Disposable cartridge concept for the on-demand synthesis of turbo Grignards, Knochel–Hauser amides, and magnesium alkoxides

• Mateo Berton,
• Kevin Sheehan,
• Andrea Adamo and
• D. Tyler McQuade

Beilstein J. Org. Chem. 2020, 16, 1343–1356, doi:10.3762/bjoc.16.115

• of the corresponding Grignard intermediate in the presence of ZnCl2 and LiCl, which were subsequently used in Negishi cross-coupling reactions [41]. The most recent example, by the Löb group, reported a pilot plant reactor including a Mg replenish unit that allowed to generate phenylmagnesium bromide

Highly selective Diels–Alder and Heck arylation reactions in a divergent synthesis of isoindolo- and pyrrolo-fused polycyclic indoles from 2-formylpyrrole

• Carlos H. Escalante,
• Eder I. Martínez-Mora,
• Carlos Espinoza-Hicks,
• Alejandro A. Camacho-Dávila,
• Fernando R. Ramos-Morales,
• Francisco Delgado and
• Joaquín Tamariz

Beilstein J. Org. Chem. 2020, 16, 1320–1334, doi:10.3762/bjoc.16.113

• similar chemoselectivity has been previously observed, being explained as a consequence of the acidity of the C–H bond being cleaved [6][44]. Additional intramolecular cross-coupling reactions were carried out by utilizing dimethyl malonates 8k and 8l, which were prepared through the N-benzylation of 16c

• approach to the fused aza-heterocyclic pentacycle 12. Preparation of 1,2-substituted pyrroles 8a–h.a Diels–Alder reactions of 2-vinylpyrroles 8a–j and 16a,b with maleimides 7b,c.a Heck cross-coupling reactions of 9g–j and 9m for the preparation of pentacycles 11a–e.a Synthesis of tetrahydropyrrolo[3,4-e

Activated carbon as catalyst support: precursors, preparation, modification and characterization

• Melanie Iwanow,
• Tobias Gärtner,
• Volker Sieber and
• Burkhard König

Beilstein J. Org. Chem. 2020, 16, 1188–1202, doi:10.3762/bjoc.16.104

• phenol by oxidative coupling reactions and acidic functional groups decrease the amount of adsorbed phenol [51][127][128]. Duman and co-workers studied different pyrolysis temperatures and activation times with ZnCl2 for the preparation of highly porous activated carbon from fruit stones and nutshells

Palladium-catalyzed regio- and stereoselective synthesis of aryl and 3-indolyl-substituted 4-methylene-3,4-dihydroisoquinolin-1(2H)-ones

• Valeria Nori,
• Antonio Arcadi,
• Armando Carlone,
• Fabio Marinelli and
• Marco Chiarini

Beilstein J. Org. Chem. 2020, 16, 1084–1091, doi:10.3762/bjoc.16.95

• stereoselective Pd-catalyzed cascade reactions, consisting of the addition of in situ-generated arylpalladium complexes over a proximate carbon–carbon triple bond, followed by cross-coupling reactions, have been reported [26][27][28][29][30][31]. Our continuing interest in the palladium-catalyzed reactions of

• 4 and 6 was unambiguously confirmed by NMR spectroscopy [43]. Conclusion In conclusion, we have demonstrated that cascade cyclocarbopalladations of the readily available aryl/alkyl-substituted N-propargyl-2-iodobenzamides 2 followed by Suzuki–Miyaura coupling reactions with arylboronic acids, in the

Fluorinated phenylalanines: synthesis and pharmaceutical applications

• Laila F. Awad and
• Mohammed Salah Ayoup

Beilstein J. Org. Chem. 2020, 16, 1022–1050, doi:10.3762/bjoc.16.91

• reported herein different methods for their synthesis. 1.1. Negishi cross coupling of aryl halide and organozinc compounds Jackson and co-workers reported the synthesis of a range of phenylalanine derivatives via Negishi cross-coupling reactions of aryl halides and Zn homoenolates of the protected (R

• targeted compounds 88a,b (Scheme 20). Cross-coupling reactions with boronic acids were found to be successful only for the synthesis of para and meta-derivatives. Several attempts were made to prepare the ortho-substituted derivatives 93 and 95. The synthesis of ᴅ,ʟ-93 or ʟ-95 was achieved by vinylation of

• 1b and 1c with iodoalanine 2 at room temperature using Pd2(dba)3 (2.5 mol %) and SPhos (5.0 mol %) provided excellent yields of (S)-phenylalanines 3a (70% yield) and 3b (80% yield), respectively. Such an efficiency improvement testifies to the suitability of SPhos as a ligand for these coupling

Copper-catalysed alkylation of heterocyclic acceptors with organometallic reagents

