Recent advances in photothermal nanomaterials for ophthalmic applications

• Jiayuan Zhuang,
• Linhui Jia,
• Chenghao Li,
• Rui Yang,
• Jiapeng Wang,
• Wen-an Wang,
• Heng Zhou and
• Xiangxia Luo

Beilstein J. Nanotechnol. 2025, 16, 195–215, doi:10.3762/bjnano.16.16

• photothermal conversion and tunability of light absorption of these materials simplify the therapeutic light source, broadening their applicability [17][18]. Furthermore, the customizable nature of these nanomaterials allows for the development of personalized treatment plans, tailored to individual patient

• an aim to contribute to the improvement of global visual health. 2 Photothermal treatment mechanisms and nanomaterial properties of ophthalmic nanomedicines Nanomaterials with highly tunable photothermal conversion properties are referred to as photothermal nanomaterials [22]. These materials are

• categorized into three distinct types based on their different photothermal conversion mechanisms, which arise from their unique electronic structures [23][24]. The types include metals exhibiting localized surface plasmon resonance (LSPR), carbon and polymer materials undergoing molecular thermal vibration

Gold nanomakura: nanoarchitectonics and their photothermal response in association with carrageenan hydrogels

• Nabojit Das,
• Vikas,
• Akash Kumar,
• Sanjeev Soni and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2024, 15, 678–693, doi:10.3762/bjnano.15.56

• Mahatma Gandhi Marg, Lucknow 226001, India Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India Biomedical Applications Group, CSIR-Central Scientific Instruments Organisation, Sector 30C, Chandigarh 160030, India 10.3762/bjnano.15.56 Abstract Photothermal conversion of light

• analysis at 670, 650, and 630 nm in CTAB-AuNM, MTAB-AuNM, and DTAB-AuNM, respectively. Furthermore, the impact of morphology and surrounding milieu of the synthesized nanomakuras on photothermal conversion is investigated owing to their retention of plasmonic stability. Interestingly, we found that

• photothermal conversion was exclusively assigned to morphological features (i.e., nanoparticles of higher aspect ratio showed higher temperature change and vice versa irrespective of the surfactant used). To enable biofunctionality and stability, we used kappa-carrageenan- (k-CG) based hydrogels for

Vinorelbine-loaded multifunctional magnetic nanoparticles as anticancer drug delivery systems: synthesis, characterization, and in vitro release study

• Zeynep Özcan and
• Afife Binnaz Hazar Yoruç

Beilstein J. Nanotechnol. 2024, 15, 256–269, doi:10.3762/bjnano.15.24

• neurotransmitter naturally occurring in the brain and can spontaneously polymerize into polydopamine (PDA) under alkaline conditions without oxidants [22]. Polydopamine can form a coating with biocompatibility advantages, achieving up to 40% photothermal conversion efficiency, nanoscale dimensions, and

• customizable morphology [23][24]. Additionally, the photothermal conversion efficiency of PDA, PDA concentration, reaction time, and PDA thickness can be adjusted. Importantly, PDA exhibits a 40% photothermal conversion rate with excellent photothermal stability, indicating its significant potential as a NIR

Nanoarchitectonics of photothermal materials to enhance the sensitivity of lateral flow assays

• Elangovan Sarathkumar,
• Rajasekharan S. Anjana and
• Ramapurath S. Jayasree

Beilstein J. Nanotechnol. 2023, 14, 988–1003, doi:10.3762/bjnano.14.82

• , iron oxide nanoparticles are the most prominent ones because of their biocompatibility, low toxicity, ease of synthesis, and high photothermal conversion efficiency. The influence of a magnetic field can also increase temperature generation by such nanoparticles, which is called magnetic hyperthermia

• highest photothermal conversion efficiency. In addition, these materials also possess high thermal and electrical conductivity, high aspect ratio, light weight, and high mechanical strength, because of which these materials are used for photothermal applications [36]. Polyhydroxylated fullerenes were

• nanoparticles. COF–CuSe can also increase the photothermal conversion efficiency up to 26%, which is higher than that of COF-Fe3O4 [36]. Nanoarchitectonics of photothermal materials The photon-to-heat conversion efficiency of nanomaterials depends on intrinsic factors, such as shape, size, crystallinity, and

Conjugated photothermal materials and structure design for solar steam generation

