The effect of age on the attachment ability of stick insects (Phasmatodea)

• Marie Grote,
• Stanislav N. Gorb and
• Thies H. Büscher

Beilstein J. Nanotechnol. 2024, 15, 867–883, doi:10.3762/bjnano.15.72

• 1 µm and 12 µm roughness according to Büscher and Gorb [33] to test for differences in the attachment performance on different degrees of surface roughness during ageing. This range of substrate roughness was selected to test for different aspects of the functionality of the attachment pads without

• animals to pull-off forces. In younger adult animals, traction forces were significantly influenced by the substrate roughness (Kruskal–Wallis ANOVA on ranks, H = 72.314, d.f. = 5, Nyoung = 15, Nold = 14, p ≤ 0.001). Similar to the pull-off forces, the highest values were obtained on glass (122.31 ± 36.48

Comparative analysis of the ultrastructure and adhesive secretion pathways of different smooth attachment pads of the stick insect Medauroidea extradentata (Phasmatodea)

• Julian Thomas,
• Stanislav N. Gorb and
• Thies H. Büscher

Beilstein J. Nanotechnol. 2024, 15, 612–630, doi:10.3762/bjnano.15.52

• that are adapted to attachment through the division of labour by preferably generating more adhesion or friction [5]. Adhesive secretion in the contact zone between the attachment pad and substrate supports the functionality of the pads [15]. The adhesive secretion can fill the gaps in the substrate

• roughness and thereby increase the contact area [14][16][17][18][19]. It can aid in the enhancement of viscous and capillary forces further increasing the attachment strength [9][14][20][21][22][23][24]. The adhesive secretion can be essential for the self-cleaning mechanism by binding smaller contamination

Physical constraints lead to parallel evolution of micro- and nanostructures of animal adhesive pads: a review

• Thies H. Büscher and
• Stanislav N. Gorb

Beilstein J. Nanotechnol. 2021, 12, 725–743, doi:10.3762/bjnano.12.57

• influence of different factors, such as substrate roughness and pad stiffness, on contact forces, and review the chemical composition of pad fluids, which is an important component of an adhesive function. Attachment systems are omnipresent in animals. We show parallel evolution of attachment structures on

Pull-off and friction forces of micropatterned elastomers on soft substrates: the effects of pattern length scale and stiffness

• Peter van Assenbergh,
• Marike Fokker,
• Julian Langowski,
• Jan van Esch,
• Marleen Kamperman and
• Dimitra Dodou

Beilstein J. Nanotechnol. 2019, 10, 79–94, doi:10.3762/bjnano.10.8

• . The decreased Eeff of a fibrillar geometry also leads to decreased contact stiffness [11] and higher conformability to substrate roughness [12]. The abovementioned effects of fibrillary geometries can be further enhanced with altering the pillar geometry. For example, Gorb et al. fabricated

• micropillars of 100 μm height and a stem diameter of 60 μm, terminated with a thin (2 μm) disc of 40 μm in diameter [11]. These so-called mushroom-shaped micropillars generated higher pull-off forces than flat-punch micropillars, a phenomenon attributed to a higher adaptability to substrate roughness due to

• microstructure is not considerably lower than that of coarser microstructure [14]. Greiner et al. found that with increasing aspect ratio of micropattern features, their compliance increases, resulting in a better conformability to substrate roughness [20]. Hierarchical geometries, that is, architectures with

A comparison of tarsal morphology and traction force in the two burying beetles Nicrophorus nepalensis and Nicrophorus vespilloides (Coleoptera, Silphidae)

• Liesa Schnee,
• Benjamin Sampalla,
• Josef K. Müller and
• Oliver Betz

Beilstein J. Nanotechnol. 2019, 10, 47–61, doi:10.3762/bjnano.10.5

• surfaces (cf. Figure 3 and Figure 4) indicating that this surface represents a critical (friction reducing) surface asperity not only for the claws, but also for the tenent setae. This means that, at certain ranges of substrate roughness, attachment organs show a minimum of adhesion. Such a critical range