• Yafei Guo and
• Syuzanna R. Harutyunyan

Beilstein J. Org. Chem. 2020, 16, 1006–1021, doi:10.3762/bjoc.16.90

• functionalised alkyl chains at the β-position of the alkenylpyridines, the catalytic system also showed a high functional group tolerance, and thus allowing straightforward chemical transformations of the addition products, including, for example, reductions, cycloadditions, and coupling reactions (Scheme 15B

Aryl-substituted acridanes as hosts for TADF-based OLEDs

• Naveen Masimukku,
• Dalius Gudeika,
• Oleksandr Bezvikonnyi,
• Ihor Syvorotka,
• Rasa Keruckiene,
• Dmytro Volyniuk and
• Juozas V. Grazulevicius

Beilstein J. Org. Chem. 2020, 16, 989–1000, doi:10.3762/bjoc.16.88

• according to the reported procedure [28]. The subsequent alkylation of 1 using bromoethane afforded the N-ethylated dibromo compound 2 in 80% yield. The target compounds 3–6 were then obtained by Suzuki cross-coupling reactions between brominated acridan 2 and the respective phenylboronic acids in the

Accelerating fragment-based library generation by coupling high-performance photoreactors with benchtop analysis

• Quentin Lefebvre,
• Christophe Salomé and
• Thomas C. Fessard

Beilstein J. Org. Chem. 2020, 16, 982–988, doi:10.3762/bjoc.16.87

• collections. These are of high value to medicinal chemists to provide defined exit vectors and facilitate rational lead evolution [2][3][4][5][6][7]. Thus, we were interested in developing reliable synthetic methods and technologies to apply metal-catalyzed cross-coupling reactions to such scaffolds, which

• -catalyzed cross-coupling reactions [9]. Recently, milder cross-coupling methods using more abundant and affordable metals such as nickel, in combination with photochemistry or electrochemistry, significantly improved accessibility to N-arylated complex amines [10][11][12]. Results and Discussion As we

• reactions, and ranged from 6% to 50% for copper-catalyzed cross-coupling reactions [13]. Much information could be obtained from this screening. Electron-deficient aryl bromides led to better yields than neutral and electron-rich partners, as observed in previous reports on photochemically- or

Pd-catalyzed asymmetric Suzuki–Miyaura coupling reactions for the synthesis of chiral biaryl compounds with a large steric substituent at the 2-position

• Yongsu Li,
• Bendu Pan,
• Xuefeng He,
• Wang Xia,
• Yaqi Zhang,
• Hao Liang,
• Chitreddy V. Subba Reddy,
• Rihui Cao and
• Liqin Qiu

Beilstein J. Org. Chem. 2020, 16, 966–973, doi:10.3762/bjoc.16.85

Bipyrrole boomerangs via Pd-mediated tandem cyclization–oxygenation. Controlling reaction selectivity and electronic properties

• Liliia Moshniaha,
• Marika Żyła-Karwowska,
• Joanna Cybińska,
• Piotr J. Chmielewski,
• Ludovic Favereau and
• Marcin Stępień

Beilstein J. Org. Chem. 2020, 16, 895–903, doi:10.3762/bjoc.16.81

• disadvantage may be obviated by transition-metal-mediated double C–H bond activation [22][23], which is functionally equivalent to conventional oxidative coupling reactions, and has become a powerful synthetic tool with a rapidly growing scope of use [24][25][26]. However, in the field of π-conjugated

Synthesis of new asparagine-based glycopeptides for future scanning tunneling microscopy investigations

• Laura Sršan and
• Thomas Ziegler

Beilstein J. Org. Chem. 2020, 16, 888–894, doi:10.3762/bjoc.16.80

• investigation of the self assembly of such glycopeptides on metal surfaces will be performed via pMS and STM in further studies. Description of the starting materials 1a–f and 2a–f. Peptide coupling reactions, including the previous Fmoc cleavage. Cleavage of the fully protected peptides 6 and 7. Yields of the

• peptide coupling reactions and comparison of HBTU and HATU. Final deprotection yields of 10a–f and 11a–f. Supporting Information Supporting Information File 15: General methods, experimental procedures, and product characterization data of the compounds 1a–f to 11a–f. Supporting Information File 16: NMR

Towards triptycene functionalization and triptycene-linked porphyrin arrays

• Gemma M. Locke,
• Keith J. Flanagan and
• Mathias O. Senge

Beilstein J. Org. Chem. 2020, 16, 763–777, doi:10.3762/bjoc.16.70

• complexes such as 2 were synthesized by us with the purpose of conducting electron transfer studies [25]. Both Suzuki and Sonogashira cross-coupling reactions were employed to realize this new class of triptycene-linked trimeric porphyrins. The three porphyrins, or three BODIPYs in 2 were either linked

• as before. After silica gel column chromatography, a dark purple solid of 16 was isolated in 8% yield. The unsymmetrically substituted triptycene 12 was utilized for several other cross-coupling reactions, including one with the dibrominated porphyrin 17c which was prepared via metalation of 17b and

