An iridescent film of porous anodic aluminum oxide with alternatingly electrodeposited Cu and SiO₂ nanoparticles

• Menglei Chang,
• Huawen Hu,
• Haiyan Quan,
• Hongyang Wei,
• Zhangyi Xiong,
• Jiacong Lu,
• Pin Luo,
• Yaoheng Liang,
• Jianzhen Ou and
• Dongchu Chen

Beilstein J. Nanotechnol. 2019, 10, 735–745, doi:10.3762/bjnano.10.73

• ]. In comparison with pigment colors, structural colors are much more stable, as a color change can only take place when the physical structure is varied [23]. Two types of strategies have been employed to produce structural colors, one is based on self-assembly methods [24], and the other is based on

• electrodeposition [18]. The former involves the simultaneous assembly of the basic structural units such as molecules, nanomaterials, and the materials on the microscale or even larger scales to form an ordered structure. During the self-assembly process, the basic structural units organize or aggregate, in a

• increase in the effective refractive index and hence reduction of the reflection of the aluminum substrate [25]. The saturation of the structural colors of the metal-deposited AAO composite film was largely enhanced [25][26][27]. An electrostatic self-assembly technique was also employed to produce large

Features and advantages of flexible silicon nanowires for SERS applications

• Hrvoje Gebavi,
• Vlatko Gašparić,
• Dubravko Risović,
• Nikola Baran,
• Paweł Henryk Albrycht and
• Mile Ivanda

Beilstein J. Nanotechnol. 2019, 10, 725–734, doi:10.3762/bjnano.10.72

• . The morphology changes were described by fractal dimension and lacunar analyses and correlated with the duration of Ag plating and SERS measurements. SERS examination showed the optimal intensity values for SiNWs thickness values of 60–100 nm. That is, when the flexibility of the self-assembly SiNWs

The effect of translation on the binding energy for transition-metal porphyrines adsorbed on Ag(111) surface

• Luiza Buimaga-Iarinca and
• Cristian Morari

Beilstein J. Nanotechnol. 2019, 10, 706–717, doi:10.3762/bjnano.10.70

• molecule–surface charge transfer, analyzed for different geometric configurations allows us to propose qualitative models, relevant for the understanding of the self-assembly processes and related phenomena. Keywords: Ag(111) surface; DFT+U; metal porphyrine; van der Waals; Introduction Metalloporphyrins

• multilayer coverage leads to a tilted orientation [27]. At 0.88 ML coverage the presence of ordered structures was distinct with reactive internal coupling occurring at 573 K [30][31]. It is believed that the metal center has typically only little influence on the self-assembly structures formed by TMPPs

• dependence of physical parameters such as binding energy, dipolar moment and charge transfer on the transition-metak atom in the TMPP as well as on the position of the molecule on top of the silver surface. These data will provide a base for deeper understanding of the self-assembly processes involving TMPP

Self-assembly and wetting properties of gold nanorod–CTAB molecules on HOPG

• Imtiaz Ahmad,
• Floor Derkink,
• Tim Boulogne,
• Pantelis Bampoulis,
• Harold J. W. Zandvliet,
• Hidayat Ullah Khan,
• Rahim Jan and
• E. Stefan Kooij

Beilstein J. Nanotechnol. 2019, 10, 696–705, doi:10.3762/bjnano.10.69

• surface. The self-assembled layers of CTAB molecules on the HOPG terraces prior to nanorod deposition were shown to change the wettability of the surface, and as a result, gold nanorod deposition takes place on nonwetting HOPG terraces. Keywords: CTAB; gold nanorods; micelles; self-assembly; wettability

• , the process of self-assembly at the liquid–solid interface has proved to be an attractive self-assembly route [4][8][9]. The self-assembled structures can play an important role in magnetic [10][11][12][13], electronic [14][15][16], photovoltaic [17][18][19], biomedical [20][21][22], sensing [23][24

Ultrathin hydrophobic films based on the metal organic framework UiO-66-COOH(Zr)

• Miguel A. Andrés,
• Clemence Sicard,
• Christian Serre,
• Olivier Roubeau and
• Ignacio Gascón

Beilstein J. Nanotechnol. 2019, 10, 654–665, doi:10.3762/bjnano.10.65

• while conventional Langmuir–Schaefer transfers led to greater particle aggregation above 30 mN·m−1. In addition, conventional glass substrates were functionalized to make them hydrophobic (by previous self-assembly of the hydrophobic silane HMDS) or more hydrophilic (prior transfer of 4 layers of

