LSFL and HSFL both exhibited quasi-periodicity. This work presents a simple way to fabricate HfO2 and HfC NPs and provides

Laser-processed antiadhesive bionic combs for handling nanofibers inspired by nanostructures on the legs of cribellate spiders

• Sebastian Lifka,
• Kristóf Harsányi,
• Erich Baumgartner,
• Lukas Pichler,
• Dariya Baiko,
• Karsten Wasmuth,
• Johannes Heitz,
• Marco Meyer,
• Anna-Christin Joel,
• Jörn Bonse and
• Werner Baumgartner

Beilstein J. Nanotechnol. 2022, 13, 1268–1283, doi:10.3762/bjnano.13.105

• sticking of an artificially nonwoven of nanofibers. According to the theoretical prediction, a technical analogon of the nanoripples was produced by ultrashort pulse laser processing on different technically relevant metal surfaces in the form of so-called laser-induced periodic surface structures (LIPSS

• randomly rough surfaces. The latter revealed that the adhesion of electrospun nanofiber nonwoven is significantly lowered on the nanostructured surfaces compared with the polished surfaces. Keywords: biomimetics; electrospinning; laser-induced periodic surface structures (LIPSS); nanofibers

• surface structure, in contrast to earlier published works where solids with plane surfaces were assumed [24][25][26][27][28]. This is an important difference, which has to be considered when modelling the interaction of nanofibers with, in this case, a sinusoidal surface. Laser-induced periodic surface

Femtosecond laser-assisted fabrication of chalcopyrite micro-concentrator photovoltaics

• Franziska Ringleb,
• Stefan Andree,
• Berit Heidmann,
• Jörn Bonse,
• Katharina Eylers,
• Owen Ernst,
• Torsten Boeck,
• Martina Schmid and
• Jörg Krüger

Beilstein J. Nanotechnol. 2018, 9, 3025–3038, doi:10.3762/bjnano.9.281

• -induced periodic surface structures (LIPSS [19]) and round melting features form on the glass surface (Figure 5b). The LIPSS with periods in the sub-micrometer range are generated via intra-pulse scattering and interference of the fs-laser radiation at the roughened glass surface, leading to the spatially

• of laser modifications on glass, which were recorded at tilting angles of 0 and 52° with respect to the surface normal, are depicted in Figure 5. Figure 5a shows a laser spot with slight surface roughening that increases towards the center. Using a somewhat higher laser fluence, pronounced laser

Biomimetic surface structures in steel fabricated with femtosecond laser pulses: influence of laser rescanning on morphology and wettability

• Camilo Florian Baron,
• Alexandros Mimidis,
• Daniel Puerto,
• Evangelos Skoulas,
• Emmanuel Stratakis,
• Javier Solis and
• Jan Siegel

Beilstein J. Nanotechnol. 2018, 9, 2802–2812, doi:10.3762/bjnano.9.262

• surface topography needs to be mimicked, but often also a specific function of the structure. An alternative approach to laser direct writing of complex structures is the generation of laser-induced periodic surface structures (LIPSS), which is based on directed self-organization of the material and