• Chia-Yang Lin and
• Tsuyoshi Michinobu

Beilstein J. Nanotechnol. 2023, 14, 454–466, doi:10.3762/bjnano.14.36

• efficiency in solar steam generation (SSG), three factors must be considered, namely solar light absorption, photothermal conversion efficiency, and vaporization efficiency (Figure 1). In addition, the cost of the materials must be taken into consideration as large quantities at low cost are required

• first one is sunlight absorption. PTMs must be able to efficiently absorb light in order to utilize the irradiation energy. The second one is the photothermal conversion efficiency. Absorbed light needs to be converted to heat energy rather than other forms of energy loss. The last one is the efficiency

• from 300 to 2500 nm and reflectance, transmission, and radiative relaxation must not be significant in order to maximize the energy absorbed from the sun and convert it into thermal energy (Figure 2b). Photothermal conversion efficiency Solar energy can be converted into various forms of energy such as

Recent progress in cancer cell membrane-based nanoparticles for biomedical applications

• Qixiong Lin,
• Yueyou Peng,
• Yanyan Wen,
• Xiaoqiong Li,
• Donglian Du,
• Weibin Dai,
• Wei Tian and
• Yanfeng Meng

Beilstein J. Nanotechnol. 2023, 14, 262–279, doi:10.3762/bjnano.14.24

• been applied to treat prostate cancer [56]. This nanoagent shows good drug-loading capacity and photosensitivity and can be applied in NIR photothermal conversion. After the autophagy inhibitor chloroquine (CQ) was loaded onto the nanocarrier, it was coated with prostate cancer cell membrane for tumor

• targeting and hyperthermia [56]. In a therapeutic strategy for HCC, hepatoma cell membranes and macrophage membranes were hybridized to obtain the advantages of different cell membranes [78]. When nanocarriers with photothermal conversion ability were used to carry the anticancer drug sorafenib, efficient

• the ability to target tumor tissue and enable multimodal imaging was fabricated for more efficient diagnosis and treatment by the Shu group. The biomimetic nanoformulation utilized hollow mesoporous Prussian blue nanoparticles as the core, endowing it with photothermal conversion and photoacoustic

Concentration-dependent photothermal conversion efficiency of gold nanoparticles under near-infrared laser and broadband irradiation

• Vikas,
• Raj Kumar and
• Sanjeev Soni

Beilstein J. Nanotechnol. 2023, 14, 205–217, doi:10.3762/bjnano.14.20

• Organisation, Sector-30C, Chandigarh-160030, India 10.3762/bjnano.14.20 Abstract The photothermal conversion efficiency of gold different nanoparticles (GNPs) in different concentrations (1.25–20 µg/mL) and at different irradiation intensities of near-infrared (NIR) broadband and NIR laser irradiation is

• evaluated. Results show that for a concentration of 20.0 µg/mL, 40 nm gold nanospheres, 25 × 47 nm gold nanorods (GNRs), and 10 × 41 nm GNRs show a 4–110% higher photothermal conversion efficiency under NIR broadband irradiation than under NIR laser irradiation. Broadband irradiation seems suitable to

• –11% increase in efficiency. Under NIR laser irradiation, the photothermal conversion efficiency increases with an increase in optical power. The findings will facilitate the selection of nanoparticle concentrations, irradiation source, and irradiation power for a variety of plasmonic photothermal

Facile preparation of Au- and BODIPY-grafted lipid nanoparticles for synergized photothermal therapy

• Yuran Wang,
• Xudong Li,
• Haijun Chen and
• Yu Gao

Beilstein J. Nanotechnol. 2022, 13, 1432–1444, doi:10.3762/bjnano.13.118

• organic PTAs, boron dipyrromethenes (BODIPYs) have attracted increasing attention because of high molar absorption coefficient and photochemical stability [11]. Besides, fabricating BODIPYs with halogenated substituents can improve the photothermal conversion efficiency during PTT [12]. However, BODIPYs

• changes of water, BDP, Au-LNPs, and AB-LNPs with a BDP concentration of 100 μM and a Au concentration of 100 μM with laser irradiation (680 nm, 0.5 W/cm2) were also recorded for 10 min. The temperature of the samples for photothermal conversion measurements was recorded by an infrared thermal camera