• supramolecular porous frameworks (NMOF-1) by coordination directed self-assembly of hydrophobic alkyl chains (OPE-C18) with Zn(II) and coated glass substrates using its ethanolic dispersions (thickness of the coating not specified). However, WCA values in most of the previous studies [34][36][48][49][50][51][52

Topochemical engineering of composite hybrid fibers using layered double hydroxides and abietic acid

• Liji Sobhana,
• Lokesh Kesavan,
• Jan Gustafsson and
• Pedro Fardim

Beilstein J. Nanotechnol. 2019, 10, 589–605, doi:10.3762/bjnano.10.60

• stacked in a uniform fashion [17][18][19]. This makes the material employable for charge-directed self-assembly of any molecule of interest on its surface. The metals in this kind of inorganic solids, such as Ni, Mg, Zn, Al, Fe, usually have oxidation states of +2 and +3. The anions in these materials are

• grafted on cellulose at the hydrophilic sites because of its self-assembly on cellulosic –OH groups via hydrogen bonding. Although the cellulosic –OH groups were masked by –OH groups at the bottom planes of LDH, the freely exposed –OH groups at the top planes of LDH maintain the intrinsic hydrophilic

Biomimetic synthesis of Ag-coated glasswing butterfly arrays as ultra-sensitive SERS substrates for efficient trace detection of pesticides

• Guochao Shi,
• Mingli Wang,
• Yanying Zhu,
• Yuhong Wang,
• Xiaoya Yan,
• Xin Sun,
• Haijun Xu and
• Wanli Ma

Beilstein J. Nanotechnol. 2019, 10, 578–588, doi:10.3762/bjnano.10.59

• ]. Likewise, Chamuah et al. employed cleaned diatom frustules as bio-templates for the self-assembly of Au nanoparticles that, when used as a SERS-active substrate, provided a LOD of 1 nM for MG with a relative standard deviation (RSD) value of 7.57% [21]. Pannico and co-workers proved that it was cost

Mechanical and thermodynamic properties of Aβ₄₂, Aβ₄₀, and α-synuclein fibrils: a coarse-grained method to complement experimental studies

• Adolfo B. Poma,
• Horacio V. Guzman,
• Mai Suan Li and
• Panagiotis E. Theodorakis

Beilstein J. Nanotechnol. 2019, 10, 500–513, doi:10.3762/bjnano.10.51

• is very close to the minimum free energy state (native). Here, the number of hydrogen bonds that participate in the deformation as a whole is larger as reported by all-atom simulations [4][5]. In contrast, during in vitro self-assembly of neurodegenerative fibrils the fibrilization process is

• aggregation rate depends on the mechanical stability of the fibrils [27] our study could provide also hints for the self-assembly of β-amyloid and α-synuclein chains. Our results also indicate an elastic anisotropy namely, YT > YL, for all systems. In the case of α-syn fibrils this difference between YT and

Polymorphic self-assembly of pyrazine-based tectons at the solution–solid interface

• Achintya Jana,
• Puneet Mishra and
• Neeladri Das

Beilstein J. Nanotechnol. 2019, 10, 494–499, doi:10.3762/bjnano.10.50

• Achintya Jana Puneet Mishra Neeladri Das Indian Institute of Technology Patna, Bihta, Patna-801106, India Central University of South Bihar, Gaya-824236, India 10.3762/bjnano.10.50 Abstract Exploring the surface self-assembly of small molecules that act as building blocks (tectons) for complex

• supramolecular structures is crucial for realizing surface-supported functional molecular devices. Here, we report on the synthesis and surface self-assembly of a new pyrazine-derived molecule with pyridine pendants. Ambient scanning tunneling microscopy investigation at the solution–solid interface reveals

• polymorphic self-assembly of these molecules on a HOPG substrate. Two different molecular packing structures with equal distribution are observed. Detailed analysis of the STM images emphasizes the crucial role of weak intermolecular hydrogen bonding, and molecule–substrate interactions in the formation of

Site-specific growth of oriented ZnO nanocrystal arrays

• Rekha Bai,
• Dinesh K. Pandya,
• Sujeet Chaudhary,
• Veer Dhaka,
• Vladislav Khayrudinov,
• Jori Lemettinen,
• Christoffer Kauppinen and
• Harri Lipsanen

