A review of metal-organic frameworks and polymers in mixed matrix membranes for CO₂ capture

• Charlotte Skjold Qvist Christensen,
• Nicholas Hansen,
• Mahboubeh Motadayen,
• Nina Lock,
• Martin Lahn Henriksen and
• Jonathan Quinson

Beilstein J. Nanotechnol. 2025, 16, 155–186, doi:10.3762/bjnano.16.14

• functional theory (DFT) calculations and supported by neutron powder diffraction experiments and infrared spectroscopy [52][63][64][65]. It is agreed in literature that CO2 molecules bind to Mg2+ sites with end-on coordination, forming an angular Mg2+·OCO complex, with the rotation angle θ depending on the

• formed may not fully represent the structure of the fabricated MOF-based MMMs. While electron microscopy offers a highly detailed qualitative analysis of specific regions within the membrane, methods such as Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR) spectroscopy

Clays enhanced with niobium: potential in wastewater treatment and reuse as pigment with antibacterial activity

• Silvia Jaerger,
• Patricia Appelt,
• Mario Antônio Alves da Cunha,
• Fabián Ccahuana Ayma,
• Ricardo Schneider,
• Carla Bittencourt and
• Fauze Jacó Anaissi

Beilstein J. Nanotechnol. 2025, 16, 141–154, doi:10.3762/bjnano.16.13

• radiation (λ = 1.5410 Å) operating at 40 kV and 30 mA. Data were collected in scanning mode in steps between 4° and 75° (2θ) with a step size of 0.05°/s. The basal distance was obtained using Bragg's Law. Fourier-transform infrared spectroscopy (FTIR) spectra were collected on a Perkin Elmer Frontier FTIR

Nanocarriers and macrophage interaction: from a potential hurdle to an alternative therapeutic strategy

• Naths Grazia Sukubo,
• Paolo Bigini and
• Annalisa Morelli

Beilstein J. Nanotechnol. 2025, 16, 97–118, doi:10.3762/bjnano.16.10

• cancer cells upon near-infrared light exposure, significantly reducing tumor size with minimal damage to surrounding tissues [99]. Moreover, NCs can be designed to deliver immunomodulatory agents, such as checkpoint inhibitors or cytokines, directly to the tumor microenvironment to enhance antitumor

Characterization of ZnO nanoparticles synthesized using probiotic Lactiplantibacillus plantarum GP258

• Prashantkumar Siddappa Chakra,
• Aishwarya Banakar,
• Shriram Narayan Puranik,
• Vishwas Kaveeshwar,
• C. R. Ravikumar and
• Devaraja Gayathri

Beilstein J. Nanotechnol. 2025, 16, 78–89, doi:10.3762/bjnano.16.8

• characterization using UV–vis spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction measurements, energy-dispersive X-ray spectroscopy, scanning and transmission electron microscopy, photocatalytic studies, electrochemical analysis, and determination of antibacterial and anticancer activity. The

• analysis, (b) Fourier-transform infrared (FTIR) spectroscopy, (c) UV–vis spectroscopy, and (d) photocatalytic efficiency of ZnO NPs. (a, b) Transmission electron microscopy (TEM) micrographs showing the morphology and size of the nanoparticles. (c) Selected area electron diffraction (SAED) pattern of ZnO

Advanced atomic force microscopy techniques V

• Philipp Rahe,
• Ilko Bald,
• Nadine Hauptmann,
• Regina Hoffmann-Vogel,
• Harry Mönig and
• Michael Reichling

Beilstein J. Nanotechnol. 2025, 16, 54–56, doi:10.3762/bjnano.16.6

• al. present the application of AFM-based infrared nanospectroscopy to coated polymer surfaces [11]. The authors prepare thin films of SiOx on polypropylene surfaces by plasma-enhanced chemical vapor deposition (PE-CVD), which is commonly done to improve gas barrier properties of polypropylene. They

Heterogeneous reactions in a HFCVD reactor: simulation using a 2D model

• Xochitl Aleyda Morán Martínez,
• José Alberto Luna López,
• Zaira Jocelyn Hernández Simón,
• Gabriel Omar Mendoza Conde,
• José Álvaro David Hernández de Luz and
• Godofredo García Salgado