• transitions for better photothermal conversion efficiency [13][14]. In this work, we chose a halogenated BODIPY with good photothermal conversion rate to be grafted onto Au-LNPs for synergistic PTT. In current study, we attempted to create AB-LNPs by simply grafting Au and BDP onto the surface of LNPs. The

Photothermal ablation of murine melanomas by Fe₃O₄ nanoparticle clusters

• Xue Wang,
• Lili Xuan and
• Ying Pan

Beilstein J. Nanotechnol. 2022, 13, 255–264, doi:10.3762/bjnano.13.20

• the photothermal effect was mainly attributed to Fe3O4 NPCs. As expected, stronger power densities led to markedly higher temperatures (Figure 2b). Altogether, our results support a rapid and strong photothermal conversion capacity of Fe3O4 NPCs that carry beneficial potential as photothermal agents

• vivo. Conclusion In summary (Figure 6), we fabricated Fe3O4 nanoparticle clusters of uniform spherical shape, with high absorption at the near-infrared 808 nm wavelength, superparamagnetism, and a strong capacity of photothermal conversion. Both in vitro studies using an immortalized A375 melanoma cell

• ) Magnetic hysteresis curves of individual Fe3O4 nanoparticles as well as NPCs. The insert shows aggregation of NPCs dispersed in aqueous solution by a magnet. (d) DLS characterization of NPCs dispersed in cell culture medium. (e) DLS results of NPCs suspension after five heating/cooling cycles. Photothermal

Engineered titania nanomaterials in advanced clinical applications

• Padmavati Sahare,
• Paulina Govea Alvarez,
• Juan Manual Sanchez Yanez,
• Gabriel Luna-Bárcenas,
• Samik Chakraborty,
• Sujay Paul and
• Miriam Estevez

Beilstein J. Nanotechnol. 2022, 13, 201–218, doi:10.3762/bjnano.13.15

• therapeutic window for a convenient timespan to significantly improve the remedy for several diseases, including cancer. TiO2 nanomaterials are often used as photosensitizers or as carriers for the delivery of photosensitizing agents, which enhances therapeutic efficacy by increasing the photothermal

• conversion efficiency and by an accumulation of photosensitizers in tumor sites. ROS-related cancer therapeutics such as photodynamic therapy, sonodynamic therapy, and chemical dynamic therapy showed great potential to significantly enhance the precision and efficacy of cancer therapeutics [14]. Neoplastic

• . synthesized B-TiO2−x nps by a facile aluminium reduction process and modified its surface with PEG molecules (Figure 7) for high stability under physiological conditions. B-TiO2−x-PEG accumulates in tumor tissue via typical endocytosis processes and functions as nanosonosensitizer as well as photothermal

Self-assembly of amino acids toward functional biomaterials

• Huan Ren,
• Lifang Wu,
• Lina Tan,
• Yanni Bao,
• Yuchen Ma,
• Yong Jin and
• Qianli Zou

Beilstein J. Nanotechnol. 2021, 12, 1140–1150, doi:10.3762/bjnano.12.85

• maintain the photothermal conversion efficiency up to 32.0%. After entering the tumor cells, the nanoparticles convert light into heat under a laser irradiation of 808 nm and effectively kill the tumor cells. Inspired by natural photosynthesis, artificial light systems consisting of photosensitizers and

Rapid controlled synthesis of gold–platinum nanorods with excellent photothermal properties under 808 nm excitation

• Jialin Wang,
• Qianqian Duan,
• Min Yang,
• Boye Zhang,
• Li Guo,
• Pengcui Li,
• Wendong Zhang and
• Shengbo Sang

Beilstein J. Nanotechnol. 2021, 12, 462–472, doi:10.3762/bjnano.12.37

• . Keywords: AuNRs; local surface plasmon resonance (LSPR); photothermal conversion efficiency; photothermal transduction agents; platinum; Introduction On the surface of noble metal nanoparticles, when the wavelength of incident light resonates with the light absorption wavelength of the nanoparticles, a

• of Technology, Taiyuan 030024, Shanxi, China Department of Orthopedics, the Second Hospital of Shanxi Medical University, Taiyuan 030024, Shanxi, China 10.3762/bjnano.12.37 Abstract Noble metal nanomaterials are particularly suitable as photothermal transduction agents (PTAs) with high photothermal

