Nanoporous smartPearls for dermal application – Identification of optimal silica types and a scalable production process as prerequisites for marketed products

• David Hespeler,
• Sanaa El Nomeiri,
• Jonas Kaltenbach and
• Rainer H. Müller

Beilstein J. Nanotechnol. 2019, 10, 1666–1678, doi:10.3762/bjnano.10.162

• parameters (e.g., particle size, pore diameter, pore volume) in order to identify particles which are most easy to process. Materials and Methods Materials Rutin with a purity of 95% was purchased from Denk Ingredients (Munich, Germany). Various mesoporous silica particles (Table 1) with pore diameter of 3

Highly ordered mesoporous silica film nanocomposites containing gold nanoparticles for the catalytic reduction of 4-nitrophenol

• Mohamad Azani Jalani,
• Leny Yuliati,
• Siew Ling Lee and
• Hendrik O. Lintang

Beilstein J. Nanotechnol. 2019, 10, 1368–1379, doi:10.3762/bjnano.10.135

• synthesis method using discotic trinuclear gold(I) pyrazolate complex, were successfully utilized for the fabrication of thin film mesoporous silica nanocomposites containing gold nanoparticles. The material exhibited a highly ordered hexagonal structure when subjected to a thermal hydrogen reduction

• . Such catalytic activity is due to the presence of gold nanoparticles of smaller size in the silicate channels of the highly ordered mesoporous film nanocomposites. Keywords: catalyst; gold nanoparticle; mesoporous silica; nanocomposite; thermal hydrogen reduction; 4-nitrophenol reduction

• ; Introduction Mesoporous silica nanomaterials with pore size between 2 to 50 nm [1] have been recently applied to the development of biomedical adsorbents [2][3][4], drug delivery systems [5][6][7], catalysts [8][9][10], as well as supports for metal nanoparticles [11][12][13] due to their large surface area

Photoactive nanoarchitectures based on clays incorporating TiO₂ and ZnO nanoparticles

• Eduardo Ruiz-Hitzky,
• Pilar Aranda,
• Marwa Akkari,
• Nithima Khaorapapong and
• Makoto Ogawa

Beilstein J. Nanotechnol. 2019, 10, 1140–1156, doi:10.3762/bjnano.10.114

• inorganic crystalline hosts [60][61][62][63][64][65][66]. Nanoarchitectures composed of zeolites and mesoporous silica and TiO2 or ZnO NPs have been reported as efficient photocatalysts as well as photoluminescent materials [67][68][69]. The formation of TiO2 and ZnO NPs on the external surface, in addition

• to the NPs confined in the nanopores, is still an important challenge. Recently, the size-controlled synthesis of TiO2 NPs within mesoporous silica (SBA-15) has been reported, where, according to Vibulyaseak and co-workers [70], the NPs formation occurred exclusively in the mesopores. The aim of this

Polydopamine-coated Au nanorods for targeted fluorescent cell imaging and photothermal therapy

• Boris N. Khlebtsov,
• Andrey M. Burov,
• Timofey E. Pylaev and
• Nikolai G. Khlebtsov

Beilstein J. Nanotechnol. 2019, 10, 794–803, doi:10.3762/bjnano.10.79

• tunable shell thickness. The most popular coatings such as mesoporous silica, PEG and polyelectrolyte shells do not meet the above quality criteria. In 2007 Messersmith et al. reported the mussel-inspired adhesive polydopamine (PDA) multifunctional coating for various materials including nanoparticles [25

• obtain a loading efficiency of 103 R123 molecules per one composite AuNRs-PDA-R123-folate particle. This number is comparable with the typical estimations of the loading capacity for AuNRs coated with a mesoporous silica shell [45] (several thousands of dye molecules per particle). In our case, a smaller

• two cuvettes retain their dark color. It is notable that contrary to the usual physical loading of molecular content into mesoporous silica, the nanocomposites with PDA shell obtained by chemisorption remain stable without dye release during several washing steps and long-term storage. For theranostic

Thermal control of the defunctionalization of supported Au₂₅(glutathione)₁₈ catalysts for benzyl alcohol oxidation

• Zahraa Shahin,
• Hyewon Ji,
• Rodica Chiriac,
• Nadine Essayem,
• Franck Rataboul and
• Aude Demessence

