Enduracididine, a rare amino acid component of peptide antibiotics: Natural products and synthesis

• Darcy J. Atkinson,
• Briar J. Naysmith,
• Daniel P. Furkert and
• Margaret A. Brimble

Beilstein J. Org. Chem. 2016, 12, 2325–2342, doi:10.3762/bjoc.12.226

• et al. [47]. These syntheses substituted the enduracididine residue for the more readily available L-arginine. The total synthesis of the full teixobactin structure was completed in 2016 by Payne et al. [72] using Fmoc solid-phase peptide synthesis (SPPS). The key to the synthesis was access to the

• synthetic routes to enduracididine. However, current syntheses are cumbersome and inefficient. A robust and scalable synthetic route to an orthogonally protected enduracididine derivative suitable for solid phase peptide synthesis would greatly facilitate antibiotic drug development focused on a teixobactin

Studies on the synthesis of peptides containing dehydrovaline and dehydroisoleucine based on copper-mediated enamide formation

• Franziska Gille and
• Andreas Kirschning

Beilstein J. Org. Chem. 2016, 12, 564–570, doi:10.3762/bjoc.12.55

• , they can also be regarded as enamines. Due to the lack of reactivity of the amino group as well as the carboxylate, dehydroamino acids have hardly employed as building blocks in peptide synthesis. Therefore, the olefinic double bond is commonly introduced after the peptide backbone is assembled and

Amino-functionalized (meth)acryl polymers by use of a solvent-polarity sensitive protecting group (Br-t-BOC)

• Helmut Ritter,
• Monir Tabatabai and
• Markus Herrmann

Beilstein J. Org. Chem. 2016, 12, 245–252, doi:10.3762/bjoc.12.26

• . Carpino [8][9][10] and a first practical application in peptide synthesis [11] this protecting group was quasi forgotten. In the present work we report new Br-t-Boc-protected (meth)acrylic monomers and their polymerization through free radical polymerization. The kinetics of Br-t-BOC solvolysis of the

Assembly of synthetic Aβ miniamyloids on polyol templates

• Sebastian Nils Fischer and
• Armin Geyer

Beilstein J. Org. Chem. 2015, 11, 2646–2653, doi:10.3762/bjoc.11.284

• , Aβ peptide pentapeptide boronic acids 1 and 2 were synthesized by solid-phase peptide synthesis and studied in esterification experiments with polyhydroxylated templates. The bis-hydroxylated dipeptide Hot=Tap serves as a template of adjustable degree of oligomerization which spontaneously forms

• obtained by routine solid-phase peptide synthesis on chloro-(2'-chloro)trityl polystyrene (CTC resin) and coupling of the unprotected boronic acid as the final building block. The C-terminal boronic acids need careful exclusion of water because of the reversible linkage to the resin, while no special

Synthesis and evaluation of the biostability and cell compatibility of novel conjugates of nucleobase, peptidic epitope, and saccharide

• Dan Yuan,
• Xuewen Du,
• Junfeng Shi,
• Ning Zhou,
• Abdulgader Ahmed Baoum,
• Khalid Omar Al Footy,
• Khadija Omar Badahdah and
• Bing Xu

Beilstein J. Org. Chem. 2015, 11, 1352–1359, doi:10.3762/bjoc.11.145

• .11.145 Abstract This article reports the synthesis of a new class of conjugates containing a nucleobase, a peptidic epitope, and a saccharide and the evalution of their gelation, biostability, and cell compatibility. We demonstrate a facile synthetic process, based on solid-phase peptide synthesis of

• designed the nucleopeptides 5 and 6. In addition, we substituted thymine with adenine to generate nucleopeptides 7 and 8 that contain adenine, the nucleobase is complementary of thymine. Synthesis The NA conjugates 5–8 were obtained according to a facile method of solid-phase peptide synthesis (SPPS) [17

