Advances in mercury(II)-salt-mediated cyclization reactions of unsaturated bonds

• Sumana Mandal,
• Raju D. Chaudhari and
• Goutam Biswas

Beilstein J. Org. Chem. 2021, 17, 2348–2376, doi:10.3762/bjoc.17.153

• ]. Recently, a Hg(OTf)2-catalyzed one-pot cyclization of nitroalkyne 175 and alkyne had been reported to synthesize indole derivatives 176. Based on this strategy, the one-pot method to synthesize indole derivatives had been developed [112]. Similarly, benzo[c]isoxazole was also formed in excellent yields

• -methylenepiperidine. a) Preparation of indole derivatives through cycloisomerization of 2-ethynylaniline and b) its mechanism. a) Hg(OTf)2-catalyzed synthesis of 3-indolinones and 3-coumaranones and b) simplified mechanism. a) Hg(OTf)2-catalyzed one pot cyclization of nitroalkyne and b) its plausible mechanism

A visible-light-induced, metal-free bis-arylation of 2,5-dichlorobenzoquinone

• Pieterjan Winant and
• Wim Dehaen

Beilstein J. Org. Chem. 2021, 17, 2315–2320, doi:10.3762/bjoc.17.149

• effectiveness of our strategy, the necessity of isolating the potentially hazardous diazonium salt may be seen as an important disadvantage. Arylating the quinone starting directly from the aniline in a one-pot procedure would effectively avoid the need for isolation of the potentially explosive salt and

Recent advances in the syntheses of anthracene derivatives

• Giovanni S. Baviera and
• Paulo M. Donate

Beilstein J. Org. Chem. 2021, 17, 2028–2050, doi:10.3762/bjoc.17.131

• -workers reported a one-pot synthesis of substituted anthracenes 37 from o-tolualdehyde 34 and aryl iodides 35 via a palladium-catalyzed C–H arylation with a silver oxidant (Scheme 8) [42]. During optimization studies, the authors noted that steric and electronic effects strongly affected the cyclization

• . Although other methodologies were available, the authors chose to employ lithium aluminum hydride (LAH) to reduce the substituted anthraquinones 67 to the corresponding anthracenes 68, to obtain very good yields (81–90%) [48]. In 2016, Glöcklhofer and co-workers developed a versatile one-pot procedure for

• 2012, Singh and co-workers performed green syntheses of oxa-aza-benzo[a]anthracene and oxa-aza-phenanthrene derivatives 151 and 152 via a sequential one-pot reaction in an aqueous micellar system (Scheme 34) [68]. This methodology comprised reactions of isoquinoline (147), phenacyl bromides 148 bearing

Correction: One-pot multicomponent green Hantzsch synthesis of 1,2-dihydropyridine derivatives with antiproliferative activity

• Giovanna Bosica,
• Kaylie Demanuele,
• José M. Padrón and
• Adrián Puerta

Beilstein J. Org. Chem. 2021, 17, 2026–2027, doi:10.3762/bjoc.17.130

• 10.3762/bjoc.17.130 Keywords: antiproliferative activity; 1,2-dihydropyridines; green Hantzsch synthesis; heterogeneous catalysis; one-pot multicomponent reaction; The authors noticed that the E-factor (E) was calculated using a wrong Equation 2 in the original publication: The correct Equation 2 should

Progress and challenges in the synthesis of sequence controlled polysaccharides

• Giulio Fittolani,
• Theodore Tyrikos-Ergas,
• Denisa Vargová,
• Manishkumar A. Chaube and
• Martina Delbianco

Beilstein J. Org. Chem. 2021, 17, 1981–2025, doi:10.3762/bjoc.17.129

• (6mer, 8mer, 10mer and 12mer) following a convergent preactivation-based iterative strategy [135]. These compounds were subsequently conjugated to keyhole limpet hemocyanin, revealing that the length of the glucans affected the immunogenic properties. A pre-activation-based iterative one-pot

• COS, which requires tedious purification steps. Furthermore, degradation of natural chitin often lacks proper control over the pattern of acetylation (PA). Acetolysis also often leads to heterogeneous mixtures [232][233][234][235]. A controlled acetolysis of chitin, followed by the one-pot trans-N

