Enolates ambushed – asymmetric tandem conjugate addition and subsequent enolate trapping with conventional and less traditional electrophiles

• Péter Kisszékelyi and
• Radovan Šebesta

Beilstein J. Org. Chem. 2023, 19, 593–634, doi:10.3762/bjoc.19.44

• of heterocyclic enolates 108 generated from coumarin and chromone [65]. The high enantio- and diastereoselectivity of these transformations were ensured by a Josiphos-type ferrocene ligand. The reaction of chiral metal enolates with onium compounds enabled the installation of structurally attractive

• ferrocene ligands. All types of metal enolates generated via these processes were able to react with Michael acceptors and afforded the corresponding products in good yields. The alkynylation of enolates generated by conjugate addition was described by Teodoro and Silva (Scheme 32) [68]. Even though the

CuAAC-inspired synthesis of 1,2,3-triazole-bridged porphyrin conjugates: an overview

• Dileep Kumar Singh

Beilstein J. Org. Chem. 2023, 19, 349–379, doi:10.3762/bjoc.19.29

• than other copper catalysts, as it provided higher yields of the desired products (Scheme 4). In 2010, Shetti and Ravikanth [28] nicely utilized the "click reaction" approach for the preparation of a series of triazole-bridged porphyrin-ferrocene dyads 37a–d in 48–52% yield by the reaction between two

• clickable subunits, azido-porphyrins 35a–d and alkyne-functionalized ferrocene 36 in the presence of CuI and DIPEA in THF/CH3CN (Scheme 5). Interestingly, among the various copper(I)-catalyzed click reaction conditions, the best yields were obtained when CuI/DIPEA (0.1:1) was used in a THF/CH3CN mixture. In

• a photophysical investigation, a weak interaction was observed between two subunits at ground state in porphyrin-ferrocene dyads. Also, the fluorescence of porphyrin was significantly quenched in porphyrin-ferrocene conjugates due to photoinduced electron transfer from ferrocene to porphyrin

Revisiting the bromination of 3β-hydroxycholest-5-ene with CBr₄/PPh₃ and the subsequent azidolysis of the resulting bromide, disparity in stereochemical behavior

• Christian Schumacher,
• Jas S. Ward,
• Kari Rissanen,
• Carsten Bolm and
• Mohamed Ramadan El Sayed Aly

Beilstein J. Org. Chem. 2023, 19, 91–99, doi:10.3762/bjoc.19.9

• studies, one of us (M. R. E. A.) felt intrigued by the potential of chemical hybridization of cholesterol through simple connections of pharmacophores including sugars, chalcones, quinolone, theophylline, and ferrocene using click chemistry [9][10][11]. Following this strategy, cholesterol was

Organophosphorus chemistry: from model to application

• György Keglevich

Beilstein J. Org. Chem. 2023, 19, 89–90, doi:10.3762/bjoc.19.8

• -tris(chlorophenyl)-1,2-diphosphacyclopentadienides upon reaction with polyphosphides. These ligands were converted to the corresponding ferrocene complexes. This synthesis was elaborated by Zagidullin and his team. The two remaining articles also indicate the importance of the P-heterocyclic discipline

Comparison of crystal structure and DFT calculations of triferrocenyl trithiophosphite’s conformance

• Ruslan P. Shekurov,
• Mikhail N. Khrizanforov,
• Ilya A. Bezkishko,
• Tatiana P. Gerasimova,
• Almaz A. Zagidullin,
• Daut R. Islamov and
• Vasili A. Miluykov

Beilstein J. Org. Chem. 2022, 18, 1499–1504, doi:10.3762/bjoc.18.157

• ensembles from ferrocene-containing ligands and metal ions or clusters. This makes it possible to realize an almost infinite number of multiferrocene compounds and to select leading compounds for the successful creation of molecular electronic devices. It should be noted that with the exception of tertiary

• phosphines, a relatively small number of trivalent phosphorus derivatives has been used to construct multiferrocene compounds. The use of ferrocene derivatives containing a phosphorus–sulfur bond is a promising direction, since coordination with a metal atom can occur both at the phosphorus and sulfur atoms

• ferrocene moieties. It should be noted that the first oxidation potential is almost identical to free ferrocene [6]. Herein we report the crystal structure of triferrocenyl trithiophosphite. For triferrocenyl trithiophosphite a trans-gauche-gauche configuration with torsion angles of −34°, −40°, and 173