Beilstein J. Nanotechnol. 2019, 10, 228–237, doi:10.3762/bjnano.10.21

• toluene at 80 °C with a base and under atmospheric conditions [21]. Using O2 as an oxidant under atmospheric conditions is a limitless and inexpensive oxidizing agent and allows for a sustainable transformation. Nevertheless, in the last example, the mesoporous silica support exhibits low stability in

Targeting strategies for improving the efficacy of nanomedicine in oncology

• Gonzalo Villaverde and
• Alejandro Baeza

Beilstein J. Nanotechnol. 2019, 10, 168–181, doi:10.3762/bjnano.10.16

• there [15]. These nanocapsules were anchored on the surface of mesoporous silica nanoparticles (MSN) coated with a lipid bilayer (protocells) enhancing their penetration into 3D tumoral tissue models, which yielded a significant enhancement of the therapeutic efficacy of these nanodevices (Figure 1) [16

pH-mediated control over the mesostructure of ordered mesoporous materials templated by polyion complex micelles

• Emilie Molina,
• Mélody Mathonnat,
• Jason Richard,
• Patrick Lacroix-Desmazes,
• Martin In,
• Philippe Dieudonné,
• Thomas Cacciaguerra,
• Corine Gérardin and
• Nathalie Marcotte

Beilstein J. Nanotechnol. 2019, 10, 144–156, doi:10.3762/bjnano.10.14

• Coulomb, UMR 5221 CNRS – Université de Montpellier, 34095 Montpellier, France 10.3762/bjnano.10.14 Abstract Ordered mesoporous silica materials were prepared under different pH conditions by using a silicon alkoxide as a silica source and polyion complex (PIC) micelles as the structure-directing agents

• production of ordered mesoporous silica materials [17][18]. Alternatively, the hydrolysis and condensation steps of the more popular silicon alkoxide precursors can be separated following a two-step approach in which the hydrolysis of the alkoxysilane is first performed in acidic medium and the silica

• , we have been developing an original route for the synthesis of ordered mesoporous materials based on the use of non-conventional structure-directing agents. Ordered mesoporous silica and organosilica materials were prepared under mild acidic conditions by using polyion complex (PIC) micelles as

Enhanced antineoplastic/therapeutic efficacy using 5-fluorouracil-loaded calcium phosphate nanoparticles

• Shanid Mohiyuddin,
• Saba Naqvi and
• Gopinath Packirisamy

Beilstein J. Nanotechnol. 2018, 9, 2499–2515, doi:10.3762/bjnano.9.233

• both in vitro and in vivo studies [5]. Gold nanoparticles conjugated with a trans-activating transcriptional activator (TAT) peptide modification encapsulated with the drug doxorubicin showed enhanced toxicity in brain cancer models [6]. Further, mesoporous silica nanoparticles were successfully used

• the bulk. Thus metal-based NPs applied to biomedical applications could contradict the success of disease prognosis and treatment. Upon synthesis via solvent-extraction or calcination procedures, mesoporous silica nanoparticles (MSNs) were found to inhibit cellular respiration [10] in the in vivo

Block copolymers for designing nanostructured porous coatings

• Roberto Nisticò

Beilstein J. Nanotechnol. 2018, 9, 2332–2344, doi:10.3762/bjnano.9.218

• ) parts linked together by chemical bonds [101]. Analogous to surfactants, even amphiphilic block copolymers (such as the PS-b-PEO ones) can be used as templating agents [4]. As reported by Yu and co-workers [102], PS-b-PEO copolymers were used for the production of mesoporous silica films where a cubic

• close-packed spherical system was obtained by solvent evaporation induced self-assembly (EISA) process. Different pore sizes can be obtained by changing the block length in the soft templates. By coupling the spin-coating deposition technique with the soft-templating approach, mesoporous silica coatings

SO₂ gas adsorption on carbon nanomaterials: a comparative study

• Deepu J. Babu,
• Divya Puthusseri,
• Frank G. Kühl,
• Sherif Okeil,
• Michael Bruns,
• Manfred Hampe and
• Jörg J. Schneider

Beilstein J. Nanotechnol. 2018, 9, 1782–1792, doi:10.3762/bjnano.9.169

• , e.g., for flue gas scrubbing applications. These include, but are not limited to, various zeolites [3][4], metal-organic frameworks [5][6][7][8], mesoporous silica [9][10][11] and carbon nanomaterials [12][13][14][15]. Due to its higher stability against moisture and corrosive gases (typical flue gas