Asymmetric organocatalyzed synthesis of coumarin derivatives

• Natália M. Moreira,
• Lorena S. R. Martelli and
• Arlene G. Corrêa

Beilstein J. Org. Chem. 2021, 17, 1952–1980, doi:10.3762/bjoc.17.128

• acid (4) as catalyst [30]. Based on this pioneer work, our research group described an efficient, highly stereoselective, one-pot process comprising an organocatalytic conjugate addition of dimedone or 4-hydroxycoumarin 1 to α,β-unsaturated aldehydes 2 followed by an intramolecular isocyanide-based

• obtained with good to excellent yields and enantiomeric excesses. Besides, the one-pot synthesis of coumarins followed by the Michael addition step was proven to be a good alternative, affording the desired product with excellent yield and ee. The applicability of the methodology was also demonstrated by a

• stereoselective one-pot procedure for the synthesis of five-membered annulated coumarins 28 was described by the group of Enders [40]. Using dual catalysis, with a cinchona primary amine derivative 22 and silver carbonate, a series of functionalized coumarin derivatives 28 were obtained in good yields (up to 91

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

• were found to be unreactive, probably due to steric hindrance. The one-pot difunctionalization of arenes involving a sequential C–O cleavage and C(sp2)–H activation mediated by chromium was recently reported by Luo and Zeng [124]. The reaction allows an ortho-directed diarylation of o

• target lactone in 61% yield over two steps. The final steps involved a one-pot ozonolysis with quenching under Pinnick oxidation conditions to afford the carboxylic acid derivative in 83% yield, followed by White’s selective C–H oxidation (Scheme 26B). White’s selective C–H oxidation was also applied in

• behaves as a terminal oxidant to form α-aminoalkyl radicals, whereas the formation of an Fe-peroxo species in the catalytic cycle was confirmed using a combination of EPR and ESI mass spectrometry experiments (Scheme 31D). One-pot processes for the synthesis of benzo[b]furans from aryl- or alkylketones

Development of N-F fluorinating agents and their fluorinations: Historical perspective

• Teruo Umemoto,
• Yuhao Yang and
• Gerald B. Hammond

Beilstein J. Org. Chem. 2021, 17, 1752–1813, doi:10.3762/bjoc.17.123

• etherate and thus solved the problem with a simple two-step one-pot method; (step 1) fluorination of a mixture of DABCO and 1.5 molar equivalents of H2SO4 with 10% F2/N2 in acetonitrile at −20 °C, and (step 2) treatment of the resulting reaction mixture with 2.1 molar equivalents of BF3 etherate at −20 °C

2,4-Bis(arylethynyl)-9-chloro-5,6,7,8-tetrahydroacridines: synthesis and photophysical properties

• Najeh Tka,
• Mohamed Adnene Hadj Ayed,
• Mourad Ben Braiek,
• Mahjoub Jabli,
• Noureddine Chaaben,
• Kamel Alimi,
• Stefan Jopp and
• Peter Langer

Beilstein J. Org. Chem. 2021, 17, 1629–1640, doi:10.3762/bjoc.17.115

• properties. Herein, starting from readily available anthranilic acid, an efficient synthesis of 2,4-bis(arylethynyl)-9-chloro-5,6,7,8-tetrahydroacridine derivatives was accomplished via a one-pot double Sonogashira cross-coupling method. The UV-visible absorption and emission properties of the synthesized

A recent overview on the synthesis of 1,4,5-trisubstituted 1,2,3-triazoles

• Pezhman Shiri,
• Ali Mohammad Amani and
• Thomas Mayer-Gall

Beilstein J. Org. Chem. 2021, 17, 1600–1628, doi:10.3762/bjoc.17.114

• aniline (Scheme 5) [40]. A one-pot and multicomponent route to 1,4,5-trisubstituted 1,2,3-triazoles 11 containing a carboxylic ester group on the triazole ring was reported by Zhao et al. This strategy generates desired products from the reaction of readily available primary amines 10, 1,3-dicarbonyl

• the faster hydrolysis of the in situ generated imine intermediates, aromatic aldehydes containing electron-withdrawing substituents afforded no product in the reaction. It was proved that a variety of aliphatic primary amines can efficiently produce the triazole products (Scheme 14) [45]. This one-pot