Contact splitting in dry adhesion and friction: reducing the influence of roughness

• Jae-Kang Kim and
• Michael Varenberg

Beilstein J. Nanotechnol. 2019, 10, 1–8, doi:10.3762/bjnano.10.1

• lamella length (low-level-hierarchy attachment element) and inter-lamella spacing, and if the substrate roughness is comparable to the lateral dimension of a single spatula (high-level-hierarchy attachment element) [18][19]. Several studies performed with artificial fibrillar structures reported that

Parylene C as a versatile dielectric material for organic field-effect transistors

• Tomasz Marszalek,
• Maciej Gazicki-Lipman and
• Jacek Ulanski

Beilstein J. Nanotechnol. 2017, 8, 1532–1545, doi:10.3762/bjnano.8.155

• ) semiconducting films, obtained by thermal evaporation [47] or from solution [48] is insensitive to the substrate roughness. However, in thin monolayer semiconductor films the surface roughness significantly influences the charge-carrier transport [49]. This is due to the fact that charge-carrier transport in the

The integration of graphene into microelectronic devices

• Guenther Ruhl,
• Sebastian Wittmann,
• Matthias Koenig and
• Daniel Neumaier

Beilstein J. Nanotechnol. 2017, 8, 1056–1064, doi:10.3762/bjnano.8.107

• ]. 3.2 Nanostrain Another type of substrate–graphene interaction is the introduction of local strain induced by substrate roughness on the nanometer scale. The resulting deformation of graphene leads to degradation of the charge carrier mobility. Graphene on flat surfaces like h-BN and SiO2 show a

Surface roughness rather than surface chemistry essentially affects insect adhesion

• Matt W. England,
• Tomoya Sato,
• Makoto Yagihashi,
• Atsushi Hozumi,
• Stanislav N. Gorb and
• Elena V. Gorb

Beilstein J. Nanotechnol. 2016, 7, 1471–1479, doi:10.3762/bjnano.7.139

• different extents. In contrast, the fact that insect attachment is very sensitive to the substrate roughness is well-known, due to numerous previous studies on the subject [16][19][20][21][23][29][33][38]. Particularly strong reductions have been observed on textured substrates with Rrms in the range of 0.1

• summary, we have clearly shown that the insect anti-adhesive effect is due to both surface chemistry and texture, but it is primarily driven by the substrate roughness, and less by surface chemistry. It seems to be a universal effect for both dry [40][41] and wet (but not glue-mediated) [23][29][38][42

Numerical investigation of the effect of substrate surface roughness on the performance of zigzag graphene nanoribbon field effect transistors symmetrically doped with BN

• Majid Sanaeepur,
• Arash Yazdanpanah Goharrizi and
• Mohammad Javad Sharifi

Beilstein J. Nanotechnol. 2014, 5, 1569–1574, doi:10.3762/bjnano.5.168

• graphene nanoribbon that is symmetrically doped with boron nitride (BN) as a channel material, is numerically studied for the first time. The device merit for digital applications is investigated in terms of the on-, the off- and the on/off-current ratio. Due to the strong effect of the substrate roughness

• ; substrate roughness; zigzag graphene nanoribbon field effect transistor (ZGNRFET); Introduction Field effect transistors (FETs) with a 10 nm gate length are stipulated by the International Technology Roadmap for Semiconductors (ITRS) for the year 2020 [1]. Regarding the Si scaling limits, it is obvious

Exploring the retention properties of CaF₂ nanoparticles as possible additives for dental care application with tapping-mode atomic force microscope in liquid

• Matthias Wasem,
• Joachim Köser,
• Sylvia Hess,
• Enrico Gnecco and
• Ernst Meyer

