Study of the reusability and stability of nylon nanofibres as an antibody immobilisation surface

• Inés Peraile,
• Matilde Gil-García,
• Laura González-López,
• Nushin A. Dabbagh-Escalante,
• Juan C. Cabria-Ramos and
• Paloma Lorenzo-Lozano

Beilstein J. Nanotechnol. 2024, 15, 83–94, doi:10.3762/bjnano.15.8

• immunocapture system in NF and 96-well microplate, for each time: ***p < 0.001. Field-emission scanning electron microscopy image of NFs. Acknowledgements We would like to thank the whole team at Nieves Murillo of TECNALIA – Industry and Transport Division for providing the nylon NFs. Funding These results

Berberine-loaded polylactic acid nanofiber scaffold as a drug delivery system: The relationship between chemical characteristics, drug-release behavior, and antibacterial efficiency

• Le Thi Le,
• Hue Thi Nguyen,
• Liem Thanh Nguyen,
• Huy Quang Tran and
• Thuy Thi Thu Nguyen

Beilstein J. Nanotechnol. 2024, 15, 71–82, doi:10.3762/bjnano.15.7

• observed by scanning electron microscopy (SEM, Figure 1). The BBR powder appeared as aggregates of rods in the micrometer size (Figure 1a), while BBR NPs were formed as nanoscale rectangles (Figure 1b). The electrospun PLA nanofibers showed bead-free and uniform morphology with fiber diameter in the range

Influence of conductive carbon and MnCo₂O₄ on morphological and electrical properties of hydrogels for electrochemical energy conversion

• Sylwia Pawłowska,
• Karolina Cysewska,
• Yasamin Ziai,
• Jakub Karczewski,
• Piotr Jasiński and
• Sebastian Molin

Beilstein J. Nanotechnol. 2024, 15, 57–70, doi:10.3762/bjnano.15.6

• structures were examined in terms of their morphology, electrical properties, and catalytic layers in the OER process. Results and Discussion Characterisation of hydrogel-based polymer composites with dispersed catalytic and conductive particles Scanning electron microscopy (SEM) analysis of hydrogel samples

• omitted, which is an element that distinguishes the applied procedure from others described in most literature reports. Scanning electron microscopy studies confirmed the fabrication of a composite polymer containing MCO catalyst particles and conductive carbon cCB particles either caught inside or bound

• temperature above LCST results in shrinkage of the hydrogel structure and formation of inhomogeneities. Such a hydrogel ceases to be transparent and loses most of its water [42]. Morphological and physicochemical characterisation Scanning electron microscopy was performed with an FE-SEM FEI Quanta FEG 250 at

Curcumin-loaded nanostructured systems for treatment of leishmaniasis: a review

• Douglas Dourado,
• Thayse Silva Medeiros,
• Éverton do Nascimento Alencar,
• Edijane Matos Sales and
• Fábio Rocha Formiga

Beilstein J. Nanotechnol. 2024, 15, 37–50, doi:10.3762/bjnano.15.4

• when treated by both nanoandi and nanocopa. Moreover, there was a decrease in lesion size and parasite load from the liver and spleen of mice treated with NE. In ultrastructural analysis performed by scanning electron microscopy, it was possible to observe morphological changes, oval aspect, and

Measurements of dichroic bow-tie antenna arrays with integrated cold-electron bolometers using YBCO oscillators

• Leonid S. Revin,
• Dmitry A. Pimanov,
• Alexander V. Chiginev,
• Anton V. Blagodatkin,
• Viktor O. Zbrozhek,
• Andrey V. Samartsev,
• Anastasia N. Orlova,
• Dmitry V. Masterov,
• Alexey E. Parafin,
• Victoria Yu. Safonova,
• Anna V. Gordeeva,
• Andrey L. Pankratov,
• Leonid S. Kuzmin,
• Anatolie S. Sidorenko,
• Silvia Masi and
• Paolo de Bernardis

Beilstein J. Nanotechnol. 2024, 15, 26–36, doi:10.3762/bjnano.15.3

• sensitivity. Scanning electron microscopy (SEM) images of the sample LSPE VB 210/240 SINS1 No. 43 deposited at NNSTU were obtained using an electron microscope at the Collective Use Center of the IPM RAS (Figure 4a,b). The dimensions of the junctions can be precisely measured using SEM and compared with the

TEM sample preparation of lithographically patterned permalloy nanostructures on silicon nitride membranes

• Joshua Williams,
• Michael I. Faley,
• Joseph Vimal Vas,
• Peng-Han Lu and
• Rafal E. Dunin-Borkowski