• conversion efficiency (PCE) due to local surface plasmon resonance (LSPR). Studies on different gold–platinum (Au–Pt) bimetal nanoparticles exhibiting the LSPR effect have provided a new idea for the synthesis of excellent PTAs. But there is no simple and scalable method for the controllable synthesis of Au

Doxorubicin-loaded gold nanorods: a multifunctional chemo-photothermal nanoplatform for cancer management

• Uzma Azeem Awan,
• Abida Raza,
• Shaukat Ali,
• Rida Fatima Saeed and
• Nosheen Akhtar

Beilstein J. Nanotechnol. 2021, 12, 295–303, doi:10.3762/bjnano.12.24

• , nanorods, nanoshells, and nanocages) have great potential in photothermal cancer therapy due to plasmonic properties and the ease of biofunctionalization. Gold nanorods (GNRs) are more preferable than other gold nanomaterials because of their photothermal conversion efficiency. Better nanotherapeutics can

• pH value (approximately pH 5) of intracellular lysosomes and extracellular tissues of tumors [31]. In order to prove the photothermal conversion ability of the nanorods PSS-GNRS and PSS-GNRs-DOX (10 µg Au/mL) were exposed to NIR laser irradiation (808 nm) at a power density of 1.5 W/cm2 for 2 min

• lead to decreased stability and an enhanced drug diffusion coefficient. No drastic change in temperature of the solution was observed after NIR irradiation. Hong et al. developed a system to estimate the photothermal conversion efficacy of GNRs for different irradiation laser powers and reported that

Photothermally active nanoparticles as a promising tool for eliminating bacteria and biofilms

• Mykola Borzenkov,
• Piersandro Pallavicini,
• Angelo Taglietti,
• Laura D’Alfonso,
• Maddalena Collini and
• Giuseppe Chirico

Beilstein J. Nanotechnol. 2020, 11, 1134–1146, doi:10.3762/bjnano.11.98

• nanoparticles produce thermal relaxation, leading to a local increase in the temperature. The overall photothermal effect depends on the irradiation intensity and wavelength, nanoparticle concentration, and the nanoparticle photothermal conversion efficiency [33][38]. It also depends on the type of the

• the observed LSPR band, increasing both the NIR absorption and the photothermal conversion, which allowed for the elimination of Gram-positive bacteria. In another recent work, the photothermal-triggered effect of phospholipid-coated gold nanorods against P. aeruginosa planktonic and biofilm cultures

• spectrum, is another well-known suitable agent for the NIR photothermal conversion [89]. This material is prepared by assembling polyelectrolyte-stabilized reduced graphene sheets on a quartz surface to efficiently generate localized heating under simulated solar light irradiation, resulting in a >90

Noncontact atomic force microscopy III

• Mehmet Z. Baykara and
• Udo D. Schwarz

Beilstein J. Nanotechnol. 2016, 7, 946–947, doi:10.3762/bjnano.7.86

• particular, latest instrumental advances are highlighted in the form of a new design for a large-area SPM used for electrostatic force measurements, improvement of dynamic cantilever response by the utilization of reflective coatings and photothermal conversion layers, and the use of length extension

Efficiency improvement in the cantilever photothermal excitation method using a photothermal conversion layer

• Natsumi Inada,
• Hitoshi Asakawa,
• Taiki Kobayashi and
• Takeshi Fukuma

Beilstein J. Nanotechnol. 2016, 7, 409–417, doi:10.3762/bjnano.7.36

• improving the photothermal excitation efficiency by coating cantilever backside surface near its fixed end with colloidal graphite as a photothermal conversion (PTC) layer. The excitation efficiency for a standard cantilever of PPP-NCHAuD with a spring constant of ≈40 N/m and a relatively stiff cantilever

• ; dynamic mode; photothermal conversion; photothermal excitation; Introduction Atomic force microscopy (AFM) [1] is an analytical technique to investigate nanoscale surface structures and local physical properties of various samples. Dynamic-mode AFM has attracted considerable interests in various fields

• stiff cantilever and an infrared excitation laser beam. In this study, we aimed to improve the photothermal excitation efficiency with relatively stiff cantilevers using a photothermal conversion (PTC) layer made of colloidal graphite. We have established a procedure with a micromanipulator and glass