• enone 46 reacted with aryl and vinyl azides to afford a moderate to high yield of the triazole products (Scheme 16) [46]. A simple one-pot two-stage strategy for the synthesis of disubstituted 4-chloro-, 4-bromo-, and 4-iodo-1,2,3-triazoles 50 from the reaction of the corresponding nonactivated alkynes

Chemical synthesis of C6-tetrazole ᴅ-mannose building blocks and access to a bioisostere of mannuronic acid 1-phosphate

• Eleni Dimitriou and
• Gavin J. Miller

Beilstein J. Org. Chem. 2021, 17, 1527–1532, doi:10.3762/bjoc.17.110

• latter synthetic steps towards 5, an alternative, one-pot three-component procedure (H2N-OH, NaN3 and catalytic [(NH4)4Ce(SO4)4]) was attempted from the crude C6-aldehyde [17]. TLC analysis indicated C6-nitrile formation was evident after 36 h, however, the desired C6-tetrazole 5 was not observed

Synthesis of 1-indolyl-3,5,8-substituted γ-carbolines: one-pot solvent-free protocol and biological evaluation

• Premansh Dudhe,
• Mena Asha Krishnan,
• Kratika Yadav,
• Diptendu Roy,
• Krishnan Venkatasubbaiah,
• Biswarup Pathak and
• Venkatesh Chelvam

Beilstein J. Org. Chem. 2021, 17, 1453–1463, doi:10.3762/bjoc.17.101

•  7), whereas only little uptake was observed at a concentration of 100 nM (Figure S3, Supporting Information File 1). Conclusion In summary, we have developed an operationally simple one-pot synthetic protocol for the synthesis of highly substituted γ-carboline derivatives. The metal- and solvent

Double-headed nucleosides: Synthesis and applications

• Vineet Verma,
• Jyotirmoy Maity,
• Vipin K. Maikhuri,
• Ritika Sharma,
• Himal K. Ganguly and
• Ashok K. Prasad

Beilstein J. Org. Chem. 2021, 17, 1392–1439, doi:10.3762/bjoc.17.98

• one-pot procedure in 55% yield. For this conversion, the carbonyl group at the 4-position of uracil was first activated by tosylation, which was followed by conversion to the amine upon reaction with ammonia and protection of the newly introduced amino group with benzoyl chloride to afford the double

Fritsch–Buttenberg–Wiechell rearrangement of magnesium alkylidene carbenoids leading to the formation of alkynes

• Tsutomu Kimura,
• Koto Sekiguchi,
• Akane Ando and
• Aki Imafuji

Beilstein J. Org. Chem. 2021, 17, 1352–1359, doi:10.3762/bjoc.17.94

• olefination of 4,4'-dimethoxybenzophenone with methoxy(trimethylsilyl)methyl p-tolyl sulfide, and oxidation of the resulting 1-methoxyvinyl p-tolyl sulfide with mCPBA (Scheme 3b) [17]. The 1-chlorovinyl p-tolyl sulfoxides 2e–g were prepared through a one-pot procedure (Scheme 3c) [15]. The HWE reagent was

• generated in situ from chloromethyl p-tolyl sulfoxide, diethyl chlorophosphate, and LDA, and the reaction of the HWE reagent with carbonyl compounds gave sulfoxides 2e–g. The 2,2-disubstituted sulfoxides 2b–d, which could not be prepared by the one-pot HWE reaction, were prepared through a stepwise method

Icilio Guareschi and his amazing “1897 reaction”

• Gian Cesare Tron,
• Alberto Minassi,
• Giovanni Sorba,
• Mara Fausone and
• Giovanni Appendino

Beilstein J. Org. Chem. 2021, 17, 1335–1351, doi:10.3762/bjoc.17.93

• Guareschi” [42]. Triacetonamine bears a certain similarity to tropinone (9), the heterocyclic core of tropane alkaloids, and the one-pot preparation from acetone and ammonia reminds of, and anticipates by two decades, the Robinson synthesis of tropinone and the Willstätter synthesis of the corresponding 2