Beilstein J. Nanotechnol. 2024, 15, 1–12, doi:10.3762/bjnano.15.1

• Abstract We have prepared ferromagnetic nanostructures intended for the investigation of high-frequency magnetization dynamics in permalloy (Py) nanodisks using Lorentz transmission electron microscopy (LTEM) and electron holography. Py nanodisks were fabricated on thin silicon nitride (SiN) membranes

• using three different fabrication methods: lift-off, ion beam etching (IBE), and stencil lithography. They were further analyzed using different instruments, including scanning electron microscopy, LTEM, and electron holography. A bilayer of positive PMMA resist was utilized in the first fabrication

• . Finally, we observed the vortex dynamics of the Py nanodisk under magnetic fields using LTEM and off-axis electron holography. A correlation between preparation methods and the properties of the Py nanostructures was made. Keywords: electron holography; Lorentz transmission electron microscopy; magnetic

Determination of the radii of coated and uncoated silicon AFM sharp tips using a height calibration standard grating and a nonlinear regression function

• Perawat Boonpuek and
• Jonathan R. Felts

Beilstein J. Nanotechnol. 2023, 14, 1200–1207, doi:10.3762/bjnano.14.99

• relation to the PSD were collected to observe the tip blunting behavior. The quantitative determination of the tip radii compared to transmission electron microscopy (TEM) images of the tips showed corresponding results between the blunted tips and the PSD curves, concluding that blunter tips produced a

A combined gas-phase dissociative ionization, dissociative electron attachment and deposition study on the potential FEBID precursor [Au(CH₃)₂Cl]₂

• Elif Bilgilisoy,
• Ali Kamali,
• Thomas Xaver Gentner,
• Gerd Ballmann,
• Sjoerd Harder,
• Hans-Peter Steinrück,
• Hubertus Marbach and
• Oddur Ingólfsson

Beilstein J. Nanotechnol. 2023, 14, 1178–1199, doi:10.3762/bjnano.14.98

• (500 nm)/Si(111) In this experiment, 4 × 4 µm2 FEBID structures were written with [Au(CH3)2Cl]2 as the precursor using an acceleration voltage of 5 keV and a beam current of 1.5 nA. The fabricated structures were examined with scanning electron microscopy (SEM) and Auger electron spectroscopy (AES

• , high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) was performed to analyze the morphology of the deposited nanoparticles. For this purpose, several FEBID structures were prepared on the SiO2 substrate with the size of 4 × 4 µm2 and an electron dose of 7.80 C/cm2. For

Hierarchically patterned polyurethane microgrooves featuring nanopillars or nanoholes for neurite elongation and alignment

• Lester Uy Vinzons,
• Guo-Chung Dong and
• Shu-Ping Lin

Beilstein J. Nanotechnol. 2023, 14, 1157–1168, doi:10.3762/bjnano.14.96

• Supporting Information File 1, Figure S2). Scanning electron microscopy (SEM) images (Figure 1C–E) confirm the featureless surface of flat PU and the ordered arrays of nanopillars and nanoholes on the nanopatterned films. For the PU nanopillar substrate, some short pillars occassionally appeared (Figure 1D

Curcumin-loaded albumin submicron particles with potential as a cancer therapy: an in vitro study

• Nittiya Suwannasom,
• Netsai Sriaksorn,
• Chutamas Thepmalee,
• Krissana Khoothiam,
• Ausanai Prapan,
• Hans Bäumler and
• Chonthida Thephinlap

Beilstein J. Nanotechnol. 2023, 14, 1127–1140, doi:10.3762/bjnano.14.93

• Instruments Ltd., Malvern, UK) at 25 °C. The suspensions of the MPs were diluted to the appropriate concentration with PBS, pH 7.4 (conductivity 18 mS/cm). The size and zeta potential values were expressed as mean ± standard deviation of at least three repeated measurements. Scanning electron microscopy The

Sulfur nanocomposites with insecticidal effect for the control of Bactericera cockerelli

• Lany S. Araujo-Yépez,
• Juan O. Tigrero-Salas,
• Vicente A. Delgado-Rodríguez,
• Vladimir A. Aguirre-Yela and
• Josué N. Villota-Méndez

Beilstein J. Nanotechnol. 2023, 14, 1106–1115, doi:10.3762/bjnano.14.91

• rosemary essential oils with the three concentrations of 0.25%, 0.5%, and 0.75%. The samples were characterized by UV–visible spectroscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and scanning electron microscopy. The insecticidal efficacy of the nanocomposites was evaluated

