Exfoliation of titanium nitride using a non-thermal plasma process

• Priscila Jussiane Zambiazi,
• Dolores Ribeiro Ricci Lazar,
• Larissa Otubo,
• Rodrigo Fernando Brambilla de Souza,
• Almir Oliveira Neto and
• Cecilia Chaves Guedes-Silva

Beilstein J. Nanotechnol. 2024, 15, 631–637, doi:10.3762/bjnano.15.53

• conductivity [10][11][12]. On the nanoscale, TiN finds applications as additive in titanium alloys, as catalyst support material, as supercapacitor component, and as nanocoating for medical implants [13][14][15][16]. Furthermore, ultra-small TiN nanodots have been successfully obtained through liquid

Batch preparation of nanofibers containing nanoparticles by an electrospinning device with multiple air inlets

• Dong Wei,
• Chengwei Ye,
• Adnan Ahmed and
• Lan Xu

Beilstein J. Nanotechnol. 2023, 14, 141–150, doi:10.3762/bjnano.14.15

• conductivity, stable physical and chemical properties, as well as fast charge and discharge, the application of electrospun nanofiber-based materials in supercapacitor electrode materials has attracted great attention [1][2]. Although traditional single-needle electrospinning (SNE) devices are widely used and

ZnO and MXenes as electrode materials for supercapacitor devices

• Ameen Uddin Ammar,
• Ipek Deniz Yildirim,
• Feray Bakan and
• Emre Erdem

Beilstein J. Nanotechnol. 2021, 12, 49–57, doi:10.3762/bjnano.12.4

• Supercapacitor devices are interesting owing to their broad range of applicability from wearable electronics to energy storage in electric vehicles. One of the key parameters that affect the efficiency of supercapacitor devices is selecting the ideal electrode material for a specific application. Regarding this

• , recently developed metal oxides, specifically nanostructured ZnO, and MXenes with their defect structures, size effects, as well as optical and electronic properties have been presented as electrode material in supercapacitor devices. The discussion of MXenes along with ZnO, although different in chemistry

• materials provide a fundamental understanding regarding the manner in which 2D structures are impacted by defects compared to bulk. Such an approach would therefore serve the scientific community with the material design tools needed to fabricate the next generation of supercapacitor devices. Keywords: 2D

Free and partially encapsulated manganese ferrite nanoparticles in multiwall carbon nanotubes

• Saja Al-Khabouri,
• Salim Al-Harthi,
• Toru Maekawa,
• Mohamed E. Elzain,
• Ashraf Al-Hinai,
• Ahmed D. Al-Rawas,
• Abbsher M. Gismelseed,
• Ali A. Yousif and
• Myo Tay Zar Myint

Beilstein J. Nanotechnol. 2020, 11, 1891–1904, doi:10.3762/bjnano.11.170

• removal of harmful pollutants [8], carbon nanotubes decorated with molybdenum disulfide are used in microbial fuel cells [9] and photoelectric detectors [10], supercapacitor electrodes use binary metal oxide/multiwall carbon nanotubes (MWCNTs) [11], among other numerous recently developed applications [12

Structure and electrochemical performance of electrospun-ordered porous carbon/graphene composite nanofibers

• Yi Wang,
• Yanhua Song,
• Chengwei Ye and
• Lan Xu

Beilstein J. Nanotechnol. 2020, 11, 1280–1290, doi:10.3762/bjnano.11.112

• configurations were used as a material to fabricate supercapacitor electrodes. These nanofibers were synthesized by applying a modified parallel electrode to the electrospinning method (MPEM) in order to generate electrospun polyacrylonitrile (PAN) nanofibers containing graphene. After synthesis, these fibers

• ; electrochemistry; electrode material; electrospinning method; ordered and porous nanofibers; supercapacitor; Introduction As the technology sector develops, societal demands for energy storage devices also increases. Supercapacitors, including electric double-layer capacitors (EDLCs) and pseudo-capacitance