Microelectrode arrays, electrosynthesis, and the optimization of signaling on an inert, stable surface

• Kendra Drayton-White,
• Siyue Liu,
• Yu-Chia Chang,
• Sakashi Uppal and
• Kevin D. Moeller

Beilstein J. Org. Chem. 2022, 18, 1488–1498, doi:10.3762/bjoc.18.156

• details) containing ferrocene carboxylic acid as a redox mediator. Initially, the array was placed in a solution containing the smallest concentration of Gαi1 and then a current measured for the mediator at the electrodes in the array. The solution was then removed, replaced with a mediator/buffer

Naphthalimide-phenothiazine dyads: effect of conformational flexibility and matching of the energy of the charge-transfer state and the localized triplet excited state on the thermally activated delayed fluorescence

• Kaiyue Ye,
• Liyuan Cao,
• Davita M. E. van Raamsdonk,
• Zhijia Wang,
• Jianzhang Zhao,
• Daniel Escudero and
• Denis Jacquemin

Beilstein J. Org. Chem. 2022, 18, 1435–1453, doi:10.3762/bjoc.18.149

• , a glassy carbon electrode as working electrode, and the Ag/AgNO3 (0.1 M in ACN) couple as the reference electrode. The ferrocenium/ferrocene (Fc+/Fc) redox couple was used as an internal reference. Spectroelectrochemistry was performed using a 0.1 cm path length quartz electrochemical cell equipped

• deaerated DCM; NI-PTZ-O in deaerated ACN. Ferrocene (Fc) was used as internal reference (set as 0 V in the cyclic voltammograms). 0.10 M Bu4NPF6 as supporting electrolyte. Scan rates: 100 mV/s, c = 1.0 × 10−3 M, 20 °C. Spectroelectrochemistry traces of the UV–vis absorption spectra for (a) NI-PTZ observed

Synthesis and electrochemical properties of 3,4,5-tris(chlorophenyl)-1,2-diphosphaferrocenes

• Almaz A. Zagidullin,
• Farida F. Akhmatkhanova,
• Mikhail N. Khrizanforov,
• Robert R. Fayzullin,
• Tatiana P. Gerasimova,
• Ilya A. Bezkishko and
• Vasili A. Miluykov

Beilstein J. Org. Chem. 2022, 18, 1338–1345, doi:10.3762/bjoc.18.139

• classical ferrocene species. Various effective synthetic approaches were developed for 1-mono- [22][23][24], 1,2,3-tri- [25][26][27], 1,2,4-tri- [28][29][30], and pentaphosphaferrocenes [31][32][33], whereby the chemistry of these compounds is most investigated and well represented at present time. In

• Figure 5). During oxidation, there were no noticeable differences between 8b and 8c. The oxidation potentials of 8b and 8c were shifted to the positive region relative to pure ferrocene by 0.48–0.53 V. This, in turn, indicated that the chlorine atoms in the η5-P2C3R3 fragment did not significantly affect

Ferrocenoyl-adenines: substituent effects on regioselective acylation

• Mateja Toma,
• Gabrijel Zubčić,
• Jasmina Lapić,
• Senka Djaković,
• Davor Šakić and
• Valerije Vrček

Beilstein J. Org. Chem. 2022, 18, 1270–1277, doi:10.3762/bjoc.18.133

• /bjoc.18.133 Abstract A series of N6-substituted adenine–ferrocene conjugates was prepared and the reaction mechanism underlying the synthesis was explored. The SN2-like reaction between ferrocenoyl chloride and adenine anions is a regioselective process in which the product ratio (N7/N9-ferrocenoyl

• the acylation of purines from a regioselective to a regiospecific mode. Keywords: DFT; ferrocene; nucleophilicity; purine; steric effect; Introduction Nucleosides in which the sugar part is replaced with an organometallic moiety have attracted remarkable interest [1][2][3]. One important class are

• ferrocene–nucleobase conjugates [4], which are known to exhibit anticancer [5][6][7], antibacterial [8][9][10], or antitrypanosomal activity [11], but also may serve as electrochemical biosensors [12][13], self-assembled molecular materials [14][15], decorations of carbon tubes and nanomaterials [16][17

Synthesis, optical and electrochemical properties of (D–π)₂-type and (D–π)₂Ph-type fluorescent dyes

