Mechanochemical solid state synthesis of copper(I)/NHC complexes with K₃PO₄

• Ina Remy-Speckmann,
• Birte M. Zimmermann,
• Mahadeb Gorai,
• Martin Lerch and
• Johannes F. Teichert

Beilstein J. Org. Chem. 2023, 19, 440–447, doi:10.3762/bjoc.19.34

• ball mill synthesized bifunctional catalyst 5bm, again with slightly diminished yields and conversions. Application of the ball mill-synthesized complex 5bm in the alkyne semihydrogenation of tolane (12) gave (Z)-stilbene (13) with full stereoselectivity in good yield (86%, Scheme 3b). Noteworthy, the

Combretastatins D series and analogues: from isolation, synthetic challenges and biological activities

• Jorge de Lima Neto and
• Paulo Henrique Menezes

Beilstein J. Org. Chem. 2023, 19, 399–427, doi:10.3762/bjoc.19.31

• Wittig reaction led to the α,β-unsaturated ester 87, which was subjected to a hydrogenation reaction in the presence of metallic magnesium, leading to the formation of alkyne 88. The cis-alkene was selectively obtained using the Lindlar catalyst. Finally, hydrolysis of the ester led to the formation of

CuAAC-inspired synthesis of 1,2,3-triazole-bridged porphyrin conjugates: an overview

• Dileep Kumar Singh

Beilstein J. Org. Chem. 2023, 19, 349–379, doi:10.3762/bjoc.19.29

• -dipolar cycloaddition reaction between an azide and a terminal alkyne, also popular as "click reaction" or CuAAC reaction. Moreover, the 1,2,3-triazole ring also serves as a spacer and an electron transfer bridge between the porphyrin and the attached chromophores. In order to provide a critical overview

• of the synthesis and properties of various porphyrin-triazole hybrids, this review will discuss some of the key reactions involved in the preparation of triazole-linked porphyrin conjugates. Keywords: azide–alkyne; click chemistry; CuAAC; 1,3-dipolar cycloaddition; porphyrin; 1,2,3-triazole

• ], nanoscience [12], and materials research [13][14]. Moreover, this review describes the use of the click methodology for the construction of various β- and meso-substituted 1,2,3-triazoloporphyrins by using azide or alkyne-substituted porphyrin as substrate (Figure 2). Every example mentioned in this review

Group 13 exchange and transborylation in catalysis

• Dominic R. Willcox and
• Stephen P. Thomas

Beilstein J. Org. Chem. 2023, 19, 325–348, doi:10.3762/bjoc.19.28

• [58]. The alkyne 1 and dialkylborane reacted to give an alkenylborane 2. Transborylation with HBpin gave the alkenyl boronic ester 3 and regenerated the catalyst, HBR2. Isotopic labelling (H10Bpin) confirmed B–C(sp2)/B–H transborylation proceeded by σ-bond metathesis, and not ligand exchange. Using

• tris[3,5-bis(trifluoromethyl)phenyl]borane [59], tris(3,4,5-trifluorophenyl)borane [54], and BH3 [55][56] found to be competent catalysts of this transformation (Scheme 3a). The mechanism was proposed to be analogous to that of borane-catalysed alkyne hydroboration; alkene 4 hydroboration, followed by

• , the mechanism was proposed to occur by dehydrocoupling between the aluminium dihydride and the alkyne 1 to give an alkynylaluminium species 78. Direct hydroboration of the alkynyl aluminium species by HBpin gave a gem-aluminyl-boryl-alkene 80 which underwent selective protodemetallation with another

Continuous flow synthesis of 6-monoamino-6-monodeoxy-β-cyclodextrin

• János Máté Orosz,
• Dóra Ujj,
• Petr Kasal,
• Gábor Benkovics and
• Erika Bálint