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

Synthesis of functionalized imidazo[4,5-e]thiazolo[3,2-b]triazines by condensation of imidazo[4,5-e]triazinethiones with DMAD or DEAD and rearrangement to imidazo[4,5-e]thiazolo[2,3-c]triazines

• Alexei N. Izmest’ev,
• Dmitry B. Vinogradov,
• Natalya G. Kolotyrkina,
• Angelina N. Kravchenko and
• Galina A. Gazieva

Beilstein J. Org. Chem. 2021, 17, 1141–1148, doi:10.3762/bjoc.17.87

• ]triazines 3a,b with DMAD or DEAD led always to the formation of compounds 4a,b,h,i along with their isomeric structures 5a,b,h,i, an attempt was made to sequentially obtain and convert the resulting mixtures of compounds 4 and 5 into the individual isomers 5 in a one-pot mode (Scheme 5). The plausible

• imidazo[4,5-e]thiazolo[3,2-b]triazines 4a–n into imidazo[4,5-e]thiazolo[2,3-c]triazines 5a–n. One-pot synthesis of compounds 5a,b,h,i from imidazo[4,5-e]triazines 3a,b. Plausible mechanism of the formation and the rearrangement of compounds 4 into isomers 5. Results for the screening of the reaction

N-tert-Butanesulfinyl imines in the asymmetric synthesis of nitrogen-containing heterocycles

• Joseane A. Mendes,
• Paulo R. R. Costa,
• Miguel Yus,
• Francisco Foubelo and
• Camilla D. Buarque

Beilstein J. Org. Chem. 2021, 17, 1096–1140, doi:10.3762/bjoc.17.86

• reactions, amino diesters 89 being isolated as single diastereoisomers (Scheme 27). Removal of the sulfinyl group under acidic conditions, and further treatment of the resulting ammonium salts with sodium ethoxide, yielded α-methylene-γ-butyrolactams 90, in a one-pot, two-step process [103]. A six-membered

• -tert-butanesulfinyl α-alkoxy aldimines 126 [124]. In this one-pot approach, a successive nucleophilic addition–cyclization–desulfinylation took place, leading directly to piperidinones 127. The reactions were performed in THF at −78 °C for 3 hours. Yields ranged from moderate to excellent with

• co-workers described the diastereoselective synthesis of 1-substituted isoquinolones using one-pot addition–cyclization–deprotection of the imine with Grignard reagents [130]. In this work, the addition to chiral imines 146, 148 and 150 was performed using 2,2’-dipyridyl- or 4-methylmorpholine (NMM

Synthetic accesses to biguanide compounds

• Oleksandr Grytsai,
• Cyril Ronco and
• Rachid Benhida

Beilstein J. Org. Chem. 2021, 17, 1001–1040, doi:10.3762/bjoc.17.82

• electrophilic attack takes place at the more reactive angular position of the aromatic ring, but in case of a substantial steric hindrance, the linear isomer is formed (Scheme 27). Later, this SEAr reactivity was used for the synthesis of pyrroloquinazoline from 5-aminoindole [63]. Contrary to the one-pot

• apparition of side-products and a drop of the yields (Scheme 40). Recently, a one-pot reaction was reported by Yavari and Nematpour that includes the formation of an hexasubstituted biguanide from TMG, and a copper-catalyzed N-arylation [81]. Using TMG and DIC/DCC as reagents, and 10 mol % of CuI

Application of the Meerwein reaction of 1,4-benzoquinone to a metal-free synthesis of benzofuropyridine analogues

• Rashmi Singh,
• Tomas Horsten,
• Rashmi Prakash,
• Swapan Dey and
• Wim Dehaen

Beilstein J. Org. Chem. 2021, 17, 977–982, doi:10.3762/bjoc.17.79

• to hydroquinone 12 with N,N-diethylhydroxylamine (N,N-DEHA) and cyclized via intramolecular nucleophilic aromatic substitution to isolate 6-hydroxybenzofuro[2,3-b]pyridine (13) with 82% yield. Conveniently, the synthesis of 13 was achieved in a one-pot reaction from 11 with no significant differences

Prins cyclization-mediated stereoselective synthesis of tetrahydropyrans and dihydropyrans: an inspection of twenty years

