Anti-inflammatory aromadendrane- and cadinane-type sesquiterpenoids from the South China Sea sponge Acanthella cavernosa

• Shou-Mao Shen,
• Qing Yang,
• Yi Zang,
• Jia Li,
• Xueting Liu and
• Yue-Wei Guo

Beilstein J. Org. Chem. 2022, 18, 916–925, doi:10.3762/bjoc.18.91

• -dependent density functional theory/electronic circular dichroism (TDDFT-ECD) calculations or X-ray diffraction analysis. A plausible biosynthetic pathway of these sesquiterpenoids and their internal correlation were proposed and discussed. In an in vitro bioassay, (+)-aristolone (3) exhibited promising

Post-synthesis from Lewis acid–base interaction: an alternative way to generate light and harvest triplet excitons

• Hengjia Liu and
• Guohua Xie

Beilstein J. Org. Chem. 2022, 18, 825–836, doi:10.3762/bjoc.18.83

• the excited states, accounting for the decrease of band gap [27][37][43]. In 2018, Li et al. used density functional theory (DFT) to investigate the energy levels of polymers 19 (P1) and 20 (P2, Figure 10) containing pyrazine groups before and after the addition of B(C6F5)3 (see Figure 11a) [45

Synthesis of bis-spirocyclic derivatives of 3-azabicyclo[3.1.0]hexane via cyclopropene cycloadditions to the stable azomethine ylide derived from Ruhemann's purple

• Alexander S. Filatov,
• Olesya V. Khoroshilova,
• Anna G. Larina,
• Vitali M. Boitsov and
• Alexander V. Stepakov

Beilstein J. Org. Chem. 2022, 18, 769–780, doi:10.3762/bjoc.18.77

• using density functional theory (DFT) methods at the M11/cc-pVDZ level of theory. The cycloaddition reactions have been found to be HOMOcyclopropene–LUMOylide controlled while the transition-state energies for the reaction of 3-methyl-3-phenylcyclopropene with PRP are fully consistent with the

• ). Based on these observations, we concluded that electronic properties of the substituent at the C3 position of a cyclopropene ring have a major impact on the reactivity. A more detailed discussion of this issue is presented in the section devoted to the DFT (density functional theory) computational study

• ourselves exclusively to carrying out laboratory experiments. We turned to DFT calculations (M11 density functional theory) [42][43][44][45][46] to interpret the experimental results. At the beginning of the computational study, we evaluated the relative stability of prototropic tautomers which are formed

Syntheses of novel pyridine-based low-molecular-weight luminogens possessing aggregation-induced emission enhancement (AIEE) properties

• Masayori Hagimori,
• Tatsusada Yoshida,
• Yasuhisa Nishimura,
• Yukiko Ogawa and
• Keitaro Tanaka

Beilstein J. Org. Chem. 2022, 18, 580–587, doi:10.3762/bjoc.18.60

• -induced emission enhancement (AIEE) properties in aqueous media. Compounds 4a and 4e, bearing electron-withdrawing groups (Br and CF3, respectively) showed 7.0 and 15 times fluorescence enhancement. Time-dependent density functional theory (TD-DFT) calculations were performed to gain better insight into

BINOL as a chiral element in mechanically interlocked molecules

• Matthias Krajnc and
• Jochen Niemeyer

Beilstein J. Org. Chem. 2022, 18, 508–523, doi:10.3762/bjoc.18.53

• catalysts ((S)-48/(S)-49, see Figure 13) for a broad range of substrates. While the bifunctional catenane (S,S)-47 delivers enantioselectivities between 84–98% ee, the monophosphoric acids (S)-48 and (S)-49 gave lower enantiomeric excesses (12–70% ee for (S)-48 and 9–84% ee for (S)-49). Density functional

Substituent effect on TADF properties of 2-modified 4,6-bis(3,6-di-tert-butyl-9-carbazolyl)-5-methylpyrimidines

• Irina Fiodorova,
• Tomas Serevičius,
• Rokas Skaisgiris,
• Saulius Juršėnas and
• Sigitas Tumkevicius

