Local work function on graphene nanoribbons

• Daniel Rothhardt,
• Amina Kimouche,
• Tillmann Klamroth and
• Regina Hoffmann-Vogel

Beilstein J. Nanotechnol. 2024, 15, 1125–1131, doi:10.3762/bjnano.15.91

• is, by the local electrochemical potential. GNRs show strong electrostatic effects at their edges [11], where electrostatic forces occur that we expect to modulate the electrons’ local electrochemical potential. Additionally, the chemical state of GNR edges allows one to substantially tune the

Rapid fabrication of MgO@g-C₃N₄ heterojunctions for photocatalytic nitric oxide removal

• Minh-Thuan Pham,
• Duyen P. H. Tran,
• Xuan-Thanh Bui and
• Sheng-Jie You

Beilstein J. Nanotechnol. 2022, 13, 1141–1154, doi:10.3762/bjnano.13.96

• observe in Figure 7c,d. However, the shape of MgO is complicated to determine by TEM and HR-TEM (Figure 7a,b). These results prove the presence of MgO in the compound. Chemical state analysis XPS and HR-XPS have been employed to determine the chemical states of the materials. XPS survey scans of g-C3N4

Investigation of a memory effect in a Au/(Ti–Cu)Ox-gradient thin film/TiAlV structure

• Damian Wojcieszak,
• Jarosław Domaradzki,
• Michał Mazur,
• Tomasz Kotwica and
• Danuta Kaczmarek

Beilstein J. Nanotechnol. 2022, 13, 265–273, doi:10.3762/bjnano.13.21

• also investigated to show the gradient distribution of Ti and Cu as a function of the thin film depth. X-ray photoelectron spectroscopy (XPS) studies were performed to determine the chemical state of titanium and copper on the surface of the mixed oxide thin films. A Specs XR-50 X-ray non-monochromatic

Self-standing heterostructured NiC_x-NiFe-NC/biochar as a highly efficient cathode for lithium–oxygen batteries

• Shengyu Jing,
• Xu Gong,
• Shan Ji,
• Linhui Jia,
• Bruno G. Pollet,
• Sheng Yan and
• Huagen Liang

Beilstein J. Nanotechnol. 2020, 11, 1809–1821, doi:10.3762/bjnano.11.163

• were evenly distributed in the selected area. In other words, N-doped carbon was formed as a support material. The images also show that Fe and Ni uniformly covered the entire particles, forming Fe and Ni alloy particles. To gain further information on the chemical state and element composition on the

Nickel nanoparticles supported on a covalent triazine framework as electrocatalyst for oxygen evolution reaction and oxygen reduction reactions

• Secil Öztürk,
• Yu-Xuan Xiao,
• Dennis Dietrich,
• Beatriz Giesen,
• Juri Barthel,
• Jie Ying,
• Xiao-Yu Yang and
• Christoph Janiak

Beilstein J. Nanotechnol. 2020, 11, 770–781, doi:10.3762/bjnano.11.62

• the activity of the CTF-1-600. X-ray photoelectron spectroscopy (XPS) provides information about the chemical composition and chemical state of elements. The Ni 2p and N 1s spectra of the materials are shown in Figure 5 and Figure S15–S18, Supporting Information File 1. The Ni 2p spectrum of Ni/CTF-1

Effect of Ag loading position on the photocatalytic performance of TiO₂ nanocolumn arrays

• Jinghan Xu,
• Yanqi Liu and
• Yan Zhao

Beilstein J. Nanotechnol. 2020, 11, 717–728, doi:10.3762/bjnano.11.59

• , which corresponds to the (004) crystal of Ag surface. From the comprehensive TEM results, the silver-loaded TiO2 array is composed of Ag particles and TiO2 with anatase configuration. Next, sample AFT3 was subjected to XPS analysis to characterize the elemental composition and chemical state of the Ag

Improved adsorption and degradation performance by S-doping of (001)-TiO₂

• Xiao-Yu Sun,
• Xian Zhang,
• Xiao Sun,
• Ni-Xian Qian,
• Min Wang and
• Yong-Qing Ma

Beilstein J. Nanotechnol. 2019, 10, 2116–2127, doi:10.3762/bjnano.10.206

• increase in the amount of •OH and •O2− radicals. Keywords: anatase; chemical state; degradation; photocatalytic properties; S-doping; thermal chemical vapor deposition; titanium dioxide (TiO2); Introduction Anatase TiO2 with a tetragonal symmetry has widely been used for the degradation of organic

• . Conclusion S-doped (001)-TiO2 with different RS/Ti were synthesized by thermal chemical vapor deposition at 180 and 250 °C and systematically characterized by XRD, TEM, FTIR, XPS, UV–vis DRS, PL, BET and ESR. The S-doped sample produced at 180 °C shows little changes in the structure, morphology, chemical