• improvement of the current supercapacitor electrochemical performance, the capacitance and cycle stability of supercapacitors are still subjects of research interest. Electrospinning is one of the most convenient methods to synthesize nanofibers in a continuous manner. Electrospinning has many advantages over

Exfoliation in a low boiling point solvent and electrochemical applications of MoO₃

• Matangi Sricharan,
• Bikesh Gupta,
• Sreejesh Moolayadukkam and
• H. S. S. Ramakrishna Matte

Beilstein J. Nanotechnol. 2020, 11, 662–670, doi:10.3762/bjnano.11.52

• was not altered after exposure to sunlight (UV radiation) for 24 h. The exfoliated MoO3 was used as electrode material for supercapacitor applications. The specific capacitance values were as high as 221 F·g−1 at 5 mV·s−1 with good rate capability and capacitance retention in a three-electrode system

• saturates at 5 wt % CB. This observation also supports the observation from voltammetry data where the composite with 5 wt % CB shows a better performance. Typically, electrode materials are tested for supercapacitor applications in a three-electrode configuration. But for practical applications, it is

• appropriate to test them in a two-electrode configuration. The optimized material from the three-electrode system (MoO3/5 wt % CB composite) was chosen for fabricating a two-electrode supercapacitor device (Figure 4). The CV curve of the capacitor at a scan rate of 5 mV·s−1 is shown in Figure 4a in a

High-performance asymmetric supercapacitor made of NiMoO₄ nanorods@Co₃O₄ on a cellulose-based carbon aerogel

• Meixia Wang,
• Jing Zhang,
• Xibin Yi,
• Benxue Liu,
• Xinfu Zhao and
• Xiaochan Liu

Beilstein J. Nanotechnol. 2020, 11, 240–251, doi:10.3762/bjnano.11.18

• porous structure, the NiMoO4@Co3O4/CA ternary composite yields electrodes with an enhanced specific capacitance of 436.9 C/g at a current density of 0.5 A/g and an excellent rate capability of 70.7% capacitance retention at 5.0 A/g. Moreover, an advanced asymmetric supercapacitor (ASC) is assembled using

• porous structure; nanoporous material; NiMoO4; supercapacitor; Introduction In recent years, in the light of environmental degradation and an increasing energy demand, the development of various new, renewable and clean energy conversion and storage devices has attracted wide attention [1][2][3][4

• on the above considerations, we present a simple scalable strategy to fabricate an integrated NiMoO4@Co3O4 hierarchical porous structure aligned on CA, which is derived from a cellulose precursor, to be applied in an advanced asymmetric supercapacitor (ASC). The NiMoO4 nanorods originated from ZIF-67

Simple synthesis of nanosheets of rGO and nitrogenated rGO

• Pallellappa Chithaiah,
• Madhan Mohan Raju,
• Giridhar U. Kulkarni and
• C. N. R. Rao

Beilstein J. Nanotechnol. 2020, 11, 68–75, doi:10.3762/bjnano.11.7

• nitrogen content (20–25 atom %). To further improve the properties of the synthesized rGO sheets, hydrogen treatment has been carried out to reduce the oxygen functional groups. Cyclic voltammograms and charge–discharge experiments have been carried out to understand the supercapacitor behavior of rGO and

• and 600 °C as well. The corresponding XRD patterns, Raman spectra and SEM images are given in Figure S1 and Figure S2, respectively, in Supporting Information File 1. In order to understand the supercapacitor behavior of rGO and H-rGO (hydrogen-treated rGO) samples, we have carried out cyclic

• capacitance and carried out charge–discharge experiments. The rGO nanosheets that were hydrogen-treated (H-rGO) showed good supercapacitor behavior. Experimental Preparation of rGO and N-rGO nanosheets Sucrose in the form of granulated table sugar from a retail store and analytical grade glycine from Sigma

Ultrathin Ni_1−xCo_xS₂ nanoflakes as high energy density electrode materials for asymmetric supercapacitors