Beilstein J. Org. Chem. 2022, 18, 497–507, doi:10.3762/bjoc.18.52

• 49 ms integration time. Solid-state samples were mounted in a closed cycle He cryostat (Cryo Industries 204 N) for PL measurements in oxygen-free conditions. Quantum chemical calculations were carried out by using density functional theory at the B3LYP/6-31G(d) level as implemented in a software

Comparative study of thermally activated delayed fluorescent properties of donor–acceptor and donor–acceptor–donor architectures based on phenoxazine and dibenzo[a,j]phenazine

• Saika Izumi,
• Prasannamani Govindharaj,
• Anna Drewniak,
• Paola Zimmermann Crocomo,
• Satoshi Minakata,
• Leonardo Evaristo de Sousa,
• Piotr de Silva,
• Przemyslaw Data and
• Youhei Takeda

Beilstein J. Org. Chem. 2022, 18, 459–468, doi:10.3762/bjoc.18.48

• the efficacy of introducing two electronic donors on the acceptor unit. The calculations employed density functional theory (DFT) with the long-range corrected ωPBE functional and the 6-31G(d,p) basis set. Tuning of the range separation parameter was performed for both molecules [20] with the results

Iridium-catalyzed hydroacylation reactions of C1-substituted oxabenzonorbornadienes with salicylaldehyde: an experimental and computational study

• Angel Ho,
• Austin Pounder,
• Krish Valluru,
• Leanne D. Chen and
• William Tam

Beilstein J. Org. Chem. 2022, 18, 251–261, doi:10.3762/bjoc.18.30

• hydride, and C–C bond-forming reductive elimination. Computational results indicate the origin of regioselectivity is involved in the reductive elimination step. Keywords: C–H activation; density functional theory; hydroacylation; iridium catalysis; regioselectivity; Introduction Organic synthesis is

• density functional theory calculations. We set out to confirm the catalytic cycle in detail, the geometries of the intermediates, the energy profiles of the reactions, and most importantly, the origin of regioselectivity. Results and Discussion Experimental We began our investigation with C1-methyl

• electron-withdrawing groups inactivates the iridium catalyst, perhaps by chelation with the carbonyl and the bridging oxygen atom. Computational Computational details All density functional theory (DFT) calculations in this study were carried out with the Gaussian 16, C.01 suite of programs [68]. Geometry

Efficient and regioselective synthesis of dihydroxy-substituted 2-aminocyclooctane-1-carboxylic acid and its bicyclic derivatives

• İlknur Polat,
• Selçuk Eşsiz,
• Uğur Bozkaya and
• Emine Salamci

Beilstein J. Org. Chem. 2022, 18, 77–85, doi:10.3762/bjoc.18.7

• -en-10-one is described. cis-9-Azabicyclo[6.2.0]dec-6-en-10-one was transformed into the corresponding amino ester and its protected amine. Oxidation of the double bond in the N-Boc-protected methyl 2-aminocyclooct-3-ene-1-carboxylate then delivered the targeted amino acid and its derivatives. Density

• -functional theory (DFT) computations were used to explain the reaction mechanism for the ring opening of the epoxide and the formation of five-membered lactones. The stereochemistry of the synthesized compounds was determined by 1D and 2D NMR spectroscopy. The configuration of methyl 6-hydroxy-9-oxo-8

Peptide stapling by late-stage Suzuki–Miyaura cross-coupling

• Hendrik Gruß,
• Rebecca C. Feiner,
• Ridhiwan Mseya,
• David C. Schröder,
• Michał Jewgiński,
• Kristian M. Müller,
• Rafał Latajka,
• Antoine Marion and
• Norbert Sewald

Beilstein J. Org. Chem. 2022, 18, 1–12, doi:10.3762/bjoc.18.1

• -helicity in water. Investigation of several derivatives by means of density functional theory (DFT) geometry optimisations indicated that substitution at indole C6 tends to induce more significant deformation of the peptide chain compared to substitution at indole C7. Moreover, introduction of an

