Unveiling the regioselectivity of rhodium(I)-catalyzed [2 + 2 + 2] cycloaddition reactions for open-cage C₇₀ production

• Cristina Castanyer,
• Anna Pla-Quintana,
• Anna Roglans,
• Albert Artigas and
• Miquel Solà

Beilstein J. Org. Chem. 2024, 20, 272–279, doi:10.3762/bjoc.20.28

• 1 readily coordinates with a C70 molecule to generate INT 2, with this step being exergonic by 16.7 kcal·mol−1. From INT 2, the reaction can follow two distinct pathways, culminating in either an α-adduct or a β-adduct. In the α-adduct pathway (black line), a formal [2 + 2] cycloaddition occurs

Perspectives on push–pull chromophores derived from click-type [2 + 2] cycloaddition–retroelectrocyclization reactions of electron-rich alkynes and electron-deficient alkenes

• Michio Yamada

Beilstein J. Org. Chem. 2024, 20, 125–154, doi:10.3762/bjoc.20.13

• reactions. In these reactions, the nucleophilic attack of the alkyne carbon of 1 occurs at the C(1) carbon of 6. When the formal [2 + 2] cycloaddition, as delineated in path A, occurs for the zwitterionic intermediate featuring the 1,1,3-tricyanoallyl anion obtained through the nucleophilic attack

Biphenylene-containing polycyclic conjugated compounds

• Cagatay Dengiz

Beilstein J. Org. Chem. 2023, 19, 1895–1911, doi:10.3762/bjoc.19.141

• -catalyzed formal [2 + 2] cycloaddition reactions but also the emergence of tetracene trimer 86 and tetramer 88 stemming from [2 + 2 + 2] cycloaddition reactions (Scheme 18). It is proposed that an aryne intermediate is formed after thermal activation and that the observed end products are formed from arynes

The unique reactivity of 5,6-unsubstituted 1,4-dihydropyridine in the Huisgen 1,4-diploar cycloaddition and formal [2 + 2] cycloaddition

• Xiu-Yu Chen,
• Hui Zheng,
• Ying Han,
• Jing Sun and
• Chao-Guo Yan

Beilstein J. Org. Chem. 2023, 19, 982–990, doi:10.3762/bjoc.19.73

• -dihydropyridines in acetonitrile at room temperature afforded functionalized isoquinolino[1,2-f][1,6]naphthyridines in good yields and with high diastereoselectivity. More importantly, the formal [2 + 2] cycloaddition reaction of dialkyl acetylenedicarboxylates and 5,6-unsubstituted 1,4-dihydropyridines in

• refluxing acetonitrile gave unique 2-azabicyclo[4.2.0]octa-3,7-dienes as major products and 1,3a,4,6a-tetrahydrocyclopenta[b]pyrroles as minor products via further rearrangement. Keywords: 1,4-dihydropyridine; electron-withdrawing alkyne; formal [2 + 2] cycloaddition; Huisgen's 1,4-dipole; isoquinoline

• acetylenedicarboxylate and 5,6-unsubstituted 1,4-dihydropyridines with N–Ar groups did not give the above isoquinolino[1,2-f][1,6]naphthyridines, but the unique 2-azabicyclo[4.2.0]octa-3,7-diene-7,8-dicarboxylates were isolated in moderate yields. These products were obviously produced from the formal [2 + 2

Unusual highly diastereoselective Rh(II)-catalyzed dimerization of 3-diazo-2-arylidenesuccinimides provides access to a new dibenzazulene scaffold

• Anastasia Vepreva,
• Alexander S. Bunev,
• Andrey Yu. Kudinov,
• Grigory Kantin,
• Mikhail Krasavin and
• Dmitry Dar’in

Beilstein J. Org. Chem. 2022, 18, 533–538, doi:10.3762/bjoc.18.55

• ortho-methyl substituent in the benzylidene fragment. In this case, along with conventional reaction products ‒ dimer 2r and indene 3r, unexpectedly the cyclobutane 5, a product of the formal [2 + 2] cycloaddition, was isolated in low yield (Scheme 1); its structure was confirmed by single-crystal X-ray

Recent developments in enantioselective photocatalysis

• Callum Prentice,
• James Morrisson,
• Andrew D. Smith and
• Eli Zysman-Colman

Beilstein J. Org. Chem. 2020, 16, 2363–2441, doi:10.3762/bjoc.16.197

Reactions of 3-aryl-1-(trifluoromethyl)prop-2-yn-1-iminium salts with 1,3-dienes and styrenes

• Thomas Schneider,
• Michael Keim,
• Bianca Seitz and
• Gerhard Maas

Beilstein J. Org. Chem. 2020, 16, 2064–2072, doi:10.3762/bjoc.16.173

• -Cb for the byproduct. Thus, signals of the two methyl groups (δ 1.63, 1.78 ppm) and two terminal olefinic protons (δ 4.88 ppm, m) are observed, and the ring-CH2 protons appear as an AB spin system (δ 2.75 and 2.92 ppm, 2J = 15.2 Hz). Obviously, 4-Cb and 5-Cb result from a formal [2 + 2] cycloaddition

• = −46.76 ppm, a value quite different from those of products 12 and 13) could finally be isolated in modest yield and was identified by an X-ray structure analysis as the CF3-substituted fulvene 19 (Scheme 7). A reaction pathway leading to fulvene 19 is proposed in Scheme 8. It begins with the formal [2

• + 2] cycloaddition of 1c and the diene component, which is probably a two-step process as shown in Scheme 5. Cyclobutene 20 is prone to a thermally induced conrotatory electrocyclic ring-opening, which yields iminium-substituted triene 21. In a similar reaction, an α-phenyliminium salt structurally