Beilstein J. Nanotechnol. 2019, 10, 274–280, doi:10.3762/bjnano.10.26

• to their versatile applications [14]. Self-assembled NC arrays collectively can possibly demonstrate new properties, unlike the fixed properties of single NCs, forming new nanostructures with useful functionalities. Semiconductor NC self-assembly depends on the shape and size of the NCs, a broad

Electrostatic force microscopy for the accurate characterization of interphases in nanocomposites

• Diana El Khoury,
• Richard Arinero,
• Jean-Charles Laurentie,
• Mikhaël Bechelany,
• Michel Ramonda and
• Jérôme Castellon

Beilstein J. Nanotechnol. 2018, 9, 2999–3012, doi:10.3762/bjnano.9.279

• dielectric constituents that represent a simplified configuration of the particle–interphase–matrix assembly found in nanodielectrics. Specifically, polystyrene (PS) nanoparticles of 380 nm diameter were prepared by self-assembly on metallized substrates. Then, two shells of variable thicknesses (50 and 100

• ) using the self-assembly property of PS spheres [49][50][51]. In this work, a more precise experimental protocol than the one used in our previous work [28] was chosen to deposit the particles by spin coating [52][53]. The initial PS sphere solution was mixed with ethanol (1:1 ratio) and kept in an

Colloidal chemistry with patchy silica nanoparticles

• Pierre-Etienne Rouet,
• Cyril Chomette,
• Laurent Adumeau,
• Etienne Duguet and
• Serge Ravaine

Beilstein J. Nanotechnol. 2018, 9, 2989–2998, doi:10.3762/bjnano.9.278

• chloride) [15]. Another way to get valence-endowed particles relies on shape recognition. Shape can indeed direct colloidal assembly as it was shown that linear supracolloidal polymers are obtained by self-assembly of cone-shaped particles in the presence of a depletant [16]. Similarly, microparticles with

• -like nanoparticle could lead to multifunctional chiral nanostructures, which may form novel two- or three-dimensional materials with unprecedented properties by self-assembly. Experimental Materials We used styrene (Sigma-Aldrich, 99%), methacryloxymethyltriethoxysilane (MMS, ABCR, 98

Ternary nanocomposites of reduced graphene oxide, polyaniline and hexaniobate: hierarchical architecture and high polaron formation

• Claudio H. B. Silva,
• Maria Iliut,
• Christopher Muryn,
• Christian Berger,
• Zachary Coldrick,
• Vera R. L. Constantino,
• Marcia L. A. Temperini and
• Aravind Vijayaraghavan

Beilstein J. Nanotechnol. 2018, 9, 2936–2946, doi:10.3762/bjnano.9.272

• spectroscopic and cyclic voltammetry/spectroelectrochemical techniques [6]. The inorganic phase induces a secondary doping of the conductor polymer. In another work [7], Raman and EPR spectra also revealed that a PANI/hexNb nanocomposite prepared by the self-assembly approach exhibits a higher conversion of

In situ characterization of nanoscale contaminations adsorbed in air using atomic force microscopy

• Jesús S. Lacasa,
• Lisa Almonte and
• Jaime Colchero

Beilstein J. Nanotechnol. 2018, 9, 2925–2935, doi:10.3762/bjnano.9.271

• contamination; tip cleaning; tip–sample interaction; van der Waals interaction; Introduction Surface science is fundamental to understand many processes in industrial applications, environmental science, biology, medicine and phenomena such as self-assembly [1], friction [2][3] and wetting [4]. In any study

Site-controlled formation of single Si nanocrystals in a buried SiO₂ matrix using ion beam mixing

• Xiaomo Xu,
• Thomas Prüfer,
• Daniel Wolf,
• Hans-Jürgen Engelmann,
• Lothar Bischoff,
• René Hübner,
• Karl-Heinz Heinig,
• Wolfhard Möller,
• Stefan Facsko,
• Johannes von Borany and
• Gregor Hlawacek

Beilstein J. Nanotechnol. 2018, 9, 2883–2892, doi:10.3762/bjnano.9.267

• -filtered transmission electron microscopy is performed to obtain quantitative values on the Si NC size and distribution in dependence of the layer stack geometry, ion fluence and thermal budget. Employing a focused Ne+ beam from a helium ion microscope, we demonstrate site-controlled self-assembly of