Effect of a twin-emitter design strategy on a previously reported thermally activated delayed fluorescence organic light-emitting diode

• Ettore Crovini,
• Zhen Zhang,
• Yu Kusakabe,
• Yongxia Ren,
• Yoshimasa Wada,
• Bilal A. Naqvi,
• Prakhar Sahay,
• Tomas Matulaitis,
• Stefan Diesing,
• Ifor D. W. Samuel,
• Wolfgang Brütting,
• Katsuaki Suzuki,
• Hironori Kaji,
• Stefan Bräse and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2021, 17, 2894–2905, doi:10.3762/bjoc.17.197

• DICzTRZ were determined by a combination of NMR spectroscopy, mass spectrometry, and IR spectroscopy. Theoretical calculations Density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations in the gas phase at the PBE0/6-31G(d,p) level reveal the potential of DICzTRZ as a TADF material. The

Iron-catalyzed domino coupling reactions of π-systems

• Austin Pounder and
• William Tam

Beilstein J. Org. Chem. 2021, 17, 2848–2893, doi:10.3762/bjoc.17.196

• provided the desired carboamination product 164. By using methyl cinnamate derivatives, the reactions were highly diastereoselective for the formation of 1,2-anti carboamination products. Notably, the Ritter reaction was found to be the origin of diastereoselectivity on the basis of a density functional

Recent advances in the asymmetric phosphoric acid-catalyzed synthesis of axially chiral compounds

• Alemayehu Gashaw Woldegiorgis and
• Xufeng Lin

Beilstein J. Org. Chem. 2021, 17, 2729–2764, doi:10.3762/bjoc.17.185

• density functional theory calculations [46]. Recently, Shi, Lin and co-workers reported the atroposelective synthesis of axially chiral biaryls by Pd(II)-catalyzed free amine-directed atroposelective C–H olefination using chiral spirophosphoric acid CPA 5 as an efficient ligand and Ag2CO3 as the oxidant

• the desired axially chiral pyrazole derivatives 56 in good yields (up to 99%) with excellent enantioselectivities (up to 98% ee, Scheme 19). Density functional theory calculations revealed that the chiral phosphoric acid acts as a proton-transfer shuttle to assist proton transfer from the OH group of

• ′-binaphthalenes (BINAMs) from achiral N,N′-binaphthylhydrazines (Scheme 1). In the presence of chiral phosphoric acids (CPA 1), the reaction undergoes a simple [3,3]-sigmatropic rearrangement, giving the corresponding products 2 in good yield (up to 88%) and enantioselectivity (up to 93:7 er). The density

Recent advances in organocatalytic asymmetric aza-Michael reactions of amines and amides

• Pratibha Sharma,
• Raakhi Gupta and
• Raj K. Bansal

Beilstein J. Org. Chem. 2021, 17, 2585–2610, doi:10.3762/bjoc.17.173

• enantioselectivity (47–98% ee). The observed results were rationalized with density functional theory calculations (Table 8) [42]. 1.3 Reactions catalyzed by chiral amines He and co-workers developed heterogeneous synergistic catalysis using chiral amines SBA-15 (cat. 44), which promote aza-Michael–Henry cascade

Synthesis and investigation on optical and electrochemical properties of 2,4-diaryl-9-chloro-5,6,7,8-tetrahydroacridines

• Najeh Tka,
• Mohamed Adnene Hadj Ayed,
• Mourad Ben Braiek,
• Mahjoub Jabli and
• Peter Langer

Beilstein J. Org. Chem. 2021, 17, 2450–2461, doi:10.3762/bjoc.17.162

• their HOMO/LUMO energy levels were estimated by cyclic voltammetry measurements. Besides, density functional theory calculations were carried out for further exploration of their electronic properties. Keywords: catalysis; cross-coupling; cyclization; fluorescence; palladium; Introduction π-Conjugated