Beilstein J. Org. Chem. 2023, 19, 294–302, doi:10.3762/bjoc.19.25

• the other hand, sodium azide in N,N-dimethylformamide (DMF) reacts with mono-6-O-tosyl-CDs to give CD monoazides in high yields. The obtained mono(6-azido-6-deoxy)-CDs (N3-CDs) are valuable precursors that can be used as starting materials in azide–alkyne click reactions; furthermore, they can be

Strategies to access the [5-8] bicyclic core encountered in the sesquiterpene, diterpene and sesterterpene series

• Cécile Alleman,
• Charlène Gadais,
• Laurent Legentil and
• François-Hugues Porée

Beilstein J. Org. Chem. 2023, 19, 245–281, doi:10.3762/bjoc.19.23

• metathesis (EYRCM) reported by Katz in 1985, represents an attractive variant of the classical RCM with the replacement of one of the alkenes by an alkyne function. Thus, EYRCM is atom economic and provides a 1,3 diene, which constitutes an ideal partner for further functionalization, typically a Diels–Alder

• the alkyne to form a carbocycle possessing a vinyl moiety, which in turn reacts with the second alkene, thus producing the expected bicyclic structure in a tandem process. Ophiobolin A (8), one of the representatives of the ophiobolin family, contains a [5-8-5] tricyclic backbone with a side chain on

• functionalized alkyne moiety prefiguring the aldehyde function of ophiobolin A (8). These two compounds were submitted to the EYRCM in the presence of G-II catalyst and furnished two different outcomes. Indeed, compound 102 gave the expected product 104 in 78% yield, whereas precursor 103, bearing hindered gem

Sequential hydrozirconation/Pd-catalyzed cross coupling of acyl chlorides towards conjugated (2E,4E)-dienones

• Benedikt Kolb,
• Daniela Silva dos Santos,
• Sanja Krause,
• Anna Zens and
• Sabine Laschat

Beilstein J. Org. Chem. 2023, 19, 176–185, doi:10.3762/bjoc.19.17

• could be converted to enones 20 by hydrozirconation followed by Pd-catalyzed acylation with acyl chlorides 21 [61]. The substrate scope required aryl units at either alkyne or acid chloride unit. Recently, we could extend this method to alkyl-substituted alkynes 16 and acetyl chloride (22), providing

• 27fa in 55% yield (Table 5, entry 1). In agreement with the previous observations, methyl substituents at the aryl moiety and/or the alkyne terminus compromised the yield (Table 5, entries 3 and 10). Furthermore, dienones 27g,i–n with bromo-, ethyl-, and ethoxycarbonyl substituents were not accessible

• the alkyne terminus significantly decreased the yield. Finally, non-natural and natural dienone-containing terpenes were synthesized such as β-ionone (3), which was available in 4 steps (6% overall yield). Thereby, the synthetic utility was demonstrated by a late-stage introduction of the dienone unit

1,4-Dithianes: attractive C2-building blocks for the synthesis of complex molecular architectures

• Bram Ryckaert,
• Ellen Demeyere,
• Frederick Degroote,
• Hilde Janssens and
• Johan M. Winne

Beilstein J. Org. Chem. 2023, 19, 115–132, doi:10.3762/bjoc.19.12

• more reactive sulfanylation reagent, the intermediate lithiated species can be captured (Scheme 6c), and sulfanylated derivative 23 is isolated as the major product. However, the sulfanylated alkyne 24 is also already prominent at −70 °C, even though the metalation was not yet complete (as judged by

• dithiinyl cation-type reagent from an alkyne-substituted 1,3-dithiolane (Scheme 18a, also compare to Scheme 4) [110]. The rearranged vinylthionium cation 112 was not isolated, but was here postulated to explain the formation of the Nazarov-type reaction product 113 that was isolated in excellent yield, and

Catalytic aza-Nazarov cyclization reactions to access α-methylene-γ-lactam heterocycles