Beilstein J. Nanotechnol. 2024, 15, 1627–1638, doi:10.3762/bjnano.15.128

• give rise to the surface reactions for the growth of the films. In the reaction mechanisms reported for the growth of SiO2 films, the role of intermediate •H and •OH and •O2 radicals has been pointed out through in situ Fourier-transform infrared spectroscopy. These species react with silane-derived

Facile synthesis of size-tunable L-carnosine-capped silver nanoparticles and their role in metal ion sensing and catalytic degradation of p-nitrophenol

• Akash Kumar,
• Ridhima Chadha,
• Abhishek Das,
• Nandita Maiti and
• Rayavarapu Raja Gopal

Beilstein J. Nanotechnol. 2024, 15, 1576–1592, doi:10.3762/bjnano.15.124

• . The functionalization of AgNPs with ʟ-carnosine was validated through Fourier-transform infrared spectroscopy (FTIR, Thermo Scientific Nicolet iS5, USA). For this, 10 mg of air-dried nanopowder was placed over a diamond, and the software (OMNIC™) was run over the spectral range of 400–4000 cm−1. The

• stable than the one in Figure S4d by 1.713 kcal/mol. The infrared and Raman frequencies were computed for all possible forms of ʟ-carnosine, its anionic form, and the ʟ-carnosine–(Ag)4 complexes. The observed FTIR and Raman peaks are assigned based on the theoretical (B3LYP/6-31+G*)-computed frequencies

Electrochemical nanostructured CuBTC/FeBTC MOF composite sensor for enrofloxacin detection

• Thi Kim Ngan Nguyen,
• Tien Dat Doan,
• Huy Hieu Luu,
• Hoang Anh Nguyen,
• Thi Thu Ha Vu,
• Quang Hai Tran,
• Ha Tran Nguyen,
• Thanh Binh Dang,
• Thi Hai Yen Pham and
• Mai Ha Hoang

Beilstein J. Nanotechnol. 2024, 15, 1522–1535, doi:10.3762/bjnano.15.120

• method and characterized using various techniques, including X-ray diffraction, Fourier-transform infrared spectroscopy, Brunauer–Emmett–Teller analysis, and X-ray photoelectron spectroscopy. The MOF mixture exhibited a particle size ranging from 40 to 100 nm, a high surface area of 1147 m2/g, a pore

Strain-induced bandgap engineering in 2D ψ-graphene materials: a first-principles study

• Kamal Kumar,
• Nora H. de Leeuw,
• Jost Adam and
• Abhishek Kumar Mishra

Beilstein J. Nanotechnol. 2024, 15, 1440–1452, doi:10.3762/bjnano.15.116

• calculations and concluded that ψ-graphene has the potential to be employed in infrared (IR) sensors, ultraviolet (UV) optomechanical sensors, and visible-light sensors [39]. Li et al. theoretically reported a maximum theoretical storage capacity of 372 mAh·g−1 for Li, showing its capability to be utilized as

Lithium niobate on insulator: an emerging nanophotonic crystal for optimized light control

• Midhun Murali,
• Amit Banerjee and
• Tanmoy Basu

Beilstein J. Nanotechnol. 2024, 15, 1415–1426, doi:10.3762/bjnano.15.114

• from the visible to the infrared (400–5000 nm) [13]. The high degree of flexibility in fabrication created functional photonic nanostructures such as microring, periodically poled lithium niobate, and photonic crystals [14][15]. This versatility makes it suitable for DBRs to be used in various

• periodicity and layer thickness is important for a photonic crystal. SiO2 exhibits a wide transparency range, enabling its application across diverse wavelengths, including both the visible and near-infrared spectra [17][18][19][20][21][22][23]. TiO2 is a frequently utilized material in photonic crystals

• layer to absorb four times more near-infrared light [43]. Flip-chip micro light-emitting diodes (micro-LEDs) are a revolutionary technology with the potential to create next-generation HDR displays due to their tiny size, exceptional brightness, wide color gamut, and energy efficiency [44][45][46

A biomimetic approach towards a universal slippery liquid infused surface coating

• Ryan A. Faase,
• Madeleine H. Hummel,
• AnneMarie V. Hasbrook,
• Andrew P. Carpenter and
• Joe E. Baio

Beilstein J. Nanotechnol. 2024, 15, 1376–1389, doi:10.3762/bjnano.15.111

• processing and analysis of the collected scans included a lowpass filter and took place in the “NanoScope analysis” software. Sum frequency generation vibrational spectroscopy The SFG setup used an EKSLPA Nd:YAG laser operated at 50 Hz to generate a fixed visible (532 nm−1) and tunable infrared beam (1000

