Total synthesis of insect sex pheromones: recent improvements based on iron-mediated cross-coupling chemistry

• Eric Gayon,
• Guillaume Lefèvre,
• Olivier Guerret,
• Adrien Tintar and
• Pablo Chourreu

Beilstein J. Org. Chem. 2023, 19, 158–166, doi:10.3762/bjoc.19.15

• ) European grapevine moth, c) horse-chestnut leaf miner) involving a key alkyl–alkenyl iron-mediated cross-coupling between a dienol phosphate and an α,ω-difunctionalized Grignard reagent. Cross-coupling of alkyl Grignard reagents with a) alkenyl or b) aryl halides involving EtOMgCl as additive. Total

• developed an eco-friendlier, and easily scalable iron-catalyzed cross-coupling method between alkyl Grignard reagents and Csp2 (alkenyl or aryl) organic halides [31]. By combining a catalytic charge of FeCl3 with alkoxide magnesium salts such as EtOMgCl in THF, complete conversion of the alkenyl/aryl

• halides was observed and the cross-coupling products were afforded in good to excellent yields (Scheme 5). Moreover, this reaction can also be carried out at the gram scale (up to 50 mmol for alkyl–alkenyl coupling reactions, up to 10 mmol for alkyl–aryl couplings). Alkoxide salts, such as EtOMgCl, are

An alternative C–P cross-coupling route for the synthesis of novel V-shaped aryldiphosphonic acids

• Stephen J. I. Shearan,
• Enrico Andreoli and
• Marco Taddei

Beilstein J. Org. Chem. 2022, 18, 1518–1523, doi:10.3762/bjoc.18.160

• aryl halides and trialkyl phosphites [23]. Some of the most studied C–P coupling reactions involving aryl substrates are those employing catalysts, which are required in order to lower the energy barrier of the reaction and overcome the poor reactivity between aryl halides and trialkyl phosphites [24

Dissecting Mechanochemistry III

• Lars Borchardt and
• José G. Hernández

Beilstein J. Org. Chem. 2022, 18, 1454–1456, doi:10.3762/bjoc.18.150

• halides as substrates in multiple reactions. For instance, within this Thematic Issue, the synthetic relevance of aryl halides was evidenced during the development of a protocol for the solid-state palladium-catalyzed borylation reported by Kubota, Ito, and co-workers (Scheme 2) [6]. Moreover, Štrbac and

• . Mechanochemical palladium-catalyzed borylation protocol of aryl halides. 1,2-Debromination of polycyclic imides, followed by in situ trapping of the dienophile by several dienes. Synthesis of g-h-PCN from sodium phosphide and trichloroheptazine mediated by mechanochemistry. Mechanochemical intra- and

Heterogeneous metallaphotoredox catalysis in a continuous-flow packed-bed reactor

• Wei-Hsin Hsu,
• Susanne Reischauer,
• Peter H. Seeberger,
• Bartholomäus Pieber and
• Dario Cambié

Beilstein J. Org. Chem. 2022, 18, 1123–1130, doi:10.3762/bjoc.18.115

• (catalyst) separation in one step. The use of a packed bed simplifies the translation of optimized batch reaction conditions to continuous flow, as the only components present in the reaction mixture are the substrate and a base. The metallaphotoredox cross-coupling of sulfinates with aryl halides was used

• light-mediated carbon–heteroatom cross-couplings of sodium sulfinates, carboxylic acids and sulphonamides with aryl halides (Figure 2) [28]. Although recyclable, batch reactions are characterized by long reaction times (24 h). Here, we present a detailed investigation of a continuous-flow strategy for

Automated grindstone chemistry: a simple and facile way for PEG-assisted stoichiometry-controlled halogenation of phenols and anilines using N-halosuccinimides

• Dharmendra Das,
• Akhil A. Bhosle,
• Amrita Chatterjee and
• Mainak Banerjee

Beilstein J. Org. Chem. 2022, 18, 999–1008, doi:10.3762/bjoc.18.100

• requires the use of a solid acid catalyst [52], apart from the use of high-cost, high-end milling equipment which limits to laboratory scale only. Therefore, developing an operationally simple, environmentally benign protocol, potentially useful for the batch-scale synthesis of aryl halides is highly

• reaction time, and mild reaction conditions are a few noticeable merits of this environmentally sustainable mechanochemical protocol. Keywords: automated grinding; chemoselectivity; mechanochemistry; N-bromosuccinimide; PEG-400; regioselectivity; stoichiometry-controlled halogenation; Introduction Aryl