• Bilge Banu Yagci,
• Selin Ezgi Donmez,
• Onur Şahin and
• Yunus Emre Türkmen

Beilstein J. Org. Chem. 2023, 19, 66–77, doi:10.3762/bjoc.19.6

• -silicon effect. For this purpose, we prepared the known acyl chloride 23 in four steps starting from propargyl alcohol (Scheme 5) [68]. Trimethylsilylation of propargyl alcohol (24, 89% yield) followed by reduction of the alkyne using LiAlH4 afforded the allylic alcohol 26 as a single (E) diastereomer

NaI/PPh₃-catalyzed visible-light-mediated decarboxylative radical cascade cyclization of N-arylacrylamides for the efficient synthesis of quaternary oxindoles

• Dan Liu,
• Yue Zhao and
• Frederic W. Patureau

Beilstein J. Org. Chem. 2023, 19, 57–65, doi:10.3762/bjoc.19.5

• terminal alkyne in 3an, and an alkyl chloride in 3ao proved compatible, associated with encouraging yields. In order to further demonstrate the utility of our protocol, a complex scaffold derived from lithocholic acid was tested, and was found to smoothly undergo the decarboxylative cyclization towards

Inline purification in continuous flow synthesis – opportunities and challenges

• Jorge García-Lacuna and
• Marcus Baumann

Beilstein J. Org. Chem. 2022, 18, 1720–1740, doi:10.3762/bjoc.18.182

• -butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine on polystyrene) which is valuable for reaction scale-ups [75] is used. Alternatively, a CuAAc (copper-catalyzed azide–alkyne cycloaddition) reaction has been demonstrated where the copper catalyst is supported on an Amberlist A-21 resin

Total synthesis of grayanane natural products

• Nicolas Fay,
• Rémi Blieck,
• Cyrille Kouklovsky and
• Aurélien de la Torre

Beilstein J. Org. Chem. 2022, 18, 1707–1719, doi:10.3762/bjoc.18.181

• enone 10 to the corresponding allylic alcohol, followed by a Au-catalyzed alkyne hydration, providing hemiketal 11. This intermediate was in equilibrium with hydroxy-ketone 12, which was suitable for a SmI2-promoted cyclization, affording intermediate 13 selectively, already bearing rings C and D. The

• presented some difficulties, and the authors decided to investigate the use of a free ketone. The partial hydrogenation of alkyne 72 proved to be inefficient, due to a lack of chemoselectivity involving competitive olefin reduction on the bicylo[3.2.1]octane. To overcome the over-oxidation, 72 was treated

• with m-CPBA, providing epoxide 73 as the main product in 71% yield (dr = 6:1). Lindlar hydrogenation of the alkyne and cyclization proceeded smoothly, and the tetracyclic skeleton 74 was obtained in moderate yield. However, the synthesis of pierisformaside C was never completed. The missing

A novel bis-triazole scaffold accessed via two tandem [3 + 2] cycloaddition events including an uncatalyzed, room temperature azide–alkyne click reaction

• Ksenia Malkova,
• Andrey Bubyrev,
• Vasilisa Krivovicheva,
• Dmitry Dar’in,
• Alexander Bunev and
• Mikhail Krasavin

Beilstein J. Org. Chem. 2022, 18, 1636–1641, doi:10.3762/bjoc.18.175

• proceeded further, in uncatalyzed fashion at room temperature and yielded, after intramolecular azide–alkyne click reaction novel, structurally intriguing bistriazoles. Keywords: α-acetyl-α-diazomethane sulfonamide; intramolecular click reaction; uncatalyzed; room temperature; 1,2,3-triazoles

• molecular scaffold. Pondering various opportunities for post-condensational modifications of the 1,5-disubstituted 1,2,3-triazole core according to this strategy, we turned our attention to such powerful transformation as the azide–alkyne [3 + 2] cycloaddition (also known as the azide–alkyne click reaction

• ) [6]. Indeed, if an alkyne and an azido group were strategically positioned within the structure of the amine and the aldehyde components for the reaction with 1, subsequent intramolecular azide–alkyne cycloaddition would be a feasible event which would create a polycyclic bis-1,2,3-triazole framework