• Kosuke Takemura,
• Kazuki Ohira,
• Taiki Higashino,
• Keiichi Imato and
• Yousuke Ooyama

Beilstein J. Org. Chem. 2022, 18, 1047–1054, doi:10.3762/bjoc.18.106

• were internally referenced to ferrocene/ferrocenium (Fc/Fc+). The electrochemical data are summarized in Table 3. The cyclic voltammograms of the two dyes show a reversible oxidation wave with the anodic peak potential (Epaox) at 0.32 V for OTK-2 and 0.40 V for OTT-2 (Figure 2), while any obvious

Introducing a new 7-ring fused diindenone-dithieno[3,2-b:2',3'-d]thiophene unit as a promising component for organic semiconductor materials

• Valentin H. K. Fell,
• Joseph Cameron,
• Alexander L. Kanibolotsky,
• Eman J. Hussien and
• Peter J. Skabara

Beilstein J. Org. Chem. 2022, 18, 944–955, doi:10.3762/bjoc.18.94

• Equation 3) [65][66]: In which Eox is the half-wave potential of the first oxidation signal, and Ered is the half-wave potential of the first reduction signal. Ferrocene was used as the internal standard and its HOMO was taken to be −4.8 eV [67]. With these values, the frontier orbital energy levels of EtH

Palladium-catalyzed solid-state borylation of aryl halides using mechanochemistry

• Koji Kubota,
• Emiru Baba,
• Tamae Seo,
• Tatsuo Ishiyama and
• Hajime Ito

Beilstein J. Org. Chem. 2022, 18, 855–862, doi:10.3762/bjoc.18.86

• ). When the reaction was stopped after 5 min, only a 26% yield of 3a was obtained (Table 1, entry 2). The use of 1,1'-bis(diphenylphosphino)ferrocene (dppf), which is the optimal ligand under the original conditions for the solution-based protocol [8], provided only trace amounts of 3a (1%, Table 1, entry

Copper-catalyzed monoselective C–H amination of ferrocenes with alkylamines

• Zhen-Sheng Jia,
• Qiang Yue,
• Ya Li,
• Xue-Tao Xu,
• Kun Zhang and
• Bing-Feng Shi

Beilstein J. Org. Chem. 2021, 17, 2488–2495, doi:10.3762/bjoc.17.165

• , including bioactive molecules, were successfully installed to the ortho-position of ferrocene amides with high efficiency under mild conditions. A range of functionalized ferrocenes were compatible to give the aminated products in moderate to good yields. The gram-scale reaction was smoothly conducted and

• the directing group could be removed easily under basic conditions. Keywords: amination; C–H activation; copper; ferrocene; mono-selectivity; Introduction Ferrocene-based compounds have broad applications from asymmetric catalysis to medicinal discovery [1][2][3][4][5][6][7][8]. Therefore, the

• ][10][11][12]. However, the above protocols generally proceeded under harsh conditions that led to poor functional group tolerance and generated stoichiometric amounts of waste. Thus far, the transition-metal-catalyzed C–H functionalization strategy has innovated the way to producing ferrocene

Synthesis and investigation on optical and electrochemical properties of 2,4-diaryl-9-chloro-5,6,7,8-tetrahydroacridines

• Najeh Tka,
• Mohamed Adnene Hadj Ayed,
• Mourad Ben Braiek,
• Mahjoub Jabli and
• Peter Langer

Beilstein J. Org. Chem. 2021, 17, 2450–2461, doi:10.3762/bjoc.17.162

• reference electrode was calibrated using the ferrocene/ferrocenium (Fc/Fc+) redox system [67], the HOMO and LUMO energies were calculated by using the following equations: Here, VFOC is the potential value of Fc/Fc+ under the same experimental conditions (0.52 V) and 4.8 eV is the HOMO energy value of Fc

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

[2 + 1] Cycloaddition reactions of fullerene C₆₀ based on diazo compounds

• Yuliya N. Biglova

Beilstein J. Org. Chem. 2021, 17, 630–670, doi:10.3762/bjoc.17.55

• unusual ferrocene-containing block 202 was synthesized (Scheme 37) [158]. 1-(3-(Benzoyl)propyl)-1-phenyl[6,6]methanofullerene (203) was obtained by 1,3-dipolar cycloaddition of a tosylhydrazone derivative (obtained from 1,3-dibenzoylpropane) to C60 (Scheme 38) [159]. 2-Benzoylpropionic acid was used as

