A biomimetic approach towards a universal slippery liquid infused surface coating

• Ryan A. Faase,
• Madeleine H. Hummel,
• AnneMarie V. Hasbrook,
• Andrew P. Carpenter and
• Joe E. Baio

Beilstein J. Nanotechnol. 2024, 15, 1376–1389, doi:10.3762/bjnano.15.111

• modification of the PDA film though the formation of a pseudo self-assembled monolayer [19][20]. In this process, molecules that contain thiol groups attach to the newly formed PDA surface via Michael addition [21][22][23]. In this work, we take advantage of PDA to covalently attach fluorinated chains

N-Heterocyclic carbene-based gold etchants

• Robert B. Chevalier,
• Justin Pantano,
• Matthew K. Kiesewetter and
• Jason R. Dwyer

Beilstein J. Nanotechnol. 2023, 14, 865–871, doi:10.3762/bjnano.14.71

• but also the potential for deliberate etching, with the outcome determined by choice of chemically synthesized organic species and solvent. Keywords: gold etchant; microfabrication; N-heterocyclic carbenes; self-assembled monolayer (SAM); thin films; Introduction Self-assembled monolayers (SAMs) are

Silver-based SERS substrates fabricated using a 3D printed microfluidic device

• Phommachith Sonexai,
• Minh Van Nguyen,
• Bui The Huy and
• Yong-Ill Lee

Beilstein J. Nanotechnol. 2023, 14, 793–803, doi:10.3762/bjnano.14.65

• homogeneous results because of the even deposition of the self-assembled monolayer of Ag NPs on the PS substrate. Detection of melamine using PS@Ag SERS substrate SERS spectra of MLM solutions at different concentrations (10−7 to 10−3 M) on the PS@Ag substrates were recorded, as shown in Figure 6a. The Raman

Molecular nanoarchitectonics: unification of nanotechnology and molecular/materials science

• Katsuhiko Ariga

Beilstein J. Nanotechnol. 2023, 14, 434–453, doi:10.3762/bjnano.14.35

• creating a self-assembled monolayer of a diacetylene compound (10,12-nonacosazinoic acid) adsorbed on a graphite surface and biased with a scanning tunneling microscope probe [111]. By positioning the probe at a specific site, the polymerization of the chains was induced within defined small regions, and

Gap-directed chemical lift-off lithographic nanoarchitectonics for arbitrary sub-micrometer patterning

• Chang-Ming Wang,
• Hong-Sheng Chan,
• Chia-Li Liao,
• Che-Wei Chang and
• Wei-Ssu Liao

Beilstein J. Nanotechnol. 2023, 14, 34–44, doi:10.3762/bjnano.14.4

• alkanethiol self-assembled monolayer (SAM) on Au to generate surface patterns that are orders of magnitude smaller than structures on the original elastomer stamp. The smallest achieved feature dimension is 5 nm using a micrometer-scale structured stamp in a chemical lift-off lithography (CLL) process

• -off lithography; gap; self-assembled monolayer; sub-micrometer; surface patterning; Introduction The development of lithographic techniques is crucial to the advancement of the electronics and semiconductor industry, the backbones of modern technology. Advances in photolithography have pushed the

• ][18][19]. Instead of transferring ink molecules from a stamp reservoir, this technique selectively removes alkanethiol molecules from a self-assembled monolayer (SAM) covered flat Au surface. An oxygen-plasma-activated polydimethylsiloxane (PDMS) stamp bearing patterns originating from a silicon

Rapid and sensitive detection of box turtles using an electrochemical DNA biosensor based on a gold/graphene nanocomposite

• Abu Hashem,
• M. A. Motalib Hossain,
• Ab Rahman Marlinda,
• Mohammad Al Mamun,
• Khanom Simarani and
• Mohd Rafie Johan