Formal total synthesis of macarpine via a Au(I)-catalyzed 6-endo-dig cycloisomerization strategy

• Jiayue Fu,
• Bingbing Li,
• Zefang Zhou,
• Maosheng Cheng,
• Lu Yang and
• Yongxiang Liu

Beilstein J. Org. Chem. 2022, 18, 1589–1595, doi:10.3762/bjoc.18.169

• deprotection of the silyl group was accomplished in the presence of potassium carbonate (K2CO3) and methanol to provide the terminal alkyne 5 in 96% yield in two steps. The iodoarene 8 [12][16] was facilely synthesized from sesamol (6) via methylation and iodination in an overall yield of 67%. With the

• the electron-donating phenyl ring enabled the coordination of the alkyne with the Au+ complex in the α-position, which promoted the silyl ether to attack the β-position of the alkyne to promote a 6-endo-dig cyclization. Next, compound 11 was subjected to a solution of tetrabutylammonium fluoride (TBAF

Preparation of an advanced intermediate for the synthesis of leustroducsins and phoslactomycins by heterocycloaddition

• Anaïs Rousseau,
• Guillaume Vincent and
• Cyrille Kouklovsky

Beilstein J. Org. Chem. 2022, 18, 1385–1395, doi:10.3762/bjoc.18.143

• (Scheme 6); iodination with NIS, as previously described [29], gave lower yields. We first attempted the coupling with the terminal alkyne 19, anticipating the possibility of reducing the triple bond after coupling reaction. In agreement with literature precedents, we chose LiHMDS for deprotonation of 19

• a fast reaction in order to avoid degradation. The optimal amount of base was found to be 1.6 equivalents (Table 1, entry 4). Higher amounts lowered the yields (Table 1, entry 3), probably due to competitive enolization of the cyclic ketone. Excess alkyne was also necessary, as low yields were

• obtained when using equimolar amounts of both 19 and 11b (Table 1, entries 1 and 2). These disappointing results with alkyne 19 prompted us to investigate the coupling with an organometallic reagent derived from vinyl iodide 20. This reagent was already synthesized and coupled with acyclic ketones in

Scope of tetrazolo[1,5-a]quinoxalines in CuAAC reactions for the synthesis of triazoloquinoxalines, imidazoloquinoxalines, and rhenium complexes thereof

• Laura Holzhauer,
• Chloé Liagre,
• Olaf Fuhr,
• Nicole Jung and
• Stefan Bräse

Beilstein J. Org. Chem. 2022, 18, 1088–1099, doi:10.3762/bjoc.18.111

• investigated and the denitrogenative annulation towards imidazoloquinoxalines could be observed as a competing reaction depending on the alkyne concentration and the substitutions at the quinoxaline. Keywords: click reaction; CuAAC; denitrogenative annulation; imidazole; metal complexes; quinoxaline

• nitrogen-enriched quinoxaline-based structures. Literature-known procedures for such a quinoxaline modification starting from tetrazolo[1,5-a]quinoxalines 1 are the synthesis of 1,2,3-triazoloquinoxalines 3 via copper-catalyzed azide–alkyne cycloaddition (CuAAC) [10] and the synthesis of imidazo[1,2-a

• 1,2,3-triazoloquinoxalines 3 and imidazo[1,2-a]quinoxalines 2 under conditions known for copper-catalyzed azide–alkyne cycloaddition (CuAAC) [10]. The currently published porphyrin-catalyzed process requires glovebox conditions and the use of an expensive catalyst [11]. We intend to elucidate the

New azodyrecins identified by a genome mining-directed reactivity-based screening

• Atina Rizkiya Choirunnisa,
• Kuga Arima,
• Yo Abe,
• Noritaka Kagaya,
• Kei Kudo,
• Hikaru Suenaga,
• Junko Hashimoto,
• Manabu Fujie,
• Noriyuki Satoh,
• Kazuo Shin-ya,
• Kenichi Matsuda and
• Toshiyuki Wakimoto

