Various CVD-grown ZnO nanostructures for nanodevices and interdisciplinary applications

• The-Long Phan,
• Le Viet Cuong,
• Vu Dinh Lam and
• Ngoc Toan Dang

Beilstein J. Nanotechnol. 2024, 15, 1390–1399, doi:10.3762/bjnano.15.112

• comparison to other compounds [4][5][6]. Specifically, its large bandgap energy Eg ≈ 3.4 eV is comparable to GaN – a typical material for blue-light-emitting diode (LED) technology [7][8]. Also, its exciton binding energy is higher than the thermal energy at 300 K, and it has high-quality optical

Ultrasensitive and ultrastretchable metal crack strain sensor based on helical polydimethylsiloxane

• Shangbi Chen,
• Dewen Liu,
• Weiwei Chen,
• Huajiang Chen,
• Jiawei Li and
• Jinfang Wang

Beilstein J. Nanotechnol. 2024, 15, 270–278, doi:10.3762/bjnano.15.25

• and a light-emitting diode (LED). When a tensile strain is applied, the light emitted by the LED is modulated by the strain sensor. The LED rapidly switched off when the sensor surpassed the critical strain threshold of the target. The switch-off of the LED could serve as an alarm signal, and the

Hierarchically patterned polyurethane microgrooves featuring nanopillars or nanoholes for neurite elongation and alignment

• Lester Uy Vinzons,
• Guo-Chung Dong and
• Shu-Ping Lin

Beilstein J. Nanotechnol. 2023, 14, 1157–1168, doi:10.3762/bjnano.14.96

• ]. Therefore, there is still a need to develop simple and cost-effective fabrication methods applicable to a wide range of nano- and micropatterns and biomaterials. In our previous studies, we have shown how nanosphere lens lithography (NLL) can be used with a low-cost ultraviolet light-emitting diode (UV-LED

From a free electron gas to confined states: A mixed island of PTCDA and copper phthalocyanine on Ag(111)

• Alfred J. Weymouth,
• Emily Roche and
• Franz J. Giessibl

Beilstein J. Nanotechnol. 2022, 13, 1572–1577, doi:10.3762/bjnano.13.131

• Information File 1. A natural complement to PTCDA is copper phthalocyanine (CuPc) for several reasons: First, CuPc and PTCDA together can form an organic light-emitting diode with PTCDA as the acceptor [14]. Second, CuPc [15] and PTCDA both lie flat on metal surfaces at submonolayer coverage, enabling high

Assessment of the optical and electrical properties of light-emitting diodes containing carbon-based nanostructures and plasmonic nanoparticles: a review

• Keshav Nagpal,
• Erwan Rauwel,
• Frédérique Ducroquet and
• Protima Rauwel

Beilstein J. Nanotechnol. 2021, 12, 1078–1092, doi:10.3762/bjnano.12.80

• in the EML of blue light-emitting diode [107]. A very high improvement in the current efficiency compared to the device without Ag nanocubes was noted. Shi et al. in a report, have introduced AuNP in the MgZnO QD layer with a device structure of p-NiO/CsPbBr3/MgZnO/AuNP/n-ZnO film/n-GaN (Figure 9b

Nanogenerator-based self-powered sensors for data collection

• Yicheng Shao,
• Maoliang Shen,
• Yuankai Zhou,
• Xin Cui,
• Lijie Li and
• Yan Zhang

Beilstein J. Nanotechnol. 2021, 12, 680–693, doi:10.3762/bjnano.12.54

• . Lee et al. proposed a based Hg2+ ion sensor based on ZnO nanowires and carbon nanotubes for detecting toxic pollutants [17]. The ZnO nanowire (NW) array acted as power source. When Hg2+ ions were detected, the system powered a light-emitting diode (LED). Li et al. designed a self-powered heavy metal

The influence of an interfacial hBN layer on the fluorescence of an organic molecule

• Christine Brülke,
• Oliver Bauer and
• Moritz M. Sokolowski

Beilstein J. Nanotechnol. 2020, 11, 1663–1684, doi:10.3762/bjnano.11.149

• directly on metal substrates by chemical vapor deposition [2]. This is, for example, exploited when a 2DM interfacial layer is inserted between the metallic electrode and a functional organic layer of an organic electronic device, such as an organic light emitting diode [3]. The purpose of the interfacial

Walking energy harvesting and self-powered tracking system based on triboelectric nanogenerators

• Mingliang Yao,
• Guangzhong Xie,
• Qichen Gong and
• Yuanjie Su

Beilstein J. Nanotechnol. 2020, 11, 1590–1595, doi:10.3762/bjnano.11.141

• are able to continuously light up 110 light-emitting diode bulbs. In addition, a self-powered location-tracking system was prepared for pedestrian volume counting and passenger tracing with the purpose of reducing energy consumption in public areas. The proposed walking energy harvesting device is