• Xiaoxiang Wang,
• Teng Wang,
• Rusen Zhou,
• Lijuan Fan,
• Shengli Zhang,
• Feng Yu,
• Tuquabo Tesfamichael,
• Liwei Su and
• Hongxia Wang

Beilstein J. Nanotechnol. 2019, 10, 2207–2216, doi:10.3762/bjnano.10.213

• exhibited a maximum specific capacity of 1066.8 F·g−1 (533.4 C·g−1) at 0.5 A·g−1 and a capacity retention of 63.4% at 20 A·g−1 in an asymmetric supercapacitor (ASC). The ASC showed a superior energy density of 100.5 Wh·kg−1 (at a power density of 1.5 kW·kg−1), an ultrahigh power density of 30 kW·kg−1 (at an

• higher conductivity of the sulfide material [39]. Another critical parameter of supercapacitor electrodes is cycling stability. It can be seen from Figure 3d that the capacity increased in the first 50 cycles, which can be due to the wetting process of the electrode in the electrolyte [40]. After a total

• evaluate energy density and power density of the Ni1−xCoxS2 material for practical applications, the as-prepared Ni1−xCoxS2/NF as a positive electrode and the commercial YP-50F activated carbon (AC/NF) as a negative electrode (Figure 4a) were assembled to an asymmetric supercapacitor. As shown in

Facile synthesis of carbon nanotube-supported NiO//Fe₂O₃ for all-solid-state supercapacitors

• Shengming Zhang,
• Xuhui Wang,
• Yan Li,
• Xuemei Mu,
• Yaxiong Zhang,
• Jingwei Du,
• Guo Liu,
• Xiaohui Hua,
• Yingzhuo Sheng,
• Erqing Xie and
• Zhenxing Zhang

Beilstein J. Nanotechnol. 2019, 10, 1923–1932, doi:10.3762/bjnano.10.188

• mAh·g−1 at 2 A·g−1 with a capacitance retention of 40% at 40 A·g−1. The obtained CC-CNT@NiO cathode exhibits a high capacity of 527 mAh·g−1 at 2 A·g−1 and an excellent rate capability with a capacitance retention of 78% even at 40 A·g−1. The all-solid-state asymmetric supercapacitor fabricated with

• cathode were prepared. CNTs significantly improved the conductivity and enhanced the capacity of Fe2O3 up to 226 mAh·g−1 at 2 A·g−1, and capacity of NiO to 527 mAh·g−1 at 2 A·g−1. Furthermore, by assembling the two electrodes, an asymmetric supercapacitor (ASC) with a high energy density of 63.3 Wh·kg−1

• Discussion Figure 1 shows the process of synthesizing cathode and anode, and finally, the asymmetric supercapacitor. The details can be seen in the Experimental section. Anode material CC-CNT@Fe2O3 CNTs were grown on CC by chemical vapour deposition (CVD). As shown in Figure 2a, CNTs grow homogeneously with

High-tolerance crystalline hydrogels formed from self-assembling cyclic dipeptide

• Yongcai You,
• Ruirui Xing,
• Qianli Zou,
• Feng Shi and
• Xuehai Yan

Beilstein J. Nanotechnol. 2019, 10, 1894–1901, doi:10.3762/bjnano.10.184

• (ALG), hyaluronic acid (HA)), extreme acid/base environments, and thermal conditions. Owing to the robustness of the hydrogel, the material also showed excellent performance as an electrochemical supercapacitor. Hence, self-assembled CDP hydrogels are promising for applications in complex and harsh

• various conditions, such as acidic or basic environments, or in the presence of charged biopolymers. Given its excellent electrochemical stability, the highly stable hydrogel was successfully demonstrated as an electrochemical supercapacitor. This study demonstrates that hydrogels based on self-assembly

Upcycling of polyurethane waste by mechanochemistry: synthesis of N-doped porous carbon materials for supercapacitor applications