• state and photocatalytic properties of undoped TiO2, indicating that the temperature is not high enough to effectively achieve S-doping. The effects of S-doping at 250 °C are as follows: (1) S-doping induces a crystal lattice distortion, and the ratio of the lattice parameters c/a varies with the RS/Ti

Hierarchically structured 3D carbon nanotube electrodes for electrocatalytic applications

• Pei Wang,
• Katarzyna Kulp and
• Michael Bron

Beilstein J. Nanotechnol. 2019, 10, 1475–1487, doi:10.3762/bjnano.10.146

• geometry, carbon precursors, gas flow rate and composition of gas mixtures, as well as the catalyst support and physical and chemical state of the catalyst [59][60][61][62][63]. It is not the aim of this paper to present a detailed study on the influence of all these parameters. However, some of them

Selective gas detection using Mn₃O₄/WO₃ composites as a sensing layer

• Yongjiao Sun,
• Zhichao Yu,
• Wenda Wang,
• Pengwei Li,
• Gang Li,
• Wendong Zhang,
• Lin Chen,
• Serge Zhuivkov and
• Jie Hu

Beilstein J. Nanotechnol. 2019, 10, 1423–1433, doi:10.3762/bjnano.10.140

• transmission electron microscope (TEM) a JEM-2100F was utilized to study the morphology and crystallographic features of the products. X-ray photoelectron spectroscope (XPS) was obtained on an ESCALAB 250Xi device for the analysis of the chemical state of the elements in the samples and the C 1s signal at

BiOCl/TiO₂/diatomite composites with enhanced visible-light photocatalytic activity for the degradation of rhodamine B

• Minlin Ao,
• Kun Liu,
• Xuekun Tang,
• Zishun Li,
• Qian Peng and
• Jing Huang

Beilstein J. Nanotechnol. 2019, 10, 1412–1422, doi:10.3762/bjnano.10.139

• indicates that BiOCl and TiO2 are mainly dispersed on the surface of diatomite, but not in the pores. The larger pore volume will be beneficial to the enrichment and degradation of dyes, thus showing a higher catalytic performance [33]. The surface chemical state of BTD was characterized by XPS. The survey

• spectrum (Figure 3a) clearly shows the signals of Ti, O, Cl, Bi and Si. The two peaks corresponding to 159.35 and 164.65 eV belong to Bi 4f7/2 and Bi 4f5/2 respectively in the Bi 4f spectrum [34] (Figure 3b), indicating that Bi3+ is the main chemical state of Bi in the composites. In the Si 2p spectrum

Porous N- and S-doped carbon–carbon composite electrodes by soft-templating for redox flow batteries

• Maike Schnucklake,
• László Eifert,
• Jonathan Schneider,
• Roswitha Zeis and
• Christina Roth

Beilstein J. Nanotechnol. 2019, 10, 1131–1139, doi:10.3762/bjnano.10.113

• hydrogen content. The average of the measured values was determined and listed in Table 2. The elemental composition and the chemical state of the elements in the sample surfaces were determined by X-ray photoelectron spectroscopy (XPS) measurements (CLAM4 electron analyzer from Thermo VG scientific

Structural and optical properties of penicillamine-protected gold nanocluster fractions separated by sequential size-selective fractionation

• Xiupei Yang,
• Zhengli Yang,
• Fenglin Tang,
• Jing Xu,
• Maoxue Zhang and
• Martin M. F. Choi

Beilstein J. Nanotechnol. 2019, 10, 955–966, doi:10.3762/bjnano.10.96

• size and the ratio of Au atoms to ligands of AuNCs. X-ray photoelectron spectroscopy (XPS) has also been applied to observe the molecular dependence on the gold and sulfur chemical state of organosulfur monolayers of the fractions. The photoluminescence spectra of these AuNCs in the range of 900–790 nm

Biocompatible organic–inorganic hybrid materials based on nucleobases and titanium developed by molecular layer deposition

• Leva Momtazi,
• Henrik H. Sønsteby and
• Ola Nilsen

Beilstein J. Nanotechnol. 2019, 10, 399–411, doi:10.3762/bjnano.10.39

• containing thymine or titanium oxide. Overall, a more in-depth investigation of the structure of the Ti-thymine films should be performed. No sign of crystallinity was observed for Ti-adenine and Ti-uracil by AFM or XRD. We used XPS as a qualitative investigation of the chemical state in the thin films prior

A Ni(OH)₂ nanopetals network for high-performance supercapacitors synthesized by immersing Ni nanofoam in water

• Donghui Zheng,
• Man Li,
• Yongyan Li,
• Chunling Qin,
• Yichao Wang and
• Zhifeng Wang

