A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

• for the water removal instead employed either DMSO or ionic liquids as additives for the water removal. The same condensation (of 17 to 127) was also performed by Clark et al. using a silica-coated microreactor with an AP-T catalyst deposited on the reactor’s walls [160]. The solvent-free approach

N-tert-Butanesulfinyl imines in the asymmetric synthesis of nitrogen-containing heterocycles

• Joseane A. Mendes,
• Paulo R. R. Costa,
• Miguel Yus,
• Francisco Foubelo and
• Camilla D. Buarque

Beilstein J. Org. Chem. 2021, 17, 1096–1140, doi:10.3762/bjoc.17.86

• was the only effective reagent when performing the reaction at 60 °C in THF [16]. Ketimines were also synthesized with Ti(OEt)4, under microwave irradiation in a solvent-free system [20]. In hindered ketones, Ti(OiPr)4 or Ti(OEt)4 using vacuum or under a nitrogen flow were effective to tert

• under solvent-free conditions was carried out, using sodium carbonate as base promoter. The resulting dimethyl 2-(1-aminoalkyl)malonates 50 were obtained in moderate to good yields as single diastereoisomers in all cases except for aromatic aldimines. Compounds 50 could be easily transformed

Prins cyclization-mediated stereoselective synthesis of tetrahydropyrans and dihydropyrans: an inspection of twenty years

• Asha Budakoti,
• Pradip Kumar Mondal,
• Prachi Verma and
• Jagadish Khamrai

Beilstein J. Org. Chem. 2021, 17, 932–963, doi:10.3762/bjoc.17.77

• cyclization reaction of allyl bromide (228) with a carbonyl compound promoted by BBIMBr/SnBr2 complex under solvent-free conditions has been explored [97]. The mechanism of the reaction was shown to include a Barbier reaction of allyl bromide with an aldehyde in the presence of SnBr3 and a quaternary ammonium

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

• irradiation under solvent-free conditions. The library of compounds proved to be active as xanthine oxidase inhibitors with the most potent molecule showcasing IC50 = 4 μM (Scheme 21). 5 Pyrroles Pyrroles are five-membered heterocycles consisting of four carbon atoms and a nitrogen atom. The pyrrole ring is

• construction of dihydropyrimidinones 78 utilizing a three-component reaction of acyclic 1,3-diketones 54, urea/thiourea (77) and aldehyde 5 exploring La2O3 as catalyst under microwave irradiation under solvent-free conditions with good functional group tolerance and excellent yields (Scheme 28). The reaction

• first time reported a microwave-assisted four-component domino reaction involving acyclic 1,3-diketones 54, amines 32, diethyl malonate (126) and triethyl orthoformate (111) for the synthesis of substituted pyridone derivatives 127 at 120 °C under catalyst- and solvent-free conditions. The reaction

Synthesis of dibenzosuberenone-based novel polycyclic π-conjugated dihydropyridazines, pyridazines and pyrroles

• Ramazan Koçak and
• Arif Daştan

Beilstein J. Org. Chem. 2021, 17, 719–729, doi:10.3762/bjoc.17.61

• dibenzosuberenone (1) with tetrazines 2a–l. Inverse electron-demand Diels–Alder reactions between dibenzosuberenone 1 and tetrazines 2ka and 2lb. a5.55 mmol 1, 3.70 mmol 2k, 10 mL toluene, 120 ˚C, 48 h. b4.85 mmol 1, 0.98 mmol 2l, 100 ˚C, overnight (solvent free). Proposed reaction mechanism for the formation of

Valorisation of plastic waste via metal-catalysed depolymerisation

• Francesca Liguori,
• Carmen Moreno-Marrodán and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2021, 17, 589–621, doi:10.3762/bjoc.17.53

• in >97% yield into liquid hydrocarbon (alkane) products having a narrow distribution of the molecular weight (960–1130 g⋅mol−1) under 11.7 bar H2 at 300 °C and solvent-free conditions [146]. The pyrolysis oils produced may be used as lubricants, waxes or further processed into detergents and

A new and efficient methodology for olefin epoxidation catalyzed by supported cobalt nanoparticles