• between. The undulated electrode serves as a spacer and also as an induction electrode for energy collection. Triggered by the steps of human walking, the open-circuit voltage and short-circuit current reach values up to 86 V and 6.2 μA, respectively, which is sufficient to light up 110 light-emitting

• diode (LED) bulbs. In addition, by integrating the u-TENGs with six electrode channels, a self-powered location-tracking system was developed. This walking energy harvesting device is flexible, durable, and feasible, regardless of the time of the day, season, climate, and weather, which makes it an

A few-layer graphene/chlorin e6 hybrid nanomaterial and its application in photodynamic therapy against Candida albicans

• Selene Acosta,
• Carlos Moreno-Aguilar,
• Dania Hernández-Sánchez,
• Beatriz Morales-Cruzado,
• Erick Sarmiento-Gomez,
• Carla Bittencourt,
• Luis Octavio Sánchez-Vargas and
• Mildred Quintana

Beilstein J. Nanotechnol. 2020, 11, 1054–1061, doi:10.3762/bjnano.11.90

• -Ce6) for the photodynamic treatment (PDT) of Candida albicans. We show that the FLG-Ce6 hybrid nanomaterial displays enhanced reactive oxygen species (ROS) generation compared with Ce6. The enhancement is up to 5-fold when irradiated for 15 min at 632 nm with a red light-emitting diode (LED). The

• materials as candidates for photosensitizers in PDT [31][32]. An FLG and Ce6 hybrid nanomaterial (FLG-Ce6) was used as the photosensitizer in combination with a red light-emitting diode (LED) array as the photoactivation light source. The conjugated system of graphene π-electrons improves the performance of

Influence of the epitaxial composition on N-face GaN KOH etch kinetics determined by ICP-OES

• Markus Tautz,
• Maren T. Kuchenbrod,
• Joachim Hertkorn,
• Robert Weinberger,
• Martin Welzel,
• Arno Pfitzner and
• David Díaz Díaz

Beilstein J. Nanotechnol. 2020, 11, 41–50, doi:10.3762/bjnano.11.4

• progress in small time increments with high precision. Thereby, the disadvantages of other techniques such as determination of weight loss or height difference were overcome, achieving high accuracy and reproducibility. Keywords: etching; GaN; ICP-OES; KOH; LED; Introduction The light emitting diode (LED

Advanced hybrid nanomaterials

• Andreas Taubert,
• Fabrice Leroux,
• Pierre Rabu and
• Verónica de Zea Bermudez

Beilstein J. Nanotechnol. 2019, 10, 2563–2567, doi:10.3762/bjnano.10.247

• a polymer shell armored with an inorganic layer (cerium oxide nanoparticles). CeO2 nanoparticles act as oxygen scavengers, protecting the organic fluorophore from molecular oxygen. A different approach to luminescent composite films is reported in “Towards rare-earth-free white light-emitting diode

Green fabrication of lanthanide-doped hydroxide-based phosphors: Y(OH)₃:Eu³⁺ nanoparticles for white light generation

• Tugrul Guner,
• Anilcan Kus,
• Mehmet Ozcan,
• Aziz Genc,
• Hasan Sahin and
• Mustafa M. Demir

Beilstein J. Nanotechnol. 2019, 10, 1200–1210, doi:10.3762/bjnano.10.119

• efficient technologies [1][2][3][4][5]. Today, light-emitting diode (LED)-based white light generation plays a role in both academic and industrial applications. To obtain white light through LED-based configurations, either all three primary colors (red–green–blue (RGB)) can be integrated individually via

Towards rare-earth-free white light-emitting diode devices based on the combination of dicyanomethylene and pyranine as organic dyes supported on zinc single-layered hydroxide

• Jeff L. Nyalosaso,
• Rachod Boonsin,
• Pierre Vialat,
• Damien Boyer,
• Geneviève Chadeyron,
• Rachid Mahiou and
• Fabrice Leroux

Beilstein J. Nanotechnol. 2019, 10, 760–770, doi:10.3762/bjnano.10.75

• -emitting diode (LED); pyranine; zinc hydroxyacetate; Introduction Light-emitting diode (LED) devices are the most developed lighting systems today. 95% of LEDs found on the market generate white light by combining the blue light of a semiconductor diode (GaN or InGaN) with the broad yellow emission of the

• stacked upon each other and placed above a blue LED lead to white-light emission with suitable photometric parameters for applications in lighting or display devices: colour temperature of 5409 K and colour rendering index (CRI) of 81. Keywords: dicyanomethylene (DCM); hybrid luminescent films; light

