Synthesis of coaxial nanotubes of polyaniline and poly(hydroxyethyl methacrylate) by oxidative/initiated chemical vapor deposition

• Alper Balkan,
• Efe Armagan and
• Gozde Ozaydin Ince

Beilstein J. Nanotechnol. 2017, 8, 872–882, doi:10.3762/bjnano.8.89

• temperatures varied between 25 and 80 °C for different experiments. After the polymer coating, PANI-coated Si wafers were annealed at temperatures ranging between 40 and 180 °C for 4 h in a vacuum oven. For PANI flat thin film characterization, FTIR spectrophotometry (Thermo Fischer Scientific Model

Vapor deposition routes to conformal polymer thin films

• Priya Moni,
• Ahmed Al-Obeidi and
• Karen K. Gleason

Beilstein J. Nanotechnol. 2017, 8, 723–735, doi:10.3762/bjnano.8.76

• laboratories to fabricate the Si nanowire arrays and Dr. Nan Chen for the iCVD pV4D4 coating on the nanowire arrays used in Figure 8. The image of micro-trench with vapor deposited polymer coating in the graphical abstract was reproduced with permission from [8], copyright 2008 John Wiley and Sons.

α-((4-Cyanobenzoyl)oxy)-ω-methyl poly(ethylene glycol): a new stabilizer for silver nanoparticles

• Jana Lutze,
• Miguel A. Bañares,
• Marcos Pita,
• Andrea Haase,
• Andreas Luch and
• Andreas Taubert

Beilstein J. Nanotechnol. 2017, 8, 627–635, doi:10.3762/bjnano.8.67

• function of the pH value both for the free stabilizer and for the polymers bound to the surface of the silver nanoparticles using 1H NMR spectroscopy and zeta potential measurements. The polymer shows a high stability between pH 3 and 9. At pH 12 and higher the polymer coating is degraded over time

• anchors. Keywords: cyano anchor group; poly(ethylene glycol); polymer coating; silver nanoparticles; Introduction Nanoparticles (NPs), especially metal NPs such as gold and silver NPs (SNPs), are currently among the most popular research subjects and many particles have been suggested for applications

• modification with CBAmPEG, the resulting CBAmPEG@SNP nanoparticles show a halo around each silver core demonstrating that the particles are indeed modified with the polymer coating. The polymer layer is (in the vacuum-induced dry state in the TEM) about 4 nm thick. Further analysis of CBAmPEG@SNP in aqueous

The longstanding challenge of the nanocrystallization of 1,3,5-trinitroperhydro-1,3,5-triazine (RDX)

• Florent Pessina and
• Denis Spitzer

Beilstein J. Nanotechnol. 2017, 8, 452–466, doi:10.3762/bjnano.8.49

• synthesis of 30 nm RDX in a pH 7-stabilized solution. For such sizes and even at that pH, agglomeration and Ostwald ripening occur. Therefore, to avoid the degradation of the nanoparticles, a polymer coating (PEI or poly(vinylpyrrolidone) (PVP)) is necessary. It should be mentioned that no subsequent

Methods for preparing polymer-decorated single exchange-biased magnetic nanoparticles for application in flexible polymer-based films

• Laurence Ourry,
• Delphine Toulemon,
• Souad Ammar and
• Fayna Mammeri

Beilstein J. Nanotechnol. 2017, 8, 408–417, doi:10.3762/bjnano.8.43

• catalytic Cu-PMDETA complex, with polymerization times of 1 to 3 h. The polymer coating was characterized by X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA) [15]. For all samples the grafted chain density was 1.4 chain nm−2, i.e., significantly higher than the results previously

• C 1s peak prior to functionalization indicates that organic residues (polyol and acetate molecules) are present at the core–shell NP surface. The Co 2p and Fe 2p peaks are much weaker after polymerization due the presence of a significant polymer coating. The decomposition of the C 1s peak for

Graphene–polymer coating for the realization of strain sensors

• Carmela Bonavolontà,
• Carla Aramo,
• Massimo Valentino,
• Giampiero Pepe,
• Sergio De Nicola,
• Gianfranco Carotenuto,
• Angela Longo,
• Mariano Palomba,
• Simone Boccardi and
• Carosena Meola

Beilstein J. Nanotechnol. 2017, 8, 21–27, doi:10.3762/bjnano.8.3

An efficient recyclable magnetic material for the selective removal of organic pollutants

• Clément Monteil,
• Nathalie Bar,
• Agnès Bee and
• Didier Villemin

Beilstein J. Nanotechnol. 2016, 7, 1447–1453, doi:10.3762/bjnano.7.136

• Wastewater cleaning strategies based on the adsorption of materials are being increasingly considered, but the wide variety of organic pollutants at low concentrations still makes their removal a challenge. The hybrid material proposed here consists of a zwitterionic polyethylenimine polymer coating a

The distribution and degradation of radiolabeled superparamagnetic iron oxide nanoparticles and quantum dots in mice

• Denise Bargheer,
• Artur Giemsa,
• Barbara Freund,
• Markus Heine,
• Christian Waurisch,
• Gordon M. Stachowski,
• Stephen G. Hickey,
• Alexander Eychmüller,
• Jörg Heeren and
• Peter Nielsen

Beilstein J. Nanotechnol. 2015, 6, 111–123, doi:10.3762/bjnano.6.11

• micelles or polymer coating). For the synthesis of the 65Zn-Qdots, an aliquot of an acidic 65ZnCl2 solution (20–40 µCi, 13–25 µg Zn) was lyophilized to dryness, and a solution of lyophilic Qdots in chloroform was added and stirred at room temperature for 24 h. The same polymer as described above was used

