Evaluation of electrosynthesized reduced graphene oxide–Ni/Fe/Co-based (oxy)hydroxide catalysts towards the oxygen evolution reaction

• Karolina Cysewska,
• Marcin Łapiński,
• Marcin Zając,
• Jakub Karczewski,
• Piotr Jasiński and
• Sebastian Molin

Beilstein J. Nanotechnol. 2023, 14, 420–433, doi:10.3762/bjnano.14.34

• was the structure of NiFe and the electroactive surface area of GO. Experimental Fabrication of the catalysts NiFe and CoNiFe oxides/(oxy)hydroxides were synthesized in a one-step process by electrodeposition at −1.1 V vs Ag/AgCl in an aqueous solution of 4 mM nickel(II) nitrate hexahydrate (Ni(NO3)2

• ·6H2O) (98%, Sigma-Aldrich), 4 mM iron(III) nitrate nonahydrate (Fe(NO3)3·9H2O) (98%, Sigma-Aldrich), and 0 or 4 mM cobalt(II) nitrate hexahydrate (Co(NO3)2·6H2O) (98%, Sigma-Aldrich) at 25 °C. NiFe-GO and CoNiFe-GO were fabricated in a two-step process: (1) electrodeposition of GO performed at −1.0 V

• time was limited to a charge of 200 mC for each deposition process. The deposition parameters, that is, the concentration of each metal nitrate and deposition charge, were optimized regarding the most efficient OER performance of the Ni-, Fe- and Co-based catalysts obtained in a previous work [25]. The

Quercetin- and caffeic acid-functionalized chitosan-capped colloidal silver nanoparticles: one-pot synthesis, characterization, and anticancer and antibacterial activities

• Akif Hakan Kurt,
• Elif Berna Olutas,
• Fatma Avcioglu,
• Hamza Karakuş,
• Mehmet Ali Sungur,
• Cansu Kara Oztabag and
• Muhammet Yıldırım

Beilstein J. Nanotechnol. 2023, 14, 362–376, doi:10.3762/bjnano.14.31

• quercetin (≥95%) were purchased from Sigma-Aldrich. Silver nitrate (AgNO3, ≥99.8%) was obtained from ISOLAB. Dimethyl sulfoxide (DMSO, ≥99.0%), glacial acetic acid (CH3COOH), anhydrous aluminium chloride (AlCl3, ≥98.0%), and Folin–Ciocalteau’s phenol reagent (2 N) were purchased from Merck. Water was

Antimicrobial and mechanical properties of functionalized textile by nanoarchitectured photoinduced Ag@polymer coating

• Jessica Plé,
• Marine Dabert,
• Helene Lecoq,
• Sophie Hellé,
• Lydie Ploux and
• Lavinia Balan

Beilstein J. Nanotechnol. 2023, 14, 95–109, doi:10.3762/bjnano.14.11

• (complete inhibition for approximately 2.5 and 15 µg/g released silver, respectively). The nanocomposite structure can thus be tuned in order to provide the best compromise between antimicrobial activity and mechanical longevity depending on the field of application. Experimental Materials Silver nitrate

Gap-directed chemical lift-off lithographic nanoarchitectonics for arbitrary sub-micrometer patterning

• Chang-Ming Wang,
• Hong-Sheng Chan,
• Chia-Li Liao,
• Che-Wei Chang and
• Wei-Ssu Liao

Beilstein J. Nanotechnol. 2023, 14, 34–44, doi:10.3762/bjnano.14.4

• purchased from Echo Chemical (Taipei, Taiwan). Hexamethyldisilazane (HMDS) was purchased from Sigma-Aldrich (St Louis, MO, USA). Iron nitrate and thiourea were purchased from Showa Chemical Industry Co., Ltd. (Tokyo, Japan). Positive photoresist AZ6112 was purchased from AZ Electronic Materials Taiwan Co