• eucalyptus and rosemary at different concentrations. Characterizations were carried out through UV–visible spectroscopy, energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM); also the insecticidal efficacy of the NCMPs for the control of

Density functional theory study of Au-fcc/Ge and Au-hcp/Ge interfaces

• Olga Sikora,
• Małgorzata Sternik,
• Benedykt R. Jany,
• Franciszek Krok,
• Przemysław Piekarz and
• Andrzej M. Oleś

Beilstein J. Nanotechnol. 2023, 14, 1093–1105, doi:10.3762/bjnano.14.90

• crystalline phases on a specific substrate [2][3]. The structure of a heterophase can be studied using advanced atomic-resolution experiments, such as high-resolution electron microscopy [4], high-resolution secondary-electron microscopy [5], scanning transmission electron microscopy [6][7] or scanning

• block for the heterostructure. We note that there are two different orientations of this block with respect to the Au-fcc(011) slab shown in Figure 1c. Both arrangements are consistent with electron microscopy pictures as long as the Au and Ge atoms at the interface are not discriminated. In the

• slabs can be partially read from electron microscopy images [23], and the identified gold lattice plane adjacent to the Ge(111) surface is (010), with Ge parallel to the Au-hcp[100] direction. An interface with relatively low strain can be formed with 4 × 3 Au-hcp(010) blocks connected to 3 × 2 Ge(111

Dual-heterodyne Kelvin probe force microscopy

• Benjamin Grévin,
• Fatima Husainy,
• Dmitry Aldakov and
• Cyril Aumaître

Beilstein J. Nanotechnol. 2023, 14, 1068–1084, doi:10.3762/bjnano.14.88

Spatial mapping of photovoltage and light-induced displacement of on-chip coupled piezo/photodiodes by Kelvin probe force microscopy under modulated illumination

• Zeinab Eftekhari,
• Nasim Rezaei,
• Hidde Stokkel,
• Jian-Yao Zheng,
• Andrea Cerreta,
• Ilka Hermes,
• Minh Nguyen,
• Guus Rijnders and
• Rebecca Saive

Beilstein J. Nanotechnol. 2023, 14, 1059–1067, doi:10.3762/bjnano.14.87

• -sectional scanning electron microscopy images can be found in [32]. The top view of the piezo/photodiode device is given in Figure 1a, where the inset represents the cross section of the device stack. Owing to the integration of PZT with silicon processing and operation at low voltages, this device can be

Experimental investigation of usage of POE lubricants with Al₂O₃, graphene or CNT nanoparticles in a refrigeration compressor

• Kayhan Dağıdır and
• Kemal Bilen

Beilstein J. Nanotechnol. 2023, 14, 1041–1058, doi:10.3762/bjnano.14.86

• nanoparticles is presented separately in the subsequent sections to verify the catalog information provided by the manufacturer. In the characterization of the nanoparticles used in the study, field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction

A visible-light photodetector based on heterojunctions between CuO nanoparticles and ZnO nanorods

• Doan Nhat Giang,
• Nhat Minh Nguyen,
• Duc Anh Ngo,
• Thanh Trang Tran,
• Le Thai Duy,
• Cong Khanh Tran,
• Thi Thanh Van Tran,
• Phan Phuong Ha La and
• Vinh Quang Dang

Beilstein J. Nanotechnol. 2023, 14, 1018–1027, doi:10.3762/bjnano.14.84

• and paves the way for developing more stable and effective visible-light photodetectors with remarkable photoresponse and shorter rise and decay times. Results and Discussion The morphologies of pure ZnO NRs and CuO NPs/ZnO NRs were examined via scanning electron microscopy (Figure 1). The field

• -emission scanning electron microscopy (FESEM) image of ZnO NRs exhibits nanorods with hexagonal cross section, well aligned with the glass substrate (Figure 1a). Figure 1b indicates that many spherical nanoparticles are formed on the ZnO NRs after spraying the CuO NP solution with a concentration of 0.05 M

• composition of the materials. The morphology of pure CuO NPs and CuO NPs/ZnO NRs was examined by field-emission scanning electron microscopy. UV–vis absorption spectroscopy showed the optical properties of the materials. The photodetector performance was studied through the current–voltage (I–V

Isolation of cubic Si₃P₄ in the form of nanocrystals

• Polina K. Nikiforova,
• Sergei S. Bubenov,
• Vadim B. Platonov,
• Andrey S. Kumskov,
• Nikolay N. Kononov,
• Tatyana A. Kuznetsova and
• Sergey G. Dorofeev

Beilstein J. Nanotechnol. 2023, 14, 971–979, doi:10.3762/bjnano.14.80

• “WinXPow”. Elemental analysis was carried out on an X-ray fluorescence spectrometer S2 Picofox (Bruker) with total external reflection. Transmission electron microscopy (TEM) samples were dispersed in an ultrasonic bath with hexane and then deposited on copper grids with lacey carbon film (SPI Supplies

• Sciences in part of electron microscopy researches and supported by the Russian Science Foundation (project no. 22-23-00540; https://rscf.ru/en/project/22-23-00540/).

