Natural nanofibers embedded in the seed mucilage envelope: composite hydrogels with specific adhesive and frictional properties

• Agnieszka Kreitschitz and
• Stanislav N. Gorb

Beilstein J. Nanotechnol. 2024, 15, 1603–1618, doi:10.3762/bjnano.15.126

• structure. This technique is very effective for sample imagining in TEM and SEM [7][41][67][68]. CPD minimises the negative pressure differences during drying. The comparison of CPD and air-drying techniques of plant material, for example, parenchymatic cells [69] and the mucilage envelope [7][13], clearly

An overview of microneedle applications, materials, and fabrication methods

• Zahra Faraji Rad,
• Philip D. Prewett and
• Graham J. Davies

Beilstein J. Nanotechnol. 2021, 12, 1034–1046, doi:10.3762/bjnano.12.77

• attacks. In this context, microneedle patches have the potential to save lives [43][44]. Several studies have shown that microneedles are capable of withdrawing blood and ISF by capillary action alone without the need for negative pressure (suction) [44][45]. The application of microneedle-based devices

• combination of drawing lithography and nickel electroplating (Figure 5a, Figure 5b). The bevelled tip of the structure was achieved through laser cutting. A negative pressure of 13.45 kPa was applied to extract 20 µL of blood from the tail of a mouse [104]. In another study, nickel microneedles were

Comprehensive review on ultrasound-responsive theranostic nanomaterials: mechanisms, structures and medical applications

• Sepand Tehrani Fateh,
• Lida Moradi,
• Elmira Kohan,
• Michael R. Hamblin and
• Amin Shiralizadeh Dezfuli

Beilstein J. Nanotechnol. 2021, 12, 808–862, doi:10.3762/bjnano.12.64

Perfusion double-channel micropipette probes for oxygen flux mapping with single-cell resolution

• Yang Gao,
• Bin Li,
• Riju Singhal,
• Adam Fontecchio,
• Ben Pelleg,
• Zulfiya Orynbayeva,
• Yury Gogotsi and
• Gary Friedman

Beilstein J. Nanotechnol. 2018, 9, 850–860, doi:10.3762/bjnano.9.79

• Smith Ind., quick-cure 5 min epoxy). The injection channel was then connected to a source of positive pressure, while the extraction channel was connected to a source of negative pressure. In this work, the positive pressure was supplied by a pressure pump (Eppendorf, FemtoJet), and a syringe pump (New

• defined as no-slip walls. A negative pressure and a positive pressure was defined respectively on the top boundaries of the two channels to form the injection and extraction flow in the laminar flow module. The calculated flow field was then used as the flow parameters in the convection and diffusion

• 5.2 μm to 16 μm. A negative pressure and an equal value positive pressure were defined respectively on the top boundaries of the two channels to form the injection and extraction flow. The upper boundary of the model was set as open boundary. For convection and diffusion studies, the injection

Hyperthermic intracavitary nanoaerosol therapy (HINAT) as an improved approach for pressurised intraperitoneal aerosol chemotherapy (PIPAC): Technical description, experimental validation and first proof of concept

• Daniel Göhler,
• Stephan Große,
• Alexander Bellendorf,
• Thomas Albert Falkenstein,
• Mehdi Ouaissi,
• Jürgen Zieren,
• Michael Stintz and
• Urs Giger-Pabst

Beilstein J. Nanotechnol. 2017, 8, 2729–2740, doi:10.3762/bjnano.8.272

• -component nozzle located in the nozzle head, wherein the volumetric flow rate of pressurised carbon dioxide leads to a negative pressure in the capillary. The lower end of the capillary is partly submerged in the liquid drug to be aerosolised. The negative pressure causes a liquid flow rate into the nozzle

Numerical investigation of the tribological performance of micro-dimple textured surfaces under hydrodynamic lubrication

• Kangmei Li,
• Dalei Jing,
• Jun Hu,
• Xiaohong Ding and
• Zhenqiang Yao

Beilstein J. Nanotechnol. 2017, 8, 2324–2338, doi:10.3762/bjnano.8.232

• -dimple array under the condition of hydrodynamic lubrication. The pressure and velocity distribution are obtained using the finite volume method. Negative pressure is permitted and cavitation is not yet considered. The main mechanism for the improvement of the tribological performance by micro-dimple

