Electrospun nanofibers: building blocks for the repair of bone tissue

• Tuğrul Mert Serim,
• Gülin Amasya,
• Tuğba Eren-Böncü,
• Ceyda Tuba Şengel-Türk and
• Ayşe Nurten Özdemir

Beilstein J. Nanotechnol. 2024, 15, 941–953, doi:10.3762/bjnano.15.77

• complications are a major challenge in the field of orthopedics. In order to both trigger the bone healing process and provide mechanical support to the damaged bone, synthetic scaffolds with nanofibrous structure have been investigated recently. Polymeric nanofibers are nanostructured systems that can also be

Curcumin-loaded nanostructured systems for treatment of leishmaniasis: a review

• Douglas Dourado,
• Thayse Silva Medeiros,
• Éverton do Nascimento Alencar,
• Edijane Matos Sales and
• Fábio Rocha Formiga

Beilstein J. Nanotechnol. 2024, 15, 37–50, doi:10.3762/bjnano.15.4

• , approaches such as carrying curc in nanostructures have been used to overcome such drawbacks. Nanostructured systems for the treatment of leishmaniasis The existing treatments for leishmaniasis (cutaneous, mucocutaneous, or visceral) are still insufficient or frequently ineffective. This is due to several

• by macrophages, promoting an increase in antileishmanial efficacy, a decrease of toxicity, and, as a result, an increase in the selectivity index of these compounds. The same rationale is applied to the incorporation of curc in nanostructured systems, which will be discussed in the following topics

• . Nanostructured systems with curcumin for the treatment of leishmaniasis Different nanostructured systems with curc intended for the treatment of leishmaniasis have been developed (Figure 3). The articles included in this work approach the following nanosystems: (i) self-nanoemulsifying drug-delivery systems

Effects of focused electron beam irradiation parameters on direct nanostructure formation on Ag surfaces

• Jānis Sniķeris,
• Vjačeslavs Gerbreders,
• Andrejs Bulanovs and
• Ēriks Sļedevskis

Beilstein J. Nanotechnol. 2022, 13, 1004–1010, doi:10.3762/bjnano.13.87

• to EB-induced carbonization. However, changing the position of the EB along the oscillator did not affect their resonance frequency, which should be the case if carbonization was happening locally. There is a potential for carbon and carbon-metal based nanostructured systems to be used in different

Use of nanosystems to improve the anticancer effects of curcumin

• Andrea M. Araya-Sibaja,
• Norma J. Salazar-López,
• Krissia Wilhelm Romero,
• José R. Vega-Baudrit,
• J. Abraham Domínguez-Avila,
• Carlos A. Velázquez Contreras,
• Ramón E. Robles-Zepeda,
• Mirtha Navarro-Hoyos and
• Gustavo A. González-Aguilar

Beilstein J. Nanotechnol. 2021, 12, 1047–1062, doi:10.3762/bjnano.12.78

• bioavailability, and fast elimination of the molecule [13][20][21]. Thus, research has been focused on incorporating CUR into nanosystems, potentially maintaining or improving its effects on biological systems. The present work reviews the use of CUR-based conventional nanostructured systems used to improve CUR

Mapping the local dielectric constant of a biological nanostructured system

• Wescley Walison Valeriano,
• Rodrigo Ribeiro Andrade,
• Juan Pablo Vasco,
• Angelo Malachias,
• Bernardo Ruegger Almeida Neves,
• Paulo Sergio Soares Guimarães and
• Wagner Nunes Rodrigues

Beilstein J. Nanotechnol. 2021, 12, 139–150, doi:10.3762/bjnano.12.11

• optical reflectance measurements and simulation, we were able to describe the origin of the strongly iridescent wing colors of this Amazonian rainforest damselfly. The method we demonstrate here should be useful for the study of other biological nanostructured systems. Keywords: dielectric constant

• such as the full understanding of proteins [1][2] or in the development of solar cells [3]. Natural photonic crystals are exciting nanostructured systems in which the dielectric properties play a fundamental role [4]. Many of them are biological systems where the richness of colors, produced by

• refractive index of biological nanostructured systems. Experimental Wing sample preparation for EFM Damselfly wing samples were produced by ultramicrotomy. Fragments of the chosen color region were embedded, without prior cleaning, in epoxy resin. The polymerized resin block was trimmed in a wedge shape

Design of a nanostructured mucoadhesive system containing curcumin for buccal application: from physicochemical to biological aspects

• Sabrina Barbosa de Souza Ferreira,
• Gustavo Braga,
• Évelin Lemos Oliveira,
• Jéssica Bassi da Silva,
• Hélen Cássia Rosseto,
• Lidiane Vizioli de Castro Hoshino,
• Mauro Luciano Baesso,
• Wilker Caetano,
• Craig Murdoch,
• Helen Elizabeth Colley and
• Marcos Luciano Bruschi