• Christina Schneidermann,
• Pascal Otto,
• Desirée Leistenschneider,
• Sven Grätz,
• Claudia Eßbach and
• Lars Borchardt

Beilstein J. Nanotechnol. 2019, 10, 1618–1627, doi:10.3762/bjnano.10.157

• materials that were applied in supercapacitor electrodes. In detail, a mechanochemical solvent-free one-pot synthesis is used and combined with a thermal treatment. Polyurethane is an ideal precursor already containing nitrogen in its backbone, yielding nitrogen-doped porous carbon materials with N content

• EMIM-BF4 (70 F·g−1). Keywords: mechanochemistry; polyurethane; porous carbon; supercapacitor; waste; Introduction Currently more than 275 million tons of plastics end up as waste every year, 12.7 million tons of which accumulate in the oceans [1][2]. This waste is mainly packaging materials such as

• conductivities is also shown in the Nyquist plot (Figure 4C). A higher nitrogen content reduces the electric conductivity of the electrodes and thus, does not have a beneficial influence on the supercapacitor performance. Conclusion We introduced an upcycling process for plastic waste to produce N-doped carbon

Materials nanoarchitectonics at two-dimensional liquid interfaces

• Katsuhiko Ariga,
• Michio Matsumoto,
• Taizo Mori and
• Lok Kumar Shrestha

Beilstein J. Nanotechnol. 2019, 10, 1559–1587, doi:10.3762/bjnano.10.153

Flexible freestanding MoS₂-based composite paper for energy conversion and storage

• Florian Zoller,
• Jan Luxa,
• Thomas Bein,
• Dina Fattakhova-Rohlfing,
• Daniel Bouša and
• Zdeněk Sofer

Beilstein J. Nanotechnol. 2019, 10, 1488–1496, doi:10.3762/bjnano.10.147

• high flexibility and combines the high conductivity of SWCNTs and electrochemical potential of MoS2. We also show that the material finds use as an anode in LIBs, supercapacitor electrodes and HER catalyst. The application for LIBs seems particularly promising as this composite material requires no

An efficient electrode material for high performance solid-state hybrid supercapacitors based on a Cu/CuO/porous carbon nanofiber/TiO₂ hybrid composite

• Mamta Sham Lal,
• Thirugnanam Lavanya and
• Sundara Ramaprabhu

Beilstein J. Nanotechnol. 2019, 10, 781–793, doi:10.3762/bjnano.10.78

• electrode in a three-electrode configuration. The solid-state hybrid supercapacitor (SSHSC) fabricated based on this composite exhibits a high specific capacitance value of 330 F g−1 at a current density of 1 A g−1 with 78.8% capacitance retention for up to 10,000 cycles. At the same time, a high energy

• nanoparticles, which together open up new opportunities for energy storage and conversion applications. Keywords: composite; electrochemical performance; porous carbon nanofiber; solid-state hybrid supercapacitor; supercapacitor; TiO2 nanoparticles; Introduction To meet the rapidly growing demand for energy

• proportional with the pore size of the active electrode materials [14]. The synthesis of carbon materials with very high surface area and appropriate pore size suitable for supercapacitor electrodes is a major challenge. It has been shown that this could be achieved by addition of sacrificial polymers, which

Widening of the electroactivity potential range by composite formation – capacitive properties of TiO₂/BiVO₄/PEDOT:PSS electrodes in contact with an aqueous electrolyte

• Konrad Trzciński,
• Mariusz Szkoda,
• Andrzej P. Nowak,
• Marcin Łapiński and
• Anna Lisowska-Oleksiak

Beilstein J. Nanotechnol. 2019, 10, 483–493, doi:10.3762/bjnano.10.49

• π-conjugated polymer chains [70]. TiO2 in a form of nanotubes have been already tested as electrodes for supercapacitor working in a contact with an aqueous electrolyte. Pristine nanotubes exhibited capacitance equal to about 0.9 mF·cm−2 [71]. Commonly used hydrogenation procedure leads to the