• halides are valuable compounds with potent bioactivities [1][2][3][4][5] (Figure 1) and are utilized as crucial precursors for various metal-catalyzed cross-coupling reactions [6][7][8][9]. They are frequently used as synthetic intermediates in several value-added syntheses of natural products

Palladium-catalyzed solid-state borylation of aryl halides using mechanochemistry

• Koji Kubota,
• Emiru Baba,
• Tamae Seo,
• Tatsuo Ishiyama and
• Hajime Ito

Beilstein J. Org. Chem. 2022, 18, 855–862, doi:10.3762/bjoc.18.86

• , Japan 10.3762/bjoc.18.86 Abstract This study describes the solid-state palladium-catalyzed cross-coupling between aryl halides and bis(pinacolato)diboron using ball milling. The reactions were completed within 10 min for most aryl halides to afford a variety of synthetically useful arylboronates in

• organic materials, typically through Suzuki–Miyaura coupling [1][2][3][4][5][6][7]. The palladium-catalyzed boryl substitution of aryl halides with boron reagents, termed Miyaura–Ishiyama borylation, is an efficient method for synthesizing arylboronates with high functional group compatibility [8][9][10

• ][11][12][13][14]. To date, many palladium-based catalytic systems in solution for the borylation of aryl halides have been reported [8][9][10][11][12][13][14]. However, these solution-based reactions usually require long reaction times and significant amounts of dry and degassed organic solvents

Recent developments and trends in the iron- and cobalt-catalyzed Sonogashira reactions

• Surendran Amrutha,
• Sankaran Radhika and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 262–285, doi:10.3762/bjoc.18.31

• , recyclable, and selective for the coupling between aryl halides and phenylacetylene in PEG as the solvent (Scheme 22). The effect of various reaction parameters such as solvent, base, temperature, and catalyst loading was assessed by the model reaction between bromobenzene and phenylacetylene. Optimization

• studies revealed PEG-200 and K3PO4 as suitable solvent and base, respectively. Aryl halides with electron-donating and electron-withdrawing groups afforded the corresponding products in good yields with 0.15 mmol of catalyst in PEG at 60 °C. A three-component coupling of alkyne with a heterogeneous

• (Scheme 25) [38]. The coupling products by reaction of phenylacetylene and various aryl halides were obtained in moderate to good yields in the presence of this green catalyst with 4 equivalents of KOH as the base in DMSO at 140 °C. Without any decrease in the catalytic activity, the catalyst could be

Chemoselective N-acylation of indoles using thioesters as acyl source

• Tianri Du,
• Xiangmu Wei,
• Honghong Xu,
• Xin Zhang,
• Ruiru Fang,
• Zheng Yuan,
• Zhi Liang and
• Yahui Li

Beilstein J. Org. Chem. 2022, 18, 89–94, doi:10.3762/bjoc.18.9

• transthioesterification of aryl halides for the synthesis of thioethers and thioesters [17] (Scheme 1, C). In addition, we also used this reagent to trap alkylcopper(I) intermediates and to form C−S bonds [18]. To the best of our knowledge, thioesters have not been developed as indole N-amidation reagent. Based on our

Selective sulfonylation and isonitrilation of para-quinone methides employing TosMIC as a source of sulfonyl group or isonitrile group

• Chuanhua Qu,
• Run Huang,
• Yong Li,
• Tong Liu,
• Yuan Chen and
• Guiting Song

Beilstein J. Org. Chem. 2021, 17, 2822–2831, doi:10.3762/bjoc.17.193

• sulfones is a valuable and appealing task in synthetic chemistry. Traditionally, diarylmethyl sulfones are synthesized by transition-metal-catalyzed deoxy C–S bond-coupling reaction of sodium arylsulfinates with diarylmethanols [11], C–H functionalization of alkyl sulfones with aryl halides [12], and via a

Visible-light-mediated copper photocatalysis for organic syntheses

• Yajing Zhang,
• Qian Wang,
• Zongsheng Yan,
• Donglai Ma and
• Yuguang Zheng

Beilstein J. Org. Chem. 2021, 17, 2520–2542, doi:10.3762/bjoc.17.169

• -catalyzed coupling reactions of terminal alkynes was published by Hwang and co-worker. In 2012, they [65] achieved a photoinitiated Sonogashira reaction using aryl halides (bromides and iodides) 20 and aryl- or alkylacetylenes 19. In control experiments, the replacement of the copper salt with palladium