• divergent part. With suitable parameters (e.g., shape and size of the micro-dimple unit, film thickness and velocity of fluid), the magnitude of the positive pressure could be greater than that of the negative pressure, which makes the total integration of the pressure in the micro-dimple unit become

• of the micro-dimple unit. From Figure 8 and Figure 9, it can be seen that the Reynolds number affects the dimensionless pressure distribution significantly. The magnitude of the positive and negative pressure increases with Reynolds number. The increase rate of the positive pressure, however, is

Dispersion of single-wall carbon nanotubes with supramolecular Congo red – properties of the complexes and mechanism of the interaction

• Anna Jagusiak,
• Barbara Piekarska,
• Tomasz Pańczyk,
• Małgorzata Jemioła-Rzemińska,
• Elżbieta Bielańska,
• Barbara Stopa,
• Grzegorz Zemanek,
• Janina Rybarska,
• Irena Roterman and
• Leszek Konieczny

Beilstein J. Nanotechnol. 2017, 8, 636–648, doi:10.3762/bjnano.8.68

• degassed for 10–15 min before the measurement using the negative pressure of 0.3–0.5 atm. A reference chamber was filled with a buffer used for the analysed sample. All the measurements were performed at 3 bar pressure in a 0.33 mL capillary cell. Data was collected in the range of 10–90 °C at 1 °C·min−1

Morphology, structural properties and reducibility of size-selected CeO_2−x nanoparticle films

• Maria Chiara Spadaro,
• Sergio D’Addato,
• Gabriele Gasperi,
• Francesco Benedetti,
• Paola Luches,
• Vincenzo Grillo,
• Giovanni Bertoni and
• Sergio Valeri

Beilstein J. Nanotechnol. 2015, 6, 60–67, doi:10.3762/bjnano.6.7

• range Coulomb attractive and short range repulsive interactions is broken, leading to an effective negative pressure and thus to an increase of the lattice parameter [9]. Actually, a proper combination of all these factors, namely the increase of concentration of Ce3+ ions, oxygen vacancies and Madelung

Aquatic versus terrestrial attachment: Water makes a difference

• Petra Ditsche and
• Adam P. Summers

Beilstein J. Nanotechnol. 2014, 5, 2424–2439, doi:10.3762/bjnano.5.252

• negative pressure, but the values are not as low as for pure water. Particles and microbubbles in the seawater provide nucleating sites that stabilize the growth of larger gas bubbles [72]. Suction also depends on the surface energy of the substrate, as no negative pressures were found on non-wettable

Quasi-1D physics in metal-organic frameworks: MIL-47(V) from first principles

• Danny E. P. Vanpoucke,
• Jan W. Jaeken,
• Stijn De Baerdemacker,
• Kurt Lejaeghere and
• Veronique Van Speybroeck

Beilstein J. Nanotechnol. 2014, 5, 1738–1748, doi:10.3762/bjnano.5.184

• ) going from the ferromagnetic to the antiferromagnetic chains. Since the bulk modulus of a material is a measure for its resistance to deformation under an external pressure, and a negative pressure derivative (cf. in Table 1) indicates a breakdown of this resistance under an applied pressure, a

Direct observation of microcavitation in underwater adhesion of mushroom-shaped adhesive microstructure

• Lars Heepe,
• Alexander E. Kovalev and
• Stanislav N. Gorb

Beilstein J. Nanotechnol. 2014, 5, 903–909, doi:10.3762/bjnano.5.103

• negative pressure (tension), the pull-off forces were consistently lower, around 50%, of those measured under ambient conditions. This result supports the assumption that the recently observed strong underwater adhesion of MSAMS is due to an air layer between individual MSAMSs [Kizilkan, E.; Heepe, L

• in predominantly liquid environments. Keywords: bio-inspired; biomimetic; cavitation; contact mechanics; gecko; interface; negative pressure; pull-off; surface; tribology; Introduction During the past two decades, bio-inspired microstructured adhesives became a new class of adhesive materials with

• hypothesized that the enhanced underwater adhesion may be a result of cavitation under each individual MSAMS when entrapped water in the contact area is subjected to a negative pressure (tension) during pull-off and the liquid water turns into vapor at a certain cavitation threshold [19]. This effect would