• wavenumber range of 1100–1800 cm−1. The spectra were then normalized by dividing the signal by the visible and infrared intensities. X-ray photoelectron spectroscopy Spectra were collected on a PHI 5600 system with a hemispherical analyzer and a monochromatic Al Kα (1486.6 eV) X-ray source with an electron

Green synthesis of carbon dot structures from Rheum Ribes and Schottky diode fabrication

• Muhammed Taha Durmus and
• Ebru Bozkurt

Beilstein J. Nanotechnol. 2024, 15, 1369–1375, doi:10.3762/bjnano.15.110

• Cary Eclipse fluorescence spectrophotometer were used for transmission electron microscopy (TEM), zeta potential measurements, X-ray diffractometry (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), micro-Raman spectroscopy, PVD thermal evaporation, scanning

Investigation of Hf/Ti bilayers for the development of transition-edge sensor microcalorimeters

• Victoria Y. Safonova,
• Anna V. Gordeeva,
• Anton V. Blagodatkin,
• Dmitry A. Pimanov,
• Anton A. Yablokov and
• Andrey L. Pankratov

Beilstein J. Nanotechnol. 2024, 15, 1353–1361, doi:10.3762/bjnano.15.108

• , for example, for the detection of dark matter, as single-photon detectors (X-ray, visible, and infrared ranges) [1], and the detection of individual excimers [2]. One of the new applications is the detection of the recoil energy of 4He atoms evaporated from a superfluid condensate (helium II). This

Hymenoptera and biomimetic surfaces: insights and innovations

• Vinicius Marques Lopez,
• Carlo Polidori and
• Rhainer Guillermo Ferreira

Beilstein J. Nanotechnol. 2024, 15, 1333–1352, doi:10.3762/bjnano.15.107

• morphology (triangular cross section with two corrugated surfaces) associated with a strong optical reflection in the visible and near-infrared (NIR) range, while maximizing heat emissivity in the mid-infrared (MIR). This allows the insects to maintain a lower thermal steady state and to cope with high

Nanoarchitectonics with cetrimonium bromide on metal nanoparticles for linker-free detection of toxic metal ions and catalytic degradation of 4-nitrophenol

• Akash Kumar and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2024, 15, 1312–1332, doi:10.3762/bjnano.15.106

• used for measurement. The functionalization of AgNS, AuNS, AuNR1, and AuNR2 with CTAB was validated through Fourier-transform infrared spectroscopy (Thermo Scientific, Nicolet iS5, USA). 10 mg of the air-dried nanoparticles were placed over a diamond and measured in the range of 400–4000 cm−1

Interaction of graphene oxide with tannic acid: computational modeling and toxicity mitigation in C. elegans

• Romana Petry,
• James M. de Almeida,
• Francine Côa,
• Felipe Crasto de Lima,
• Diego Stéfani T. Martinez and
• Adalberto Fazzio

Beilstein J. Nanotechnol. 2024, 15, 1297–1311, doi:10.3762/bjnano.15.105

• biological medium. In the Fourier-transform infrared spectroscopy (FTIR) analysis (Figure 2a), we observed bands between 3000 and 4000 cm−1 related to –OH strength in all spectra. GO spectra presented fingerprint bands at 1734, 1625, 1390, 1230, and 1068 cm−1, which correspond to C=O stretching vibrations

Mn-doped ZnO nanopowders prepared by sol–gel and microwave-assisted sol–gel methods and their photocatalytic properties

• Cristina Maria Vlăduț,
• Crina Anastasescu,
• Silviu Preda,
• Oana Catalina Mocioiu,
• Simona Petrescu,
• Jeanina Pandele-Cusu,
• Dana Culita,
• Veronica Bratan,
• Ioan Balint and
• Maria Zaharescu

Beilstein J. Nanotechnol. 2024, 15, 1283–1296, doi:10.3762/bjnano.15.104

• methods. Fourier-transform infrared spectroscopy Figure 1 shows the FTIR spectra of as-prepared gels obtained by SG and MW. The broad band in the 3600–2500 cm−1 region can be assigned to overlapping characteristic vibrations of C–H, N–H, and O–H bonds. The small bands at 2972, 2866, and 2747 cm−1 are

