Effect of additives on the synthesis efficiency of nanoparticles by laser-induced reduction

• Rikuto Kuroda,
• Takahiro Nakamura,
• Hideki Ina and
• Shuhei Shibata

Beilstein J. Nanotechnol. 2025, 16, 464–472, doi:10.3762/bjnano.16.35

• ) synthesized by LAL with IPA as a scavenger. UV–vis absorption spectrum after 60 min of laser irradiation in aqueous solutions of cobalt nitrate a) without and b) with IPA as a scavenger. The inset images are photographs of the appearance of each solution before and after laser irradiation. c) A TEM image of

Quantification of lead through rod-shaped silver-doped zinc oxide nanoparticles using an electrochemical approach

• Ravinder Lamba,
• Gaurav Bhanjana,
• Neeraj Dilbaghi,
• Vivek Gupta and
• Sandeep Kumar

Beilstein J. Nanotechnol. 2025, 16, 422–434, doi:10.3762/bjnano.16.33

• -Aldrich and used as such without any additional purification steps. Firstly, a 2 mL aqueous solution of silver nitrate (AgNO3) (0.1 M) and a 100 mL aqueous solution of zinc nitrate hexahydrate (Zn (NO3)2·6H2O) (0.1 M) were simultaneously prepared. After that, the silver nitrate solution was mixed with the

• zinc nitrate hexahydrate solution. The resulting solution was stirred for approximately 10 min at room temperature. After the reaction time, a 1 M potassium hydroxide (KOH) solution was gradually added drop by drop. This step adjusted the pH of the mixture to 10. Then the mixture underwent further

Emerging strategies in the sustainable removal of antibiotics using semiconductor-based photocatalysts

• Yunus Ahmed,
• Keya Rani Dutta,
• Parul Akhtar,
• Md. Arif Hossen,
• Md. Jahangir Alam,
• Obaid A. Alharbi,
• Hamad AlMohamadi and
• Abdul Wahab Mohammad

Beilstein J. Nanotechnol. 2025, 16, 264–285, doi:10.3762/bjnano.16.21

• endeavors have been undertaken, including the creation of heterojunctions or the introduction of metal doping. Wang et al. [84] synthesized BiOCl/Mt photocatalysts in which montmorillonite (Mt), which is naturally rich in iron, was combined with bismuth nitrate. According to the authors, the composite

A review of metal-organic frameworks and polymers in mixed matrix membranes for CO₂ capture

• Charlotte Skjold Qvist Christensen,
• Nicholas Hansen,
• Mahboubeh Motadayen,
• Nina Lock,
• Martin Lahn Henriksen and
• Jonathan Quinson

Beilstein J. Nanotechnol. 2025, 16, 155–186, doi:10.3762/bjnano.16.14

• -case basis. An entirely different approach to improving the MOF–polymer interface is shown in the study by Maleh and Raisi [91], where ZIF-8 MOFs were grown in situ in a Pebax® 2533 polymer matrix. The authors prepared a polymer solution in ethanol containing well-dispersed zinc nitrate hexahydrate and

Instance maps as an organising concept for complex experimental workflows as demonstrated for (nano)material safety research

• Benjamin Punz,
• Maja Brajnik,
• Joh Dokler,
• Jaleesia D. Amos,
• Litty Johnson,
• Katie Reilly,
• Anastasios G. Papadiamantis,
• Amaia Green Etxabe,
• Lee Walker,
• Diego S. T. Martinez,
• Steffi Friedrichs,
• Klaus M. Weltring,
• Nazende Günday-Türeli,
• Claus Svendsen,
• Christine Ogilvie Hendren,
• Mark R. Wiesner,
• Martin Himly,
• Iseult Lynch and
• Thomas E. Exner

Beilstein J. Nanotechnol. 2025, 16, 57–77, doi:10.3762/bjnano.16.7

• polyvinylpyrrolidone (PVP) surface by reduction of silver nitrate in ethylene glycol with 10k PVP. The PVP-AgNPs are characterised regarding some of their physical attributes such as the particles’ shape, size, and crystalline phase. The particles are then sulfidised using different specified concentrations of the PVP

Facile synthesis of size-tunable L-carnosine-capped silver nanoparticles and their role in metal ion sensing and catalytic degradation of p-nitrophenol