• Lucía Rossi-Fernández,
• Viviana Dorn and
• Gabriel Radivoy

Beilstein J. Org. Chem. 2021, 17, 519–526, doi:10.3762/bjoc.17.46

• solvent (DMF, MeCN, ethyl acetate, DMSO, solvent free) on the activity and selectivity of the nanocatalysts has been noted [27][41][42][43][44]. Furthermore, all the reported methodologies use either molecular oxygen together with an aldehyde as a co-reductant, or only a “green” peroxide (H2O2, TBHP) as

• . reported on a Co3O4/TiO2-catalyzed solvent-free version that allowed the use of molecular oxygen together with sub-stoichiometric amounts of TBHP as radical initiator at 80 °C, with conversions lower than 40% and ca. 20% selectivity in the epoxidation of 1-decene as the only substrate tested [42]. On the

Mesoionic tetrazolium-5-aminides: Synthesis, molecular and crystal structures, UV–vis spectra, and DFT calculations

• Vladislav A. Budevich,
• Sergei V. Voitekhovich,
• Alexander V. Zuraev,
• Vadim E. Matulis,
• Vitaly E. Matulis,
• Alexander S. Lyakhov,
• Ludmila S. Ivashkevich and
• Oleg A. Ivashkevich

Beilstein J. Org. Chem. 2021, 17, 385–395, doi:10.3762/bjoc.17.34

• , however, the residual electron density in the voids was difficult to model and therefore, the SQUEEZE routine in PLATON [45] was used to remove the contribution of the electron density in the solvent region from the intensity data and the solvent-free model was employed for the final refinement. The

An atom-economical addition of methyl azaarenes with aromatic aldehydes via benzylic C(sp³)–H bond functionalization under solvent- and catalyst-free conditions

• Divya Rohini Yennamaneni,
• Vasu Amrutham,
• Krishna Sai Gajula,
• Rammurthy Banothu,
• Murali Boosa and
• Narender Nama

Beilstein J. Org. Chem. 2020, 16, 3093–3103, doi:10.3762/bjoc.16.259

• 19, Kamala Nehru Nagar, Ghaziabad, UP-201002, India 10.3762/bjoc.16.259 Abstract A convenient practical approach for the synthesis of 2-(pyridin-2-yl)ethanols by direct benzylic addition of azaarenes and aldehydes under catalyst- and solvent-free conditions is reported. This reaction is metal-free

• azaarene derivatives under neat conditions through a highly atom-economical pathway. To evaluate the preparative potential of this process, gram-scale reactions were performed up to a 10 g scale. Keywords: aldehydes; azaarenes; benzylic addition; green chemistry; solvent-free conditions; Introduction

• , variations in the absorption, an inadequate penetrating ability of the radiation into the reaction medium, and further reflection of the microwaves. Nevertheless, the solvent was water, which required long extraction processes compared to solvent-free conditions. Castro and co-workers have also reported the

Deoxyfluorination of acyl fluorides to trifluoromethyl compounds by FLUOLEAD^®/Olah’s reagent under solvent-free conditions

• Yumeng Liang,
• Akihito Taya,
• Zhengyu Zhao,
• Norimichi Saito and
• Norio Shibata

Beilstein J. Org. Chem. 2020, 16, 3052–3058, doi:10.3762/bjoc.16.254

• the formation of trifluoromethyl compounds from acyl fluorides has been developed. The combination of FLUOLEAD® and Olah’s reagent in solvent-free conditions at 70 °C initiated the significant deoxyfluorination of the acyl fluorides and resulted in the corresponding trifluoromethyl products with high

• trifluoromethyl compounds under the same reaction conditions. A reaction mechanism is proposed. Keywords: acyl fluorides; deoxyfluorination; fluorine; solvent-free; trifluoromethyl group; Introduction Due to an impressively wide effect of fluorine on the biological activity, the insertion of fluorine atoms or

• herein report the efficient deoxyfluorination protocol of acyl fluorides to the trifluoromethyl compounds using FLUOLEAD® (Scheme 1e). The key to the successful transformation is the use of FLUOLEAD® combined with Olah’s reagent [36] in solvent-free conditions. A wide variety of acyl fluorides involving

Regioselective synthesis of heterocyclic N-sulfonyl amidines from heteroaromatic thioamides and sulfonyl azides

• Vladimir Ilkin,
• Vera Berseneva,
• Tetyana Beryozkina,
• Tatiana Glukhareva,
• Lidia Dianova,
• Wim Dehaen,
• Eugenia Seliverstova and
• Vasiliy Bakulev