• structure characterization To transfer chemical patterns created by CLL to the underneath metal layer, a wet chemical etching process was adopted. After lifting the PDMS stamp from a SAM-modified Au substrate, the Au surface was immersed in an aqueous mixture containing 40 mM iron nitrate and 60 mM thiourea

• lift-off surface can serve as the molecular resist for the underneath material structure transfer. This concept is demonstrated by immersing a post-lift off surface in an aqueous mixture containing iron nitrate and thiourea for wet chemical etching (Figure 3A). The absence of SAM molecule protection at

In search of cytotoxic selectivity on cancer cells with biogenically synthesized Ag/AgCl nanoparticles

• Mitzi J. Ramírez-Hernández,
• Mario Valera-Zaragoza,
• Omar Viñas-Bravo,
• Ariana A. Huerta-Heredia,
• Miguel A. Peña-Rico,
• Erick A. Juarez-Arellano,
• David Paniagua-Vega,
• Eduardo Ramírez-Vargas and
• Saúl Sánchez-Valdes

Beilstein J. Nanotechnol. 2022, 13, 1505–1519, doi:10.3762/bjnano.13.124

• between cancer cells and healthy cells can be achieved. Experimental Materials MD2 hybrid pineapples (family: Bromeliaceae, genus: Ananas Mill, 1754, species: comosus (L.) Merr., 1917) were obtained from crops in the Tuxtepec region of the state of Oaxaca, Mexico. Silver nitrate (CAS 7761-88-8, ACS

Structural studies and selected physical investigations of LiCoO₂ obtained by combustion synthesis

• Monika Michalska,
• Paweł Ławniczak,
• Tomasz Strachowski,
• Adam Ostrowski and
• Waldemar Bednarski

Beilstein J. Nanotechnol. 2022, 13, 1473–1482, doi:10.3762/bjnano.13.121

• is a widely used method for the creation of nanomaterials [48][49][50][51][52][53][54][55][56][57]. Acetates, carbonates, and nitrate salts of lithium and cobalt are often utilized as starting materials and oxidizers in the combustion synthesis of lithium cobalt oxide [50][58][59]. Different ammonium

Supramolecular assembly of pentamidine and polymeric cyclodextrin bimetallic core–shell nanoarchitectures

• Alexandru-Milentie Hada,
• Nina Burduja,
• Marco Abbate,
• Claudio Stagno,
• Guy Caljon,
• Louis Maes,
• Nicola Micale,
• Massimiliano Cordaro,
• Angela Scala,
• Antonino Mazzaglia and
• Anna Piperno

Beilstein J. Nanotechnol. 2022, 13, 1361–1369, doi:10.3762/bjnano.13.112

• was not synergically promoted by PolyCD. Moreover, we assumed that the biological inactivity of pentamidine in nanoGSP could be attributed to its not prompt availability due to strong interactions of the drug with CD cavities. Experimental General remarks Tetrachloroauric acid (HAuCl4), silver nitrate

Recent trends in Bi-based nanomaterials: challenges, fabrication, enhancement techniques, and environmental applications

• Vishal Dutta,
• Ankush Chauhan,
• Ritesh Verma,
• C. Gopalkrishnan and
• Van-Huy Nguyen

Beilstein J. Nanotechnol. 2022, 13, 1316–1336, doi:10.3762/bjnano.13.109

Green synthesis of zinc oxide nanoparticles toward highly efficient photocatalysis and antibacterial application

• Vo Thi Thu Nhu,
• Nguyen Duy Dat,
• Le-Minh Tam and
• Nguyen Hoang Phuong

Beilstein J. Nanotechnol. 2022, 13, 1108–1119, doi:10.3762/bjnano.13.94

• applications. Nava et al. [26] prepared ZnO NPs using Camellia sinensis extracts and applied ZnO NPs to degrade methylene blue (MB). Ambika et al. [12] synthesized ZnO by a green method using a precursor from the Vitex negundo plant extract and zinc nitrate, and antimicrobial properties of ZnO NPs were