Beilstein J. Nanotechnol. 2019, 10, 281–293, doi:10.3762/bjnano.10.27

• changes in chemical state of the elements, XPS measurements are performed for the as-spun, as-dealloyed, and as-synthesized Ni(OH)2 specimens. Figure 4a shows that the XPS spectra over a wide energy region exhibit the main peaks of Zr 3d, Ti 2p, O 1s, and C 1s for the as-spun Ni-Zr-Ti alloy, while large

A visible-light-controlled platform for prolonged drug release based on Ag-doped TiO₂ nanotubes with a hydrophobic layer

• Caihong Liang,
• Jiang Wen and
• Xiaoming Liao

Beilstein J. Nanotechnol. 2018, 9, 1793–1801, doi:10.3762/bjnano.9.170

• + and the NDM hydrophobic layer was verified by SEM and EDS; the results are shown in Figure 3. Furthermore, X-ray photoelectron spectroscopy (XPS) was employed to analyze the chemical state of the coating layer of Ag-TNTs and Zn-Ag-TNTs shown in Figure 4. Figure 3a,b clearly demonstrates that some

• Zn mainly exists in form of ZnO, which is consistent with the results of Zhang [29] and Wang [30]. Figure 4c and Figure 4g show the high-resolution O 1s spectra. As it can be seen, the asymmetrical peak shape indicates the chemical state of O in samples is more than one state, which is deconvoluted

Toward the use of CVD-grown MoS₂ nanosheets as field-emission source

• Geetanjali Deokar,
• Nitul S. Rajput,
• Junjie Li,
• Francis Leonard Deepak,
• Wei Ou-Yang,
• Nicolas Reckinger,
• Carla Bittencourt,
• Jean-Francois Colomer and
• Mustapha Jouiad

Beilstein J. Nanotechnol. 2018, 9, 1686–1694, doi:10.3762/bjnano.9.160

• indicates the presence of more than three layers of MoS2 [23]. The chemical state of the as-grown samples was investigated by XPS. The Mo 3d, S 2p and O 1s high-resolution core-level spectrum fits are presented in Figure 2b,c. The corresponding data analysis results are given in Table S1 (Supporting

Effect of annealing treatments on CeO₂ grown on TiN and Si substrates by atomic layer deposition

• Silvia Vangelista,
• Rossella Piagge,
• Satu Ek and
• Alessio Lamperti

Beilstein J. Nanotechnol. 2018, 9, 890–899, doi:10.3762/bjnano.9.83

• beam (25 keV, 2.6 pA) for analysis over a 50 μm × 50 μm area centered on the sputtered crater and therein collecting secondary negative ions [27]. The recorded intensities of the secondary ions were normalized to the intensity of 30Si in bulk Si. The chemical state of the annealed CeO2 films [28] was

Facile synthesis of a ZnO–BiOI p–n nano-heterojunction with excellent visible-light photocatalytic activity

• Mengyuan Zhang,
• Jiaqian Qin,
• Pengfei Yu,
• Bing Zhang,
• Mingzhen Ma,
• Xinyu Zhang and
• Riping Liu

Beilstein J. Nanotechnol. 2018, 9, 789–800, doi:10.3762/bjnano.9.72

• , which is significantly improved from the pure BiOI (5.23 cm2/g) and ZnO (16 cm2/g) materials. This may lead ZnO/BiOI to have more active bonding sites than pure BiOI and ZnO, which is beneficial for the photodegradation activity. Chemical state analysis X-ray photoelectron spectroscopy (XPS) was carried

• out for the chemical composition and valence state analysis of various species. The foreign impurity C at 284.6 eV is used to calibrate peak positions in all the XPS results. High-resolution narrow-scan spectra of O, Bi, Zn and I are also conducted for the study of surface chemical state in detail

• and B-6 samples. They are characteristics of Zn 2p1/2 at 1043 eV and Zn 2p3/2 at 1020 eV ascribed to the Zn2+ state [47]. In the Zn 2p core level of B-4, a pair of satellite peaks are observed with binding energy of 1045.65 and 1022.65 eV, which are probably caused by the change of chemical state of

A review of carbon-based and non-carbon-based catalyst supports for the selective catalytic reduction of nitric oxide

• Shahreen Binti Izwan Anthonysamy,
• Syahidah Binti Afandi,
• Mehrnoush Khavarian and
• Abdul Rahman Bin Mohamed

Beilstein J. Nanotechnol. 2018, 9, 740–761, doi:10.3762/bjnano.9.68

Sugarcane juice derived carbon dot–graphitic carbon nitride composites for bisphenol A degradation under sunlight irradiation