• solid-phase peptide synthesis and liquid-phase synthesis). i) Fmoc-Val-OH, DIPEA; ii) 20% piperidine; iii) Fmoc-Pro-OH, HBTU, DIPEA; iv) Fmoc-Thr(t-Bu)-OH, HBTU, DIPEA; v) thymine-1-acetic acid, HBTU, DIPEA; vi) TFE/DCM 2:8; vii) D-glucosamine hydrochloride, HBTU, DIPEA; viii) TFA/H2O 95:5

Synthesis of multivalent carbohydrate mimetics with aminopolyol end groups and their evaluation as L-selectin inhibitors

• Joana Salta,
• Jens Dernedde and
• Hans-Ulrich Reissig

Beilstein J. Org. Chem. 2015, 11, 638–646, doi:10.3762/bjoc.11.72

• selected HATU (1-[bis(dimethylamino)methylene]-1H-1,2,3-triazolo[4,5-b]pyridinium-3-oxide hexafluorophosphate), a coupling reagent frequently used in peptide synthesis [34]. We applied standard conditions for the preparation of one divalent and two trivalent amides (Scheme 4). To our pleasure divalent

Potential of acylated peptides to target the influenza A virus

• Daniel Lauster,
• Damian Pawolski,
• Julian Storm,
• Kai Ludwig,
• Rudolf Volkmer,
• Henry Memczak,
• Andreas Herrmann and
• Sumati Bhatia

Beilstein J. Org. Chem. 2015, 11, 589–595, doi:10.3762/bjoc.11.65

• . Results and Discussion Peptide synthesis and characterization Peptide synthesis was performed using a rink amide resin on an automatic synthesizer by the Fmoc/tert-butyl strategy [17][18]. The N-terminus of the N-terminal free resin bound peptide was acylated with stearic acid using O-(benzotriazol-1-yl

Chemoselective O-acylation of hydroxyamino acids and amino alcohols under acidic reaction conditions: History, scope and applications

• Tor E. Kristensen

Beilstein J. Org. Chem. 2015, 11, 446–468, doi:10.3762/bjoc.11.51

• Bretschneider and Biemann to the diacetylation of 3,4-dihydroxyphenylalanine (DOPA), opening up for their improved synthesis of poly-DOPA [15]. As part of their influential studies on carbodiimide coupling agents for peptide synthesis, Sheehan, Goodman and Hess reported, in 1956, a chemoselective O-acetylation

Come-back of phenanthridine and phenanthridinium derivatives in the 21st century

• Lidija-Marija Tumir,
• Marijana Radić Stojković and
• Ivo Piantanida

Beilstein J. Org. Chem. 2014, 10, 2930–2954, doi:10.3762/bjoc.10.312

• structural explanation of observed ICD recognition. Laborious synthetic procedures for the preparation of bis-phenanthridine–nucleobase conjugates initiated a novel, convergent and much more flexible approach relying on solid phase peptide synthesis described earlier (Figure 4). In such a manner prepared

Synthesis of nanodiamond derivatives carrying amino functions and quantification by a modified Kaiser test

• Gerald Jarre,
• Steffen Heyer,
• Elisabeth Memmel,
• Thomas Meinhardt and
• Anke Krueger

Beilstein J. Org. Chem. 2014, 10, 2729–2737, doi:10.3762/bjoc.10.288

• test on residual amino groups of amino acids in solid-phase supported peptide synthesis. A report on a quantitative variation of the Kaiser test was published by Sarin et al. [23]. As this assay is colorimetric, its execution is very convenient. One limitation of the method, though, is the restriction

Versatile synthesis of amino acid functionalized nucleosides via a domino carboxamidation reaction

• Vicky Gheerardijn,
• Jos Van den Begin and
• Annemieke Madder

Beilstein J. Org. Chem. 2014, 10, 2566–2572, doi:10.3762/bjoc.10.268

• functionalized amino acids onto nucleoside building blocks (Figure 1). Following the event of solid phase peptide synthesis, a large range of amino acids with different protection schemes and stereochemistry is currently commercially available. We here illustrate a methodology for direct incorporation of amino

Towards the sequence-specific multivalent molecular recognition of cyclodextrin oligomers