Solar-light-driven LaFe_xNi_1−xO₃ perovskite oxides for photocatalytic Fenton-like reaction to degrade organic pollutants

• Chao-Wei Huang,
• Shu-Yu Hsu,
• Jun-Han Lin,
• Yun Jhou,
• Wei-Yu Chen,
• Kun-Yi Andrew Lin,
• Yu-Tang Lin and
• Van-Huy Nguyen

Beilstein J. Nanotechnol. 2022, 13, 882–895, doi:10.3762/bjnano.13.79

• were lanthanum nitrate hexahydrate (99.9%, La(NO3)3·6H2O, Alfa Aesar), ferric nitrate nonahydrate (≥98.0%, Fe(NO3)3·9H2O, J.T. Baker), and nickel nitrate hexahydrate (98.0%, Ni(NO3)2·6H2O, Showa), respectively. The citric acid (95.0%, C6H8O7) and ammonia (28.0–30.0%, NH4OH) were both obtained from J.T

• synthesis. First, 0.02 mol lanthanum nitrate hexahydrate (La(NO3)3∙6H2O), ferric nitrate nonahydrate (Fe(NO3)3∙9H2O), and nickel nitrate hexahydrate (Ni(NO3)2∙6H2O) were dissolved in deionized water to form the mixed solution. Various photocatalysts with different molar ratios of Fe/Ni were manipulated at

• condensation and polymerization reactions occurred between citric acid and nitrate to chelate metal ions. Subsequently, the gel was formed and transferred to a high-temperature furnace for pre-calcination by self-propagating combustion in an air environment of 300 °C. The combustion duration was 20 min to

Hierarchical Bi₂WO₆/TiO₂-nanotube composites derived from natural cellulose for visible-light photocatalytic treatment of pollutants

• Zehao Lin,
• Zhan Yang and
• Jianguo Huang

Beilstein J. Nanotechnol. 2022, 13, 745–762, doi:10.3762/bjnano.13.66

• , anhydrous ethanol, acetone, barium sulfate (BaSO4), rhodamine B, isopropyl alcohol (IPA), N-methylpyrrolidone, ethylenediaminetetraacetic acid disodium salt (EDTA-2Na), silver nitrate (AgNO3), sodium sulfate (Na2SO4), ethylene glycol (EG), potassium dichromate (K2Cr2O7), phosphoric acid (H3PO4), and

• sulfuric acid (H2SO4) were purchased from Sinopharm Chemical Reagent Co., Ltd. (China). Titanium n-butoxide [Ti(OnBu)4], p-benzoquinone (p-BQ), bismuth nitrate pentahydrate [Bi(NO3)3·5H2O], sodium tungstate dihydrate (Na2WO4·2H2O), 1,5-diphenylcarbazide, and potassium iodate (KIO3) were bought from J&K

A nonenzymatic reduced graphene oxide-based nanosensor for parathion

• Sarani Sen,
• Anurag Roy,
• Ambarish Sanyal and
• Parukuttyamma Sujatha Devi

Beilstein J. Nanotechnol. 2022, 13, 730–744, doi:10.3762/bjnano.13.65

• , 100 mg of sodium nitrate (Merck) was added to 250 mg of graphite powder (Alfa Aesar) and further acidified with ≈5 mL of concentrated sulfuric acid (Merck) at a temperature range of 0–5 °C followed by vigorous stirring. In the next step, 600 mg of KMnO4 (Merck) was sequentially added to the

Interfacial nanoarchitectonics for ZIF-8 membranes with enhanced gas separation

• Season S. Chen,
• Zhen-Jie Yang,
• Chia-Hao Chang,
• Hoong-Uei Koh,
• Sameerah I. Al-Saeedi,
• Kuo-Lun Tung and
• Kevin C.-W. Wu