Beilstein J. Nanotechnol. 2019, 10, 2304–2328, doi:10.3762/bjnano.10.222

• , The University of Sheffield, Sheffield, UK 10.3762/bjnano.10.222 Abstract Mucoadhesive nanostructured systems comprising poloxamer 407 and Carbopol 974P® have already demonstrated good mucoadhesion, as well as improved mechanical and rheological properties. Curcumin displays excellent biological

• gelation temperature of 36 °C, which ensures increased retention after application in the oral cavity. The mucoadhesion results confirmed the previous findings with the nanostructured systems showing a residence time of 20 min in porcine oral mucosa under flow system conditions. Curcumin was released after

• selectivity targeting cancer cells. Keywords: curcumin; mucoadhesion; oral squamous cell carcinoma; permeation; poloxamer 407; Introduction The development of nanostructured systems containing poloxamer 407 (P407) and Carbopol 974P® (C974P) have previously been shown to have rheological and mechanical

Ternary nanocomposites of reduced graphene oxide, polyaniline and hexaniobate: hierarchical architecture and high polaron formation

• Claudio H. B. Silva,
• Maria Iliut,
• Christopher Muryn,
• Christian Berger,
• Zachary Coldrick,
• Vera R. L. Constantino,
• Marcia L. A. Temperini and
• Aravind Vijayaraghavan

Beilstein J. Nanotechnol. 2018, 9, 2936–2946, doi:10.3762/bjnano.9.272

• Nanostructured systems, such as nanocomposites, are potential materials for usage in different fields since synergistic effects of their components at the nanoscale domain may improve physical/chemical properties when compared to individual phases. We report here the preparation and characterisation of a new

• Nanostructured systems, such as nanocomposites, are potential materials for usage as electrochemical (bio)sensors for analytical purposes, electronics, energy storage devices and corrosion protection because the synergistic effects of their components at the nanoscale range may improve physical/chemical

Interaction-tailored organization of large-area colloidal assemblies

• Silvia Rizzato,
• Elisabetta Primiceri,
• Anna Grazia Monteduro,
• Adriano Colombelli,
• Angelo Leo,
• Maria Grazia Manera,
• Roberto Rella and
• Giuseppe Maruccio

Beilstein J. Nanotechnol. 2018, 9, 1582–1593, doi:10.3762/bjnano.9.150

• applications in many fields such as photonics/plasmonics [1], phononics [2][3], spintronics/magnonics [4][5], biosensors and energy harvesting [6][7][8]. For example, metal nanostructured systems, stimulated by incident light of a specific wavelength, can support localized surface plasmon resonant modes. The

• ; this is why a proper fabrication tool, able to guarantee good flexibility, is required to meet research goals. Typically, the fabrication of nanostructured systems involves techniques such as electron beam and focused ion beam lithography in order to realize arrays of nanoscale features with precise

Nanoscale mapping of dielectric properties based on surface adhesion force measurements

• Ying Wang,
• Yue Shen,
• Xingya Wang,
• Zhiwei Shen,
• Bin Li,
• Jun Hu and
• Yi Zhang

Beilstein J. Nanotechnol. 2018, 9, 900–906, doi:10.3762/bjnano.9.84

• ][3][4], carbon nanotube compounds [5][6][7][8], metal–dielectric films [9][10][11][12], and biomembranes [13][14][15]. Understanding the behaviour of these complex nanostructured systems requires precise morphological and dielectric characterization approaches on the nanometre scale. Atomic force

Statistics of work and orthogonality catastrophe in discrete level systems: an application to fullerene molecules and ultra-cold trapped Fermi gases

• Antonello Sindona,
• Michele Pisarra,
• Mario Gravina,
• Cristian Vacacela Gomez,
• Pierfrancesco Riccardi,
• Giovanni Falcone and
• Francesco Plastina

Beilstein J. Nanotechnol. 2015, 6, 755–766, doi:10.3762/bjnano.6.78

• many-particle states of the perturbed system with one or two excited fermions. We validate our approach through the comparison with some photoemission data on fullerene films and previous analytical calculations on harmonically trapped Fermi gases. Keywords: nanostructured systems; non-equilibrium

Carrier multiplication in silicon nanocrystals: ab initio results

• Ivan Marri,
• Marco Govoni and
• Stefano Ossicini

Beilstein J. Nanotechnol. 2015, 6, 343–352, doi:10.3762/bjnano.6.33

• . Again, by comparing the results of Figure 3b with the corresponding CM lifetimes calculated in [31], we can say that the efficiency of SSQC processes tends to increase with increasing NC size. In general, experiments are conducted on nanostructured systems that are larger than those considered in this

Combining nanoscale manipulation with macroscale relocation of single quantum dots

• Francesca Paola Quacquarelli,
• Richard A. J. Woolley,
• Martin Humphry,
• Jasbiner Chauhan,
• Philip J. Moriarty and
• Ashley Cadby

Beilstein J. Nanotechnol. 2012, 3, 324–328, doi:10.3762/bjnano.3.36

• larger than the diffraction limit of the microscope. The study of single fluorophores separated by distances larger than the diffraction limit has proven to be a valuable tool in understanding the optical properties of a broad range of nanostructured systems, including conjugated polymers [7