• of various porphyrin/BODIPY dimers with different linker groups in CHCl3. The excitation for compounds 9, 7, 19 and 20 was λ = 433 (23095), 370 (27027), 455 (21978) and 450 (22222) nm (cm−1), respectively. Sonogashira cross-coupling reactions to form symmetric porphyrin and BODIPY triptycene-linked

Efficient synthesis of dipeptide analogues of α-fluorinated β-aminophosphonates

• Marcin Kaźmierczak and
• Henryk Koroniak

Beilstein J. Org. Chem. 2020, 16, 756–762, doi:10.3762/bjoc.16.69

• -aminophosphonates 15 was presented. These compounds were prepared in a four-step sequence starting from N,N-dibenzylamino aldehydes 5. Each step of the synthesis has been optimized to provide very good yields (Pudovik, deoxyfluorination and amine–acid coupling reactions). Furthermore, the absolute configuration of

Recent advances in Cu-catalyzed C(sp³)–Si and C(sp³)–B bond formation

• Balaram S. Takale,
• Ruchita R. Thakore,
• Elham Etemadi-Davan and
• Bruce H. Lipshutz

Beilstein J. Org. Chem. 2020, 16, 691–737, doi:10.3762/bjoc.16.67

• incorporating silicon or boron into new or existing drugs, in addition to their use as building blocks in cross-coupling reactions en route to various targets of both natural and unnatural origins. In this review, recent protocols relying on copper-catalyzed sp3 carbon–silicon and carbon–boron bond-forming

• ] are common partners in a variety of important cross-coupling reactions. They are also especially valuable precursors to other functional groups such as organic halides, alcohols [5][6][7], etc. Moreover, recent drug discovery efforts have shifted towards the incorporation of these non-natural

Direct borylation of terrylene and quaterrylene

• Haruka Kano,
• Keiji Uehara,
• Kyohei Matsuo,
• Hironobu Hayashi,
• Hiroko Yamada and
• Naoki Aratani

Beilstein J. Org. Chem. 2020, 16, 621–627, doi:10.3762/bjoc.16.58

• , 2) the product obtained is soluble in common organic solvents so that the separation and characterization would be readily performed, and 3) the resultant pure soluble terrylene derivative as a versatile unit can be functionalized by using conventional metal-catalyzed coupling reactions. Results and

Regioselectively α- and β-alkynylated BODIPY dyes via gold(I)-catalyzed direct C–H functionalization and their photophysical properties

• Takahide Shimada,
• Shigeki Mori,
• Masatoshi Ishida and
• Hiroyuki Furuta

Beilstein J. Org. Chem. 2020, 16, 587–595, doi:10.3762/bjoc.16.53

• Glaser-coupling reactions [37]. Conventionally, an alkynylation of the BODIPY core has been achieved by palladium-catalyzed Sonogashira cross-coupling with halogenated BODIPYs (Figure 1b) [35][37]. However, due to the coexistence of multiple C–H bonds, a regioselective direct C–H alkynylation of the

Efficient synthesis of 3,6,13,16-tetrasubstituted-tetrabenzo[a,d,j,m]coronenes by selective C–H/C–O arylations of anthraquinone derivatives

• Seiya Terai,
• Yuki Sato,
• Takuya Kochi and
• Fumitoshi Kakiuchi

Beilstein J. Org. Chem. 2020, 16, 544–550, doi:10.3762/bjoc.16.51

• alkyl and alkoxy substituents at the 3, 6, 13, and 16-positions was achieved based on the ruthenium-catalyzed coupling reactions of anthraquinone derivatives with arylboronates via C–H and C–O bond cleavage. The reaction sequence involving the arylation, carbonyl methylenation, and oxidative cyclization

• groups to form biaryl frameworks. Traditionally, transition-metal-catalyzed cross-coupling reactions of aryl halides or pseudohalides with arylmetal reagents have been employed for the connection of two aryl units [5][6][7][8][9]. However, in search of more efficient synthetic routes, C–H arylation

Copper-catalyzed enantioselective conjugate reduction of α,β-unsaturated esters with chiral phenol–carbene ligands

• Shohei Mimura,
• Sho Mizushima,
• Yohei Shimizu and
• Masaya Sawamura

Beilstein J. Org. Chem. 2020, 16, 537–543, doi:10.3762/bjoc.16.50

• plays crucial roles in both the catalytic activity and stereoselectivity [19][20][21]. Notably, these catalyst systems were also applicable for three-component coupling reactions using hydrosilanes as hydride reagents [17]. Based on this knowledge, we decided to investigate the effects of the phenol–NHC

Copper-catalyzed remote C–H arylation of polycyclic aromatic hydrocarbons (PAHs)