• Akash Kumar,
• Ridhima Chadha,
• Abhishek Das,
• Nandita Maiti and
• Rayavarapu Raja Gopal

Beilstein J. Nanotechnol. 2024, 15, 1576–1592, doi:10.3762/bjnano.15.124

• advancement of nanoparticle-based technologies to tackle some of the most pressing environmental challenges of our times. Materials and Methods Materials ʟ-Carnosine (cat. no. 29825, purity ≥95%), silver nitrate (AgNO3, cat. no. 1.93200.0027, purity ≥99.5%), and sodium borohydride (NaBH4, cat. no. 480886

Green synthesis of silver nanoparticles derived from algae and their larvicidal properties to control Aedes aegypti

• Matheus Alves Siqueira de Assunção,
• Douglas Dourado,
• Daiane Rodrigues dos Santos,
• Gabriel Bezerra Faierstein,
• Mara Elga Medeiros Braga,
• Severino Alves Junior,
• Rosângela Maria Rodrigues Barbosa,
• Herminio José Cipriano de Sousa and
• Fábio Rocha Formiga

Beilstein J. Nanotechnol. 2024, 15, 1566–1575, doi:10.3762/bjnano.15.123

• activity. The authors did not highlight the period of time after which mortality was evaluated. The formation of AgNPs after mixing the extracts with silver nitrate can be due to the synergy of biomolecules with reducing activity present in the extracts binding to the surface of the particles [64]. Despite

Nanoarchitectonics with cetrimonium bromide on metal nanoparticles for linker-free detection of toxic metal ions and catalytic degradation of 4-nitrophenol

• Akash Kumar and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2024, 15, 1312–1332, doi:10.3762/bjnano.15.106

• . Silver nitrate (AgNO3) (Cat No. 1.93200.0027) and hydrochloric acid (HCl) (Cat No. 1.93001.2521) were obtained from Merck. Sodium hydroxide (NaOH) (Cat No. TC1460), chloroauric acid trihydrate (HAuCl4·3H2O) (Cat No.10724SG001) and 4-nitrophenol (4-NP) (Cat No. 144956) were purchased from CDH fine

Dual-functionalized architecture enables stable and tumor cell-specific SiO₂NPs in complex biological fluids

• Iris Renata Sousa Ribeiro,
• Raquel Frenedoso da Silva,
• Romênia Ramos Domingues,
• Adriana Franco Paes Leme and
• Mateus Borba Cardoso

Beilstein J. Nanotechnol. 2024, 15, 1238–1252, doi:10.3762/bjnano.15.100

• 200 V for 1 h and then the gel was stained with silver nitrate to visualize the bands. PageRuler™ Prestained Protein Ladder (Thermo Scientific) was used as a standard. The DMEM culture medium used for SiO2NP incubation was also added to the gel for comparison purposes. To determine the total protein

Photocatalytic methane oxidation over a TiO₂/SiNWs p–n junction catalyst at room temperature

• Qui Thanh Hoai Ta,
• Luan Minh Nguyen,
• Ngoc Hoi Nguyen,
• Phan Khanh Thinh Nguyen and
• Dai Hai Nguyen

Beilstein J. Nanotechnol. 2024, 15, 1132–1141, doi:10.3762/bjnano.15.92

• . Experimental Chemicals and materials Commercial p-type Si 3-inch wafers (⟨100⟩ orientation, boron-doped, resistivity = 0.01–1 Ω·cm) were purchased from Silicon Mitus Corporation, South Korea. Silver nitrate (AgNO3, 0.1 M), hydrofluoric acid HF (50 wt %), nitric acid (HNO3, 63%), acetone, and ethanol were

Facile synthesis of Fe-based metal–organic frameworks from Fe₂O₃ nanoparticles and their application for CO₂/N₂ separation

• Van Nhieu Le,
• Hoai Duc Tran,
• Minh Tien Nguyen,
• Hai Bang Truong,
• Toan Minh Pham and
• Jinsoo Kim

Beilstein J. Nanotechnol. 2024, 15, 897–908, doi:10.3762/bjnano.15.74

• trimesic acid [19]. These factors caused an immense rise in production cost. Further efforts were made to enhance both product quality and yield by using FeCl3·6H2O and iron(III) nitrate nonahydrate (Fe(NO3)3·9H2O) as iron precursors in a high-temperature reactor without HF and HNO3. The findings revealed