• Michael Kurlemann and
• Bart Jan Ravoo

Beilstein J. Org. Chem. 2014, 10, 2428–2440, doi:10.3762/bjoc.10.253

• Supporting Information File 1). The di- and trivalent guest strands 8–14 (Figure 1C, D) were synthesized by solid phase peptide synthesis using a standard Fmoc-protocol (Figure 3). Therefore the serine derivatives 15 and 16 (Figure 1E) and a water-soluble linker molecule were used. The purity of the guest

• ). Synthesis of the di- and trivalent CD sequences 1–7 (for detailed reaction conditions see Supporting Information File 1). Solid phase peptide synthesis of the di- and trivalent guest strands 8 – 14 (for detailed reaction conditions see Supporting Information File 1). 1H NMR spectra of 17 (B) and its

Synthesis of novel conjugates of a saccharide, amino acids, nucleobase and the evaluation of their cell compatibility

• Dan Yuan,
• Xuewen Du,
• Junfeng Shi,
• Ning Zhou,
• Abdulgader Ahmed Baoum and
• Bing Xu

Beilstein J. Org. Chem. 2014, 10, 2406–2413, doi:10.3762/bjoc.10.250

• synthesis of a novel type of conjugate of three fundamental biological build blocks (i.e., saccharide, amino acids, and nucleobase) and their cell compatibility. The facile synthesis starts with the synthesis of nucleobase and saccharide derivatives, then uses solid-phase peptide synthesis (SPPS) to build

• . Synthesis Schemes 1–4 show the syntheses of the SAN conjugates formed by the reaction of the amino acid segment with the nucleobase and the saccharide derivative. The key steps include N-alkylation, acetylation, solid-phase peptide synthesis (SPPS) and N-hydroxysuccinimide (NHS)/N,N-diisopropylcarbodiimide

• 12, 16, and 19. Solid-phase peptide synthesis of peptide segment Fmoc-naphthAla-Phe-Arg(pbf)-Gly-Asn(Ot-Bu)-OH (20). Synthesis of H-naphthAla-Phe-Arg(pbf)-Gly-Asn(Ot-Bu)-adenine (22). Synthesis of saccharide–amino acids–nucleobase conjugate 3. Supporting Information Supporting Information File 432

Synthesis and optical properties of pyrrolidinyl peptide nucleic acid carrying a clicked Nile red label

• Nattawut Yotapan,
• Chayan Charoenpakdee,
• Pawinee Wathanathavorn,
• Boonsong Ditmangklo,
• Hans-Achim Wagenknecht and
• Tirayut Vilaivan

Beilstein J. Org. Chem. 2014, 10, 2166–2174, doi:10.3762/bjoc.10.224

• groove (complementary duplexes) or the hydrophobic pocket formed by the looped-out base (bulged duplexes) rather than intercalating into the base stacks. Experimental General remarks All chemicals were obtained from standard suppliers and used as received. Anhydrous DMF for peptide synthesis was

Facile synthesis of 1-alkoxy-1H-benzo- and 7-azabenzotriazoles from peptide coupling agents, mechanistic studies, and synthetic applications

• Mahesh K. Lakshman,
• Manish K. Singh,
• Mukesh Kumar,
• Raghu Ram Chamala,
• Vijayender R. Yedulla,
• Domenick Wagner,
• Evan Leung,
• Lijia Yang,
• Asha Matin and
• Sadia Ahmad

Beilstein J. Org. Chem. 2014, 10, 1919–1932, doi:10.3762/bjoc.10.200

• Abstract (1H-Benzo[d][1,2,3]triazol-1-yloxy)tris(dimethylamino)phosphonium hexafluorophosphate (BOP), 1H-benzo[d][1,2,3]triazol-1-yl 4-methylbenzenesulfonate (Bt-OTs), and 3H-[1,2,3]triazolo[4,5-b]pyridine-3-yl 4-methylbenzenesulfonate (At-OTs) are classically utilized in peptide synthesis for amide-bond

Convergent synthetic methodology for the construction of self-adjuvanting lipopeptide vaccines using a novel carbohydrate scaffold