Beilstein J. Nanotechnol. 2022, 13, 313–324, doi:10.3762/bjnano.13.26

• films were synthesized via an interfacial method, while an interfacial method and a counter-diffusion method were adopted to synthesize α-Al2O3-supported ZIF-8 membranes for CO2/N2 gas separation. Materials and Methods Chemicals Zinc nitrate hexahydrate, 2-methylimidazole (2-MIM), sodium formate of

• reagent grade, methanol and 1-octanol of analysis grade were purchased from Sigma-Aldrich. Deionized water produced with a Merck Millipore system was used. The α-Al2O3 disks (30 mm in diameter and 1 mm in thickness) were purchased from Fraunhofer IKTS. Synthesis of ZIF-8 free-standing films Zinc nitrate

• -octanol solution was added dropwise to the zinc nitrate solution. The mixture was kept at 80 °C in an oil bath for 12 h to form a ZIF-8 free-standing thin film on the liquid–liquid interface. After the reaction, fragments of the ZIF-8 thin film were dispersed in methanol to remove solvents and unreacted

Tin dioxide nanomaterial-based photocatalysts for nitrogen oxide oxidation: a review

• Viet Van Pham,
• Hong-Huy Tran,
• Thao Kim Truong and
• Thi Minh Cao

Beilstein J. Nanotechnol. 2022, 13, 96–113, doi:10.3762/bjnano.13.7

• ]. Among them, photocatalytic oxidation is an efficient method of converting NOx into nitrate (NO3−) ions. The removal of NO3− ions is easy, efficient, and economic through chemical or biological methods such as the conversion of NO3− to N2 by aerobic microorganisms [9][10]. Figure 1b illustrates the

• suitable site for the formation of NO− intermediates to generate nitrite and nitrate products in the photocatalytic reaction processes. Moreover, additional OVs could be readily formed by thermal treatment under argon atmosphere. The work suggested an innovative approach for developing high-performance

Biocompatibility and cytotoxicity in vitro of surface-functionalized drug-loaded spinel ferrite nanoparticles

• Sadaf Mushtaq,
• Khuram Shahzad,
• Tariq Saeed,
• Anwar Ul-Hamid,
• Bilal Haider Abbasi,
• Nafees Ahmad,
• Waqas Khalid,
• Muhammad Atif,
• Zulqurnain Ali and
• Rashda Abbasi

Beilstein J. Nanotechnol. 2021, 12, 1339–1364, doi:10.3762/bjnano.12.99

• -field-assisted drug delivery are needed. Experimental Materials Iron nitrate [Fe(NO3)3·9H2O] and cobalt nitrate [Co(NO3)2·6H2O] (98%) were purchased from UNI-Chem. Zinc nitrate [Zn(NO3)2·6H2O)], nickel nitrate [Ni(NO3)2·6H2O], chloroform, and oleic acid (C18H34O2) (>99%) were purchased from Applichem

• method was used in the first step of the synthesis of MFe2O4 nanoparticles (0.2 M) by mixing iron nitrate [Fe(NO3)3·9H2O] and (Co/Zn/Ni) nitrates with a molar ratio of Fe/M (2:1) in 100 mL of deionized water. The solution was stirred for 15 min, heated at 70 °C, and further stirred for 1 h after the

The role of deep eutectic solvents and carrageenan in synthesizing biocompatible anisotropic metal nanoparticles

• Nabojit Das,
• Akash Kumar and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2021, 12, 924–938, doi:10.3762/bjnano.12.69

• for metal cleaning before the extensive use in electroplating. Electrolytic decomposition is another appealing process for developing a microscale propulsion system. Recent reports on the electrolytic decomposition of hydroxylammonium nitrate (HAN) were demonstrated [73][74][75]. DESs are well known

Modification of a SERS-active Ag surface to promote adsorption of charged analytes: effect of Cu²⁺ ions