Beilstein J. Nanotechnol. 2014, 5, 36–43, doi:10.3762/bjnano.5.4

• substrate roughness, morphology and size of the particles. Keywords: AM-AFM in liquid; nanodentistry; nanoparticles; Introduction Amplitude-modulation atomic force microscopy (AM-AFM), also known as tapping mode AFM, is a variant of scanning probe microscopy. In this dynamic technique imaging is achieved

• , the tooth enamel, which was mechanically polished before use, had a mean square roughness (RMS) ranging between 3.4–4.0 nm. The higher substrate roughness of enamel would lower the particle–substrate contact area. This has been experimentally verified in earlier studies by measuring the pull-off force

• explained in terms of less contacting asperities in the substrate–particles interface and hence less adhesion force acting between them. Our experiments show the exact opposite behavior, at a higher substrate roughness we observe a higher retention of the nanoparticles. We explain this in terms of the

Routes to rupture and folding of graphene on rough 6H-SiC(0001) and their identification

• M. Temmen,
• O. Ochedowski,
• B. Kleine Bussmann,
• M. Schleberger,
• M. Reichling and
• T. R. J. Bollmann

Beilstein J. Nanotechnol. 2013, 4, 625–631, doi:10.3762/bjnano.4.69

• sheet we find a roughness that is about 60% of the substrate roughness, indicating that graphene adapts to its underlying substrate closely but removes part of its roughness. Methods for rupture and folding of graphene To create FLG including layers with twisted stacking, the exfoliated graphene is

Micro- and nanoscale electrical characterization of large-area graphene transferred to functional substrates

• Gabriele Fisichella,
• Salvatore Di Franco,
• Patrick Fiorenza,
• Raffaella Lo Nigro,
• Fabrizio Roccaforte,
• Cristina Tudisco,
• Guido G. Condorelli,
• Nicolò Piluso,
• Noemi Spartà,
• Stella Lo Verso,
• Corrado Accardi,
• Cristina Tringali,
• Sebastiano Ravesi and
• Filippo Giannazzo

Beilstein J. Nanotechnol. 2013, 4, 234–242, doi:10.3762/bjnano.4.24

• can influence the surface adhesion between graphene and the substrate, including the substrate roughness and the surface energy. Though a complete understanding of this issue has not yet been achieved, it can be argued that, due to the inherent hydrophobic character of graphene, the adhesion of large

Controlled deposition and combing of DNA across lithographically defined patterns on silicon

• Zeinab Esmail Nazari and
• Leonid Gurevich

Beilstein J. Nanotechnol. 2013, 4, 72–76, doi:10.3762/bjnano.4.8

• of N-octyldimethylchlorosilane on silicon substrates used in this study was a key step to achieve hydrophobic and clean surfaces, ideal for deposition and combing of DNA. This procedure did not increase substrate roughness (average RMS ≈ 0.25 nm on modified substrates versus average RMS ≈ 0.3 nm

Modeling noncontact atomic force microscopy resolution on corrugated surfaces

• Kristen M. Burson,
• Mahito Yamamoto and
• William G. Cullen

Beilstein J. Nanotechnol. 2012, 3, 230–237, doi:10.3762/bjnano.3.26

• relationship between the substrate and the graphene topography for SiO2. Specifically, the higher-resolution measurement of the substrate roughness allowed a quantitative analysis based on theories of membrane adhesion. It also brought to the fore the experimental difficulty of obtaining high-resolution AFM

Electron-beam patterned self-assembled monolayers as templates for Cu electrodeposition and lift-off

• Zhe She,
• Andrea DiFalco,
• Georg Hähner and
• Manfred Buck

Beilstein J. Nanotechnol. 2012, 3, 101–113, doi:10.3762/bjnano.3.11

• small-scale patterns. Even though the substrate roughness plays a crucial role for the topography of the film, there are still contributions from additional factors that have yet to be elucidated. One obvious point is a further optimisation of the deposition parameters with regard to the mutual