Realizing active targeting in cancer nanomedicine with ultrasmall nanoparticles

• André F. Lima,
• Giselle Z. Justo and
• Alioscka A. Sousa

Beilstein J. Nanotechnol. 2024, 15, 1208–1226, doi:10.3762/bjnano.15.98

• , iron oxide, copper sulfide), and rare earth-based usNPs (cerium oxide, gadolinium oxide) [22]. Ultrasmall NPs have dimensions comparable to those of a typical globular protein of 3 to 6 nm in diameter [22][25], although the precise size criteria can vary among researchers. For the purpose of this

Classification and application of metal-based nanoantioxidants in medicine and healthcare

• Nguyen Nhat Nam,
• Nguyen Khoi Song Tran,
• Tan Tai Nguyen,
• Nguyen Ngoc Trai,
• Nguyen Phuong Thuy,
• Hoang Dang Khoa Do,
• Nhu Hoa Thi Tran and
• Kieu The Loan Trinh

Beilstein J. Nanotechnol. 2024, 15, 396–415, doi:10.3762/bjnano.15.36

• % DPPH inhibition and exhibit in vivo hepatoprotective properties in laboratory mice [12]. The combination of copper and cerium in nanoparticle structures enhances antioxidant activity through a synergistic effect. CuCe nanoparticles have been demonstrated for therapeutic effects in ischemic vascular

• employ the properties of transition metals and metal oxides (e.g., cobalt, iron, cerium, and gold), which can generate a cycle of reduction and oxidation stages [20][21][22][23]. Among these metal oxides, cerium oxide-based nanomaterials have been deeply studied with regard to the mechanisms of CAT

• activity. Cerium-based nanomaterials exhibit CAT activity through the ability to decompose H2O2 into O2 and H2O. Cerium oxide consists of mixed valence stages of Ce3+ (reduced) and Ce4+ (fully oxidized), which allows for the generation of redox cycles for exhibiting CAT activity in the presence of H2O2

Measurements of dichroic bow-tie antenna arrays with integrated cold-electron bolometers using YBCO oscillators

• Leonid S. Revin,
• Dmitry A. Pimanov,
• Alexander V. Chiginev,
• Anton V. Blagodatkin,
• Viktor O. Zbrozhek,
• Andrey V. Samartsev,
• Anastasia N. Orlova,
• Dmitry V. Masterov,
• Alexey E. Parafin,
• Victoria Yu. Safonova,
• Anna V. Gordeeva,
• Andrey L. Pankratov,
• Leonid S. Kuzmin,
• Anatolie S. Sidorenko,
• Silvia Masi and
• Paolo de Bernardis

Beilstein J. Nanotechnol. 2024, 15, 26–36, doi:10.3762/bjnano.15.3

• deposition of cerium dioxide CeO2 on the heated substrate as a buffer layer. The dimensions of the obtained Josephson junctions were 50 µm in length and 0.3 µm in thickness. At a temperature T ~ 2.7 K, the value of the critical current density was ~400 kA/cm2 with the ICRN product of ~1.6 mV. The junctions

Carboxylic acids and light interact to affect nanoceria stability and dissolution in acidic aqueous environments

• Matthew L. Hancock,
• Eric A. Grulke and
• Robert A. Yokel

Beilstein J. Nanotechnol. 2023, 14, 762–780, doi:10.3762/bjnano.14.63

• Matthew L. Hancock Eric A. Grulke Robert A. Yokel Chemical and Materials Engineering, University of Kentucky, Lexington, KY 40506-0046, United States Pharmaceutical Sciences, University of Kentucky, Lexington, KY 40536-0596, United States 10.3762/bjnano.14.63 Abstract Cerium atoms on the surfaces

• of nanoceria (i.e., cerium oxide in the form of nanoparticles) can store or release oxygen, cycling between Ce3+ and Ce4+; therefore, they can cause or relieve oxidative stress within living systems. Nanoceria dissolution occurs in acidic environments. Nanoceria stabilization is a known problem even

• dissolution and stabilization have been previously studied in vitro using acidic aqueous environments. Nanoceria agglomerated in the presence of some carboxylic acids over 30 weeks, and degraded in others, at pH 4.5 (i.e., the pH value in phagolysosomes). Plants release carboxylic acids, and cerium

Hydroxyapatite–bioglass nanocomposites: Structural, mechanical, and biological aspects

• Olga Shikimaka,
• Mihaela Bivol,
• Bogdan A. Sava,
• Marius Dumitru,
• Christu Tardei,
• Beatrice G. Sbarcea,
• Daria Grabco,
• Constantin Pyrtsac,
• Daria Topal,
• Andrian Prisacaru,
• Vitalie Cobzac and
• Viorel Nacu