Cyclodextrin-assisted synthesis of tailored mesoporous silica nanoparticles

• Fuat Topuz and
• Tamer Uyar

Beilstein J. Nanotechnol. 2018, 9, 693–703, doi:10.3762/bjnano.9.64

• /bjnano.9.64 Abstract Mesoporous silica nanoparticles (MSNs) have sparked considerable interest in drug/gene delivery, catalysis, adsorption, separation, sensing, antireflection coatings and bioimaging because of their tunable structural properties. The shape, size and pore structure of MSNs are greatly

• additives in a simple, one-pot reaction system for a wide range of applications. Keywords: cyclodextrin; faceted particles; mesoporous silica nanoparticles (MSN); microporous; Introduction With the availability of several types of surfactants and the increased understanding of sol–gel chemistry, numerous

• mesoporous silica nanoparticles (MSNs) with tunable structural properties have been developed [1][2][3][4][5][6][7][8][9][10][11]. Yet, there is still ongoing interest in the synthesis of tailored MSNs to optimize their performance in applications, such as catalysis, sensing, drug delivery and adsorption. So

Synthesis of metal-fluoride nanoparticles supported on thermally reduced graphite oxide

• Alexa Schmitz,
• Kai Schütte,
• Vesko Ilievski,
• Juri Barthel,
• Laura Burk,
• Rolf Mülhaupt,
• Junpei Yue,
• Bernd Smarsly and
• Christoph Janiak

Beilstein J. Nanotechnol. 2017, 8, 2474–2483, doi:10.3762/bjnano.8.247

• ] yielded metal fluoride nanoparticles for Mn, Fe and Co [63]. The reaction of metal acetate (hydrate) precursors in ethylene glycol and an excess of [BMIm][BF4] gave fluoride nanoparticles [67]. Mesoporous carbon/iron carbide hybrids were synthesized using mesoporous silica as template and the ionic liquid

Two-dimensional carbon-based nanocomposites for photocatalytic energy generation and environmental remediation applications

• Suneel Kumar,
• Ashish Kumar,
• Ashish Bahuguna,
• Vipul Sharma and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2017, 8, 1571–1600, doi:10.3762/bjnano.8.159

First examples of organosilica-based ionogels: synthesis and electrochemical behavior

• Andreas Taubert,
• Ruben Löbbicke,
• Barbara Kirchner and
• Fabrice Leroux

Beilstein J. Nanotechnol. 2017, 8, 736–751, doi:10.3762/bjnano.8.77

• box used for the experiments. Results Silica monoliths As stated in the introduction, mesoporous silica monoliths are often brittle and thus difficult to handle. The first goal of the current study is thus to provide a synthetic protocol towards more robust silica matrix materials suitable for IL

• transition temperatures do not change significantly by entrapping the IL inside the mesoporous silica networks made from acetone. The variations of Tg in the host materials made in methanol are somewhat more pronounced but also here Tg remains at around −9 °C. It has been pointed out by a referee of this

Chitosan-based nanoparticles for improved anticancer efficacy and bioavailability of mifepristone

• Huijuan Zhang,
• Fuqiang Wu,
• Yazhen Li,
• Xiping Yang,
• Jiamei Huang,
• Tingting Lv,
• Yingying Zhang,
• Jianzhong Chen,
• Haijun Chen,
• Yu Gao,
• Guannan Liu and
• Lee Jia

Beilstein J. Nanotechnol. 2016, 7, 1861–1870, doi:10.3762/bjnano.7.178

• could be another reason for the enhanced anti-proliferative efficiency of MCN. In our previous report, we loaded MIF into mesoporous silica nanoparticles (MSNs) coated with aEpCAM (aE-MSN-M) to target circulating tumor cells for cancer metastasis prevention, and also found that MIF entrapped in aE-MSN-M

Polystyrene-block-poly(ethylene oxide) copolymers as templates for stacked, spherical large-mesopore silica coatings: dependence of silica pore size on the PS/PEO ratio

• Roberto Nisticò,
• Giuliana Magnacca,
• Sushilkumar A. Jadhav and
• Dominique Scalarone