All-carbon [3 + 2] cycloaddition in natural product synthesis

• Zhuo Wang and
• Junyang Liu

Beilstein J. Org. Chem. 2020, 16, 3015–3031, doi:10.3762/bjoc.16.251

• synthesis of longeracinphyllin A (10), which was reported by Li and co-workers in 2017, used a 1,1’-bis(diphenylphosphino)ferrocene-promoted [3 + 2] cycloaddition [44] of enedione 86 and allenoate 87 to give adduct 88 in 45% yield. This adduct 88 was treated with an excess of LiCH2PO(OMe)2 to afford β

• ) were reported by Li’s group [42] and Zhai’s group [43] independently in 2017 (Scheme 6B and Scheme 6C). In Li’s synthesis, the common intermediate dienone 86 was subjected to a 1,1’-bis(diphenylphosphino)ferrocene-promoted [3 + 2] cycloaddition [41] with allenyl ketone 91 to give adduct 92a in 52

Controlled decomposition of SF₆ by electrochemical reduction

• Sébastien Bouvet,
• Bruce Pégot,
• Stéphane Sengmany,
• Erwan Le Gall,
• Eric Léonel,
• Anne-Marie Goncalves and
• Emmanuel Magnier

Beilstein J. Org. Chem. 2020, 16, 2948–2953, doi:10.3762/bjoc.16.244

• . All potentials were measured against a pseudo silver reference electrode (SRE). The addition of ferrocene in the electrolyte gives access to an internal reference [33]. In order to improve the current detection level of SF6, platinum disk electrodes were used as working electrode (Pt

• temperature, under slight argon stream, v = 20 mV/s. (b) Same conditions as for (a) after addition of SF6. (c) Same conditions than (a) after addition of ferrocene (10−3 M). Variation of the current reduction (i2) of SF6 onto Pt macroelectrode (Ø = 0.76 mm) at −2.3 V vs Fc+/Fc in acetonitrile freshly

Ultrasound-assisted Strecker synthesis of novel 2-(hetero)aryl-2-(arylamino)acetonitrile derivatives

• Emese Gal,
• Luiza Gaina,
• Hermina Petkes,
• Alexandra Pop,
• Castelia Cristea,
• Gabriel Barta,
• Dan Cristian Vodnar and
• Luminiţa Silaghi-Dumitrescu

Beilstein J. Org. Chem. 2020, 16, 2929–2936, doi:10.3762/bjoc.16.242

• Abstract This work describes an efficient, simple, and ecofriendly sonochemical procedure for the preparation of new α-(arylamino)acetonitrile derivatives C-substituted with phenothiazine or ferrocene units. The synthetic protocol is based on the Strecker reaction of a (hetero)aryl aldimine substrate with

• that the C-(hetero)aryl-α-(arylamino)acetonitrile derivatives can be considered genotoxically safe and possibly antimutagenic. Keywords: Ames test; α-aminoacetonitriles; ferrocene; phenothiazine; SEM; single crystal XRD; sonochemistry; Introduction Sonochemistry can be considered as a major

• ferrocene unit displays a remarkably reversible one-electron oxidation behavior offering interesting fields of applications for its derivatives as redox mediators in sensor applications [10]. Medicinal applications of ferrocene derivatives grafted on different pharmacophoric units greatly benefit from the

Synthesis and characterization of S,N-heterotetracenes

• Astrid Vogt,
• Florian Henne,
• Christoph Wetzel,
• Elena Mena-Osteritz and
• Peter Bäuerle

Beilstein J. Org. Chem. 2020, 16, 2636–2644, doi:10.3762/bjoc.16.214

• planar and conformationally restricted systems [48]. In order to get information about the redox properties and energetics of the frontier orbitals, the S,N-heteroacenes were studied by cyclic voltammetry and all potentials were referenced against the ferrocene/ferricenium couple (Table 1). In the series

Thermodynamic and electrochemical study of tailor-made crown ethers for redox-switchable (pseudo)rotaxanes

• Henrik Hupatz,
• Marius Gaedke,
• Hendrik V. Schröder,
• Julia Beerhues,
• Arto Valkonen,
• Fabian Klautzsch,
• Sebastian Müller,
• Felix Witte,
• Kari Rissanen,
• Biprajit Sarkar and
• Christoph A. Schalley