Beilstein J. Nanotechnol. 2022, 13, 1490–1504, doi:10.3762/bjnano.13.123

• by an unconventional wet route followed by melting [31][37][38]. As raw materials, the ultra-purity grade reagents boron oxide (B2O3), magnesium oxide (MgO,) potassium carbonate (K2CO3), phosphoric acid (H3PO4), silicon dioxide (SiO2), zinc oxide (ZnO), and cerium oxide (CeO2) have been used. The

A comprehensive review on electrospun nanohybrid membranes for wastewater treatment

• Senuri Kumarage,
• Imalka Munaweera and
• Nilwala Kottegoda

Beilstein J. Nanotechnol. 2022, 13, 137–159, doi:10.3762/bjnano.13.10

• membrane to remove Pb2+ and Cu2+ ions from aqueous solutions by electrospinning PVP and 3-mercaptopropyltrimethoxysilane (TMPTMS) infused with cerium oxide [62]. Also, they have modified the PVP/CeO2/TMPTMS nanofibers with a surfactant (Pluronic123) to obtain smaller fiber diameters and greater pore volume

Measurement of polarization effects in dual-phase ceria-based oxygen permeation membranes using Kelvin probe force microscopy

• Kerstin Neuhaus,
• Christina Schmidt,
• Liudmila Fischer,
• Wilhelm Albert Meulenberg,
• Ke Ran,
• Joachim Mayer and
• Stefan Baumann

Beilstein J. Nanotechnol. 2021, 12, 1380–1391, doi:10.3762/bjnano.12.102

• microscopy; oxygen permeation; Introduction Acceptor-doped cerium dioxide, where cerium is partially substituted by cations of lower valence (most prominently Gd3+), is a fluorite material with a very high oxide ion conductivity at comparably moderate temperatures (around 600 °C). It has already been in

The preparation temperature influences the physicochemical nature and activity of nanoceria

• Robert A. Yokel,
• Wendel Wohlleben,
• Johannes Georg Keller,
• Matthew L. Hancock,
• Jason M. Unrine,
• D. Allan Butterfield and
• Eric A. Grulke

Beilstein J. Nanotechnol. 2021, 12, 525–540, doi:10.3762/bjnano.12.43

• , University of Kentucky, Lexington, Kentucky, 40506-0046, USA Plant and Soil Sciences, University of Kentucky, Lexington, Kentucky, 40546-0091, USA Chemistry, University of Kentucky, Lexington, Kentucky, 40506-0055, USA 10.3762/bjnano.12.43 Abstract Cerium oxide nanoparticles, so-called nanoceria, are

• . Nanoceria dissolution releases Ce3+ ions, which, with phosphate, form insoluble cerium phosphate in vivo. The addition of immobilized phosphates did not accelerate nanoceria dissolution, suggesting that the Ce3+ ion release during nanoceria dissolution was phosphate-independent. Smaller particles resulting

• treatment of nanoceria can produce significant differences in solubility and surface cerium valence, which affect the biological and catalytic properties of nanoceria. Keywords: cerium; dissolution; nanoparticles; physicochemical properties; valence state; Introduction The long-term fate of engineered

Advanced hybrid nanomaterials

• Andreas Taubert,
• Fabrice Leroux,
• Pierre Rabu and
• Verónica de Zea Bermudez

Beilstein J. Nanotechnol. 2019, 10, 2563–2567, doi:10.3762/bjnano.10.247

• a polymer shell armored with an inorganic layer (cerium oxide nanoparticles). CeO2 nanoparticles act as oxygen scavengers, protecting the organic fluorophore from molecular oxygen. A different approach to luminescent composite films is reported in “Towards rare-earth-free white light-emitting diode

Optimization and performance of nitrogen-doped carbon dots as a color conversion layer for white-LED applications

• Tugrul Guner,
• Hurriyet Yuce,
• Didem Tascioglu,
• Eren Simsek,
• Umut Savaci,
• Aziz Genc,
• Servet Turan and
• Mustafa M. Demir

Beilstein J. Nanotechnol. 2019, 10, 2004–2013, doi:10.3762/bjnano.10.197

• configuration is the combination of a color conversion layer composed of yellow phosphors (e.g., cerium-doped yttrium aluminum garnet (YAG:Ce3+)) with a blue LED chip [33][34][35][36][37]. However, this configuration exhibits a low color rendering index (CRI) due to its red deficiency. Therefore, red phosphors