• , yielding 82% and a BET surface area of 2050 m2·g−1 [20]. Since then, various green synthetic routes from ferric nitrate and metallic iron powder have been developed for generating MIL-100(Fe), including low-temperature synthesis [21], solvent-free synthesis [22], and dry gel conversion pathway [23]. It

Electrospun polysuccinimide scaffolds containing different salts as potential wound dressing material

• Veronika Pálos,
• Krisztina S. Nagy,
• Rita Pázmány,
• Krisztina Juriga-Tóth,
• Bálint Budavári,
• Judit Domokos,
• Dóra Szabó,
• Ákos Zsembery and
• Angela Jedlovszky-Hajdu

Beilstein J. Nanotechnol. 2024, 15, 781–796, doi:10.3762/bjnano.15.65

• containing antibacterial and tissue-regenerating salts of zinc acetate or strontium nitrate in different concentrations, whose structures may be suitable for developing biomedical wound dressing systems in the future. Several experiments have been conducted to optimize the physicochemical, mechanical, and

• atoms in the scaffolds. Our result showed that the salts influence the mechanical properties of the polymer scaffold, both in terms of specific load capacity and relative elongation values. According to the dissolution experiments, the whole amount of strontium nitrate was dissolved from the scaffold in

• ); strontium nitrate (Reanal, Hungary); ʟ-aspartic acid (99%, Amresco, USA); phosphoric acid (≥99.0%, Sigma-Aldrich, USA); E. coli (ATCC 25922); P. aeruginosa (ATCC 27853); B. subtilis (ATCC 6633); S. epidermidis (ATCC 14990); Mueller–Hinton agar (Biolab Zrt., Hungary); minimum essential medium (MEM, Gibco

Effect of repeating hydrothermal growth processes and rapid thermal annealing on CuO thin film properties

• Monika Ozga,
• Eunika Zielony,
• Aleksandra Wierzbicka,
• Anna Wolska,
• Marcin Klepka,
• Marek Godlewski,
• Bogdan J. Kowalski and
• Bartłomiej S. Witkowski

Beilstein J. Nanotechnol. 2024, 15, 743–754, doi:10.3762/bjnano.15.62

• . Conversely, direct thin film growth through the hydrothermal approach is outlined in [44][45]. In a different study [46], CuO films were grown on glass substrates coated with CuHNO4 through 4, 8, and 12 h long hydrothermal treatments of copper hydroxide nitrate suspension at 200 °C. Another example is the

Gold nanomakura: nanoarchitectonics and their photothermal response in association with carrageenan hydrogels

• Nabojit Das,
• Vikas,
• Akash Kumar,
• Sanjeev Soni and
• Raja Gopal Rayavarapu

Beilstein J. Nanotechnol. 2024, 15, 678–693, doi:10.3762/bjnano.15.56

• nitrate (AgNO3, Merck), ʟ-(+)-ascorbic acid (Sigma-Aldrich), and sodium borohydride (NaBH4, Sigma-Aldrich). Prior to synthesis, all the glassware was cleaned with aqua regia and further rinsed with double-distilled (DD) water. Double-distilled water was used throughout the experiments. Methodology

Photocatalytic degradation of methylene blue under visible light by cobalt ferrite nanoparticles/graphene quantum dots

• Vo Chau Ngoc Anh,
• Le Thi Thanh Nhi,
• Le Thi Kim Dung,
• Dang Thi Ngoc Hoa,
• Nguyen Truong Son,
• Nguyen Thi Thao Uyen,
• Nguyen Ngoc Uyen Thu,
• Le Van Thanh Son,
• Le Trung Hieu,
• Tran Ngoc Tuyen and
• Dinh Quang Khieu

Beilstein J. Nanotechnol. 2024, 15, 475–489, doi:10.3762/bjnano.15.43

• synthesize cobalt ferrite nanoparticles/graphene quantum dots (CF/GQDs). The material was prepared from a homogeneous mixture of iron nitrate, cobalt nitrate, and starch at 140, 180 and 200 °C in a 24 h thermal hydrolysis process. The obtained materials were characterised by using X-ray diffraction, scanning