Beilstein J. Org. Chem. 2020, 16, 2937–2947, doi:10.3762/bjoc.16.243

• have found that 1-butyl-1,2,3-triazole-4-carbothioamide (1c) reacts well with benzenesulfonyl azide (2c) in various solvents to form the desired 1-butyl-1,2,3-N-sulfonyl amidine 3n in diverse solvents such as n-butanol, n-propanol, toluene, ethanol, water and even under solvent-free conditions (see

• Table 1 for the yields and other circumstances). From these data we can conclude that the yield of the final product is optimal for the reaction under solvent-free conditions. 1-Butyl-1,2,3-triazole 1с reacts faster than 1,2,3-triazole-4-carbothioamide 1f while using a lower amount of a sulfonyl azide

• (Table 1, entry 11 and Table 2, entry 14). Thus solvent-free conditions, a temperature of 88 °C and a thioamide/azide ratio of 1:2.5 are optimal to prepare N-sulfonyl amidine 1c (entry 11, Table 1). Next, these optimized conditions were used for the synthesis of a small library of 1-alkyl-1,2,3-triazoles

Ultrasound-assisted Strecker synthesis of novel 2-(hetero)aryl-2-(arylamino)acetonitrile derivatives

• Emese Gal,
• Luiza Gaina,
• Hermina Petkes,
• Alexandra Pop,
• Castelia Cristea,
• Gabriel Barta,
• Dan Cristian Vodnar and
• Luminiţa Silaghi-Dumitrescu

Beilstein J. Org. Chem. 2020, 16, 2929–2936, doi:10.3762/bjoc.16.242

• using “green” solvents, for example, low vapor pressure solvents such as ionic liquids [3], low volatile solvents such as glycerol, ethylene glycol and its oligomers, or nontoxic water solvent, as well as in heterogeneous media under solvent-free conditions [4]. Other advantages induced by sonication

One-pot multicomponent green Hantzsch synthesis of 1,2-dihydropyridine derivatives with antiproliferative activity

• Giovanna Bosica,
• Kaylie Demanuele,
• José M. Padrón and
• Adrián Puerta

Beilstein J. Org. Chem. 2020, 16, 2862–2869, doi:10.3762/bjoc.16.235

• , and the mechanism depends much on the identity of the substrates and the reaction conditions used [18]. Cao and collaborators have managed to synthesize the 1,2-dihydropyridine (1,2-DHP) regioisomer as the main product through the Hantzsch synthesis at room temperature and solvent-free conditions

• used since it offers a greener alternative to homogeneous catalysis and ideally a solvent-free design to reduce the amount of solvent waste [21][22]. These two factors will reduce the amount of hazardous chemicals by reducing the amount of solvent in the reactor and during the workup of the product. A

• included room temperature, a stoichiometric molar ratio of the reactants, using 40 wt % PW loaded on alumina under solvent-free conditions. These conditions satisfied the green protocol we were aiming for. Therefore, from this stage we moved onto the next one by changing the substrates to explore the

The B & B approach: Ball-milling conjugation of dextran with phenylboronic acid (PBA)-functionalized BODIPY

• Patrizia Andreozzi,
• Lorenza Tamberi,
• Elisamaria Tasca,
• Gina Elena Giacomazzo,
• Marta Martinez,
• Mirko Severi,
• Marco Marradi,
• Stefano Cicchi,
• Sergio Moya,
• Giacomo Biagiotti and
• Barbara Richichi

Beilstein J. Org. Chem. 2020, 16, 2272–2281, doi:10.3762/bjoc.16.188

• , Poland 10.3762/bjoc.16.188 Abstract Mechanochemistry is an emerging and reliable alternative to conventional solution (batch) synthesis of complex molecules under green and solvent-free conditions. In this regard, we report here on the conjugation of a dextran polysaccharide with a fluorescent probe, a

• reactions, and even in nanomaterials preparation [1][2][3][4][5]. Indeed, solid-state mechanochemical methodologies are a viable alternative to traditional syntheses in solution [4] for the preparation of complex molecules, either under solvent-free conditions, named ‘neat grinding’, or in nearly solvent