• Bahdan V. Ranishenka,
• Andrei Yu. Panarin,
• Irina A. Chelnokova,
• Sergei N. Terekhov,
• Peter Mojzes and
• Vadim V. Shmanai

Beilstein J. Nanotechnol. 2021, 12, 902–912, doi:10.3762/bjnano.12.67

• round bottom flask and stirred until complete dissolution. Then, 640 µL of 4 mg/mL silver nitrate solution were added under vigorous stirring and kept for 4 h in the ultrasonic bath. The resulting silver nanoparticle solution was dialyzed against 2.5 mM sodium citrate and stored at 4 °С. Glass and

Silver nanoparticles nucleated in NaOH-treated halloysite: a potential antimicrobial material

• Yuri B. Matos,
• Rodrigo S. Romanus,
• Mattheus Torquato,
• Edgar H. de Souza,
• Rodrigo L. Villanova,
• Marlene Soares and
• Emilson R. Viana

Beilstein J. Nanotechnol. 2021, 12, 798–807, doi:10.3762/bjnano.12.63

• then evaluated in terms of surface antimicrobial activity. Experimental Halloysite (>99%), silver nitrate (AgNO3(s), >99%), and dodecanethiol were obtained from Sigma-Aldrich; sodium hydroxide (NaOH(s), >99%) was purchased from Alpha Quimica; low-density polyethylene (LDPE) was purchased from Braskem

• the three samples previously prepared: HNT-0, HNT-4, and HNT-8) were dispersed in 20 mL of AgNO3 solution (3 M) and left to rest for one day to load the silver nitrate into the clay structure. Then the samples were filtered, dried at 80 °C for 3 h, and heated to 500 °C for 15 min, to reduce AgNO3 into

• opening of the nanotubes into nanosheets was a welcomed surprise, as it exposes the aluminol phase to silver nucleation. Thermal reduction of silver nanoparticles The TGA and DSC analysis results of HNT loaded with silver nitrate are presented in Figure 5. Since the by-products of silver nitrate reduction

Fate and transformation of silver nanoparticles in different biological conditions

• Barbara Pem,
• Marija Ćurlin,
• Darija Domazet Jurašin,
• Valerije Vrček,
• Rinea Barbir,
• Vedran Micek,
• Raluca M. Fratila,
• Jesus M. de la Fuente and
• Ivana Vinković Vrček

Beilstein J. Nanotechnol. 2021, 12, 665–679, doi:10.3762/bjnano.12.53

• , TKA Wasseraufbereitungssysteme GmbH, Niederelbert, Germany). Synthesis and characterization of AgNPs stabilized with different coating agents AgNPs were synthesised by the reduction of silver nitrate with sodium borohydride in the presence of AOT, PVP, and PLL as coating agents to provide colloidal

High-yield synthesis of silver nanowires for transparent conducting PET films

• Gul Naz,
• Hafsa Asghar,
• Muhammad Ramzan,
• Muhammad Arshad,
• Rashid Ahmed,
• Muhammad Bilal Tahir,
• Bakhtiar Ul Haq,
• Nadeem Baig and
• Junaid Jalil

Beilstein J. Nanotechnol. 2021, 12, 624–632, doi:10.3762/bjnano.12.51

• synthesis, ethylene glycol was used as a reducing agent in the presence of PVP as capping agent. Silver nitrate and CuCl2 were used as sources of silver and metallic salt, respectively. The resultant nanowires grew 3.3–4.7 µm in length and 75–97 nm in diameter. A silver nanowire ink was then transferred to

• PET films whose transmittance was calculated to be up to 92.5%. Experimental Materials All required chemical reagents, that is, silver nitrate (AgNO3), ethyl glycol, polyvinylpyrrolidone (PVP), copper chloride (CuCl2), hydroxyethyl cellulose (HEC), polyethylene terephthalate (PET) film, acetone, and