Beilstein J. Nanotechnol. 2022, 13, 1458–1472, doi:10.3762/bjnano.13.120

• hydrochloride (EDC) were used to covalently link DNA and oligonucleotides to a carboxylate-terminated alkanethiol self-assembled monolayer (SAM) performed on a gold electrode (AuE) [70]. The Lisdat group described a label-free impedimetric sensor for the detection of hybridisation events which is based on short

On the stability of microwave-fabricated SERS substrates – chemical and morphological considerations

• Limin Wang,
• Aisha Adebola Womiloju,
• Christiane Höppener,
• Ulrich S. Schubert and
• Stephanie Hoeppener

Beilstein J. Nanotechnol. 2021, 12, 541–551, doi:10.3762/bjnano.12.44

• coated with a self-assembled monolayer of 4-aminothiophenol (4-ATP), which serves as a defined molecular probe layer to determine the SERS activity of the substrates. Results and Discussion For the performed stability tests, SERS substrates were fabricated by microwave-assisted synthesis in a batch

Fusion of purple membranes triggered by immobilization on carbon nanomembranes

• René Riedel,
• Natalie Frese,
• Fang Yang,
• Martin Wortmann,
• Raphael Dalpke,
• Daniel Rhinow,
• Norbert Hampp and
• Armin Gölzhäuser

Beilstein J. Nanotechnol. 2021, 12, 93–101, doi:10.3762/bjnano.12.8

• electron irradiation-induced cross-linking of a self-assembled monolayer (SAM) of 4′-nitro-1,1′-biphenyl-4-thiol (NBPT) and second, purple membrane (PM) containing genetically modified bacteriorhodopsin (BR) carrying a C-terminal His-tag. The NBPT-CNM was further modified to carry nitrilotriacetic acid

Growth of a self-assembled monolayer decoupled from the substrate: nucleation on-command using buffer layers

• Robby Reynaerts,
• Kunal S. Mali and
• Steven De Feyter

Beilstein J. Nanotechnol. 2020, 11, 1291–1302, doi:10.3762/bjnano.11.113

• solution–solid interface. One of the ways to influence network formation at this interface is to physically decouple the self-assembled monolayer from the underlying substrate thereby removing the influence of the substrate lattice, if any. Here we show a systematic exploration of self-assembly of a

• hypothesize that in the case of alkoxybenzoic acids, a tendency to form close-packed networks supersedes other factors. The buffer layer however provided a unique platform for self-assembly experiments where the nucleation, growth and ripening of the self-assembled monolayer could be monitored in a more

Mobility of charge carriers in self-assembled monolayers

• Zhihua Fu,
• Tatjana Ladnorg,
• Hartmut Gliemann,
• Alexander Welle,
• Asif Bashir,
• Michael Rohwerder,
• Qiang Zhang,
• Björn Schüpbach,
• Andreas Terfort and
• Christof Wöll

Beilstein J. Nanotechnol. 2019, 10, 2449–2458, doi:10.3762/bjnano.10.235

• the determination of mobilities in macroscopic samples. Keywords: conducting atomic force microscopy; lateral charge transport; nanografting; organic semiconductor; self-assembled monolayer; Introduction Charge transport in organic semiconductors plays a central role in the field of molecular

Multiwalled carbon nanotube based aromatic volatile organic compound sensor: sensitivity enhancement through 1-hexadecanethiol functionalisation

• Nadra Bohli,
• Meryem Belkilani,
• Juan Casanova-Chafer,
• Eduard Llobet and
• Adnane Abdelghani

Beilstein J. Nanotechnol. 2019, 10, 2364–2373, doi:10.3762/bjnano.10.227

• temperature toluene and benzene sensor based on multiwall carbon nanotubes (MWCNTs) decorated with gold nanoparticles and functionalised with a long-chain thiol self-assembled monolayer, 1-hexadecanethiol (HDT). High-resolution transmission electron microscopy (HRTEM) and Fourier transform infrared

