Enhancing mechanical properties of chitosan/PVA electrospun nanofibers: a comprehensive review

• Nur Areisman Mohd Salleh,
• Amalina Muhammad Afifi,
• Fathiah Mohamed Zuki and
• Hanna Sofia SalehHudin

Beilstein J. Nanotechnol. 2025, 16, 286–307, doi:10.3762/bjnano.16.22

• particles, fibers, and whiskers [166][167][168]. Chitosan/PVA/nanoclay composite nanofibers were successfully prepared by electrospinning. Chitosan and PVA solutions were prepared and mixed in a 30:70 volume ratio. Montmorillonite nanoclay was then dispersed in acetic acid and mixed with the chitosan/PVA

• to 4.6 MPa. This significant improvement in Young’s modulus and tensile strength was attributed to the formation of a cross-linked network within the PVA/CS composite nanofibers, which restricted the movement of molecular chains [179]. Another study on electrospun PVA nanofibers used heat treatment

Batch preparation of nanofibers containing nanoparticles by an electrospinning device with multiple air inlets

• Dong Wei,
• Chengwei Ye,
• Adnan Ahmed and
• Lan Xu

Beilstein J. Nanotechnol. 2023, 14, 141–150, doi:10.3762/bjnano.14.15

• nanofibers in batches. It was found that the distribution of ZnO nanoparticles in the composite nanofibers obtained by EMAI was more uniform than that by SSFSE. This was because the air flow through multiple pores enabled the ZnO nanoparticles in the spinning solution to maintain uniform dispersion in the

A comprehensive review on electrospun nanohybrid membranes for wastewater treatment

• Senuri Kumarage,
• Imalka Munaweera and
• Nilwala Kottegoda

Beilstein J. Nanotechnol. 2022, 13, 137–159, doi:10.3762/bjnano.13.10

Structure and electrochemical performance of electrospun-ordered porous carbon/graphene composite nanofibers

• Yi Wang,
• Yanhua Song,
• Chengwei Ye and
• Lan Xu

Beilstein J. Nanotechnol. 2020, 11, 1280–1290, doi:10.3762/bjnano.11.112

• Yi Wang Yanhua Song Chengwei Ye Lan Xu National Engineering Laboratory for Modern Silk, College of Textile and Engineering, Soochow University, 199 Ren-ai Road, Suzhou 215123, China 10.3762/bjnano.11.112 Abstract Ordered carbon/graphene composite nanofibers (CGCNFs) with different porous

• surface area of CGCNFs, thereby significantly increasing their specific capacitance. In addition, the ordering of CGCNFs within the electrode improved the electron transfer efficiency, resulting in a higher specific capacitance. Keywords: carbon/graphene composite nanofibers; carbonization

• ]. Generally, the structures of nanocomposites used in electrochemical supercapacitors can influence their capacitance, charge and discharge rates, as well as their cycle stability. In our previous work [33], the ordered porous PAN/graphene composite nanofibers (OPPGCNFs) were prepared by a modified parallel

Preparation, characterization and photocatalytic performance of heterostructured CuO–ZnO-loaded composite nanofiber membranes

• Wei Fang,
• Liang Yu and
• Lan Xu

Beilstein J. Nanotechnol. 2020, 11, 631–650, doi:10.3762/bjnano.11.50

• Wei Fang Liang Yu Lan Xu National Engineering Laboratory for Modern Silk, College of Textile and Engineering, Soochow University, 199 Ren-ai Road, Suzhou 215123, China 10.3762/bjnano.11.50 Abstract Inorganic semiconductor oxides loaded on composite nanofibers (CNFs) have been widely applied in

• three times, and the degradation rate remained above 90%. Keywords: electrospinning; composite nanofibers; heterostructured CuO–ZnO; hydrothermal synthesis; photocatalysis; semiconductor oxide; Introduction Water remediation is one of the main scientific research subjects regarding environmental

• , electrical, mechanical and chemical properties, which might result in applications in photocatalysis [26]. Electrospinning is a simple and convenient method for preparing composite nanofibers (CNFs) [27][28][29][30][31]. CNFs have been widely applied as carrier material due to their outstanding

Graphene-enhanced metal oxide gas sensors at room temperature: a review

• Dongjin Sun,
• Yifan Luo,
• Marc Debliquy and
• Chao Zhang

Beilstein J. Nanotechnol. 2018, 9, 2832–2844, doi:10.3762/bjnano.9.264

• electrons transferred from graphene to Co3O4 through the Co–O–C bonds lead to an additional increase of the width of hole accumulation layers, leading to a high sensitivity at room temperature. In another work, Feng et al. [92] developed composite nanofibers of rGO-coated Co3O4 nanocrystals by using

Electrospun one-dimensional nanostructures: a new horizon for gas sensing materials

• Muhammad Imran,
• Nunzio Motta and
• Mahnaz Shafiei

Beilstein J. Nanotechnol. 2018, 9, 2128–2170, doi:10.3762/bjnano.9.202

Fabrication of hierarchically porous TiO₂ nanofibers by microemulsion electrospinning and their application as anode material for lithium-ion batteries