Green fabrication of lanthanide-doped hydroxide-based phosphors: Y(OH)₃:Eu³⁺ nanoparticles for white light generation

• Tugrul Guner,
• Anilcan Kus,
• Mehmet Ozcan,
• Aziz Genc,
• Hasan Sahin and
• Mustafa M. Demir

Beilstein J. Nanotechnol. 2019, 10, 1200–1210, doi:10.3762/bjnano.10.119

• , cerium-doped yttrium aluminum garnet (YAG:Ce3+) is a well-known yellow phosphor that is employed in an LED package together with a blue LED to create a white light LED (WLED) [14][15][16][17][18][19]. In such a case, the blue light emitted from the blue LED impinges on the phosphor-containing color

• ]. Experimental Materials and methods Yttrium(III) acetate hydrate (Y(Ac)3·xH2O; >99%), europium(III) acetate hydrate (Eu(Ac)3·H2O; >99%), and lithium hydroxide (LiOH; 98%) were purchased from Sigma-Aldrich (St. Louis, MO, USA) and used as-received without any further purification. Cerium-doped yttrium aluminum

A highly efficient porous rod-like Ce-doped ZnO photocatalyst for the degradation of dye contaminants in water

• Binjing Hu,
• Qiang Sun,
• Chengyi Zuo,
• Yunxin Pei,
• Siwei Yang,
• Hui Zheng and
• Fangming Liu

Beilstein J. Nanotechnol. 2019, 10, 1157–1165, doi:10.3762/bjnano.10.115

• pure ZnO achieved a degradation rate of 48.36% whereas 1% Ce/ZnO exhibited the best activity among the as-synthesized products (96.11%). It was found that a moderate amount of cerium doping can significantly improve the photocatalytic activity of ZnO. It was hypothesized that when cerium is mixed with

• doping. The photocatalytic degradation rate follows the order from highest to lowest activity: CZO-4 > CZO-3 > CZO-2 > CZO-1 > CZO-5 > ZnO. The main reason Ce doping can act to enhance photocatalytic activity can possibly be attributed to the presence of cerium ions in the ZnO lattice, whose 4f energy

• exhibits a superior catalytic performance to pristine ZnO. The change of morphology also contributes to the improvement of the photocatalytic performance of CZO, which will be further discussed in a later section. However, a further increase in the cerium concentration acts to lower the photocatalytic

Scavenging of reactive oxygen species by phenolic compound-modified maghemite nanoparticles

• Małgorzata Świętek,
• Yi-Chin Lu,
• Rafał Konefał,
• Liliana P. Ferreira,
• M. Margarida Cruz,
• Yunn-Hwa Ma and
• Daniel Horák

Beilstein J. Nanotechnol. 2019, 10, 1073–1088, doi:10.3762/bjnano.10.108

• , phenolic compounds with a higher number of hydroxy groups have enhanced ROS scavenging capability. In addition to low-molecular-weight phenolic compounds of natural origin, some inorganic nanoparticles also have antioxidant properties, e.g., zinc, cerium, magnesium oxide, magnetite, and silver [6][7][8][9

Tungsten disulfide-based nanocomposites for photothermal therapy

• Tzuriel Levin,
• Hagit Sade,
• Rina Ben-Shabbat Binyamini,
• Maayan Pour,
• Iftach Nachman and
• Jean-Paul Lellouche

Beilstein J. Nanotechnol. 2019, 10, 811–822, doi:10.3762/bjnano.10.81

• -step functionality. This ability is demonstrated here with two polymers grafted onto the nanocomposite surface, and other functionalities could be additional cancer therapy agents for achieving increased therapeutic activity. Keywords: cerium complex; magnetic nanoparticles; photothermal therapy

• chalcophylic metal ions (nickel, iron, ruthenium) and leaving parts of the ion coordination sites free for docking to the chalcogen layer. The molecular structure of both NTA and TerPy enables performing versatile chemistry on the ligand. Cerium is a metal of the lanthanide series with versatile coordinative

• chemistry, thanks to an available valence electron in its 4f orbital. In our group, cerium was utilized in the complex form of ceric ammonium nitrate [(NH4)2Ce(IV)(NO3)6, or CAN]. In CAN the cerium ion is coordinated with six nitrate ligands through their oxygen atoms. CAN is a strong oxidizer, turning

Ceria/polymer nanocontainers for high-performance encapsulation of fluorophores

• Kartheek Katta,
• Dmitry Busko,
• Yuri Avlasevich,
• Katharina Landfester,
• Stanislav Baluschev and
• Rafael Muñoz-Espí