• the SG sample (Figure 4a), while larger, well-defined prismatic particles are found in the MW sample. EDX analysis highlights the presence of Mn in both samples. Fourier-transform infrared spectroscopy Figure 5 presents the FTIR spectra of the thermally treated samples, revealing the absence of bands

• /min. Characterization Fourier transform infrared spectra (FTIR) were recorded with a Nicolet 6700 apparatus in the range of 400–4000 cm−1. The resolution was 4 cm−1. The powders were pressed in KBr pellets, and the spectra were recorded in absorbance mode. Differential thermal analysis (DTA) and

Realizing active targeting in cancer nanomedicine with ultrasmall nanoparticles

• André F. Lima,
• Giselle Z. Justo and
• Alioscka A. Sousa

Beilstein J. Nanotechnol. 2024, 15, 1208–1226, doi:10.3762/bjnano.15.98

• ’ dots) composed of encapsulated Cy5 near-infrared (NIR) dyes, a protective PEG layer, the drug exatecan conjugated via a cathepsin-B cleavable linker, and folic acid targeting molecules (Figure 3A) [115]. The multifunctional C’ dot particles contained on average 21 exatecan and 13 folic acid molecules

• -infrared (NIR) dye MPA. Tumor-bearing mice were employed to assess the tumor specificity of AuNC-MPA, AuNC-MPA-cRGD, and AuNC-MPA-cRGD-AS1411 using in vivo NIR fluorescence imaging. Both targeted AuNCs accumulated in the tumor, while the control AuNC-MPA showed negligible accumulation. However, the

Synthesis, characterization and anticancer effect of doxorubicin-loaded dual stimuli-responsive smart nanopolymers

• Ömür Acet,
• Pavel Kirsanov,
• Burcu Önal Acet,
• Inessa Halets-Bui,
• Dzmitry Shcharbin,
• Şeyda Ceylan Cömert and
• Mehmet Odabaşı

Beilstein J. Nanotechnol. 2024, 15, 1189–1196, doi:10.3762/bjnano.15.96

• . Characterizations of the synthesized nanostructures were carried out including zeta potential measurements, Fourier-transform infrared spectroscopy, and scanning electron microscopy. The loading capacity of the nanopolymers for DOX was investigated, and encapsulation and release studies were carried out. In a final

• Centrifugen, USA). The precipitated nanostructures were redispersed in distilled water utilizing a sonicator and dried with a lyophilizer. Then, the nanostructures were stored at 4 °C. Characterization studies Functional group analysis was carried out by Fourier-transform infrared (FTIR) spectroscopy

Unveiling the potential of alginate-based nanomaterials in sensing technology and smart delivery applications

• Shakhzodjon Uzokboev,
• Khojimukhammad Akhmadbekov,
• Ra’no Nuritdinova,
• Salah M. Tawfik and
• Yong-Ill Lee

Beilstein J. Nanotechnol. 2024, 15, 1077–1104, doi:10.3762/bjnano.15.88

• solvent using the Doppler approach, which measures particle velocity as a function of voltage. The determination of the zeta potential is crucial in understanding the mechanism of drug–nanoparticle interactions [66]. In addition to the methods described above, Fourier-transform infrared spectroscopy is

Bolometric IR photoresponse based on a 3D micro-nano integrated CNT architecture

• Yasameen Al-Mafrachi,
• Sandeep Yadav,
• Sascha Preu,
• Jörg J. Schneider and
• Oktay Yilmazoglu

Beilstein J. Nanotechnol. 2024, 15, 1030–1040, doi:10.3762/bjnano.15.84

• resistance (TCR). These properties are advantageous for new bolometric sensors with high voltage responsivity and broadband absorption from the infrared (IR) to the terahertz spectrum. Preliminary performance evaluations have shown current and voltage responsivities of 2 mA/W and 30 V/W, respectively, in

• integration techniques make it important for real-time broadband imaging systems. Keywords: 3D micro-nano architecture; blackbody absorption; CNT microbolometer; high responsivity; high spatial resolution; Introduction Non-cryogenic infrared (IR) microbolometers represent a cutting-edge technology with

• [8], the effective reflection from the forest decreased very rapidly. MWCNTs have also been used as absorbers in the infrared region (2–20 μm) with an optical absorption coefficient above 90% [10]. Similar values were achieved for different synthesis temperatures (500–700 °C) with different CNT

Therapeutic effect of F127-folate@PLGA/CHL/IR780 nanoparticles on folate receptor-expressing cancer cells

