Facile synthesis of size-tunable L-carnosine-capped silver nanoparticles and their role in metal ion sensing and catalytic degradation of p-nitrophenol

• Akash Kumar,
• Ridhima Chadha,
• Abhishek Das,
• Nandita Maiti and
• Rayavarapu Raja Gopal

Beilstein J. Nanotechnol. 2024, 15, 1576–1592, doi:10.3762/bjnano.15.124

• nanotechnology have ushered in the development of nanoparticle-based systems that offer promising alternatives because of their simplicity, cost-effectiveness, and potential for real-time applications. Plasmonic nanoparticles, such as silver, have been widely explored for their unique plasmonic and catalytic

Nanoarchitectonics of photothermal materials to enhance the sensitivity of lateral flow assays

• Elangovan Sarathkumar,
• Rajasekharan S. Anjana and
• Ramapurath S. Jayasree

Beilstein J. Nanotechnol. 2023, 14, 988–1003, doi:10.3762/bjnano.14.82

• nanoparticles: The optical, physical, and chemical properties of plasmonic nanoparticles highly depend on the number of valence electrons. When the oscillating frequency of the electron cloud matches the frequency of the electromagnetic irradiation, LSPR occurs [35]. The excited plasmonic photothermal agent

• ://biorender.com/. This content is not subject to CC BY 4.0.) Heat conversion by plasmonic nanoparticles (A & B), (Figure 4A was republished with permission of the Royal Society of Chemistry, from [37], "Emerging advances in nanomedicine with engineered gold nanostructures" by J. A. Webb and R. Bardhan, Nanoscale

• change [20][21]. Generally, photothermal nanomaterials are being used in cancer therapy, removal of bacterial biofilms, and sensing applications [22][23][24]. Photothermal nanomaterials produce heat in response to the irradiation of photons at a particular wavelength [23]. Similarly, when plasmonic

Plasmonic nanotechnology for photothermal applications – an evaluation

• A. R. Indhu,
• L. Keerthana and
• Gnanaprakash Dharmalingam

Beilstein J. Nanotechnol. 2023, 14, 380–419, doi:10.3762/bjnano.14.33

• A. R. Indhu L. Keerthana Gnanaprakash Dharmalingam Plasmonic Nanomaterials Laboratory, PSG Institute of Advanced Studies, Coimbatore-641004, India 10.3762/bjnano.14.33 Abstract The application of plasmonic nanoparticles is motivated by the phenomenon of surface plasmon resonance. Owing to the

• absorbed light to heat by these particles, has led to thriving research regarding the utilization of plasmonic nanoparticles for a myriad of applications. The design of conventional nanomaterials for PT conversion has focussed predominantly on the manipulation of photon absorption through bandgap

• not absorbed by generic PT materials can be utilized for absorption and eventual conversion into heat by incorporation of plasmonic nanoparticles of appropriate sizes and shapes. Plasmons, that is, collective electron excitations, are either excited in the bulk of the material (volume plasmons) or on

Zinc oxide nanostructures for fluorescence and Raman signal enhancement: a review

• Ioana Marica,
• Fran Nekvapil,
• Maria Ștefan,
• Cosmin Farcău and
• Alexandra Falamaș

Beilstein J. Nanotechnol. 2022, 13, 472–490, doi:10.3762/bjnano.13.40

• -sensitized solar cells (DSSCs). Au–ZnO plasmonic nanoparticles were studied for DSSCs application and their enhancement capabilities were assigned to the SPR effect [91]. Hence, the ZnO PL is of great interest and its enhancement is also important in order to develop efficient optoelectronic devices

Assessment of the optical and electrical properties of light-emitting diodes containing carbon-based nanostructures and plasmonic nanoparticles: a review