NHC-catalyzed enantioselective synthesis of β-trifluoromethyl-β-hydroxyamides

• Alyn T. Davies,
• Mark D. Greenhalgh,
• Alexandra M. Z. Slawin and
• Andrew D. Smith

Beilstein J. Org. Chem. 2020, 16, 1572–1578, doi:10.3762/bjoc.16.129

• Alyn T. Davies Mark D. Greenhalgh Alexandra M. Z. Slawin Andrew D. Smith EaStCHEM, School of Chemistry, University of St Andrews, North Haugh, St Andrews, Fife KY16 9ST, United Kingdom 10.3762/bjoc.16.129 Abstract The N-heterocyclic carbene (NHC)-catalyzed formal [2 + 2] cycloaddition between α

• moderate to good yield as a single diastereoisomer. Keywords: enantioselective catalysis; formal [2 + 2] cycloaddition; N-heterocyclic carbene; ring opening; trifluoromethyl group; Introduction The trifluoromethyl unit holds a prominent and privileged position within organic chemistry [1][2][3][4][5][6

• paper, this formal [2 + 2] protocol is extended to the use of trifluoroacetophenones to develop an enantioselective route to β-trifluoromethyl-β-hydroxy carboxylic acid derivatives (Figure 2C). Results and Discussion Optimization Optimization of the NHC-catalyzed formal [2 + 2] cycloaddition using the α

Recent synthesis of thietanes

• Jiaxi Xu

Beilstein J. Org. Chem. 2020, 16, 1357–1410, doi:10.3762/bjoc.16.116

(Thio)urea-mediated synthesis of functionalized six-membered rings with multiple chiral centers

• Giorgos Koutoulogenis,
• Nikolaos Kaplaneris and
• Christoforos G. Kokotos

Beilstein J. Org. Chem. 2016, 12, 462–495, doi:10.3762/bjoc.12.48

• this reaction is that it can be transferred to large-scale chemical production, due to the difference in the solubilities of the reactants and the products, which means the product and the catalyst can be isolated separately. In 2012, Carrillo and co-workers reported an enantioselective formal [2 + 2

• ] cycloaddition of enals 237 with nitroalkenes 238 to obtain the oxabicyclo product 239 (Scheme 74) [93]. A combination of catalysts was used, with catalysts 23 and 214. This reaction affords the desired product in 38–91% yield and 85–95% ee. Furthermore, a thiourea catalyzed reaction via a cationic

Polar reactions of acyclic conjugated bisallenes

• Reiner Stamm and
• Henning Hopf

Beilstein J. Org. Chem. 2013, 9, 36–48, doi:10.3762/bjoc.9.5

• conjugated dihalodienes and trienes. Finally, the reaction of 2 with chlorosulfonyl isocyanate provides a β-lactam derivative formed in a formal [2 + 2] cycloaddition via a zwitterionic intermediate. Taken together, these studies show that conjugated bisallenes [39], which are readily available by high

Metal–ligand multiple bonds as frustrated Lewis pairs for C–H functionalization

• Matthew T. Whited

Beilstein J. Org. Chem. 2012, 8, 1554–1563, doi:10.3762/bjoc.8.177

• silylenes [54][55], insertion of olefins into hydrosilylenes [56], and bimolecular redistribution of thiolates between ruthenium silyl and silylene complexes [57]. Reactivity that involves metal-ligand cooperation (in the sense described in this article) has been reported in the formal [2 + 2] cycloaddition

• ) imide [42]. Formal [2 + 2] cycloaddition of methyl isocyanate at a ruthenium silylene [58]. Oxygen-atom transfer from phenyl isocyanate to a cationic terminal borylene [60]. Coupling of a phosphorus ylide with an iridium methylene [62]. Reactions of (PNP)Ir═C(H)Ot-Bu with oxygen-containing

Alkoxide-induced ring opening of bicyclic 2-vinylcyclobutanones: A convenient synthesis of 2-vinyl-substituted 3-cycloalkene-1-carboxylic acid esters

• Xiufang Ji,
• Zhiming Li,
• Quanrui Wang and
• Andreas Goeke

Beilstein J. Org. Chem. 2012, 8, 650–657, doi:10.3762/bjoc.8.72

• ring opening of 7-methyl-7-vinylbicyclo[3.2.0]hept-2-en-6-one to a linear polyene ketone. Synthesis of vinyl or phenyl substituted cyclobutanones 4a–i. Ring opening of cyclobutanones 4 to afford products 5 or 6. Reaction of 4a with LDA. Plausible mechanism for ring opening of 4a. Formal [2 + 2

• ] cycloaddition of vinylketenes 2 with olefins.a Cleavage reaction of 4a with metal alkoxide.a Reaction of 4 with MeONa or t-BuOK.a Supporting Information Supporting Information File 61: Detailed experimental procedures. Supporting Information File 62: NMR spectral data for unknown compounds.

Amines as key building blocks in Pd-assisted multicomponent processes

• Didier Bouyssi,
• Nuno Monteiro and
• Geneviève Balme

Beilstein J. Org. Chem. 2011, 7, 1387–1406, doi:10.3762/bjoc.7.163

• elimination. This münchnone is in equilibrium with its ketene isomeric form 6, and a formal [2 + 2] cycloaddition with a second equivalent of imine generates the lactam (Scheme 3). The authors pointed out that the trapping of HCl by a sterically hindered base (NEtiPr2) is the key point in this methodology to