• Thi Ngoc Han Pham,
• Phuong-Thao Dang-Luong,
• Hong-Phuc Nguyen,
• Loc Le-Tuan,
• Xuan Thang Cao,
• Thanh-Danh Nguyen,
• Vy Tran Anh and
• Hieu Vu_Quang

Beilstein J. Nanotechnol. 2024, 15, 954–964, doi:10.3762/bjnano.15.78

• discovered to have exceptional inherent tumor-targeting characteristics without any modification, and it is a fluorophore enabling near-infrared imaging. However, IR780 iodide has low water stability and photostability [23] and shows acute toxicity at high doses [24], which limits its clinical application

• fluorescent dye used to visualize particle location using infrared light [25]. Researchers have also found that F127-folate helps the nanoparticle to penetrate cancer cells through the folate receptor. This makes the treatment work better [12][13][14][34][35][36][37]. Our nanoparticles were also modified with

• and treatment. The term is not new to nanoscience, but it is always preferable to create a drug carrier that serves both goals; that was also the aim of the nanoparticle design in our study. In our study, the imaging agent is the near-infrared fluorescent dye IR780, while the treatment medication is

Facile synthesis of Fe-based metal–organic frameworks from Fe₂O₃ nanoparticles and their application for CO₂/N₂ separation

• Van Nhieu Le,
• Hoai Duc Tran,
• Minh Tien Nguyen,
• Hai Bang Truong,
• Toan Minh Pham and
• Jinsoo Kim

Beilstein J. Nanotechnol. 2024, 15, 897–908, doi:10.3762/bjnano.15.74

• and yield of the as-prepared MIL-100(Fe) materials, including thermogravimetric analysis (TGA), Fourier-transform infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD) measurements, determination of textural properties, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy

• -100Fe@Fe2O3 materials was collected using a field-emission scanning electron microscope Leo-Supra 55 (Carl Zeiss STM, Germany). An attenuated total reflectance (ATR) setup was adopted to record the Fourier-transform infrared (FTIR) spectra of all samples on a Frontier spectrometer (PerkinElmer, USA) in

Electrospun polysuccinimide scaffolds containing different salts as potential wound dressing material

• Veronika Pálos,
• Krisztina S. Nagy,
• Rita Pázmány,
• Krisztina Juriga-Tóth,
• Bálint Budavári,
• Judit Domokos,
• Dóra Szabó,
• Ákos Zsembery and
• Angela Jedlovszky-Hajdu

Beilstein J. Nanotechnol. 2024, 15, 781–796, doi:10.3762/bjnano.15.65

• polymer-based systems (<500 nm). Fourier-transform infrared spectroscopy was applied to verify the presence of salts in the scaffolds and to determine the interaction between the salt and the polymer. Another analysis, energy-dispersive X-ray spectroscopy, was carried out to determine strontium and zinc

• scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), mechanical tests, investigation of salt dissolution from the scaffolds, examination of their antibacterial activity against four different bacterial strains (Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis, and

• , which was placed on a slow rotary drum (10 rpm). The distance between the needle of the syringe and the collector was 15 cm in all cases. The applied voltages (direct current power supply, ES 30 Model, Gamma High Voltage Inc., USA) and flow rates are in Table 1. Fourier-transform infrared spectroscopy

Green synthesis of biomass-derived carbon quantum dots for photocatalytic degradation of methylene blue

• Dalia Chávez-García,
• Mario Guzman,
• Viridiana Sanchez and
• Rubén D. Cadena-Nava

Beilstein J. Nanotechnol. 2024, 15, 755–766, doi:10.3762/bjnano.15.63

• 24 h, CQDs were successfully synthesized. A comprehensive characterization of the CQDs was performed using UV–visible spectroscopy, Fourier-transform infrared spectroscopy, dynamic light scattering, Raman spectroscopy, and luminescence spectroscopy, confirming their high quality. The photocatalytic

• catalytic activity in MB degradation, while those prepared with water as a solvent did not show significant catalytic activity. The samples were also characterized using UV–visible spectra, Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, dynamic light scattering (DLS), and

• length quartz cell was used for the measurements, and deionized water was used as the blank in the measurement to account for background signals. Fourier-transform infrared spectra were measured on a Spectrum Two FT-IR/Sp 10 S/W spectrometer (USA) with a LiTaO3 type detector, the wavelength used ranged