• vapours. Conclusion In this work, we studied the detection of aromatic vapours in ppm range with a sensor composed of HDT-functionalised gold-decorated multiwall carbon nanotubes. The studied self-assembled monolayer, with its CH3 functional group, increased the sensor sensitivity (up to 17 times) and

• -assembled monolayer of 1-hexadecanethiol (HDT). The sensor functionalisation was undertaken through its immersion for 4 hours at room temperature in a solution of 5 mM of HDT diluted in ethanol. The sensor was then rinsed with ethanol to wash off the unbound thiol molecules and dried under a nitrogen stream

Adsorption and desorption of self-assembled L-cysteine monolayers on nanoporous gold monitored by in situ resistometry

• Elisabeth Hengge,
• Eva-Maria Steyskal,
• Rupert Bachler,
• Alexander Dennig,
• Bernd Nidetzky and
• Roland Würschum

Beilstein J. Nanotechnol. 2019, 10, 2275–2279, doi:10.3762/bjnano.10.219

• resistometry. From the desorption peak related to the (111) surface of the structure, which is associated with a resistance change of 4.8%, an initial surface coverage of 0.48 monolayers of cysteine could be estimated. Keywords: L-cysteine; in situ resistometry; nanoporous gold; self-assembled monolayer (SAM

Review of advanced sensor devices employing nanoarchitectonics concepts

• Katsuhiko Ariga,
• Tatsuyuki Makita,
• Masato Ito,
• Taizo Mori,
• Shun Watanabe and
• Jun Takeya

Beilstein J. Nanotechnol. 2019, 10, 2014–2030, doi:10.3762/bjnano.10.198

• monolayers [133][134], Langmuir–Blodgett films [135][136][137], and layer-by-layer assembly [138][139][140][141] on sensors and related devices is a key nanoarchitectonics step for sensor fabrication. For example, Furusawa et al. immobilized nickel-nitrilotriacetic acid within a self-assembled monolayer on

• an organic field-effect transistor, which was used for the sensitive detection of small organic acid molecules, such as citric acid [142]. Hattori and co-workers fabricated an ATP/ADP sensitive image sensor by immobilization of apyrase as a self-assembled monolayer on a 128 × 128 pixel array

Materials nanoarchitectonics at two-dimensional liquid interfaces

• Katsuhiko Ariga,
• Michio Matsumoto,
• Taizo Mori and
• Lok Kumar Shrestha

Beilstein J. Nanotechnol. 2019, 10, 1559–1587, doi:10.3762/bjnano.10.153

• -exchangers, and indicative dyes were incorporated in an optode system detecting caesium ions in tap water and seawater [80]. Photo-controllable molecular devices were successfully fabricated using two-dimensional self-assembled monolayer technology as recently reviewed by Suda [81]. Hierarchic functional

Hydrophilicity and carbon chain length effects on the gas sensing properties of chemoresistive, self-assembled monolayer carbon nanotube sensors

• Juan Casanova-Cháfer,
• Carla Bittencourt and
• Eduard Llobet

Beilstein J. Nanotechnol. 2019, 10, 565–577, doi:10.3762/bjnano.10.58

• ); self-assembled monolayer (SAM); thiol; Introduction Carbon nanotubes were first observed by Sumio Iijima in 1991 [1] and since then, this nanostructure has been widely used in chemoresistive gas sensors [2][3][4][5] due to the possibility to engineer its sensitivity towards chemicals present in a

Self-assembled quasi-hexagonal arrays of gold nanoparticles with small gaps for surface-enhanced Raman spectroscopy

• Emre Gürdal,
• Simon Dickreuter,
• Fatima Noureddine,
• Pascal Bieschke,
• Dieter P. Kern and
• Monika Fleischer

Beilstein J. Nanotechnol. 2018, 9, 1977–1985, doi:10.3762/bjnano.9.188

• features. To measure the SERS signal, the gold nanoparticles were covered with a self-assembled monolayer of 4-MBA. Because the thiol-group of the 4-MBA molecules has a very high affinity for gold [27], and the samples were rinsed thoroughly with ethanol to remove any unbound molecules, we can assume that