• Bissember [91]. In 2013, Peters’ group [86] established the copper-catalyzed C–S cross-coupling between thiols and aryl halides. The mechanistic studies revealed that the reaction runs with the inexpensive precatalyst (CuI) and no ligand co-additive is necessary. In 2014, the same group [85] reported the

• with aryl iodides to generate intermediate D, which then undergoes reductive elimination to generate the desired products (Scheme 23). In 2017, Evano’s group [55] established a photoinduced, copper-catalyzed C–C cross-coupling of aryl halides, and heteroarenes. The cyclization of N-allyl-o-iodoanilines

Photoredox catalysis in nickel-catalyzed C–H functionalization

• Lusina Mantry,
• Rajaram Maayuri,
• Vikash Kumar and
• Parthasarathy Gandeepan

Beilstein J. Org. Chem. 2021, 17, 2209–2259, doi:10.3762/bjoc.17.143

• , MacMillan and co-workers demonstrated an inspiring C(sp3)‒H arylation of dimethylaniline (1a) with a variety of aryl halides using the photoredox nickel catalysis [53]. Here, the combination of the iridium photocatalyst Ir[dF(CF3)ppy]2(dtbbpy)PF6 and the commercially available nickel catalyst NiCl2·glyme

• that the oxidative addition of the nickel(0) species 10-VII to aryl bromide 3 and subsequent steps to produce nickel(III) intermediate 10-IX could not be ruled out. The König group discovered that the arylation of α-amino C(sp3)–H bonds could be realized with aryl halides using mesoporous graphitic

Catalyzed and uncatalyzed procedures for the syntheses of isomeric covalent multi-indolyl hetero non-metallides: an account

• Ranadeep Talukdar

Beilstein J. Org. Chem. 2021, 17, 2102–2122, doi:10.3762/bjoc.17.137

• with 5-iodoindole (182) in the presence of thiourea and a recyclable CuO nanoparticle catalyst (Scheme 26) [116]. This heterogeneous catalysis strategy bypasses the use of unpleasant aryl thiols, which are generally coupled with other aryl halides in the presence of transition-metal catalysts for

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• reductive elimination occurs in the presence of base to achieve the desired product 119 (Scheme 36) [59]. Direct arylation of disubstituted triazoles 123 with aryl halides 124 using a Pd/C catalyst under solvent-free conditions to give fully decorated triazoles 125 was reported by Farinola et al. Different

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

Synthetic reactions driven by electron-donor–acceptor (EDA) complexes

• Zhonglie Yang,
• Yutong Liu,
• Kun Cao,
• Xiaobin Zhang,
• Hezhong Jiang and
• Jiahong Li

Beilstein J. Org. Chem. 2021, 17, 771–799, doi:10.3762/bjoc.17.67

• additive to give corresponding thiophene radical 76 and aniline radical cation under irradiation with light. Then, 76 reacted with 73, giving rise to corresponding radical 77. Finally, product 74 was given via hydrogen atom transfer (Scheme 26). In contrast to (hetero)aryl halides with indispensable

• medicinal value at ambient temperature, which has a wide range of substrates, including various (hetero)aryl halides and substituted oxindoles. In 2019, Gilmour and colleagues [12] transformed the classical Stetter reaction into a radical approach, solving the long-standing problem of chemical selectivity

• between radicals was carried out, affording thioether derivative 132 (Scheme 46). It has been proved by UV–vis spectroscopy and TDDFT calculations that the EDA complex was formed between an electron-rich mercaptan anion and electron-deficient aryl halides. Most importantly, this approach can be

Novel library synthesis of 3,4-disubstituted pyridin-2(1H)-ones via cleavage of pyridine-2-oxy-7-azabenzotriazole ethers under ionic hydrogenation conditions at room temperature

• Romain Pierre,
• Anne Brethon,
• Sylvain A. Jacques,
• Aurélie Blond,
• Sandrine Chambon,
• Sandrine Talano,
• Catherine Raffin,
• Branislav Musicki,
• Claire Bouix-Peter,
• Loic Tomas,
• Gilles Ouvry,
• Rémy Morgentin,
• Laurent F. Hennequin and
• Craig S. Harris