• Anping Luo,
• Min Zhang,
• Zhangyi Fu,
• Jingbo Lan,
• Di Wu and
• Jingsong You

Beilstein J. Org. Chem. 2020, 16, 530–536, doi:10.3762/bjoc.16.49

• molecules, thus having drawn much attention. Transition metal-catalyzed C–X/C–M cross-coupling reactions such as Suzuki and Stille couplings are the main approaches to achieve the arylation of PAHs [7][8][9][10][11]. However, the selective arylation of the C7-position of 1-naphthoic acid derivatives remains

Synthesis of triphenylene-fused phosphole oxides via C–H functionalizations

• Md. Shafiqur Rahman and
• Naohiko Yoshikai

Beilstein J. Org. Chem. 2020, 16, 524–529, doi:10.3762/bjoc.16.48

• phosphole oxides through C–H functionalization and cross-coupling reactions. The phosphole ring was constructed in the early stage of the synthesis by a three-component assembly method featuring a 1,4-cobalt migration as the key step. Unlike other C–H activation/alkyne annulation approaches to benzo[b

Controlling alkyne reactivity by means of a copper-catalyzed radical reaction system for the synthesis of functionalized quaternary carbons

• Goki Hirata,
• Yu Yamane,
• Naoya Tsubaki,
• Reina Hara and
• Takashi Nishikata

Beilstein J. Org. Chem. 2020, 16, 502–508, doi:10.3762/bjoc.16.45

• related coupling reactions [2][3][4]. Although there are many reports on alkyne transformations, one recent development in this area has been the reaction of alkynes with tertiary alkyl electrophiles to produce functionalized quaternary carbon atoms via addition [5][6][7][8][9][10] or coupling [11][12][13

KOt-Bu-promoted selective ring-opening N-alkylation of 2-oxazolines to access 2-aminoethyl acetates and N-substituted thiazolidinones

• Qiao Lin,
• Shiling Zhang and
• Bin Li

Beilstein J. Org. Chem. 2020, 16, 492–501, doi:10.3762/bjoc.16.44

• to synthesize thiazolidinone derivatives through a Barton–McCombie pathway in 2015 [17] (Scheme 1b). Recently, potassium tert-butoxide has been shown to be an efficient promoter for C–C-bond formation reactions [18][19][20][21][22]. However, only few reports described C–N-bond cross-coupling

• reactions using potassium tert-butoxide as promoter. Wu developed an efficient protocol for the KOt-Bu-promoted synthesis of 1-aminoisoquinolines from 2-methylbenzonitriles and benzonitriles [23], and the carbonylative cyclization of propargylic amines with selenium under CO gas-free conditions [24]. Based

Synthesis of 4-amino-5-fluoropyrimidines and 5-amino-4-fluoropyrazoles from a β-fluoroenolate salt

• Tobias Lucas,
• Jule-Philipp Dietz and
• Till Opatz

Beilstein J. Org. Chem. 2020, 16, 445–450, doi:10.3762/bjoc.16.41

• obtained in excellent yields of 93% and 97%, respectively, and represent potential substrates for subsequent cross-coupling reactions, which would provide structurally more complex products. Amidines with heterocyclic substituents were also evaluated. While the pyridine-substituted derivative 10o furnished

Room-temperature Pd/Ag direct arylation enabled by a radical pathway

• Amy L. Mayhugh and
• Christine K. Luscombe

Beilstein J. Org. Chem. 2020, 16, 384–390, doi:10.3762/bjoc.16.36

• groups. 2-Substituted benzoic acids in general, and 2-nitrobenzoic acid in particular, are reactive substrates in decarboxylative coupling reactions [16][17]. However, more forceful conditions are typically required than used in the room-temperature system. Indeed, a very similar Pd/Ag system has been

Copper-promoted/copper-catalyzed trifluoromethylselenolation reactions

• Clément Ghiazza and
• Anis Tlili

Beilstein J. Org. Chem. 2020, 16, 305–316, doi:10.3762/bjoc.16.30

• could be trifluoromethylselenolated that way (Scheme 2) [13][15][16][17]. Mechanistically, the authors postulated the involvement of copper(I)/(III) oxidation states. Oxidative cross-coupling reactions between terminal alkynes using the [(bpy)CuSeCF3]2 complex were also undertaken by the same group to

• yields, as can be seen in Scheme 12 [35]. Due to the limitations of ClSeCF3 as an electrophilic reagent for trifluoromethylselenolations in cross-coupling reactions, our group developed a new bench-stable reagent, namely trifluoromethyltolueneselenosulfonate (TsSeCF3) [36

• already demonstrated its versatility in numerous processes. Nevertheless, its use in oxidative cross-coupling reactions requires stoichiometric amounts of the oxidant, which limits the attractiveness of the method in some cases. Finally, the newly developed electrophilic reagent TsSeCF3 also demonstrated