Electro-optical interfacial effects on a graphene/π-conjugated organic semiconductor hybrid system

• Karolline A. S. Araujo,
• Luiz A. Cury,
• Matheus J. S. Matos,
• Thales F. D. Fernandes,
• Luiz G. Cançado and
• Bernardo R. A. Neves

Beilstein J. Nanotechnol. 2018, 9, 963–974, doi:10.3762/bjnano.9.90

• probe microscopy, optical spectroscopy (photoluminescence and Raman) and ab initio calculations. The graphene/RA interaction induces the formation of a well-organized π-conjugated self-assembled monolayer (SAM) at the interface. Such structural organization leads to the high optical emission efficiency

• interfacial effects. Scanning probe microscopy (SPM) and Raman scattering experiments, along with first-principles calculations, reveal the presence of a highly ordered RA self-assembled monolayer atop graphene and graphite. The electro-optical characterization of the hybrid system discloses interfacial

• and it was not available in the present work. Therefore, Figure 1a shows a graphite microplate partially covered by an ultrathin (0.4 nm-thick) RA self-assembled monolayer. (See Figure S2a in Supporting Information File 1 for a typical topographic image of a pristine graphite microplate). The spatial

Wafer-scale bioactive substrate patterning by chemical lift-off lithography

• Chong-You Chen,
• Chang-Ming Wang,
• Hsiang-Hua Li,
• Hong-Hseng Chan and
• Wei-Ssu Liao

Beilstein J. Nanotechnol. 2018, 9, 311–320, doi:10.3762/bjnano.9.31

• biological species recognition with minimum nonspecific attachment. Herein, a straightforward approach utilizing chemical lift-off lithography to create a diluted self-assembled monolayer matrix for anchoring diverse biological probes is introduced. The strategy encompasses convenient operation, well-tunable

• pattern feature and size, large-area fabrication, high resolution and fidelity control, and the ability to functionalize versatile bioarrays. With the interface-contact-induced reaction, a preformed alkanethiol self-assembled monolayer on a Au surface is ruptured and a unique defect-rich diluted matrix is

• lift-off lithography; patterning; self-assembled monolayer; Introduction Patterning on the micro- to nanoscale plays a key role in modern scientific and engineering research fields. Particularly, the creation of bioactive surfaces with well-defined geometries has drawn lots of attention due to its

A robust AFM-based method for locally measuring the elasticity of samples

• Alexandre Bubendorf,
• Stefan Walheim,
• Thomas Schimmel and
• Ernst Meyer

Beilstein J. Nanotechnol. 2018, 9, 1–10, doi:10.3762/bjnano.9.1

• -density polyethylene) and a self-assembled monolayer of 1H,1H,2H,2H-perfluorodecyltrichlorosilane (FDTS) on a silicon oxide substrate perforated with circular holes prepared by polymer blend lithography. For all samples the relation was evidenced by recording Δf1, Δf2 and FN as a function of the Z

• first flexural modes of the cantilever in contact were excited with the amplitudes A1 = 22 mV and A2 = 5 mV for all samples. Samples and measurement conditions Three different polymers (polystyrene (PS), polypropylene (PP) and linear low-density polyethylene (LLDPE)) and a self-assembled monolayer (SAM

Patterning of supported gold monolayers via chemical lift-off lithography

• Liane S. Slaughter,
• Kevin M. Cheung,
• Sami Kaappa,
• Huan H. Cao,
• Qing Yang,
• Thomas D. Young,
• Andrew C. Serino,
• Sami Malola,
• Jana M. Olson,
• Stephan Link,
• Hannu Häkkinen,
• Anne M. Andrews and
• Paul S. Weiss

Beilstein J. Nanotechnol. 2017, 8, 2648–2661, doi:10.3762/bjnano.8.265

• recessed circular features and a preformed self-assembled monolayer of mercaptoundecanol. Methyl-terminated alkanethiol molecules were then inserted into the contact regions, resulting in a self-assembled monolayer with patterned terminal functionalities. Performing a second round of CLL using this