• short reaction time, reactant economy, higher degree of functionalization, and solvent-free conditions, compared to solution-based routes are discussed. The dextran mechanochemically conjugated to PBA-BODIPY (Dex-1b, Figure 1) formed nanoparticles through self-assembly retaining the fluorescent

Synthetic approaches to bowl-shaped π-conjugated sumanene and its congeners

• Shakeel Alvi and
• Rashid Ali

Beilstein J. Org. Chem. 2020, 16, 2212–2259, doi:10.3762/bjoc.16.186

• ) complex 123 as an endo-coordinated complex at the concave side. The complex 123a was prepared through the metalation of sumanene involving ligand exchange with a cyclopentadienyl (Cp) group of ferrocene by heating in the presence of Al powder and AlCl3 under solvent-free conditions followed by a counter

Mechanochemical green synthesis of hyper-crosslinked cyclodextrin polymers

• Alberto Rubin Pedrazzo,
• Fabrizio Caldera,
• Marco Zanetti,
• Silvia Lucia Appleton,
• Nilesh Kumar Dhakar and
• Francesco Trotta

Beilstein J. Org. Chem. 2020, 16, 1554–1563, doi:10.3762/bjoc.16.127

• present a new green synthesis of biodegradable polymers through a solvent-free procedure, displaying high potential of applications in various fields. After the synthesis, a significant amount of still reactive imidazoyl carbonyl groups within the NS structure were detected. These could be easily removed

Oxime radicals: generation, properties and application in organic synthesis

• Igor B. Krylov,
• Stanislav A. Paveliev,
• Alexander S. Budnikov and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2020, 16, 1234–1276, doi:10.3762/bjoc.16.107

• formed after hydrogen atom abstraction from the allyl or benzyl position couple with the di-tert-butyliminoxyl radical forming the oxime ethers 21 and 22. 1,4-Cyclohexadiene is dehydrogenated to benzene instantly and exothermally at room temperature [45]. The solvent-free reaction of oxime radical 8 and

Suzuki–Miyaura cross coupling is not an informative reaction to demonstrate the performance of new solvents

• James Sherwood

Beilstein J. Org. Chem. 2020, 16, 1001–1005, doi:10.3762/bjoc.16.89

• from a green chemistry perspective if the water can be reused. To this end, micellar chemistry is appropriate for cross couplings [19]. Residual water also assists ‘solvent-free’ methods [20]. In summary, the Suzuki–Miyaura reaction is a fantastically versatile and industrially important reaction [21

Preparation of 2-phospholene oxides by the isomerization of 3-phospholene oxides

• Péter Bagi,
• Réka Herbay,
• Nikolett Péczka,
• Zoltán Mucsi,
• István Timári and
• György Keglevich

Beilstein J. Org. Chem. 2020, 16, 818–832, doi:10.3762/bjoc.16.75

• -membered ring. As the thermal rearrangement was only feasible under solvent-free conditions, one may assume mechanism B, which involves the formation of phospholene oxide 1 dimers, and the second molecule only assists the rearrangement similarly to mechanism A. However, according to computations, in this

Reaction of indoles with aromatic fluoromethyl ketones: an efficient synthesis of trifluoromethyl(indolyl)phenylmethanols using K₂CO₃/n-Bu₄PBr in water

• Thanigaimalai Pillaiyar,
• Masoud Sedaghati and
• Gregor Schnakenburg

Beilstein J. Org. Chem. 2020, 16, 778–790, doi:10.3762/bjoc.16.71

• (TMG), also known as Barton's base, in excellent yields (Figure 2A) [24]. Recently, Liu and co-workers reported this reaction in the presence of cesium carbonate in acetonitrile (Figure 2B) [25]. Dinuclear zinc [26], cinchonidine catalysts, and solvent-free conditions [27] have been also utilized for

Aerobic synthesis of N-sulfonylamidines mediated by N-heterocyclic carbene copper(I) catalysts

• Faïma Lazreg,
• Marie Vasseur,
• Alexandra M. Z. Slawin and
• Catherine S. J. Cazin

Beilstein J. Org. Chem. 2020, 16, 482–491, doi:10.3762/bjoc.16.43

• : catalysis; copper; copper catalysis; N-heterocyclic carbene; solvent-free; sulfonylamidines; Introduction Amide derivatives represent a ubiquitous molecular construct in chemistry [1][2][3]. This structural motif favours rearrangements that lead to high reactivity and associated bioactivity [4][5]. Indeed