Beilstein J. Nanotechnol. 2019, 10, 522–530, doi:10.3762/bjnano.10.53

• an inorganic layer and a liquid core containing a fluorophore. The polymeric capsules are synthesized by free radical miniemulsion polymerization and contain covalently bound carboxylate surface functionalities that allow for the binding of metal ions through electrostatic interaction. A cerium(IV

• an increase in the fluorescence of the model organic fluorophore terrylene diimide by avoiding the ground-state molecular oxygen to react with electronically excited states of the fluorescent hydrocarbon molecule. Keywords: cerium oxide; crystallization; miniemulsion; nanocapsule; photoluminescence

• group [10][12]. The regular arrangement of functional groups on the nanocapsule surface can provide nucleation and structure-directing centers for the controlled crystallization of metal-oxide particles. We have chosen cerium(IV) oxide nanoparticles to be deposited on the nanocapsule surface in order to

Cryochemical synthesis of ultrasmall, highly crystalline, nanostructured metal oxides and salts

• Elena A. Trusova and
• Nikolai S. Trutnev

Beilstein J. Nanotechnol. 2018, 9, 1755–1763, doi:10.3762/bjnano.9.166

• , including a modified sol–gel synthesis of the colloids and their cryogenic processing, was used in the synthesis of nickel, iron and cerium oxide nanopowders. In this case, cerium, iron and nickel nitrates were used as metal sources for the synthesis of metal-containing sols. The sol synthesis was carried

Light extraction efficiency enhancement of flip-chip blue light-emitting diodes by anodic aluminum oxide

• Yi-Ru Huang,
• Yao-Ching Chiu,
• Kuan-Chieh Huang,
• Shao-Ying Ting,
• Po-Jui Chiang,
• Chih-Ming Lai,
• Chun-Ping Jen,
• Snow H. Tseng and
• Hsiang-Chen Wang

Beilstein J. Nanotechnol. 2018, 9, 1602–1612, doi:10.3762/bjnano.9.152

• dislocations in the LED structure were blocked, thus enhancing the general luminous efficiency by approximately 23% [15]. Cates et al. adopted laser etching to produce a repeated microstructure on the emitting surface of a yttrium aluminum perovskite scintillation crystal activated by cerium (formula YAlO3:Ce

Enzymatically promoted release of organic molecules linked to magnetic nanoparticles

• Chiara Lambruschini,
• Silvia Villa,
• Luca Banfi,
• Fabio Canepa,
• Fabio Morana,
• Annalisa Relini,
• Paola Riani,
• Renata Riva and
• Fulvio Silvetti

Beilstein J. Nanotechnol. 2018, 9, 986–999, doi:10.3762/bjnano.9.92

• chromatography (TLC) glass plates and visualized by ultraviolet light (UV, 254 nm and 365 nm), or stained with cerium ammonium molybdate (CAM, Hanessian’s stain) or with ninhydrin or with concentrated HBr followed by ninhydrin. Chromatographic purification was performed as flash chromatography on 40–63 μm silica

Effect of annealing treatments on CeO₂ grown on TiN and Si substrates by atomic layer deposition

• Silvia Vangelista,
• Rossella Piagge,
• Satu Ek and
• Alessio Lamperti

Beilstein J. Nanotechnol. 2018, 9, 890–899, doi:10.3762/bjnano.9.83

• deposition process. This result is interpreted in the light of the contributions of different energy components (surface energy and elastic modulus) which act dependently on the substrate properties, such as its nature and structure. Keywords: atomic layer deposition; cerium(IV) oxide (CeO2) microstructure

• ; in situ annealing; transmission electron microscopy; X-ray diffraction; Introduction Cerium dioxide (CeO2) has raised renewed interest in the recent years in many fields of research thanks to its properties, such as the ability to store and release oxygen, or its chemical stability [1][2]. For many

• permittivity (κ) of 23–24 [5]. In all the cases, the valence of the Ce ions is fundamental, since it determines some of the material specific ability, such as the oxygen storage. More generally, the structure of cerium oxide is essential in defining its specific capabilities [6]. At the thermodynamic

A review of carbon-based and non-carbon-based catalyst supports for the selective catalytic reduction of nitric oxide

• Shahreen Binti Izwan Anthonysamy,
• Syahidah Binti Afandi,
• Mehrnoush Khavarian and
• Abdul Rahman Bin Mohamed

Beilstein J. Nanotechnol. 2018, 9, 740–761, doi:10.3762/bjnano.9.68

• interaction and oxide–oxide interactions that are unreachable otherwise [38]. Xiong et al. [39] prepared magnetic iron–cerium–tungsten mixed oxide pellets using a citric acid sol–gel process assisted by microwave irradiation for the SCR-NH3 of NO. They found that the dispersion of both cerium oxide and