• Asha Budakoti,
• Pradip Kumar Mondal,
• Prachi Verma and
• Jagadish Khamrai

Beilstein J. Org. Chem. 2021, 17, 932–963, doi:10.3762/bjoc.17.77

• allylisilane 152. Further manipulation of functional groups of 153 leads to the synthesis of (−)-dactyloide (Scheme 36) [71]. The one-pot synthesis of a 2,6-disubstituted THP was reported by Minehan and co-workers and involved treating 3-iodo-2-[(trimethylsilyl)methyl]propene with an aldehyde in the presence

• Alder’s chair-like transition state 227 in which the (Z)-alkene accounts for the trans-stereocontrol at the C3 position and equatorial iodide addition accounts for the cis-stereocontrol at the C4 position, as shown below in Scheme 54. The one-pot synthesis of tetrahydropyran by utilizing the Babier–Prins

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

• Shivani Gulati,
• Stephy Elza John and
• Nagula Shankaraiah

Beilstein J. Org. Chem. 2021, 17, 819–865, doi:10.3762/bjoc.17.71

• majority of the atoms of the starting materials. The ability of forming multiple bonds in one-pot via a multicomponent reaction provides a novel and sustainable method in drug discovery [4]. In the recent years, these reactions have emerged as a promising strategy following green chemistry principles such

• provided an easy access to the synthesis of complex bioactive molecules with multiple point diversity incorporating up to eight components in one-pot [8]. The pharmaceutical industry has witnessed a considerable surge in drug synthesis via multicomponent strategies [9][10][11], including the synthesis of

• ]. Therefore, researchers have quested upon generation of pyrans and benzopyrans employing MCR powered by microwave assistance. For instance, Tu and co-workers [55] reported a one-pot two-step tandem procedure subjecting phenylenediamine 23, 2-hydroxynaphthalene-1,4-diones (11), aldehyde 5 with malononitrile

Synthesis of bis(aryloxy)fluoromethanes using a heterodihalocarbene strategy

• Carl Recsei and
• Yaniv Barda

Beilstein J. Org. Chem. 2021, 17, 813–818, doi:10.3762/bjoc.17.70

• reactant ratios, the identity of the base and admixture of potential catalysts such as tetrabutylammonium iodide or DABCO showed no improvement in product ratios. Using superstoichiometric 6 and base with chlorodifluoromethane in a bid to form and react 5 in a one-pot protocol were unsuccessful, even after

[2 + 1] Cycloaddition reactions of fullerene C₆₀ based on diazo compounds

• Yuliya N. Biglova

Beilstein J. Org. Chem. 2021, 17, 630–670, doi:10.3762/bjoc.17.55

• stage, viz, it becomes necessary to preliminarily halogenate the cyclopropanating agent. As a rule, a hardly separable mixture of mono- and dihalo-containing products is formed. The Hirsch-modified Bingel method makes it possible to isolate methanofullerenes by a one-pot reaction using simultaneously

• , Wudl, et al. [96] performed an optimized methanofullerene synthesis by carrying out the cyclopropanation in the one-pot version presented in reference [83]. Therein, fullerene was added directly to the solution of tosylhydrazone in the presence of a base. This procedure makes it possible to generate

Valorisation of plastic waste via metal-catalysed depolymerisation

• Francesca Liguori,
• Carmen Moreno-Marrodán and
• Pierluigi Barbaro

Beilstein J. Org. Chem. 2021, 17, 589–621, doi:10.3762/bjoc.17.53

• ]. The remarkable activity was attributed to the dual effect of base and acid catalysis, in addition to the solubility of the catalyst in EG. It is worth mentioning that, in addition to the recovery of chemicals via chemolytic processes, repurposing techniques of PET were developed based on one-pot, two

• chloride) compounds [243]. One-pot depolymerisation–polycondensation reactions were developed to produce random copolyesters poly(ethylene terephthalate-co-adipate) from PET in the presence of EG and adipic acid [244]. The depolymerisation step was carried out using a zinc acetate catalyst (1 wt %), with

• no need of excess of chemicals. Polymerisation was then achieved by raising the reaction temperature, without purification of the intermediate oligomers being required. An interesting one-pot process was developed that combines the use of bioderived chemicals, isosorbide and succinic acid, with PET