A Ni(OH)₂ nanopetals network for high-performance supercapacitors synthesized by immersing Ni nanofoam in water

• Donghui Zheng,
• Man Li,
• Yongyan Li,
• Chunling Qin,
• Yichao Wang and
• Zhifeng Wang

Beilstein J. Nanotechnol. 2019, 10, 281–293, doi:10.3762/bjnano.10.27

• Developing a facile and environmentally friendly approach to the synthesis of nanostructured Ni(OH)2 electrodes for high-performance supercapacitor applications is a great challenge. In this work, we report an extremely simple route to prepare a Ni(OH)2 nanopetals network by immersing Ni nanofoam in water. A

• supercapacitor (SC) devices were assembled using ribbons immersed for seven days and showed a maximum volumetric energy density of ca. 32.7 mWh/cm3 at a power density of 0.8 W/cm3, and of 13.7 mWh/cm3 when the power density was increased to 2 W/cm3. The fully charged SC devices could light up a red LED. The work

• provides a new idea for the synthesis of nanostructured Ni(OH)2 by a simple approach and ultra-low cost, which largely extends the prospect of commercial application in flexible or wearable devices. Keywords: dealloying; Ni nanofoam; Ni(OH)2 nanopetals; metallic glass; supercapacitor; Introduction

One-step chemical vapor deposition synthesis and supercapacitor performance of nitrogen-doped porous carbon–carbon nanotube hybrids

• Egor V. Lobiak,
• Lyubov G. Bulusheva,
• Ekaterina O. Fedorovskaya,
• Yury V. Shubin,
• Pavel E. Plyusnin,
• Pierre Lonchambon,
• Boris V. Senkovskiy,
• Zinfer R. Ismagilov,
• Emmanuel Flahaut and
• Alexander V. Okotrub

Beilstein J. Nanotechnol. 2017, 8, 2669–2679, doi:10.3762/bjnano.8.267

• reduces the resistance at the carbon surface/electrolyte interface and the nanotubes permeating the porous carbon provide fast charge transport in the cell. Keywords: bimetallic catalyst; electrochemical impedance spectroscopy; N-doped carbon; porous carbon–carbon nanotube hybrid; supercapacitor

• regions of graphitic material [45]. Supercapacitor performance The CV curves of CNx materials recorded at a scan rate of 20 mV s−1 are compared in Figure 7a. The curves have a near rectangular shape, indicating a good capacitive behavior of the materials. The peaks and humps on the curves correspond to

• spectroscopy The kinetics of the charge–discharge processes of the electrodes was investigated using EIS measurements. The impedance diagrams represented as Nyquist plots are shown in Figure 8. The Nyquist plot of an ideal supercapacitor is presented by a semicircle with a vertical line at low frequencies. The

Oxidative stabilization of polyacrylonitrile nanofibers and carbon nanofibers containing graphene oxide (GO): a spectroscopic and electrochemical study

• İlknur Gergin,
• Ezgi Ismar and
• A. Sezai Sarac

Beilstein J. Nanotechnol. 2017, 8, 1616–1628, doi:10.3762/bjnano.8.161

• mechanical properties and a potential for a variety of applications; such as supercapacitor applications, battery applications, and catalyst support materials. Polyacrylonitrile (PAN) is one of the well-known precursor for obtaining carbon nanofibers that have a diameter ranging between nanometers and

• groups have the same effect. For enhancing the capacitance of a supercapacitor, an active electrode material with oxygen functional groups is necessary [24]. Furthermore, the PAN cyclization temperature can be decreased in the presence of graphene oxide. The functional groups of graphene oxide initiate

First examples of organosilica-based ionogels: synthesis and electrochemical behavior

• Andreas Taubert,
• Ruben Löbbicke,
• Barbara Kirchner and
• Fabrice Leroux

Beilstein J. Nanotechnol. 2017, 8, 736–751, doi:10.3762/bjnano.8.77

• supercapacitor has a capacitance up to 90 F/g at room temperature [26]. Ameri et al. made IG transistors using graphene [27] for low voltage operation. Using a slightly different approach, Hesemann and coworkers and Néouze and coworkers incorporated IL-like functionalities into periodic mesoporous organosilicas