• Keshav Nagpal,
• Erwan Rauwel,
• Frédérique Ducroquet and
• Protima Rauwel

Beilstein J. Nanotechnol. 2021, 12, 1078–1092, doi:10.3762/bjnano.12.80

• quantum efficiencies, and luminance. De facto, plasmonic nanoparticles, such as Au and Ag have boosted the luminance of red, green, and blue emissions. When combined with carbon nanostructures they additionally offer new possibilities towards lightweight and flexible devices with better thermal management

• . This review surveys the diverse possibilities to combine various inorganic, organic, and carbon nanostructures along with plasmonic nanoparticles. Such combinations would allow an enhancement in the overall properties of LED. Keywords: carbon nanotubes (CNT); graphene; light-emitting diodes (LED

• ); plasmonic nanoparticles; quantum dots; Review Introduction Nanomaterials have engendered the miniaturization of devices, bringing about advances in a variety of fields, such as biomedicine, environmental technologies, optoelectronics, and photocatalysis [1][2]. In particular, light-emitting diodes (LED

Photothermally active nanoparticles as a promising tool for eliminating bacteria and biofilms

• Mykola Borzenkov,
• Piersandro Pallavicini,
• Angelo Taglietti,
• Laura D’Alfonso,
• Maddalena Collini and
• Giuseppe Chirico

Beilstein J. Nanotechnol. 2020, 11, 1134–1146, doi:10.3762/bjnano.11.98

• nanomaterial used, for example, aqueous solutions, self-assembled monolayers or polymeric nanocomposites [33]. In the case of plasmonic nanoparticles, the plasmonic properties (i.e., the maximum position of the absorption band and the band shape) are strongly affected by the conditions under which the

• nanoparticles are synthesized, resulting in nanoparticles with different dimensions and shape. On the other hand, the nanoparticle surface chemistry as well as the surrounding environment exert a weaker influence on the plasmonic properties. For the non-plasmonic nanoparticles, the photothermal properties are

Luminescent gold nanoclusters for bioimaging applications

• Nonappa

Beilstein J. Nanotechnol. 2020, 11, 533–546, doi:10.3762/bjnano.11.42

• an exact number of metal atoms and surface ligands (Figure 1A,B). Therefore, NCs are considered as colloidal molecules. Similar to plasmonic nanoparticles, the stability of NCs can be controlled by ligand passivation using small molecules, synthetic polymers or biomacromolecules. A significant

• of gold nanoclusters. A) Nanoclusters provide a link between molecular complexes and plasmonic nanoparticles. B) X-ray structure of [Au25(PET)18], from CSD entry JACVOB. C) Chemical structure of some of the organic thiols discussed in this review (PET: phenylethane thiol; LA: lipoic acid; GSH

Using gold nanoparticles to detect single-nucleotide polymorphisms: toward liquid biopsy

• María Sanromán Iglesias and
• Marek Grzelczak

Beilstein J. Nanotechnol. 2020, 11, 263–284, doi:10.3762/bjnano.11.20

• solution containing plasmonic nanoparticles (from red to blue) in the presence of molecules offers an excellent tool for colorimetric sensing without the need of using advanced techniques. Similarly, selective fluorescence quenching of organic dyes or semiconducting nanoparticles by plasmonic nanoparticles

• giving rise to the so-called localized surface plasmon resonance (LSPR). The position and the bandwidth of the LSPR can be modulated by the shape of the nanocrystals and can vary between 400 and 2000 nm. The high absorption cross section (plasmonic nanoparticles absorb photons over a region about ten

• the L858R point mutation in exon 21 were detected at a concentration of 10 ng/μL. Another strategy to improve the sensitivity of colorimetric biosensors based on plasmonic nanoparticles is the use of a molecular tool known as toehold-mediated strand displacement [132], in which one strand of DNA

Fabrication of Ag-modified hollow titania spheres via controlled silver diffusion in Ag–TiO₂ core–shell nanostructures

• Bartosz Bartosewicz,
• Malwina Liszewska,
• Bogusław Budner,
• Marta Michalska-Domańska,
• Krzysztof Kopczyński and
• Bartłomiej J. Jankiewicz