PTFE-based microreactor system for the continuous synthesis of full-visible-spectrum emitting cesium lead halide perovskite nanocrystals

• Chengxi Zhang,
• Weiling Luan,
• Yuhang Yin and
• Fuqian Yang

Beilstein J. Nanotechnol. 2017, 8, 2521–2529, doi:10.3762/bjnano.8.252

• . [22] prepared cerium lead halide perovskite QDs with a tunable emission peak in the range of 360–700 nm via a non-injection or heating-up method, and the QY of the prepared QDs reached 87%. However, the quality of the QDs synthesized by these methods strongly depends on the concentration gradient

Fabrication of CeO₂–MO_x (M = Cu, Co, Ni) composite yolk–shell nanospheres with enhanced catalytic properties for CO oxidation

• Ling Liu,
• Jingjing Shi,
• Hongxia Cao,
• Ruiyu Wang and
• Ziwu Liu

Beilstein J. Nanotechnol. 2017, 8, 2425–2437, doi:10.3762/bjnano.8.241

• obtained material showed a high catalytic activity for CO oxidation [16][22]. In addition, porous/hollow CeO2-based composite oxides with high surface area can be prepared through heat treatment of suitable cerium-containing precursors. Typically, uniform porous Ce1−xZnxO2−δ solid-solution nanodisks were

• synthesized by thermal decomposition of the as-prepared Ce–Zn precursor and exhibited excellent activity for removing CO [17]. CeO2–ZnO composite hollow microspheres were fabricated via annealing of a precursor of amorphous zinc–cerium citrate hollow microspheres and presented excellent catalytic activity in

• activities. For instance, ZnCo2O4@CeO2 core@shell spheres [14] and Co3O4@CeO2 core@shell cubes [26] with tunable CeO2 shell thickness were prepared by a facile self-assembly method and exhibited promising performance in the catalytic oxidation of CO. Consequently, a suitable choice of templates or cerium

In situ formation of reduced graphene oxide structures in ceria by combined sol–gel and solvothermal processing

• Jingxia Yang,
• Johannes Ofner,
• Bernhard Lendl and
• Ulrich Schubert

Beilstein J. Nanotechnol. 2016, 7, 1815–1821, doi:10.3762/bjnano.7.174

• solvothermal treatment in ethanol. The appearance of such structures is closely related to cerium tert-butoxide as precursor and ethanol as solvothermal solvent. The rGO-like residues improve the catalytic CO oxidation activity. This was also confirmed by introduction of “external” graphene oxide during sol

• -synthesized ceria particles followed by reduction to reduced graphene oxide (rGO) [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16]. In a previous study, we have synthesized CeO2 [17] from cerium tert-butoxide by combined sol–gel and solvothermal processing. The kind of post-synthesis treatment of the

• observed in the Raman spectra (Supporting Information File 1, Figure S1) when (1) H2O was used instead of EtOH for solvothermal treatment or (2) cerium ammonium nitrate (NH4)2[Ce(NO3)6] was used as precursor instead of cerium tert-butoxide (identical preparation conditions in all cases). We did not check

High performance Ce-doped ZnO nanorods for sunlight-driven photocatalysis

• Bilel Chouchene,
• Tahar Ben Chaabane,
• Lavinia Balan,
• Emilien Girot,
• Kevin Mozet,
• Ghouti Medjahdi and
• Raphaël Schneider

Beilstein J. Nanotechnol. 2016, 7, 1338–1349, doi:10.3762/bjnano.7.125

• significant attention, especially with cerium. Ce3+ possesses shielded 4f levels, which allow various well-defined narrow optical transitions between the spin-orbit levels and thus split the bandgap of ZnO into sub-gaps. For this reason, Ce3+ is generally doped or associated to ZnO to improve the luminescence

Unraveling the neurotoxicity of titanium dioxide nanoparticles: focusing on molecular mechanisms

• Bin Song,
• Yanli Zhang,
• Jia Liu,
• Xiaoli Feng,
• Ting Zhou and
• Longquan Shao

Beilstein J. Nanotechnol. 2016, 7, 645–654, doi:10.3762/bjnano.7.57

• (MRC-5), concomitant with excessive MDA production [67]. After lung epithelial cancer cells (A549) were exposed to iron oxide nanoparticles, ROS production, mitochondrial impairments and autophagy were detected [68]. Autophagy in human peripheral blood monocytes can be induced by cerium dioxide