Beilstein J. Nanotechnol. 2016, 7, 1454–1460, doi:10.3762/bjnano.7.137

• ; mesoporous silica; soft templating; sol–gel; Introduction Mesoporous materials with large, tunable porosity are currently being investigated as selective molecular sieves, finding potential applications in many fields such as catalysis, encapsulation of proteins, filtration and separation of large molecules

• -b-PEO) [23], are among the most widely used soft templating agents to produce mesoporous silica. The templating process is based on the well-known attractive interaction between the silanol groups at the silica surface and PEO moieties [24]. In addition to Pluronics, other PEO containing amphiphilic

• copolymers with different size and block lengths (i.e., PS117-b-PEO543, PS183-b-PEO145, PS308-b-PEO250, and PS567-b-PEO704) were selected. HRTEM micrographs showing the mesoporous silica films prepared by soft templating of the four PS-b-PEO copolymers are reported in Figure 1 (95TEOS/5PS-b-PEO) and Figure 2

Cantilever bending based on humidity-actuated mesoporous silica/silicon bilayers

• Christian Ganser,
• Gerhard Fritz-Popovski,
• Roland Morak,
• Parvin Sharifi,
• Benedetta Marmiroli,
• Barbara Sartori,
• Heinz Amenitsch,
• Thomas Griesser,
• Christian Teichert and
• Oskar Paris

Beilstein J. Nanotechnol. 2016, 7, 637–644, doi:10.3762/bjnano.7.56

• environments. The potential of mesoporous “hard” materials such as nanoporous gold [11] or mesoporous silica [12] for such purposes has recently been highlighted, where the basic idea is to utilize the adsorption-induced deformation of highly porous materials. The simplest way of fabricating an actuator based

• -controlled actuation of a microcantilever based on a mesoporous silica/nonporous silicon bilayer using a commercial AFM cantilever as a substrate. The simplicity and versatility of the approach is promising for applications in several fields where similar systems based on swellable polymers are not

• applicable. Experimental Sample preparation AFM cantilevers and silicon wafers were coated with a mesoporous silica film using evaporation-induced self-assembly [14][15][16]. We employed tipless NSG30 cantilevers from NT-MDT (about 130 µm long, 45 µm wide, and about 4.5 µm thick) with a gold reflective

Selective porous gates made from colloidal silica nanoparticles

• Roberto Nisticò,
• Paola Avetta,
• Paola Calza,
• Debora Fabbri,
• Giuliana Magnacca and
• Dominique Scalarone

Beilstein J. Nanotechnol. 2015, 6, 2105–2112, doi:10.3762/bjnano.6.215

• hexagonally ordered pores were also employed as substrate for MCM-48 silica films, giving promising results [4][23][24]. The sol–gel polymerization process is a key procedure for the bottom-up synthesis of nano- and mesoporous silica films and in the literature there are several reviews focusing on this field

• [25][26]. Conventional procedures for the synthesis of mesoporous silica involve the use of amphiphilic templates [27][28][29][30]. Either low molecular weight surfactants or polymers have been used as structure-directing agents in the preparation of organic–inorganic hybrid solutions and they have

• characterized in order to assess their applicability as selective gates for controlled dosing and transport of chemical species in aqueous solution. The development of mesoporous silica membranes with depth-filter porous organization opens new perspectives in the production of miniaturized devices for

Silica micro/nanospheres for theranostics: from bimodal MRI and fluorescent imaging probes to cancer therapy

• Shanka Walia and
• Amitabha Acharya

Beilstein J. Nanotechnol. 2015, 6, 546–558, doi:10.3762/bjnano.6.57

• of dopant ions in a nanoparticle environment. Thus these new classes of materials can be used as potential fluorescent probes for biomedical imaging. Singh et al. [16] reported the synthesis of luminescent YVO4:Eu3+ NPs incorporated inside mesoporous silica NPs through a sol–gel process. The

• synthesis was enhanced by using Y(NO3)3·6H2O and Eu2O3 as reactants, CTAB as surfactant and TEOS as alkyl silicate. Finally, the anticancer drug doxyrubicin (DOX) was loaded into the prepared NPs. Characterization of mesoporous silica NPs (MSN), YVO4:Eu3+ NPs and YVO4-MSNs were done by XRD, FTIR, TEM and