Optimization of the optical coupling in nanowire-based integrated photonic platforms by FDTD simulation

• Nan Guan,
• Andrey Babichev,
• Martin Foldyna,
• Dmitry Denisov,
• François H. Julien and
• Maria Tchernycheva

Beilstein J. Nanotechnol. 2018, 9, 2248–2254, doi:10.3762/bjnano.9.209

• emitting diode (LED) and a nanowire photodetector connected with a waveguide is proposed. The light coupling efficiency from the LED to the detector is optimized as a function of the geometrical parameters of the system using the finite difference time domain simulation tool Lumerical. Starting from a

• , Russia LPICM-CNRS, Ecole Polytechnique, Université Paris-Saclay, 91128 Palaiseau, France, Saint Petersburg Electrotechnical University "LETI", ul. Professora Popova 5, 197376 Saint Petersburg, Russia 10.3762/bjnano.9.209 Abstract The optimized design of a photonic platform based on a nanowire light

A visible-light-controlled platform for prolonged drug release based on Ag-doped TiO₂ nanotubes with a hydrophobic layer

• Caihong Liang,
• Jiang Wen and
• Xiaoming Liao

Beilstein J. Nanotechnol. 2018, 9, 1793–1801, doi:10.3762/bjnano.9.170

• yellow fluorescent light-emitting diode (LED) lamp irradiation (λ > 450 nm). Subsequently, the treated TNTs arrays were soaked in 70 mL 0.1 M Zn(AC)2 solution and then the samples were treated by hydrothermal reaction in 0.1 M Zn(Ac)2 solution for 3 h at 200 °C to fabricate the Zn-loaded Ag-TNTs, which

• (3.5 h, 7.5 h, 12 h, 36 h, 96 h, 192 h and 408 h) and 5 mL of fresh PBS was added to compensate for the solution. The samples were collected periodically for up to 17 days. During the whole process, half of tubes with NDM and half without NDM were irradiated by a yellow fluorescent light-emitting diode

Light extraction efficiency enhancement of flip-chip blue light-emitting diodes by anodic aluminum oxide

• Yi-Ru Huang,
• Yao-Ching Chiu,
• Kuan-Chieh Huang,
• Shao-Ying Ting,
• Po-Jui Chiang,
• Chih-Ming Lai,
• Chun-Ping Jen,
• Snow H. Tseng and
• Hsiang-Chen Wang

Beilstein J. Nanotechnol. 2018, 9, 1602–1612, doi:10.3762/bjnano.9.152

• emitter into a surface plasmon mode produced by AAO. Keywords: anodic aluminum oxide; critical angle of total reflection; efficiency enhancement; flip-chip blue light-emitting diode; Introduction Light-emitting diodes (LEDs) are widely used in various fields, such as optical communication and automobile

Electro-optical interfacial effects on a graphene/π-conjugated organic semiconductor hybrid system

• Karolline A. S. Araujo,
• Luiz A. Cury,
• Matheus J. S. Matos,
• Thales F. D. Fernandes,
• Luiz G. Cançado and
• Bernardo R. A. Neves

Beilstein J. Nanotechnol. 2018, 9, 963–974, doi:10.3762/bjnano.9.90

• electrostatic force microscopy (EFM) [65][66] and scanning Kelvin probe microscopy (SKPM) [67] experiments were carried out using a white light emitting diode (LED) source. ScanAsyst – Air (bare Si tip), HQ:NSC18/Cr-Au (Au-coated tip) and HQ:CSC37-CrAu (Au-coated tip) cantilevers from Bruker and MikroMasch were

Optical orientation of nematic liquid crystal droplets via photoisomerization of an azodendrimer dopant

• Sergey A. Shvetsov,
• Alexander V. Emelyanenko,
• Natalia I. Boiko,
• Alexander S. Zolot'ko,
• Yan-Song Zhang,
• Jui-Hsiang Liu and
• Alexei R. Khokhlov

Beilstein J. Nanotechnol. 2018, 9, 870–879, doi:10.3762/bjnano.9.81

• droplet surface as the undoped NLC (Figure 2a). The director distribution of NLC droplets is determined by planar surface conditions in glycerol. Thus, the presence of polymer additive does not disturb the orientational structure of the droplets in the absence of light-emitting diode (LED) illumination

• ) are shown by dashed lines. Adapted from [30], with the permission of AIP Publishing. POM images of NLC droplet structures in the bulk of glycerol obtained at light-emitting diode irradiation with wavelengths of (a) 448 nm, (b) 398 nm and (c) 365 nm. The arrows show the direction of transitions. The