• 51Cr-WBR for each individual mouse is given at day 7 day (which is taken as the apparent gastrointestinal 51Cr absorption). Stability of 65Zn-radiolabeled Qdots with a polymer coating. (A) Dialysis of 65Zn-radiolabeled and polymer-coated Qdots. The Qdots were transferred to a dialysis tube and the

The fate of a designed protein corona on nanoparticles in vitro and in vivo

• Denise Bargheer,
• Julius Nielsen,
• Gabriella Gébel,
• Markus Heine,
• Sunhild C. Salmen,
• Roland Stauber,
• Horst Weller,
• Joerg Heeren and
• Peter Nielsen

Beilstein J. Nanotechnol. 2015, 6, 36–46, doi:10.3762/bjnano.6.5

• resulted in a more neutral particle (B), reaction with PEG-bisamine in an even cationic particle (C) as seen in electrophoresis (left Quantum dots, right SPIOs with the same polymer-coating and the same pegylation). Modification of the EDC concentration resulted in gradually PEGylated products, which can

PVP-coated, negatively charged silver nanoparticles: A multi-center study of their physicochemical characteristics, cell culture and in vivo experiments

• Sebastian Ahlberg,
• Alexandra Antonopulos,
• Jörg Diendorf,
• Ralf Dringen,
• Matthias Epple,
• Rebekka Flöck,
• Wolfgang Goedecke,
• Christina Graf,
• Nadine Haberl,
• Jens Helmlinger,
• Fabian Herzog,
• Frederike Heuer,
• Stephanie Hirn,
• Christian Johannes,
• Stefanie Kittler,
• Manfred Köller,
• Katrin Korn,
• Wolfgang G. Kreyling,
• Fritz Krombach,
• Jürgen Lademann,
• Kateryna Loza,
• Eva M. Luther,
• Marcelina Malissek,
• Martina C. Meinke,
• Daniel Nordmeyer,
• Anne Pailliart,
• Jörg Raabe,
• Fiorenza Rancan,
• Barbara Rothen-Rutishauser,
• Eckart Rühl,
• Carsten Schleh,
• Andreas Seibel,
• Christina Sengstock,
• Lennart Treuel,
• Annika Vogt,
• Katrin Weber and
• Reinhard Zellner

Beilstein J. Nanotechnol. 2014, 5, 1944–1965, doi:10.3762/bjnano.5.205

• containing PVP-coated silver nanoparticles at various concentrations as well as the corresponding analytical plot. Equilibrium constants for the adsorption of albumin to silver and gold nanoparticles with and without a PVP coating were determined, revealing the influence of the polymer coating on the ability

The surface properties of nanoparticles determine the agglomeration state and the size of the particles under physiological conditions

• Christoph Bantz,
• Olga Koshkina,
• Thomas Lang,
• Hans-Joachim Galla,
• C. James Kirkpatrick,
• Roland H. Stauber and
• Michael Maskos

Beilstein J. Nanotechnol. 2014, 5, 1774–1786, doi:10.3762/bjnano.5.188

• absence of proteins is considered to be due to loose inter-particle entanglements of the polymer coating. In summary, we demonstrated that the variation of the surface properties of SiO2-based nanoparticles directly affects the agglomeration behavior under non-physiological as well as physiological

In vitro toxicity and bioimaging studies of gold nanorods formulations coated with biofunctional thiol-PEG molecules and Pluronic block copolymers

• Tianxun Gong,
• Douglas Goh,
• Malini Olivo and
• Ken-Tye Yong

Beilstein J. Nanotechnol. 2014, 5, 546–553, doi:10.3762/bjnano.5.64

• hydrophilic and positively charge [18][19]. Therefore, a surface functionalization platform is needed to furnish a AuNR surface with a biocompatible polymer-coating for reducing their cytotoxicity while maintaining colloidal stability and allowing them to be conjugated for biomedical applications. Bio

• surfaces are functionalized with CTAB molecules. This formulation is highly toxic and not suitable to be used for any biological applications. To employ the AuNRs for biological studies, the surface of AuNRs needs to be passivated with a biocompatible polymer coating. The encapsulation of AuNRs with PEG-SH

Porous polymer coatings as substrates for the formation of high-fidelity micropatterns by quill-like pens

• Michael Hirtz,
• Marcus Lyon,
• Wenqian Feng,
• Andrea E. Holmes,
• Harald Fuchs and
• Pavel A. Levkin

Beilstein J. Nanotechnol. 2013, 4, 377–384, doi:10.3762/bjnano.4.44

• . Recently we introduced a method for the preparation of a porous biocompatible polymer coating on a solid substrate, using in situ free radical polymerization of methacrylate monomers in the presence of porogens [4]. Porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate, HEMA) was shown to

Functionalization of vertically aligned carbon nanotubes

• Eloise Van Hooijdonk,
• Carla Bittencourt,
• Rony Snyders and
• Jean-François Colomer

Beilstein J. Nanotechnol. 2013, 4, 129–152, doi:10.3762/bjnano.4.14

• two-step method can be applied [125]. It consists of sheathing the nanotubes with a thin layer of polymer coating by means of a radio-frequency hexane-plasma treatment, followed by a water-induced restructuring. Another example is the synthesis of conducting coaxial nanowires, useful for

Characterization of protein adsorption onto FePt nanoparticles using dual-focus fluorescence correlation spectroscopy

• Pauline Maffre,
• Karin Nienhaus,
• Faheem Amin,
• Wolfgang J. Parak and
• G. Ulrich Nienhaus

Beilstein J. Nanotechnol. 2011, 2, 374–383, doi:10.3762/bjnano.2.43

• , we employed the same type of NP as in our previous work [11], namely, FePt cores that were rendered fluorescent by incorporating a small number of red fluorescent dye molecules (DY-636) in the polymer-coating surrounding the core [29]. The polymer shell contained a large number of carboxyl groups