• /GQDs nanoparticles. Magnetic properties, morphology, structure, and fluorescence of the nanocomposites were studied, and the photocatalytic degradation of methylene blue as a dye model and the mechanism of methylene degradation were also addressed. Experimental Materials Cobalt(II) nitrate hexahydrate

• (Co(NO3)2·6H2O, 98%), iron(III) nitrate nonahydrate (Fe(NO3)3·9H2O, 98%), and starch ((C6H10O5)n, 98%) were purchased from Merck, Germany. Methylene blue trihydrate (C16H18ClN3S·3H2O), isopropanol (C3H8O), potassium iodide (KI), and potassium bromate (KBrO3) were also purchased from Merck, and

Potential of a deep eutectic solvent in silver nanoparticle fabrication for antibiotic residue detection

• Le Hong Tho,
• Bui Xuan Khuyen,
• Ngoc Xuan Dat Mai and
• Nhu Hoa Thi Tran

Beilstein J. Nanotechnol. 2024, 15, 426–434, doi:10.3762/bjnano.15.38

• DES in nanomaterials fabrication and a possible guidance for low-cost and effective SERS substrate construction in biosensors. Experimental Chemicals ʟ-Ascorbic acid (AA, C6H8O6, 99%), silver nitrate (AgNO3, 99%), (3-aminopropyl)triethoxysilane (APTES, 99%), NFT (C8H6N4O5, 98%), and SDZ (C10H10N4O2S

Assessing phytotoxicity and tolerance levels of ZnO nanoparticles on Raphanus sativus: implications for widespread adoptions

• Pathirannahalage Sahan Samuditha,
• Nadeesh Madusanka Adassooriya and
• Nazeera Salim

Beilstein J. Nanotechnol. 2024, 15, 115–125, doi:10.3762/bjnano.15.11

• nanomaterials may dissolve and then undergo biotransformation or be internalized as intact particles in a biological context [48]. As an example, the biotransformation of ZnO NPs into Zn nitrate, Zn phosphate, and Zn citrate in desert plant species has been reported [49]. Also, the bioaccumulation of intact ZnO

New application of bimetallic Ag/Pt nanoplates in a colorimetric biosensor for specific detection of E. coli in water

• Azam Bagheri Pebdeni,
• Mohammad N. AL-Baiati and
• Morteza Hosseini

Beilstein J. Nanotechnol. 2024, 15, 95–103, doi:10.3762/bjnano.15.9

• system offers a rapid, sensitive, and portable biosensor for preventing E. coli contamination and resolving public health concerns in the future. Experimental Materials Silver nitrate (AgNO3), potassium tetrachloroplatinate(II), ascorbic acid, TMB, H2O2 (for determining peroxidase-like activity), and

Nanotechnological approaches in the treatment of schistosomiasis: an overview

• Lucas Carvalho,
• Michelle Sarcinelli and
• Beatriz Patrício

Beilstein J. Nanotechnol. 2024, 15, 13–25, doi:10.3762/bjnano.15.2

• mobility, couple separation, and tegument alterations. In vivo, the main criteria used is reducing worm burden, quantity and diameter of granuloma, eggs in feces, and oxidative stress markers (e.g., glutathione, nitrite/nitrate, and malondialdehyde). Generally, articles that do not show effectiveness data

A visible-light photodetector based on heterojunctions between CuO nanoparticles and ZnO nanorods

• Doan Nhat Giang,
• Nhat Minh Nguyen,
• Duc Anh Ngo,
• Thanh Trang Tran,
• Le Thai Duy,
• Cong Khanh Tran,
• Thi Thanh Van Tran,
• Phan Phuong Ha La and
• Vinh Quang Dang

Beilstein J. Nanotechnol. 2023, 14, 1018–1027, doi:10.3762/bjnano.14.84

• ), zinc nitrate hexahydrate (Zn(NO3)2·6H2O, 99%, Xilong Scientific), copper(II) nitrate pentahydrate (Cu(NO3)2·5H2O, 99%, Xilong Scientific), sodium hydroxide (NaOH, 99%, Sigma-Aldrich Chemistry), ethanol (C2H5OH, 99.5%, Chemsol), and acetone (CH3OCH3, 99.7%, Chemsol). Synthesis process The synthesis