Beilstein J. Org. Chem. 2021, 17, 156–165, doi:10.3762/bjoc.17.16

• . Finally, we turned out attention to transition metal-catalyzed formation of phenols from aryl halides [5]. After another round of screening, we successfully applied palladium-catalyzed conditions discovered by the Buchwald group [6], using KOH as the nucleophile and X-Phos as the ligand, to afford 7 in 83

Catalytic trifluoromethylation of iodoarenes by use of 2-trifluoromethylated benzimidazoline as trifluoromethylating reagent

• Tatsuhiro Uchikura,
• Nanami Kamiyama,
• Taisuke Ishikawa and
• Takahiko Akiyama

Beilstein J. Org. Chem. 2020, 16, 2442–2447, doi:10.3762/bjoc.16.198

• ; catalysis; copper; fluorine chemistry; trifluoromethylation; Introduction The introduction of a trifluoromethyl group is one of the most attractive reactions in drug discovery [1][2]. In the past decade, trifluoromethylation reactions of aryl halides in the presence of transition-metal complexes were

• reported [3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21]. CuCF3 is a useful species for the trifluoromethylation of aryl halides and there are a number of precursors of CuCF3 for trifluoromethylation reactions. In contrast, the catalytic generation of CuCF3 was less investigated [15

• , hexafluorobenzene was added as an internal standard and the mixture analyzed by 19F NMR spectroscopy for the calculation of the NMR yield. Then, the crude products were purified by preparative TLC to give pure products 3. Trifluoromethylation of aryl halides. Scope of aryl iodides. Yields determined by 19F NMR

Chan–Evans–Lam N1-(het)arylation and N1-alkеnylation of 4-fluoroalkylpyrimidin-2(1H)-ones

• Viktor M. Tkachuk,
• Oleh O. Lukianov,
• Mykhailo V. Vovk,
• Isabelle Gillaizeau and
• Volodymyr A. Sukach

Beilstein J. Org. Chem. 2020, 16, 2304–2313, doi:10.3762/bjoc.16.191

• promising building blocks for further functionalization, including (het)aryl or alkenyl substitution at the N1 atom. However, direct arylation of 1 with aryl halides under Ullmann reaction conditions is a low-efficiency process giving only complex mixtures. It is likely that the harsh thermal conditions

When metal-catalyzed C–H functionalization meets visible-light photocatalysis

• Lucas Guillemard and
• Joanna Wencel-Delord

Beilstein J. Org. Chem. 2020, 16, 1754–1804, doi:10.3762/bjoc.16.147

Heterogeneous photocatalysis in flow chemical reactors

• Christopher G. Thomson,
• Ai-Lan Lee and
• Filipe Vilela

Beilstein J. Org. Chem. 2020, 16, 1495–1549, doi:10.3762/bjoc.16.125

• photocatalyst for the reduction of aryl halides [193]. The material could undergo consecutive photoinduced electron transfers (ConPET) in which the material enters an excited state and is reduced by a sacrificial electron donor (NEt3). The resulting Zn-PDI radical anion then undergoes a second photon absorption

• to achieve a superreducing electronic excited state capable of reducing stable aryl halides (Figure 14) [193]. More recently, PDI self-assemblies have been reported as efficient HPCats for the hydrogen evolution reaction [194] and degradation of phenol [192]. Another important material design applied

Photocatalysis with organic dyes: facile access to reactive intermediates for synthesis

• Stephanie G. E. Amos,
• Marion Garreau,
• Luca Buzzetti and
• Jerome Waser

Beilstein J. Org. Chem. 2020, 16, 1163–1187, doi:10.3762/bjoc.16.103

• porphyrin [75] and rhodamine 6G (OD14) [76]. Aryl radicals from aryl halides. Aryl halides are generally more difficult to reduce than aryl diazonium salts (Ered < −1.2 V) [77][78]. However, they are more available and bench-stable. Their reduction potential is dependent on the substitution pattern and on

• organic dye-based consecutive photoinduced electron transfer (conPET) strategy for the reduction of various aryl halides in 2014 [81]. As depicted in Scheme 13 (box 1), the conPET mechanism involves a first PET (PET1), where the excited photocatalyst (PC*) is reduced by a sacrificial electron donor D

• a second PET (PET2). With this strategy, the authors could reduce a broad variety of aryl halides 13.1 using N,N-bis(2,6-diisopropylphenyl)perylene-3,4,9,10-bis(dicarboximide), (PDI, OD20) as a conPET photocatalyst for the generation of an aryl radical (box 2). The latter could be hydrogenated or