Synthesis of graphene–transition metal oxide hybrid nanoparticles and their application in various fields

• Arpita Jana,
• Elke Scheer and
• Sebastian Polarz

Beilstein J. Nanotechnol. 2017, 8, 688–714, doi:10.3762/bjnano.8.74

• surface area of graphene help to maintain the mechanical strength of the hybrid during the Li insertion and extraction process. Graphene is used as a supercapacitor because of its unique properties, such as high surface area, excellent flexibility, chemical inertness and good electrical conductivity [28

• abundance of Mn in nature. Among all the oxides of manganese, Mn3O4 has been studied widely as an anode material for LIB to achieve higher specific capacities than graphite [120]. Mn3O4 has a spinal structure and is a potentially interesting electrode material as an electrolytic supercapacitor because of

• ]. Ultrathin 2D MnO2 graphene hybrids form high-performance flexible planar supercapacitors [140]. Graphene-wrapped MnO2 is also used for supercapacitor applications [141]. MnO has low conversion potential, low voltage hysteresis (<0.8 V), and high density (5.43 g·cm−3). The application of MnO in LIB is a

Fundamental properties of high-quality carbon nanofoam: from low to high density

• Natalie Frese,
• Shelby Taylor Mitchell,
• Christof Neumann,
• Amanda Bowers,
• Armin Gölzhäuser and
• Klaus Sattler

Beilstein J. Nanotechnol. 2016, 7, 2065–2073, doi:10.3762/bjnano.7.197

• various chemical elements have been investigated. In particular, foams from transition metals and noble metals have attracted attention, and interesting applications have been developed. Nickel nanofoam has been used for glucose sensing [1] and also been suggested for high-performance supercapacitor

Synthesis and applications of carbon nanomaterials for energy generation and storage

• Marco Notarianni,
• Jinzhang Liu,
• Kristy Vernon and
• Nunzio Motta

Beilstein J. Nanotechnol. 2016, 7, 149–196, doi:10.3762/bjnano.7.17

Surfactant-controlled composition and crystal structure of manganese(II) sulfide nanocrystals prepared by solvothermal synthesis

• Elena Capetti,
• Anna M. Ferretti,
• Vladimiro Dal Santo and
• Alessandro Ponti

Beilstein J. Nanotechnol. 2015, 6, 2319–2329, doi:10.3762/bjnano.6.238

• ), ≈100 K (β-MnS), and 154 K (α-MnS) [6]. The interesting physical properties and the rich polymorphism prompted research on MnS nanocrystals (NCs) in view of applications as photoluminescent components [7], photoreduction catalysts [8], anode materials in lithium-ion batteries [9], and supercapacitor

Carbon nano-onions (multi-layer fullerenes): chemistry and applications

• Juergen Bartelmess and
• Silvia Giordani

Beilstein J. Nanotechnol. 2014, 5, 1980–1998, doi:10.3762/bjnano.5.207

• materials in supercapacitor electrodes. Bushueva et al. for example, found capacitance values of the investigated CNO material of 20–40 F·g−1 and 70–100 F·g−1 with acidic or basic electrolyte solutions, respectively [56]. In 2010, Pech et al. published the preparation and characterization of ultrahigh-power

• micrometer-sized supercapacitors based on CNOs [57]. In an extensive electrochemical study in different aqueous and organic electrolytes, McDonough et al. investigated the influence of the CNO structure on their electrochemical performance in supercapacitor electrodes [58]. The increase of the capacitance of

• supercapacitor electrodes [46]. Also the CNO/PEDOT:PSS composites, which were previously discussed, showed promising properties for the application as electrode material in supercapacitors, such as a specific capacity of 96 F·g−1, good cation-exchange properties and a simple synthesis [47]. In a recent study