Beilstein J. Org. Chem. 2020, 16, 2576–2588, doi:10.3762/bjoc.16.209

• ferrocene [14][17]. Yet, switchable crown ethers are also widely applied as cation sensors, where the sensor activity can be controlled by external stimuli, e.g., light, the redox potential or chemical reagents [14][17]. Redox-switchable crown ethers have been shown to sense cations by the generation of an

Synthetic approaches to bowl-shaped π-conjugated sumanene and its congeners

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 2212–2259, doi:10.3762/bjoc.16.186

• by virtue of ROM–RCM which on subsequent DDQ oxidation followed by HWE reaction provided the desired compound 108 (Scheme 26). In a really brilliant manner, Kasprzak and Sakurai in 2019 have created a sumanene–ferrocene dual system for selective recognition of cesium cations by means of site

• ferrocene–sumanene conjugates by employing reductive amination reaction for the formation of compounds 110 and 116. Whereas compounds 111, 113, and 117 were prepared by means of condensation reaction as depicted in Scheme 27. On the other hand, Lentz’s group has reported the synthesis of sumanenylferrocene

• 118 as well as 1,1’-disumanenylferrocene 119 through Pd-catalyzed Negishi coupling of iodosumanene (79) with ferrocenylzinc chloride and 1,1’-bis(chlorozincio)ferrocene (Scheme 28) [9]. These synthesized molecules were confirmed utilizing spectroscopic techniques as well as by virtue of X-ray

Models of necessity

• Timothy Clark and
• Martin G. Hicks

Beilstein J. Org. Chem. 2020, 16, 1649–1661, doi:10.3762/bjoc.16.137

• chemist who uses predominantly the Lewis bonding picture or an inorganic chemist rooted in the VSEPR model switch quite happily to qualitative molecular-orbital arguments to explain electrocyclic reactions or the structure of ferrocene, even in teaching. In contrast, cheminformatics will need to adopt a

Five-component, one-pot synthesis of an electroactive rotaxane comprising a bisferrocene macrocycle

• Natalie Lagesse,
• Luca Pisciottani,
• Maxime Douarre,
• Pascale Godard,
• Brice Kauffmann,
• Vicente Martí-Centelles and
• Nathan D. McClenaghan

Beilstein J. Org. Chem. 2020, 16, 1564–1571, doi:10.3762/bjoc.16.128

• of Bordeaux, Pessac, France 10.3762/bjoc.16.128 Abstract The templated clipping of a ferrocene-grafted isophthalic acid derivative to encircle a hydrogen-bonding axle through the reaction with 1,4-bis(aminomethyl)benzene is described. The constituent electroactive macrocycle of the resultant [2

• crystal X-ray structure of a doubly ferrocene-decorated [2]rotaxane are further reported. Keywords: ferrocene; macrocycle; rotaxane; single crystal X-ray structure; template; Introduction The development of interlocked molecules with tailored properties allowed the preparation of molecular machines able

• ][10][11][12][13][14]. In this context, we report the synthesis of a rotaxane, where a “clipping” reaction generates a tetraamide macrocycle with two peripheral ferrocene moieties on a preformed thread (Figure 1b). The resulting versatile and easily accessible electroactive macrocycle is anticipated to

Ferrocenyl-substituted tetrahydrothiophenes via formal [3 + 2]-cycloaddition reactions of ferrocenyl thioketones with donor–acceptor cyclopropanes

• Grzegorz Mlostoń,
• Mateusz Kowalczyk,
• André U. Augustin,
• Peter G. Jones and
• Daniel B. Werz

Beilstein J. Org. Chem. 2020, 16, 1288–1295, doi:10.3762/bjoc.16.109

• used with no special precautions. In general, ferrocene has been considered as an ‘exceptional compound’ [16][17] and in our hands ferrocenyl-functionalized sulfur heterocycles, e.g., thiiranes and 1,3-dithiolanes, have found applications for the synthesis of compounds relevant for medicinal [18] and

• sides of the ring plane. The described reactions supplement the recently reported synthetic applications of alkyl/ferrocenyl thioketones as attractive substrates for the synthesis of chiral ferrocene derivatives [22] and ferrocenyl-substituted platinathiiranes [23]. It should be also emphasized that the