Amplified cross-linking efficiency of self-assembled monolayers through targeted dissociative electron attachment for the production of carbon nanomembranes

• Sascha Koch,
• Christopher D. Kaiser,
• Paul Penner,
• Michael Barclay,
• Lena Frommeyer,
• Daniel Emmrich,
• Patrick Stohmann,
• Tarek Abu-Husein,
• Andreas Terfort,
• D. Howard Fairbrother,
• Oddur Ingólfsson and
• Armin Gölzhäuser

Beilstein J. Nanotechnol. 2017, 8, 2562–2571, doi:10.3762/bjnano.8.256

• )), implying that 2-I-BPT cross-links the fastest, followed by 2-Br-BPT, 2-Cl-BPT and finally BPT. Helium ion microscope (HIM) image of a transferred carbon nanomembrane (CNM) made using 3 min (1.8 mC/cm2) of electron irradiation (50 eV) on a 2-I-BPT self-assembled monolayer. (a) 2500 × 2500 µm HIM image of

Refractive index sensing and surface-enhanced Raman spectroscopy using silver–gold layered bimetallic plasmonic crystals

• Somi Kang,
• Sean E. Lehman,
• Matthew V. Schulmerich,
• An-Phong Le,
• Tae-woo Lee,
• Stephen K. Gray,
• Rohit Bhargava and
• Ralph G. Nuzzo

Beilstein J. Nanotechnol. 2017, 8, 2492–2503, doi:10.3762/bjnano.8.249

• ) measurements A self-assembled monolayer of benzenethiol on top of the quasi-3D PCs was prepared by immersing them in a 15 mM benzenethiol ethanolic solution for 12 h, rinsing thoroughly with ethanol, and then drying with a stream of nitrogen gas. SERS measurements were made using a SENTERRA dispersive Raman

Tailoring the nanoscale morphology of HKUST-1 thin films via codeposition and seeded growth

• Landon J. Brower,
• Lauren K. Gentry,
• Amanda L. Napier and
• Mary E. Anderson

Beilstein J. Nanotechnol. 2017, 8, 2307–2314, doi:10.3762/bjnano.8.230

• are advantageous for applications in which the MOF pores are utilized for analyte storage. Layer-by-layer (LBL) solution-phase deposition has been studied for the HKUST-1 system, which consists of Cu(II) ions and trimesic acid (TMA) [10], deposited onto a self-assembled monolayer (SAM) on Au

• : HKUST-1 surMOF films were fabricated by the codeposition of TMA and copper ions onto a gold substrate previously functionalized by a self-assembled monolayer (SAM) that consisted of MHDA. The gold substrate was first fully immersed in approximately 10 mL of a 1 mM MHDA ethanol solution for 1 h, which

Nanotopographical control of surfaces using chemical vapor deposition processes

• Meike Koenig and
• Joerg Lahann

Beilstein J. Nanotechnol. 2017, 8, 1250–1256, doi:10.3762/bjnano.8.126

• feed. Trujillo et al. produced polymeric nanostructures using colloidal lithography [12]. In this technique, two-dimensional self-assembled monolayer (SAM) arrays of colloidal nanoparticles serve as lithographic templates for “nanobowl” patterns in an initiated chemical vapor deposition (iCVD) process

The integration of graphene into microelectronic devices

• Guenther Ruhl,
• Sebastian Wittmann,
• Matthias Koenig and
• Daniel Neumaier

Beilstein J. Nanotechnol. 2017, 8, 1056–1064, doi:10.3762/bjnano.8.107

• grain boundaries through a copper film to the underlying substrate [30]. As there is no significant solubility of carbon in copper, the film formation is expected to be very inhomogeneous. Alternatively Cu is used as catalytic material to convert a self-assembled monolayer as carbon source at the Cu