Beilstein J. Org. Chem. 2022, 18, 1017–1025, doi:10.3762/bjoc.18.102

• facilitate the subsequent isolation process of the target molecules. This strategy has been successfully applied for detecting a range of peculiar functional groups, such as ureido [7], isocyanide [8], and alkyne [9][10]. A combination of reactivity-based screening and genome-based prioritization would allow

Molecular diversity of the base-promoted reaction of phenacylmalononitriles with dialkyl but-2-ynedioates

• Hui Zheng,
• Ying Han,
• Jing Sun and
• Chao-Guo Yan

Beilstein J. Org. Chem. 2022, 18, 991–998, doi:10.3762/bjoc.18.99

• multifunctionalized carboxamide-bridged dicyclopentenes in moderate to good yields and with high diastereoselectivity. Keywords: carboxamide; cycloaddition; cyclopentene; electron-deficient alkyne; phenacylmalononitrile; Introduction Phenacylmalononitrile is one of the privileged functionalized compounds [1][2][3

• -deficient alkyne resulted in adduct B. Thirdly, the intramolecular addition of the carbanion to the carbonyl group afforded species C, which in turn converted to the final product 3 by the protonation of the species C. The protonated species 5 could be successfully isolated in 12% yield after six hours when

Synthesis of novel alkynyl imidazopyridinyl selenides: copper-catalyzed tandem selenation of selenium with 2-arylimidazo[1,2-a]pyridines and terminal alkynes

• Mio Matsumura,
• Kaho Tsukada,
• Kiwa Sugimoto,
• Yuki Murata and
• Shuji Yasuike

Beilstein J. Org. Chem. 2022, 18, 863–871, doi:10.3762/bjoc.18.87

• reagents and 1,3-dipolar azide–alkyne cycloaddition based on the alkyne moiety. Keywords: alkynyl imidazopyridinyl selenide; copper catalyst; imidazo[1,2-a]pyridine; selenium; tandem reaction; terminal alkyne; Introduction Imidazo[1,2-a]pyridines are important heterocycles that serve as key functional

• limited to C(sp2)–Se–C(sp2) or C(sp2)–Se–C(sp3) bond-formation reactions. However, C(sp2)–Se–C(sp) bond formation reactions using the imidazopyridines and alkyne derivatives have not been reported to date. Based on previous reports and our ongoing investigation of the synthesis of unsymmetrical selenides

• -pot reaction, both selanyl groups from the diselenide transferred to the product 4aa. When no base was added or the amount of the base was reduced, the yield of 4aa decreased significantly (Table 1, entries 9 and 10). Moreover, increasing the amount of the alkyne 1a or Na2CO3 did not affect the

Synthesis of odorants in flow and their applications in perfumery

• Merlin Kleoff,
• Paul Kiler and
• Philipp Heretsch

Beilstein J. Org. Chem. 2022, 18, 754–768, doi:10.3762/bjoc.18.76

• -nonadien-1-al are nearly ubiquitous in modern perfumery for both women and men, even appearing in dark or woody fragrances such as Hugo Boss: Soul. In 2012, Barbaro and co-workers developed a synthesis for alkene 32 by selective hydrogenation of the corresponding alkyne (Scheme 7) [37]. Instead of using a

• Lindlar catalyst containing toxic lead salts, selectivity is achieved by the improved reaction control in flow. A solution of alkyne 31 in methanol is mixed with a stream of hydrogen and pumped at room temperature and 2.5 bar through a tubular glass column containing a Dowex-supported palladium catalyst

• . Optimization of process parameters revealed that at a conversion of 75% a good selectivity of 89% for hydrogenation of alkyne 31 to alkene 32 is achieved affording a mixture of (Z)- and (E)-isomers in a ratio of 80:20 [37]. Floral odorants Floral notes, such as rose, jasmine, orange blossom, or lavender, are