• double arrows show the directions of the crossed polarizers. POM images of NLC droplet structures in contact with the solid substrate obtained under light-emitting diode irradiation with wavelengths of (a) 448 nm, (b) 398 nm and (c) 365 nm. The arrows show the direction of transitions. The double arrows

Valley-selective directional emission from a transition-metal dichalcogenide monolayer mediated by a plasmonic nanoantenna

• Haitao Chen,
• Mingkai Liu,
• Lei Xu and
• Dragomir N. Neshev

Beilstein J. Nanotechnol. 2018, 9, 780–788, doi:10.3762/bjnano.9.71

• polarization states of the pump beam. It can be envisioned that the dynamic excitation and control of carriers in different valleys is crucial for future valley-based information technologies and applications. Inspired by such opportunities, a valley-based light emitting diode with controllable emission

High-stress study of bioinspired multifunctional PEDOT:PSS/nanoclay nanocomposites using AFM, SEM and numerical simulation

• Alfredo J. Diaz,
• Hanaul Noh,
• Tobias Meier and
• Santiago D. Solares

Beilstein J. Nanotechnol. 2017, 8, 2069–2082, doi:10.3762/bjnano.8.207

• interfaces have received special attention as an integral component in organic photovoltaics and organic light-emitting diode systems. Developing a transparent pressure-responsive nanocomposite has potential application within touchscreen displays. To synthesize a transparent nanocomposite coating, the

Two-dimensional carbon-based nanocomposites for photocatalytic energy generation and environmental remediation applications

• Suneel Kumar,
• Ashish Kumar,
• Ashish Bahuguna,
• Vipul Sharma and
• Venkata Krishnan

Beilstein J. Nanotechnol. 2017, 8, 1571–1600, doi:10.3762/bjnano.8.159

Parylene C as a versatile dielectric material for organic field-effect transistors

• Tomasz Marszalek,
• Maciej Gazicki-Lipman and
• Jacek Ulanski

Beilstein J. Nanotechnol. 2017, 8, 1532–1545, doi:10.3762/bjnano.8.155

• organic light-emitting diode (OLED) (10−6 g/m2 per day) [23]. Nevertheless, some of the organic semiconductors (mostly electron-transporting materials) require an encapsulation layer, in order to observe charge transport in the transistor architecture [24]. According to our knowledge, there is a limited

Light-induced magnetoresistance in solution-processed planar hybrid devices measured under ambient conditions

• Sreetama Banerjee,
• Daniel Bülz,
• Danny Reuter,
• Karla Hiller,
• Dietrich R. T. Zahn and
• Georgeta Salvan

Beilstein J. Nanotechnol. 2017, 8, 1502–1507, doi:10.3762/bjnano.8.150

• photoswitching, I–V characteristics and magnetoresistance measurements was performed immediately after the sample preparation. The total measurement time was about 1 h. The schematic diagram of the experimental set-up is shown in Figure 1. The entire sample surface was illuminated with a white light emitting

• diode (LED), with an emission ranging from 400 to 700 nm for the measurements of the photocurrent and of the magnetoresistance. The measurements were performed at room temperature (ca. 25 °C) and the ambient humidity was maintained at (20 ± 5)%. The electrical measurements were conducted using a

NO gas sensing at room temperature using single titanium oxide nanodot sensors created by atomic force microscopy nanolithography

• Li-Yang Hong and
• Heh-Nan Lin

Beilstein J. Nanotechnol. 2016, 7, 1044–1051, doi:10.3762/bjnano.7.97

• current of the sensor at a bias voltage of 10 or 5 V was recorded. A UV light-emitting diode (310 nm at 0.3 mW·cm−2) was placed above the sensor for UV-assisted sensing. Two sensing modes were applied. For the first, called UV-activation mode, the sensor was under constant UV illumination through the

Charge injection and transport properties of an organic light-emitting diode

• Peter Juhasz,
• Juraj Nevrela,
• Michal Micjan,
• Miroslav Novota,
• Jan Uhrik,
• Lubica Stuchlikova,
• Jan Jakabovic,
• Ladislav Harmatha and
• Martin Weis

Beilstein J. Nanotechnol. 2016, 7, 47–52, doi:10.3762/bjnano.7.5

• Peter Juhasz Juraj Nevrela Michal Micjan Miroslav Novota Jan Uhrik Lubica Stuchlikova Jan Jakabovic Ladislav Harmatha Martin Weis Slovak University of Technology, Ilkovicova 3, Bratislava 81219, Slovakia 10.3762/bjnano.7.5 Abstract The charge behavior of organic light emitting diode (OLED) is