• Jin Zhang,
• Yibing Cai,
• Xuebin Hou,
• Xiaofei Song,
• Pengfei Lv,
• Huimin Zhou and
• Qufu Wei

Beilstein J. Nanotechnol. 2017, 8, 1297–1306, doi:10.3762/bjnano.8.131

• et al. reported the fabrication of hierarchical TiO2 nanorods via ME-ES and the application as photoanode material for dye-sensitized solar cells [25]. According to Shi et al., highly porous SnO2/TiO2 composite nanofibers were prepared successfully by ME-ES and subsequent calcination [28]. There are

Ammonia gas sensors based on In₂O₃/PANI hetero-nanofibers operating at room temperature

• Qingxin Nie,
• Zengyuan Pang,
• Hangyi Lu,
• Yibing Cai and
• Qufu Wei

Beilstein J. Nanotechnol. 2016, 7, 1312–1321, doi:10.3762/bjnano.7.122

• Qingxin Nie Zengyuan Pang Hangyi Lu Yibing Cai Qufu Wei Key Laboratory of Eco-Textiles, Ministry of Education, Jiangnan University, 214122 Wuxi, Jiangsu, China 10.3762/bjnano.7.122 Abstract Indium nitrate/polyvinyl pyrrolidone (In(NO3)3/PVP) composite nanofibers were synthesized via

• electrospinning, and then hollow structure indium oxide (In2O3) nanofibers were obtained through calcination with PVP as template material. In situ polymerization was used to prepare indium oxide/polyaniline (In2O3/PANI) composite nanofibers with different mass ratios of In2O3 to aniline. The structure and

• morphology of In(NO3)3/PVP, In2O3/PANI composite nanofibers and pure PANI were investigated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and current–voltage (I–V) measurements. The gas sensing properties

Improved lithium-ion battery anode capacity with a network of easily fabricated spindle-like carbon nanofibers

• Mengting Liu,
• Wenhe Xie,
• Lili Gu,
• Tianfeng Qin,
• Xiaoyi Hou and
• Deyan He

Beilstein J. Nanotechnol. 2016, 7, 1289–1295, doi:10.3762/bjnano.7.120

• combing pompon-like MnO nanocrystallites with carbon nanotube scaffolds [12]. Wang et al. and Zhao et al. claimed that the electrospun MnO–C composite nanofibers preformed high reversible capacities of 663 and 1082 mAh g−1, respectively, at a current density of 0.1 A g−1 [5][13]. On the whole, hybridizing

Tunable white light emission by variation of composition and defects of electrospun Al₂O₃–SiO₂ nanofibers

• Jinyuan Zhou,
• Gengzhi Sun,
• Hao Zhao,
• Xiaojun Pan,
• Zhenxing Zhang,
• Yujun Fu,
• Yanzhe Mao and
• Erqing Xie

Beilstein J. Nanotechnol. 2015, 6, 313–320, doi:10.3762/bjnano.6.29

• Avenue, 639798, Singapore 10.3762/bjnano.6.29 Abstract Composite nanofibers consisting of Al2O3–SiO2 were prepared by electrospinning in combination with post-calcination in air. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were used to investigate the

• crystalline phase and microstructure of the composite nanofibers. Photoluminescence experiments indicated that the resulting white light emission can be tuned by the relative intensity of the individual spectral components, which are related to the individual defects such as: violet-blue emission from O

• . Thus, it is important and instructive to further explore the preparation and PL properties of these environmentally friendly, Al2O3–SiO2 nanomaterials. In this work, Al2O3–SiO2 composite nanofibers with different Al/(Al–Si) ratios were prepared by electrospinning in combination with calcination in air

Electrospinning preparation and electrical and biological properties of ferrocene/poly(vinylpyrrolidone) composite nanofibers

• Ji-Hong Chai and
• Qing-Sheng Wu

Beilstein J. Nanotechnol. 2013, 4, 189–197, doi:10.3762/bjnano.4.19

• compatibility, and excellent dissolvability in most organic solvents [16]. In this work, PVP polymer was selected as the carrier for immobilizing ferrocene. By incorporating Fc in PVP, the composite nanofibers would have enhanced wettability due to the presence of PVP. Additionally, the presence of well

• is facile and a complex procedure is not involved in this work, the properties are not as good as reported for other materials. However, this work has provided us with a promising antibacterial and electrochemical sensing platform based on Fc/PVP composite nanofibers. Experimental Materials Poly

• ) Fc/PVP nanofibers. TGA thermograms of (a) Fc powder; (b) blank PVP nanofibers; (c) Fc/PVP fibers. SEM images of Fc/PVP composite nanofibers from various solvent types of (a) pure ethanol; (b) ethanol/chloroform (v/v 1.3:1); (c) ethanol/DMF (v/v 11:9). The total PVP concentration is 10 wt % and the Fc