• Lan Ching Sim,
• Jing Lin Wong,
• Chen Hong Hak,
• Jun Yan Tai,
• Kah Hon Leong and
• Pichiah Saravanan

Beilstein J. Nanotechnol. 2018, 9, 353–363, doi:10.3762/bjnano.9.35

• and it was concluded that CDs are favorable for the separation of charge carriers, but the increasing concentration of CDs could lead to inefficiency of charge separation [46]. X-ray photoelectron spectroscopy (XPS) analysis The XPS spectra in Figure 4a–c reveal the surface composition and chemical

• state of CD/g-C3N4(0.5). From the C 1s spectrum of CD/g-C3N4(0.5) in Figure 4a, the signals at 284.4 eV and 288.7 eV are found to correspond to graphitic carbon (C–C) and sp2 carbon (N–C=N) [70]. Compared with the C 1s spectrum of pure g-C3N4, three new signals were detected at 284.8 eV (sp2 C–C), 285.4

BN/Ag hybrid nanomaterials with petal-like surfaces as catalysts and antibacterial agents

• Konstantin L. Firestein,
• Denis V. Leybo,
• Alexander E. Steinman,
• Andrey M. Kovalskii,
• Andrei T. Matveev,
• Anton M. Manakhov,
• Irina V. Sukhorukova,
• Pavel V. Slukin,
• Nadezda K. Fursova,
• Sergey G. Ignatov,
• Dmitri V. Golberg and
• Dmitry V. Shtansky

Beilstein J. Nanotechnol. 2018, 9, 250–261, doi:10.3762/bjnano.9.27

• and gas permeability. IR spectroscopy In order to trace the chemical state of the BN/Ag NH surfaces, the samples before and after catalytic activity tests were characterized by IR spectroscopy. The results are presented in Figure 6. Both types of the pristine BN/Ag HNMs are characterized by the two

CdSe nanorod/TiO₂ nanoparticle heterojunctions with enhanced solar- and visible-light photocatalytic activity

• Fakher Laatar,
• Hatem Moussa,
• Halima Alem,
• Lavinia Balan,
• Emilien Girot,
• Ghouti Medjahdi,
• Hatem Ezzaouia and
• Raphaël Schneider

Beilstein J. Nanotechnol. 2017, 8, 2741–2752, doi:10.3762/bjnano.8.273

• NRs can be transferred to TiO2 nanoparticles due to the heterojunction between these materials (Figure 4c). This should contribute to enhance the photocatalytic activity of CdSe/TiO2 composites under visible light irradiation (vide infra). The chemical state of the elements composing the CdSe (2 wt

Patterning of supported gold monolayers via chemical lift-off lithography

• Liane S. Slaughter,
• Kevin M. Cheung,
• Sami Kaappa,
• Huan H. Cao,
• Qing Yang,
• Thomas D. Young,
• Andrew C. Serino,
• Sami Malola,
• Jana M. Olson,
• Stephan Link,
• Hannu Häkkinen,
• Anne M. Andrews and
• Paul S. Weiss

Beilstein J. Nanotechnol. 2017, 8, 2648–2661, doi:10.3762/bjnano.8.265

• from a Au substrate than a monolayer of propanethiolates. In addition to previously demonstrated lift-off “compatible” and “incompatible” terminal groups [10][11], the head groups and backbones of the SAM molecules themselves are potential parameters for customizing the composition and chemical state

Ta₂N₃ nanocrystals grown in Al₂O₃ thin layers

• Krešimir Salamon,
• Maja Buljan,
• Iva Šarić,
• Mladen Petravić and
• Sigrid Bernstorff

Beilstein J. Nanotechnol. 2017, 8, 2162–2170, doi:10.3762/bjnano.8.215

• chemical state of Ta is then determined from the area of corresponding fitting curves, normalized to the total area of the Ta 4f peak. In that way, we found that the fraction of Ta–N bonds in ML4m and ML12m is 33% and 30%, respectively, while the corresponding fractions for the Ta–O bonds are 41% and 44

Effect of the fluorination technique on the surface-fluorination patterning of double-walled carbon nanotubes

• Lyubov G. Bulusheva,
• Yuliya V. Fedoseeva,
• Emmanuel Flahaut,
• Jérémy Rio,
• Christopher P. Ewels,
• Victor O. Koroteev,
• Gregory Van Lier,
• Denis V. Vyalikh and
• Alexander V. Okotrub

Beilstein J. Nanotechnol. 2017, 8, 1688–1698, doi:10.3762/bjnano.8.169

• splitting of ropes especially during sonication in a solution [24], which was done for the preparation of TEM specimens. The higher degree of splitting achieved for the F2-fluorinated DWCNTs may testify a higher fluorination yield of this technique. XPS C 1s spectra detected changes in the chemical state of