Upscaling the urea method synthesis of CoAl layered double hydroxides

• Camilo Jaramillo-Hernández,
• Víctor Oestreicher,
• Martín Mizrahi and
• Gonzalo Abellán

Beilstein J. Nanotechnol. 2023, 14, 927–938, doi:10.3762/bjnano.14.76

• CoAl-based LDH synthesis through an ARR method had been demonstrated, morphological aspects were addressed by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM) (Figure 4 and Figure 5). For reference x1, well-defined hexagonal single

• electron microscopy (SEM) Scanning electron microscopy data was acquired using a Hitachi S-4800, with a beam energy of 5 keV. The samples on silicon wafers were directly investigated without any surface coating. Energy dispersive X-ray (EDS) spectroscopy studies were performed on a Hitachi S-4800

• Gwyddion software was used for flattening and image correction. Transmission electron microscopy (TEM) Transmission electron microscopy was carried out using a JEOL JEM-1010 at 100 kV accelerating voltage and a Tecnai F20 operated at 200 kV. Images were acquired in bright-field mode with an objective

Green SPIONs as a novel highly selective treatment for leishmaniasis: an in vitro study against Leishmania amazonensis intracellular amastigotes

• Brunno R. F. Verçoza,
• Robson R. Bernardo,
• Luiz Augusto S. de Oliveira and
• Juliany C. F. Rodrigues

Beilstein J. Nanotechnol. 2023, 14, 893–903, doi:10.3762/bjnano.14.73

• The main goal of this work was to evaluate the therapeutic potential of green superparamagnetic iron oxide nanoparticles (SPIONs) produced with coconut water for treating cutaneous leishmaniasis caused by Leishmania amazonensis. Optical and electron microscopy techniques were used to evaluate the

• , scanning electron microscopy and chemical element mapping analysis were carried out to confirm the uptake of the SPIONs by L. amazonensis intracellular amastigotes after removing the plasma membrane to expose the cytoplasmic environment (Figure 2). Secondary electron imaging revealed intracellular

• , arrowheads). The ferrous nature of the observed structures was assessed by chemical element mapping analysis using energy-dispersive X-ray spectroscopy (Figure 2C), confirming that the electron-lucent structures contain iron atoms (Figure 2D). Transmission electron microscopy (TEM) was used to confirm the

N-Heterocyclic carbene-based gold etchants

• Robert B. Chevalier,
• Justin Pantano,
• Matthew K. Kiesewetter and
• Jason R. Dwyer

Beilstein J. Nanotechnol. 2023, 14, 865–871, doi:10.3762/bjnano.14.71

• was already apparent after only 30 min of exposure at a ca. seven times lower concentration in THF in Figure 3c. After 2 h of treatment with this THF-based etchant, electron microscopy revealed no trace of remaining gold film. Halving of the concentration of 1 in THF significantly reduced the degree

• Information File 1. Gold-coated glass slides were purchased from Electron Microscopy Sciences (71892-05, Hatfield, PA, USA). The films were 50 nm of gold deposited by electron beam evaporation onto a 2–7 nm chromium adhesion layer. Slides were cut into ca. 1 × 1 cm2 tokens and immersed in 2 mL of the relevant

Industrial perspectives for personalized microneedles

• Remmi Danae Baker-Sediako,
• Benjamin Richter,
• Matthias Blaicher,
• Michael Thiel and
• Martin Hermatschweiler

Beilstein J. Nanotechnol. 2023, 14, 857–864, doi:10.3762/bjnano.14.70

• with varying heights were printed via two-photon polymerization on a “Quantum X shape” lithography system, and the 10 × 10 microneedle array was printed in 130 min. The scale bar is 1 mm in both images. (A) Scanning electron microscopy image of microcones. (B) Optical microscopy image of transparent

• microcones. Various solid and hollow microneedle designs printed via two-photon polymerization on a “Quantum X shape” lithography system. (A) Scanning electron microscopy image of a 4 × 4 array consisting of both solid and hollow microneedles. The designs were inspired by Mizuno et al. [32] and Cordeiro et