• temperature, the diameter of an individual Si NC, 2rNC, has to be smaller than 5.7 nm. The other factors are the unit charge e and ε0 and εr = 3.9 are the vacuum permittivity and the relative permittivity of silicon dioxide, respectively. Recently, advanced lithographic methods [21] and directed self-assembly

• comparable density and NC size, the fluence in the simulation needs to be significantly lower for all investigated cases. This systematic deviation and the underlying physics is subject of an ongoing investigation. In order to optimize the self-assembly of vertically self-aligned Si NCs with a narrow size

Charged particle single nanometre manufacturing

• Philip D. Prewett,
• Cornelis W. Hagen,
• Claudia Lenk,
• Steve Lenk,
• Marcus Kaestner,
• Tzvetan Ivanov,
• Ahmad Ahmad,
• Ivo W. Rangelow,
• Xiaoqing Shi,
• Stuart A. Boden,
• Alex P. G. Robinson,
• Dongxu Yang,
• Sangeetha Hari,
• Marijke Scotuzzi and
• Ejaz Huq

Beilstein J. Nanotechnol. 2018, 9, 2855–2882, doi:10.3762/bjnano.9.266

• structuring techniques are required. Among several candidates, molecular self-assembly and self-organization of structures represent the so-called bottom-up approach. Nanoindentation, thermal scanning probe lithography, local oxidation lithography, dip-pen lithography, extreme UV lithography or X-ray

Enhanced antineoplastic/therapeutic efficacy using 5-fluorouracil-loaded calcium phosphate nanoparticles

• Shanid Mohiyuddin,
• Saba Naqvi and
• Gopinath Packirisamy

Beilstein J. Nanotechnol. 2018, 9, 2499–2515, doi:10.3762/bjnano.9.233

• loading of 5-FU inside the aqueous core, as depicted in Figure 1A. During self-assembly, the aqueous soluble drug (5-FU) along with the CaP precursors formed spheroidal aggregates known as a reverse micellar assembly [22]. The size of the particles can be effectively controlled by altering the water

High-throughput micro-nanostructuring by microdroplet inkjet printing

• Hendrikje R. Neumann and
• Christine Selhuber-Unkel

Beilstein J. Nanotechnol. 2018, 9, 2372–2380, doi:10.3762/bjnano.9.222

• densities is highly important in many fields, ranging from nano-optics to biosensor technologies and biomaterials. A well-established method to fabricate quasi-hexagonal patterns of metal nanoparticles is block copolymer micelle nanolithography, which relies on the self-assembly of metal-loaded micelles on

• spacing between a few tens to several hundreds of nanometers is block copolymer micelle nanolithography (BCML) [8]. This technique is based on the self-assembly of metal-containing micelles on surfaces during dip-coating or spin-coating. BCML is very efficient in coating large areas with nanoparticles in

• assembly of the micelles gives rise to hexagonal micelle patterns. As the self-assembly does not lead to a perfect hexagonal ordering of the micelles, the patterns generated with BCML are often referred to as “quasi-hexagonal” patterns [9]. In our experiments, quasi-hexagonal patterns of gold nanoparticles

Block copolymers for designing nanostructured porous coatings

• Roberto Nisticò

Beilstein J. Nanotechnol. 2018, 9, 2332–2344, doi:10.3762/bjnano.9.218

• thin coatings, one simple route involves the use of self-assembled amphiphilic block copolymers either as the porogen (acting as sacrificial templating agents for the production of inorganic architectures) or as a source of the porogen (by self-assembly for the production of polymeric substrates

• using different synthetic routes to facilitate the incorporation of multiple chemical functionalities into the porous framework or at the pore surface [33]. The self-assembly of block copolymers is an exceptional strategy for inducing well-ordered and regular porosity in polymers [6][32]. Block

• copolymers (BCs) are macromolecules consisting of two (or more) immiscible homopolymer chains covalently linked together. Mesoscale nanostructures can be obtained due to the thermodynamic incompatibility of the blocks, which induce microphase separation via self-assembly, in order to minimize the contact