• a PGSTAT30 Autolab potentiostat. Theoretical calculations The theoretical studies were realized in vacuum with the Gaussian 09 program [70]. The geometry of the equilibrium conformer at the ground state was first found at AM1 level. Then, further optimization through density functional theory (DFT

Nomimicins B–D, new tetronate-class polyketides from a marine-derived actinomycete of the genus Actinomadura

• Zhiwei Zhang,
• Tao Zhou,
• Taehui Yang,
• Keisuke Fukaya,
• Enjuro Harunari,
• Shun Saito,
• Katsuhisa Yamada,
• Chiaki Imada,
• Daisuke Urabe and
• Yasuhiro Igarashi

Beilstein J. Org. Chem. 2021, 17, 2194–2202, doi:10.3762/bjoc.17.141

• (Table S1, Supporting Information File 1) and 3JHH coupling constants [15]. The absolute configuration of 1 was deduced to be the same as 4 in consideration of the overall similarity of the electronic circular dichroism (ECD) spectra of 1 and 4 (Figure 4). This proposition was evidenced by the density

• functional theory (DFT) calculation of the ECD spectrum for 4, for which the absolute configuration was established by the modified Mosher’s method in our previous work [15]. Since the acyltetronic acid exists as a mixture of keto–enol tautomers, the calculation was carried out using the four possible

Constrained thermoresponsive polymers – new insights into fundamentals and applications

• Patricia Flemming,
• Alexander S. Münch,
• Andreas Fery and
• Petra Uhlmann

Beilstein J. Org. Chem. 2021, 17, 2123–2163, doi:10.3762/bjoc.17.138

• density functional theory, the temperature-dependent swelling behavior of a polymer brush could be simulated in comparison to the corresponding phase diagrams of the free, unbound polymer chains in solution [124]. The corresponding diagrams are summarized in Figure 7 and show the typical thickness

Electron-rich triarylphosphines as nucleophilic catalysts for oxa-Michael reactions

• Susanne M. Fischer,
• Simon Renner,
• A. Daniel Boese and
• Christian Slugovc

Beilstein J. Org. Chem. 2021, 17, 1689–1697, doi:10.3762/bjoc.17.117

• radical cations of the phosphines under investigation were calculated by density functional theory (DFT), namely B3LYP-def2-TZVPPD. According to criterion introduced by Stewart et al. postulating air stability of phosphines when the SOMO energy is higher than −10 eV, the three derivatives should be air

2,4-Bis(arylethynyl)-9-chloro-5,6,7,8-tetrahydroacridines: synthesis and photophysical properties

• Najeh Tka,
• Mohamed Adnene Hadj Ayed,
• Mourad Ben Braiek,
• Mahjoub Jabli,
• Noureddine Chaaben,
• Kamel Alimi,
• Stefan Jopp and
• Peter Langer

Beilstein J. Org. Chem. 2021, 17, 1629–1640, doi:10.3762/bjoc.17.115

• molecules have been examined. Additionally, theoretical studies based on density functional theory (DFT/B3LYP/6-31G(d)) were carried out. Keywords: alkynes; catalysis; cross-coupling; heterocycles; palladium; Introduction The development and design of small π-conjugated molecules have attracted increasing

• . In order to elucidate these experimental observations, quantum chemical calculations based on density functional theory (DFT) methodology were performed. The estimated visualization of highest occupied and lowest unoccupied molecular orbitals, as well as the molecular electrostatic potential (MEP) of

• equilibrium conformer at ground state was first found at AM1 level. Then, further optimizations through density functional theory (DFT) approach [73] at the restricted Becke3–Lee–Yang–Parr hybrid functional (B3LYP) with standard basis set 6-31G were carried out. Experimental procedure and spectroscopic data

Double-headed nucleosides: Synthesis and applications

• Vineet Verma,
• Jyotirmoy Maity,
• Vipin K. Maikhuri,
• Ritika Sharma,
• Himal K. Ganguly and
• Ashok K. Prasad