Biomimetics on the micro- and nanoscale – The 25th anniversary of the lotus effect

• Matthias Mail,
• Kerstin Koch,
• Thomas Speck,
• William M. Megill and
• Stanislav N. Gorb

Beilstein J. Nanotechnol. 2023, 14, 850–856, doi:10.3762/bjnano.14.69

• epicuticular wax coverage on leaves of Deschampsia antarctica as a possible adaptation to severe environmental conditions”, used cryo-scanning electron microscopy to study surfaces of D. antarctica, one of the only two flowering plants native to Antarctica. The results show that the two-layered wax, which

• were performed and the mandibles were analysed using (cryo-) scanning electron microscopy, indicating that a fluid substance covers the medial surface of the mandibles reducing propolis adhesion. Weiser et al. [13] take biomimetics into industrial production with their paper “Roll-to-roll fabrication

• Mail, Kerstin Koch, Thomas Speck, William M. Megill and Stanislav N. Gorb Eggenstein-Leopoldshafen, Kleve, Freiburg, and Kiel, July 2023 Biological archetype and eponym of the lotus effect: The sacred lotus (Nelumbo nucifera). a) Photo of a lotus plant. b) Scanning electron microscopy (SEM) image of

Ultralow-energy amorphization of contaminated silicon samples investigated by molecular dynamics

• Grégoire R. N. Defoort-Levkov,
• Alan Bahm and
• Patrick Philipp

Beilstein J. Nanotechnol. 2023, 14, 834–849, doi:10.3762/bjnano.14.68

• substantially more controllable at low energies [10][11], which also makes such beams valid candidates for these processes. Another application includes lamella preparation for transmission electron microscopy (TEM). TEM and scanning electron microscopy (SEM) have high constraints regarding cleanliness [12

A wearable nanoscale heart sound sensor based on P(VDF-TrFE)/ZnO/GR and its application in cardiac disease detection

• Yi Luo,
• Jian Liu,
• Jiachang Zhang,
• Yu Xiao,
• Ying Wu and
• Zhidong Zhao

Beilstein J. Nanotechnol. 2023, 14, 819–833, doi:10.3762/bjnano.14.67

• . Composition and β-phase content of the piezoelectric composite films were analyzed using X-ray diffraction. The morphology of the composite film fibers was observed through scanning electron microscopy. Finally, the P(VDF-TrFE)/ZnO/graphene composite film was encapsulated in a sandwich-structure heart sound

• underwent characterization through electron microscopy, X-ray diffraction (XRD), and piezoelectric performance testing. The results indicated that the piezoelectric film with a composition ratio of 12% P(VDF-TrFE) + 10% ZnO + 0.1% GR exhibited superior performance regarding various aspects. Consequently, in

• utilized to analyze the composition and β-phase content of the composite piezoelectric nanofilms, while scanning electron microscopy (SEM) was employed to observe the morphology of the thin film filaments. Figure 6 displays the XRD patterns of the three composite piezoelectric nanofilms. In the P(VDF-TrFE

Nanostructured lipid carriers containing benznidazole: physicochemical, biopharmaceutical and cellular in vitro studies

• Giuliana Muraca,
• María Esperanza Ruiz,
• Rocío C. Gambaro,
• Sebastián Scioli-Montoto,
• María Laura Sbaraglini,
• Gisel Padula,
• José Sebastián Cisneros,
• Cecilia Yamil Chain,
• Vera A. Álvarez,
• Cristián Huck-Iriart,
• Guillermo R. Castro,
• María Belén Piñero,
• Matias Ildebrando Marchetto,
• Catalina Alba Soto,
• Germán A. Islan and
• Alan Talevi

Beilstein J. Nanotechnol. 2023, 14, 804–818, doi:10.3762/bjnano.14.66

• observed by transmission electron microscopy. Fourier-transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and small-angle X-ray scattering analyses of the nanoparticles indicated that BNZ might be dispersed in the nanoparticle matrix in an amorphous state. The

• different types of nanoparticles and BNZ, including SLN and NLC [21]. The NLC-BNZ formulation was analyzed using transmission electron microscopy (TEM) to confirm the presence of nanoparticles showing a spherical morphology and a narrow distribution of sizes (Figure 1). Image analysis through ImageJ [22

• Fourier-transform infrared spectroscopy Fourier-transform infrared spectroscopy spectra were obtained. The attenuated total reflection mode was used to record the spectra over the range of 400–4000 cm−1 at a resolution of 2 cm−1. Transmission electron microscopy Transmission electron microscopy images