Synthesis and anticancer activity of bis(2-arylimidazo[1,2-a]pyridin-3-yl) selenides and diselenides: the copper-catalyzed tandem C–H selenation of 2-arylimidazo[1,2-a]pyridine with selenium

• Mio Matsumura,
• Tsutomu Takahashi,
• Hikari Yamauchi,
• Shunsuke Sakuma,
• Yukako Hayashi,
• Tadashi Hyodo,
• Tohru Obata,
• Kentaro Yamaguchi,
• Yasuyuki Fujiwara and
• Shuji Yasuike

Beilstein J. Org. Chem. 2020, 16, 1075–1083, doi:10.3762/bjoc.16.94

• , and aryl halides in the presence of Na2CO3 (2 equiv) using a NiBr2/2,2-bipyridine system [31]. We also developed reactions of imidazopyridines, Se powder, and triarylbismuthanes using a CuI/1,10-phenanthroline catalytic system that did not require a base or an additive [32]. On the other hand, the

Copper-based fluorinated reagents for the synthesis of CF₂R-containing molecules (R ≠ F)

• Louise Ruyet and
• Tatiana Besset

Beilstein J. Org. Chem. 2020, 16, 1051–1065, doi:10.3762/bjoc.16.92

• perfluoroalkylated molecules. Kremlev, Tyrra and co-workers depicted the in situ generation of a CuCF2CF3 species by mixing Zn(CF3)Br·2DMF and CuBr [65], and its application for the functionalization of (hetero)aryl halides (Scheme 14). In the course of their studies to develop stable and well-defined copper

• use in the perfluoroalkylation of (hetero)aryl halides [72]. By mixing t-BuOCu, in situ generated from CuCl and t-BuONa, with 1,10-phenanthroline, followed by a reaction with perfluorocarboxylic acids, four (Phen)2Cu(O2CCF2RF) complexes were synthesized (RF = CF3, CF2CF3, CF2CF2CF3 and CF2CF2CF2CF3

• vinyl bromides and iodides were efficiently achieved in high yields under mild reaction conditions. Noteworthy, the transformation turned out to be functional group tolerant and highly chemo- and stereroselective (Scheme 20). The group of Hu studied the fluoroalkylation of aryl halides. Indeed, a copper

Fluorinated phenylalanines: synthesis and pharmaceutical applications

• Laila F. Awad and
• Mohammed Salah Ayoup

Beilstein J. Org. Chem. 2020, 16, 1022–1050, doi:10.3762/bjoc.16.91

• reported herein different methods for their synthesis. 1.1. Negishi cross coupling of aryl halide and organozinc compounds Jackson and co-workers reported the synthesis of a range of phenylalanine derivatives via Negishi cross-coupling reactions of aryl halides and Zn homoenolates of the protected (R

• )-iodoalanine 2. The reaction was activated using Pd(0) as a catalyst. A palladium-catalyzed cross-coupling reaction between an organozinc iodide and aryl halides offers a convenient method for the direct preparation of protected fluorinated Phe analogues 3. Thus, cross coupling of the protected iodoalanine 2

• and 12b afforded ʟ-4-[sulfono(difluoromethyl)]phenylalanine derivatives 13a and 13b, respectively [39] (Scheme 3). 1.2. Alkylations of fluorinated aryl halides with a chiral auxiliary Alternatively, the coupling of the bis(dimethoxybenzyl)-protected sulfonamide 14, instead of the esters 10a and 10b

Accelerating fragment-based library generation by coupling high-performance photoreactors with benchtop analysis

• Quentin Lefebvre,
• Christophe Salomé and
• Thomas C. Fessard

Beilstein J. Org. Chem. 2020, 16, 982–988, doi:10.3762/bjoc.16.87

• might come from ring opening [20][21]. Conclusion In summary, we have developed a new workflow allowing to efficiently perform photoredox-nickel dual-catalyzed reactions in parallel for fragment-based library generation. We have screened 29 combinations of complex spirocyclic amines and (hetero)aryl

• halides to get an insight into the specific reactivity of these building blocks. The workflow combined a powerful photoreactor with precise and reproducible conditions control with benchtop analytical tools such as TLC–MS and low-field NMR. This enabled the identification of privileged spirocyclic