Beilstein J. Org. Chem. 2021, 17, 1392–1439, doi:10.3762/bjoc.17.98

Structural effects of meso-halogenation on porphyrins

• Keith J. Flanagan,
• Maximilian Paradiz Dominguez,
• Zoi Melissari,
• Hans-Georg Eckhardt,
• René M. Williams,
• Dáire Gibbons,
• Caroline Prior,
• Gemma M. Locke,
• Alina Meindl,
• Aoife A. Ryan and
• Mathias O. Senge

Beilstein J. Org. Chem. 2021, 17, 1149–1170, doi:10.3762/bjoc.17.88

• . Additionally, we have used density functional theory calculations to determine the structure of several halogenated porphyrins. This contrasts conformational analysis with existing X-ray structures and gives a method to characterize samples that are difficult to crystallize. By using the methods outlined above

• formation of the crystal networks. This is complemented with the use of density functional theory (DFT) calculation of structures that have currently not been determined due to difficulties of obtained crystals of sufficient quality for X-ray determination. Additionally, DFT calculations were conducted for

Prins cyclization-mediated stereoselective synthesis of tetrahydropyrans and dihydropyrans: an inspection of twenty years

• Asha Budakoti,
• Pradip Kumar Mondal,
• Prachi Verma and
• Jagadish Khamrai

Beilstein J. Org. Chem. 2021, 17, 932–963, doi:10.3762/bjoc.17.77

• and co-workers explained the formation of all-cis-2,4,6-trisubstituted THPs with the help of density functional theory (DFT) and stated that in the presence of an external nucleophile, the stabilization of the carbocation intermediate is favored through hyperconjugation [28]. The vacant p-orbital of

Synthesis, structural characterization, and optical properties of benzo[f]naphtho[2,3-b]phosphoindoles

• Mio Matsumura,
• Takahiro Teramoto,
• Masato Kawakubo,
• Masatoshi Kawahata,
• Yuki Murata,
• Kentaro Yamaguchi,
• Masanobu Uchiyama and
• Shuji Yasuike

Beilstein J. Org. Chem. 2021, 17, 671–677, doi:10.3762/bjoc.17.56

• ]. Unfortunately, the electrochemistry of some compounds could not be determined under the conditions available to us. Therefore, computational investigations are particularly useful for understanding the trends of the electrochemical and photophysical properties of molecular materials. Density functional theory

Mesoionic tetrazolium-5-aminides: Synthesis, molecular and crystal structures, UV–vis spectra, and DFT calculations

• Vladislav A. Budevich,
• Sergei V. Voitekhovich,
• Alexander V. Zuraev,
• Vadim E. Matulis,
• Vitaly E. Matulis,
• Alexander S. Lyakhov,
• Ludmila S. Ivashkevich and
• Oleg A. Ivashkevich

Beilstein J. Org. Chem. 2021, 17, 385–395, doi:10.3762/bjoc.17.34

• structures are known [17][28]. Thus, the information on tetrazole-5-aminides is very limited and fragmentary. In the present work, we try to fill this gap by carrying out experimental (synthesis, X-ray, UV–vis) and theoretical density functional theory (DFT) studies of some selected 1,3-dialkyltetrazolium-5

• –vis spectra and charge transfer were carried out within density functional theory for ground states and time-dependent density functional theory (TD-DFT) for excited states using the τ-dependent hybrid tHCTHhyb functional [37] with the 6-311+G(2d,p) basis set [38]. The chosen functional allows to

Diels–Alder reaction of β-fluoro-β-nitrostyrenes with cyclic dienes

• Savva A. Ponomarev,
• Roman V. Larkovich,
• Alexander S. Aldoshin,
• Andrey A. Tabolin,
• Sema L. Ioffe,
• Jonathan Groß,
• Till Opatz and
• Valentine G. Nenajdenko

Beilstein J. Org. Chem. 2021, 17, 283–292, doi:10.3762/bjoc.17.27

• of CPD with the model nitrostyrene 1h was simulated in silico to predict the reaction pathway, the reaction rate constants, and the activation enthalpies. Density functional theory calculations were conducted for the reactants, products, and transition states using the B3LYP [64][65][66] and M062X