• diameter, ethylene glycol (EG) was used as a solvent and also acted as a reducer. Silver nitrate (AgNO3) was used as source of silver. The stabilizer used in the reaction was PVP, which also acted as a capping agent. In addition to stabilizing and capping, PVP also prevented the agglomeration of silver

The preparation temperature influences the physicochemical nature and activity of nanoceria

• Robert A. Yokel,
• Wendel Wohlleben,
• Johannes Georg Keller,
• Matthew L. Hancock,
• Jason M. Unrine,
• D. Allan Butterfield and
• Eric A. Grulke

Beilstein J. Nanotechnol. 2021, 12, 525–540, doi:10.3762/bjnano.12.43

• nitrate. Cassette/beaker systems were housed in a rotary shaking incubator at 37 °C rotated at 60 rpm. Dissolution was determined from the bath cerium concentration measured weekly for 2688 h (16 weeks). Citric and lactic acids (110 mM in the baths), previously shown to accelerate nanoceria dissolution

Surface-enhanced Raman scattering of water in aqueous dispersions of silver nanoparticles

• Paulina Filipczak,
• Krzysztof Hałagan,
• Jacek Ulański and
• Marcin Kozanecki

Beilstein J. Nanotechnol. 2021, 12, 497–506, doi:10.3762/bjnano.12.40

• synthesized via simple chemical reduction of silver nitrate with sodium borohydride [36]. The volume added of potassium bromide during the synthesis was crucial for the size control of AgNPs. The sample without added KBr turned blue and the ample with 40 µL of the added KBr turned yellow. The synthesized

Rapid controlled synthesis of gold–platinum nanorods with excellent photothermal properties under 808 nm excitation

• Jialin Wang,
• Qianqian Duan,
• Min Yang,
• Boye Zhang,
• Li Guo,
• Pengcui Li,
• Wendong Zhang and
• Shengbo Sang

Beilstein J. Nanotechnol. 2021, 12, 462–472, doi:10.3762/bjnano.12.37

• Reagents Gold(III) chloride trihydrate (HAuCl4·3H2O), potassium tetrachloroplatinate(II) (K2PtCl4), silver nitrate (AgNO3), cetyltrimethylammonium bromide (CTAB), ascorbic acid, and sodium borohydride (NaBH4) were purchased from Sinopharm Chemical Reagent Co. Ltd. (Taiyuan, China). Deionized water was used

Doxorubicin-loaded gold nanorods: a multifunctional chemo-photothermal nanoplatform for cancer management

• Uzma Azeem Awan,
• Abida Raza,
• Shaukat Ali,
• Rida Fatima Saeed and
• Nosheen Akhtar

Beilstein J. Nanotechnol. 2021, 12, 295–303, doi:10.3762/bjnano.12.24

• -related side effects in cancer management. Experimental Materials CTAB (99.9%), hydrogen tetrachloroaurate(III) trihydrate (HAuCl4·3H2O 99%), ʟ-ascorbic acid (C6H8O6, 99%), sodium borohydride (NaBH4, 98%), silver nitrate (AgNO3, 99%), doxorubicin, (98%) poly(sodium 4-styrenesulfonate) (PSS; Mw = 70,000

Characterization, bio-uptake and toxicity of polymer-coated silver nanoparticles and their interaction with human peripheral blood mononuclear cells

• Sahar Pourhoseini,
• Reilly T. Enos,
• Angela E. Murphy,
• Bo Cai and
• Jamie R. Lead

Beilstein J. Nanotechnol. 2021, 12, 282–294, doi:10.3762/bjnano.12.23

• comprehensive test. Experimental Synthesis and characterization of PVP-AgNPs Citrate-capped AgNPs (cit-AgNPs) were synthesized by the standard reduction of silver nitrate (AgNO3) in trisodium citrate as described in previous publications [56][57][58]. Briefly, separate solutions of AgNO3, trisodium citrate, and