Lead-free hybrid perovskites for photovoltaics

• Oleksandr Stroyuk

Beilstein J. Nanotechnol. 2018, 9, 2209–2235, doi:10.3762/bjnano.9.207

• CsSnX3 nanorods applied as light harvesters with TiO2/SpiroMeOTAD ETL/HTL combination revealed relatively high PCEs increasing from 9.66% for X = Cl to 10.46% for X = Br to 12.96% for X = I (Table 1), all three devices demonstrating a high Voc of 0.85–0.87 V [72]. A controlled self-assembly phenomenon

Dumbbell gold nanoparticle dimer antennas with advanced optical properties

• Janning F. Herrmann and
• Christiane Höppener

Beilstein J. Nanotechnol. 2018, 9, 2188–2197, doi:10.3762/bjnano.9.205

• , to be well-suited as SERS substrates [54][55]. The high reactivity of CB[n]s with Au surfaces may lead to the uncontrolled formation nanoparticle aggregates in solution, and often prevents a controlled self-assembly into dimers or small oligomer structures. However, using guided assembly by taking

Electrospun one-dimensional nanostructures: a new horizon for gas sensing materials

• Muhammad Imran,
• Nunzio Motta and
• Mahnaz Shafiei

Beilstein J. Nanotechnol. 2018, 9, 2128–2170, doi:10.3762/bjnano.9.202

• applications. This approach shows good potential for applications involving the self-assembly of anisotropic NPs to generate new functional devices [63]. There are two major methods for producing electrospun NP fibers [40]: (i) “indirect synthesis”, that requires some post-processing methods after

• NTs are synthesized using layer-by-layer (LBL) self-assembly of tungsten as well as catalyst precursor on PMMA electrospun nanofibers. Pristine WO3 NTs exhibit a high response (Rgas/Rair) of 63.59 to 5 ppm NO at 350 °C. On the other hand, a high response of 2.24 for the Pt-WO3 NTs and 2.35 for the Pd

Self-assembled quasi-hexagonal arrays of gold nanoparticles with small gaps for surface-enhanced Raman spectroscopy

• Emre Gürdal,
• Simon Dickreuter,
• Fatima Noureddine,
• Pascal Bieschke,
• Dieter P. Kern and
• Monika Fleischer

Beilstein J. Nanotechnol. 2018, 9, 1977–1985, doi:10.3762/bjnano.9.188

• lithography; optical antenna; self-assembly; SERS; Introduction Over the last decades self-assembled layers of gold nanoparticles have taken an important role in emerging nanotechnologies. Noble metal nanoparticles show localized surface plasmon polariton resonances (LSPRs) in the visible and infrared

• enhanced Raman spectroscopy (SERS) [10]. Ordered arrays of such particles can be fabricated by different methods. Electron-beam lithography for example is a top-down method which provides good control, but is time consuming and costly. In contrast, the self-assembly of block-copolymers is a bottom-up

Preparation of micro/nanopatterned gelatins crosslinked with genipin for biocompatible dental implants

• Reika Makita,
• Tsukasa Akasaka,
• Seiichi Tamagawa,
• Yasuhiro Yoshida,
• Saori Miyata,
• Hirofumi Miyaji and
• Tsutomu Sugaya

Beilstein J. Nanotechnol. 2018, 9, 1735–1754, doi:10.3762/bjnano.9.165

• ) [30], coating on patterned substrates [31][32][33], self-assembly of collagen fibers [34], and crosslinking, using glutaraldehyde [35], formaldehyde [36], carbodiimide [37], genipin [38][39], riboflavin [40], transglutaminase [41], silane coupling agents [42], as well as thermal dehydration [43][44

Interaction-tailored organization of large-area colloidal assemblies

• Silvia Rizzato,
• Elisabetta Primiceri,
• Anna Grazia Monteduro,
• Adriano Colombelli,
• Angelo Leo,
• Maria Grazia Manera,
• Roberto Rella and
• Giuseppe Maruccio

Beilstein J. Nanotechnol. 2018, 9, 1582–1593, doi:10.3762/bjnano.9.150

• chopper frequency. The angle between the incident and reflected light beams was set at 30°. Results and Discussion The effect of particle–substrate interactions on colloidal self-assembly was the first aspect that was investigated. For this purpose, the charged polystyrene spheres of smaller diameter were

• . (a) Schematic drawing of the basic steps for the realization of a mask derived from spherical, nanoscale materials by electrostatic self-assembly of nanospheres for the fabrication of (b) nanoholes (c) and nanodisks. SEM plane-view of nanosphere masks obtained by solutions with different salt