• , fluorescent spectroscopy, TEM, SEM, FTIR and VSM. In FTIR, the bands at 1633 and 1565 cm−1 were observed for both magnetic mesoporous silica ZnO NPs and its corresponding Eu complex, which confirmed their association with silica spheres. The size of ZnO-containing magnetic mesoporous silica nanospheres was

Comparative evaluation of the impact on endothelial cells induced by different nanoparticle structures and functionalization

• Lisa Landgraf,
• Ines Müller,
• Peter Ernst,
• Miriam Schäfer,
• Christina Rosman,
• Isabel Schick,
• Oskar Köhler,
• Hartmut Oehring,
• Vladimir V. Breus,
• Thomas Basché,
• Carsten Sönnichsen,
• Wolfgang Tremel and
• Ingrid Hilger

Beilstein J. Nanotechnol. 2015, 6, 300–312, doi:10.3762/bjnano.6.28

• probably led to a higher uptake rate. Interestingly, Chen et al. observed a charge-dependent localization of mesoporous silica nanoparticles with positively charged particles in the cytosol and negatively charged ones in acidic endosomes [54]. Not only the surface coating but also the nanoparticle material

Caveolin-1 and CDC42 mediated endocytosis of silica-coated iron oxide nanoparticles in HeLa cells

• Nils Bohmer and
• Andreas Jordan

Beilstein J. Nanotechnol. 2015, 6, 167–176, doi:10.3762/bjnano.6.16

• [37] and mesoporous silica particles [40] exclusively through Clathrin mediated endocytosis and/or macropinocytosis. This discrepancy can be explained by the different physicochemical properties of the particles used. Especially in the field of iron-oxide nanoparticles more studies concerning the

Synthesis of boron nitride nanotubes and their applications

• Saban Kalay,
• Zehra Yilmaz,
• Ozlem Sen,
• Melis Emanet,
• Emine Kazanc and
• Mustafa Çulha

Beilstein J. Nanotechnol. 2015, 6, 84–102, doi:10.3762/bjnano.6.9

• ]. The BNNT–mesoporous silica (BNNT–MS) hybrids were reported for their use in drug delivery [85]. In this study, a negatively and positively charged BNNT–mesoporous silica, BNNT–MS and BNNT–MS–NH2, respectively, were produced. These structures were loaded with dox. The loading efficiency was found to be

The surface properties of nanoparticles determine the agglomeration state and the size of the particles under physiological conditions

• Christoph Bantz,
• Olga Koshkina,
• Thomas Lang,
• Hans-Joachim Galla,
• C. James Kirkpatrick,
• Roland H. Stauber and
• Michael Maskos

Beilstein J. Nanotechnol. 2014, 5, 1774–1786, doi:10.3762/bjnano.5.188

• -labelled particles, or of particles with defined surface functionalities [61][62][63][64]. Furthermore, the reaction principle of the Stöber synthesis is also applied for the preparation of mesoporous silica nanoparticles (MSN) [65]. With respect to particle size distributions, silica sols and Stöber

Functionalized nanostructures for enhanced photocatalytic performance under solar light

• Liejin Guo,
• Dengwei Jing,
• Maochang Liu,
• Yubin Chen,
• Shaohua Shen,
• Jinwen Shi and
• Kai Zhang

Beilstein J. Nanotechnol. 2014, 5, 994–1004, doi:10.3762/bjnano.5.113

• first reports on mesoporous silica MCM-41 [9], inorganic oxides with controlled porosity have been extensively investigated. It is known that mesoporous photocatalysts usually exhibit high specific surface areas that can provide more surface reactive sites. The nanoscale channel walls of mesoporous

Thermal stability and reduction of iron oxide nanowires at moderate temperatures

• Annalisa Paolone,
• Marco Angelucci,
• Stefania Panero,
• Maria Grazia Betti and
• Carlo Mariani

Beilstein J. Nanotechnol. 2014, 5, 323–328, doi:10.3762/bjnano.5.36

• mesoporous silica (SBA-15) synthesized through the sol–gel method. In order to embed the iron oxide nanowires, 0.01 M Fe(NO3)3·9H2O was dissolved in 50 mL of ethanol and added to 1 g of SBA-15. This solution was mixed at room temperature, dried at 310 K for 1 week, and the resulting powder was sintered at