Upscaling the urea method synthesis of CoAl layered double hydroxides

• Camilo Jaramillo-Hernández,
• Víctor Oestreicher,
• Martín Mizrahi and
• Gonzalo Abellán

Beilstein J. Nanotechnol. 2023, 14, 927–938, doi:10.3762/bjnano.14.76

• (P, As, Sb and Bi)) to multielementals (e.g., boron nitrate, metal dichalcogenides, MXenes, layered metal/covalent organic frameworks, or layered hydroxides/oxides) [9][10][11]. These systems exhibit an enormous variability in their physicochemical properties, which are defined by their layer-to

Silver-based SERS substrates fabricated using a 3D printed microfluidic device

• Phommachith Sonexai,
• Minh Van Nguyen,
• Bui The Huy and
• Yong-Ill Lee

Beilstein J. Nanotechnol. 2023, 14, 793–803, doi:10.3762/bjnano.14.65

• various scientific and technological applications. The Ag NPs were synthesized using a droplet-based microfluidic device and a stereolithographic 3D printing method. The microfluidic device was optimized to produce uniform droplets, within which silver nitrate was reduced by sodium borohydride. This

• . Experimental Chemicals and apparatus Silver nitrate (AgNO3, 99.9%) was purchased from Kojima Chemical (Japan). Sodium borohydride (NaBH4, 98%) and melamine (99%) were obtained from Sigma-Aldrich (Republic of Korea). Hydrofluoric acid (48–51%), sulfuric acid (98%), nitric acid (65–70%), rhodamine B (pure

• aqueous solutions and oil, respectively. Synthesis of silver nanoparticles Different molar ratios of silver nitrate to sodium borohydride were used to produce Ag nanoparticles in the microfluidic device at room temperature, with flow rates of 20 and 80 µL/min for the aqueous solutions and oil

Silver nanoparticles loaded on lactose/alginate: in situ synthesis, catalytic degradation, and pH-dependent antibacterial activity

• Nguyen Thi Thanh Tu,
• T. Lan-Anh Vo,
• T. Thu-Trang Ho,
• Kim-Phuong T. Dang,
• Van-Dung Le,
• Phan Nhat Minh,
• Chi-Hien Dang,
• Vinh-Thien Tran,
• Van-Su Dang,
• Tran Thi Kim Chi,
• Hieu Vu-Quang,
• Radek Fajgar,
• Thi-Lan-Huong Nguyen,
• Van-Dat Doan and
• Thanh-Danh Nguyen

Beilstein J. Nanotechnol. 2023, 14, 781–792, doi:10.3762/bjnano.14.64

• reagents were purchased from Acros (Belgium): silver nitrate (AgNO3), methyl orange (MO), rhodamine B (RhB), calcium acetate hydrate, sodium alginate, and sodium tetrahydroborate (NaBH4). Lactose was obtained from Yong Da (China). The chemicals were used without additional purification. Distilled water was

Carboxylic acids and light interact to affect nanoceria stability and dissolution in acidic aqueous environments

• Matthew L. Hancock,
• Eric A. Grulke and
• Robert A. Yokel

Beilstein J. Nanotechnol. 2023, 14, 762–780, doi:10.3762/bjnano.14.63

• , namely citric, malic, isocitric, glyceric, lactic, tartaric, α-hydroxybutyric, β-hydroxybutyric, succinic, pimelic, glutaric, tricarballylic, adipic, acetic, tartronic, and dihydroxymalonic acid. Controls, including ascorbic acid, ammonium nitrate, sodium nitrate, and water, were also tested. The goal

• , there was no evidence of significant particle agglomeration. Group three contains lactic and tartaric acid, ammonium nitrate, and water. Again, there was a small reduction in hydrodynamic particle size over time and no noticeable color change when stored in the dark, similar to groups one and two. The

• , pimelic, glutaric, tricarballylic, adipic, and acetic acid plus sodium nitrate. As was the case for groups one through three for the samples stored in the dark, there was a small reduction in hydrodynamic particle size over time with no noticeable change in color. Nanoceria agglomerated in the presence of

Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review

• Akeem Adeyemi Oladipo,
• Saba Derakhshan Oskouei and
• Mustafa Gazi

Beilstein J. Nanotechnol. 2023, 14, 631–673, doi:10.3762/bjnano.14.52