• Vincent Fagan,
• Istvan Toth and
• Pavla Simerska

Beilstein J. Org. Chem. 2014, 10, 1741–1748, doi:10.3762/bjoc.10.181

• previously reported carbohydrate-based vaccine constructs [11] were prepared by a divergent approach, where the carbohydrate core was coupled to the resin-bound LCP adjuvanting moiety, followed by stepwise synthesis of the B cell epitopes using solid-phase peptide synthesis (SPPS). Using this divergent

Orthogonal dual thiol–chloroacetyl and thiol–ene couplings for the sequential one-pot assembly of heteroglycoclusters

• Michele Fiore,
• Gour Chand Daskhan,
• Baptiste Thomas and
• Olivier Renaudet

Beilstein J. Org. Chem. 2014, 10, 1557–1563, doi:10.3762/bjoc.10.160

• 3000+ Bruker Daltonics in positive mode. General procedure for solid-phase peptide synthesis. Assembly of all protected peptides was carried out on a synthesizer (Syro II, Biotage) using the Fmoc/t-Bu strategy and the Fmoc-Gly-SasrinTM resin. Coupling reactions were performed using, relative to the

Design, automated synthesis and immunological evaluation of NOD2-ligand–antigen conjugates

• Marian M. J. H. P. Willems,
• Gijs G. Zom,
• Nico Meeuwenoord,
• Ferry A. Ossendorp,
• Herman S. Overkleeft,
• Gijsbert A. van der Marel,
• Jeroen D. C. Codée and
• Dmitri V. Filippov

Beilstein J. Org. Chem. 2014, 10, 1445–1453, doi:10.3762/bjoc.10.148

• . We here describe the assembly of MDP building blocks, suitable for automated solid phase peptide synthesis (SPPS), their use in the assembly of the four MDP-antigen conjugates 2–5 and the immunological evaluation of the constructs. Results and Discussion Synthesis of the conjugates The MDP-antigen

• conjugates 2–5 were prepared using an automated solid-phase peptide synthesis (SPPS) protocol. In all these syntheses commercially available Tentagel S RAM resin and amino acids were applied. The synthesis of the required MDP building blocks 10 and 16 is depicted in Scheme 1. The 3-azidopropanol spacer was

• % yield. With MurNAc building block 10 and 16 in hand, the solid-phase peptide synthesis of the MDP-antigen conjugates 2–5 was undertaken (Scheme 2). Commercially available Fmoc protected amino acids equipped with standard acid labile protective groups were used. The side chain of the C-terminal lysine of

Molecular recognition of surface-immobilized carbohydrates by a synthetic lectin

• Melanie Rauschenberg,
• Eva-Corrina Fritz,
• Christian Schulz,
• Tobias Kaufmann and
• Bart Jan Ravoo

Beilstein J. Org. Chem. 2014, 10, 1354–1364, doi:10.3762/bjoc.10.138

• lectins on the immobilized carbohydrates provides insight into the affinity and selectivity of lectin–carbohydrate interaction. Results and Discussion The synthetic lectin HisHis was prepared by air oxidation of the tripeptide Cys-Hys-Cys (synthesized by solid phase peptide synthesis) as described

Automated solid-phase peptide synthesis to obtain therapeutic peptides

• Veronika Mäde,
• Sylvia Els-Heindl and
• Annette G. Beck-Sickinger

Beilstein J. Org. Chem. 2014, 10, 1197–1212, doi:10.3762/bjoc.10.118

• their respective targets have led to tremendous progress for therapeutic applications in the last years. In order to increase the drugability of these frequently unstable and rapidly cleared molecules, chemical modifications are of great interest. Automated solid-phase peptide synthesis (SPPS) offers a

• : automated synthesis; automation; lipidation; PEGylation; peptide drugs; solid-phase peptide synthesis; therapeutic peptides; Introduction Peptides and proteins are involved in a large variety of biochemical processes and physiological functions. Peptides can consist of up to 50 amino acids and have