• reaction performed in air, using solvent-free conditions and in the absence of any additive. Results and Discussion [Cu(ICy)2]BF4 (1), [Cu(IPr)(ICy)]BF4 (2) and [Cu(IPr)(Pt-Bu3)]BF4 (3) were initially selected as optimum candidates [22]. This class of catalysts was expanded through the synthesis of the

• % conversion to the desired product was observed using the homoleptic cationic MIC (mesoionic carbene) complex 6 (Table 1, entry 6). For complexes 1–5, the conversion proved modest and ranged between 42 and 49% (Table 1, entries 1–5). Subsequently, solvent-free conditions were investigated (Table 1, entries 7

Oligomeric ricinoleic acid preparation promoted by an efficient and recoverable Brønsted acidic ionic liquid

• Fei You,
• Xing He,
• Song Gao,
• Hong-Ru Li and
• Liang-Nian He

Beilstein J. Org. Chem. 2020, 16, 351–361, doi:10.3762/bjoc.16.34

• oligomeric ricinoleic acid from ricinoleic acid under solvent-free conditions. The reaction parameters containing reaction temperature, vacuum degree, amount of catalyst and reaction time were optimized and it was found that the reaction under the conditions of 190 °C and 50 kPa with 15 wt % of the [HSO3

• undergo esterification, providing the oligomeric ricinoleic acid with different oligomerization degree. Conclusion To conclude, a highly efficient Brønsted acidic IL catalyst [HSO3-BDBU]H2PO4 was developed for the esterification of ricinoleic acid. The reaction performed well under solvent-free conditions

Efficient method for propargylation of aldehydes promoted by allenylboron compounds under microwave irradiation

• Jucleiton J. R. Freitas,
• Queila P. S. B. Freitas,
• Silvia R. C. P. Andrade,
• Juliano C. R. Freitas,
• Roberta A. Oliveira and
• Paulo H. Menezes

Beilstein J. Org. Chem. 2020, 16, 168–174, doi:10.3762/bjoc.16.19

• time and the possibility to perform solvent-free reactions [30]. However, the relative “greenness” of microwave-assisted reactions is still a point of discussion. For example, the question about the energy efficiency of microwave vs conventionally heated reactions must, in general, be evaluated with

• great care on a case-by-case basis. Even so, the search for safer alternatives to current synthetic methodologies avoiding the use of moisture/air-sensitive organometallics and, more important, the development of solvent-free protocols are in accordance with the concept of environmental impact factor (E

• factor) [31]. Within this context, the development of solvent-free methods is highly desirable since the difficult for solvent recycling in academic laboratories and chemical manufacturing plants is universal. In addition, a reliable method for the propargylation reaction which could involve the use of

Microwave-assisted synthesis of 2-substituted 4,5,6,7-tetrahydro-1,3-thiazepines from 4-aminobutanol

• María C. Mollo,
• Natalia B. Kilimciler,
• Juan A. Bisceglia and
• Liliana R. Orelli

Beilstein J. Org. Chem. 2020, 16, 32–38, doi:10.3762/bjoc.16.5

• alcohols promoted by trimethylsilyl polyphosphate (PPSE) in solvent-free conditions allowed for the synthesis of several hitherto unreported seven-membered iminothioethers bearing 2-aryl, alkenyl, aralkyl and alkyl substituents. The cyclodehydration reaction is likely to involve an SN2-type displacement

• % yield). Based on our previous experience on related heterocycles, the cyclization was performed with PPSE under solvent-free conditions (8 min, 90 °C), delivering 73% of compound 4a as the only product. As already mentioned, Wipf et al. had previously reported that cyclization of N

SnCl₄-catalyzed solvent-free acetolysis of 2,7-anhydrosialic acid derivatives

• Kesatebrhan Haile Asressu and
• Cheng-Chung Wang

Beilstein J. Org. Chem. 2019, 15, 2990–2999, doi:10.3762/bjoc.15.295

• order to access glycans in a pure form. In line with this, various C-5-substituted 2,7-anhydrosialic acid derivatives bearing both electron-donating and -withdrawing protecting groups were synthesized and subjected to different Lewis acid-catalyzed solvent-free ring-opening reactions at room temperature