Inductive heating and flow chemistry – a perfect synergy of emerging enabling technologies

• Conrad Kuhwald,
• Sibel Türkhan and
• Andreas Kirschning

Beilstein J. Org. Chem. 2022, 18, 688–706, doi:10.3762/bjoc.18.70

• an aldehyde 5, a secondary amine 6, and a terminal alkyne 7, afforded arylpropargylamines 8 in up to 84% yield under flow conditions (Scheme 7, reaction 2). Microwave irradiation interacted with a thin foil of Cu or Au that served as catalyst inside the glass capillary. The work must be highlighted

Cholyl 1,3,4-oxadiazole hybrid compounds: design, synthesis and antimicrobial assessment

• Anas J. Rasras,
• Mohamed El-Naggar,
• Nesreen A. Safwat and
• Raed A. Al-Qawasmeh

Beilstein J. Org. Chem. 2022, 18, 631–638, doi:10.3762/bjoc.18.63

• of 22 diverse compounds. Briefly, the alkyne 3 was treated with formaldehyde, a secondary amine, and CuI as catalyst in DMSO (Scheme 3). The three components were stirred at room temperature for 3 h to furnish the desired compounds 4a–v in moderate to excellent yields [14][34]. By this route, diverse

• spectra of the synthesized compounds resonating at around δ = 68.0, 72.0, and 73.0 ppm. All aromatic compounds showed clear and correct carbon signals in the aromatic region. The two alkyne carbon atoms can be recognized for most of the compounds, while the other compounds had week signals. The two

Heteroleptic metallosupramolecular aggregates/complexation for supramolecular catalysis

• Prodip Howlader and
• Michael Schmittel

Beilstein J. Org. Chem. 2022, 18, 597–630, doi:10.3762/bjoc.18.62

• cooperative effect resulting from an additional η2-binding of the second copper(I) at the acetylene unit at which the second click reaction would take place. In case of distance mismatch, it is the formation of this copper–alkyne η2-complex that compensates for the build-up of strain as demonstrated by DFT

Synthesis of 3,4,5-trisubstituted isoxazoles in water via a [3 + 2]-cycloaddition of nitrile oxides and 1,3-diketones, β-ketoesters, or β-ketoamides

• Md Imran Hossain,
• Md Imdadul H. Khan,
• Seong Jong Kim and
• Hoang V. Le

Beilstein J. Org. Chem. 2022, 18, 446–458, doi:10.3762/bjoc.18.47

• -trisubstituted isoxazoles (Figure 1) [21][22]. Similarly, palladium catalysts were used for the electrophilic intramolecular cyclization of alkynes and aldoximes to produce 3,4,5-trisubstituted isoxazoles, but the scope of the substrates of the method was limited as the substituted 2-alkyne-1-one O-methyl oximes

Recent developments and trends in the iron- and cobalt-catalyzed Sonogashira reactions

• Surendran Amrutha,
• Sankaran Radhika and
• Gopinathan Anilkumar

Beilstein J. Org. Chem. 2022, 18, 262–285, doi:10.3762/bjoc.18.31

• reaction between an aryl/vinyl halide (Cl, Br, I, OTf) and a terminal alkyne in the presence of a Cu(I) co-catalyst under basic conditions to form a Csp2–Csp bond generating an arylalkyne is known as the Sonogashira (Sonogashira–Hagihara) coupling [1] and has become an important C–C bond-forming reaction

• products. Both, asymmetric and symmetric alkynes were synthesized by this one pot method without the use of any organic solvent. For a better yield of the coupled alkyne product, Zn powder was used as a reductant. Lower yields were obtained by the use of ortho-substituted arylynols as the substrate due to

• with XPhoS provided only 12% of the product. Both, Fe and Pd are essentially required for the successive coupling in nanocomposites, and hence iron composition plays a major role in the activity of the nanoparticles. Selective reaction between an aryl iodide/bromide with the terminal alkyne was facile