• intravenous) application, have prompted further research in this field [14]. Therefore, methods to prolong peptide stability are of great interest. Here, we highlight the importance of automated solid-phase peptide synthesis (SPPS) in the process of peptide modification. Principles of chemical synthesis of

Solid-phase-supported synthesis of morpholinoglycine oligonucleotide mimics

• Tatyana V. Abramova,
• Sergey S. Belov,
• Yulia V. Tarasenko and
• Vladimir N. Silnikov

Beilstein J. Org. Chem. 2014, 10, 1151–1158, doi:10.3762/bjoc.10.115

• efficient solid-phase-supported peptide synthesis (SPPS) of morpholinoglycine oligonucleotide (MorGly) mimics has been developed. The proposed strategy includes a novel specially designed labile linker group containing the oxalyl residue and the 2-aminomethylmorpholino nucleoside analogues as first subunits

• . Keywords: labile linker; morpholino oligomers; oligonucleotide mimics; solid-phase-supported peptide synthesis (SPPS); Introduction The phosphorodiamidate morpholino oligomers (PMO) and peptide conjugated PMO (PPMO) are currently promising candidates for antisense therapy of a number of infectious and

Amino acid motifs in natural products: synthesis of O-acylated derivatives of (2S,3S)-3-hydroxyleucine

• Oliver Ries,
• Martin Büschleb,
• Markus Granitzka,
• Dietmar Stalke and
• Christian Ducho

Beilstein J. Org. Chem. 2014, 10, 1135–1142, doi:10.3762/bjoc.10.113

• derivatization as well as for solid-phase peptide synthesis. With respect to according motifs occurring in natural products, we have converted these building blocks into 3-O-acylated structures. Utilizing an esterification and cross-metathesis protocol, (2S,3S)-3-hydroxyleucine derivatives were synthesized, thus

• -Fmoc-protected building blocks potentially suitable for solid-phase peptide synthesis (SPPS). It is well established that O-acylated β-hydroxy-α-amino acids can be used in Fmoc-strategy peptide syntheses without migration of the acyl unit [37][38][39]. Based on these findings, we have desired to

• -phase peptide synthesis (SPPS). Furthermore, we have employed such building blocks for the synthesis of protected analogues 15a,b of the tripeptide unit of naturally occurring muraymycin nucleoside antibiotics. We have also established unprecedented protocols for early- and late-stage derivatizations of

Molecular architecture with carbohydrate functionalized β-peptides adopting 3₁₄-helical conformation

• Nitin J. Pawar,
• Navdeep S. Sidhu,
• George M. Sheldrick,
• Dilip D. Dhavale and
• Ulf Diederichsen

Beilstein J. Org. Chem. 2014, 10, 948–955, doi:10.3762/bjoc.10.93

• for carbohydrate and peptide chemistry. Therefore, sugar units are introduced by side-chain ligation and labeling strategies on the peptide scaffold or were established by incorporation of sugar-β-amino acids by solid-phase peptide synthesis (SPPS) [36][37]. Sugar amino acid building blocks have

Advancements in the mechanistic understanding of the copper-catalyzed azide–alkyne cycloaddition

• Regina Berg and
• Bernd F. Straub

Beilstein J. Org. Chem. 2013, 9, 2715–2750, doi:10.3762/bjoc.9.308

• Boc groups. Meldal et al. reported this reaction in the context of solid-supported peptide synthesis and expressed their hope for the preparation of a library with triazole-containing peptides. The group of Sharpless, on the other hand, presented a copper-catalyzed azide–alkyne cycloaddition under

Synthesis of homo- and heteromultivalent carbohydrate-functionalized oligo(amidoamines) using novel glyco-building blocks

• Felix Wojcik,
• Sinaida Lel,
• Alexander G. O’Brien,
• Peter H. Seeberger and
• Laura Hartmann

Beilstein J. Org. Chem. 2013, 9, 2395–2403, doi:10.3762/bjoc.9.276

• three different glycooligomers 14–16 (Figure 3) to show the potential of the building block approach for the straightforward synthesis of a variety of differently glycosylated structures. The oligomer synthesis is based on standard peptide synthesis protocols and amide formation via activation of the