Beilstein J. Nanotechnol. 2020, 11, 141–146, doi:10.3762/bjnano.11.12

• (HSs) have received increasing attention due to their potential application in a variety of areas [1][2][3][4] such as solar energy conversion or photocatalysis [2][5][6][7]. Among them, of great interest are TiO2 HSs modified with plasmonic nanoparticles (NPs), which allow for the combination of the

Correlation of surface-enhanced Raman scattering (SERS) with the surface density of gold nanoparticles: evaluation of the critical number of SERS tags for a detectable signal

• Vincenzo Amendola

Beilstein J. Nanotechnol. 2019, 10, 1016–1023, doi:10.3762/bjnano.10.102

• plasmonic nanoparticles dispersed on a substrate [38], inside microcavities [39], or even while monitoring electrochemical reactions [40]. This work reports on the study of SERS tags obtained by laser ablation synthesis in liquid solution (LASiS) of gold (Au) nanoparticles, their coating with three

• , as shown in Figure 1C, resulting in a comparable mean size of 63 ± 21 nm for HITC, 62 ± 25 nm for MG and 70 ± 22 nm for MGITC. Importantly, the AuNTs show several junctions between plasmonic nanoparticles, which are well known sites of electromagnetic enhancement, as required for SERS [49][50][51][52

Silencing the second harmonic generation from plasmonic nanodimers: A comprehensive discussion

• Jérémy Butet,
• Gabriel D. Bernasconi and
• Olivier J. F. Martin

Beilstein J. Nanotechnol. 2018, 9, 2674–2683, doi:10.3762/bjnano.9.250

• nanostructures corresponds to the limited far-field second harmonic radiation despite the huge fundamental electric field enhancement in the interstice between two plasmonic nanoparticles forming a nanodimer. In this article, we report a comprehensive investigation of this effect using a surface integral

Enhancement of X-ray emission from nanocolloidal gold suspensions under double-pulse excitation

• Wei-Hung Hsu,
• Frances Camille P. Masim,
• Armandas Balčytis,
• Hsin-Hui Huang,
• Tetsu Yonezawa,
• Aleksandr A. Kuchmizhak,
• Saulius Juodkazis and
• Koji Hatanaka

Beilstein J. Nanotechnol. 2018, 9, 2609–2617, doi:10.3762/bjnano.9.242

• great interest, due to the efficient conversion of the absorbed energy into energetic ions, electrons and X-rays [12][13][14]. Plasmonic nanoparticles are expected to be highly useful for femtosecond laser-based X-ray emission due to high functionality, large absorption cross section and spectral

• selectivity based on surface plasmon resonance [15]. An increase of the laser-absorption efficiency can be expected in plasmonic nanoparticles, which results in the efficient generation of highly ionized charge states [13][14]. It is expected that this characteristic interaction between intense femtosecond

• laser and plasmonic nanoparticles will contribute to a broad field of applications ranging from pulsed X-ray generation to energetic particle sources [14] or terahertz wave emission from aqueous solutions [16]. In recent experimental studies, intense fs-laser excitation of plasmonic gold nanoparticles

Directional light beams by design from electrically driven elliptical slit antennas

• Shuiyan Cao,
• Eric Le Moal,
• Quanbo Jiang,
• Aurélien Drezet,
• Serge Huant,
• Jean-Paul Hugonin,
• Gérald Dujardin and
• Elizabeth Boer-Duchemin

Beilstein J. Nanotechnol. 2018, 9, 2361–2371, doi:10.3762/bjnano.9.221

• spectrum [21][22][23][24]. When based on a single plasmonic nanoparticle, these sources exhibit angularly broad emission patterns resembling that of an electric dipole, possibly with additional higher-order multipolar contributions [25][26][27]. Antenna designs based on the arrangement of several plasmonic

• nanoparticles (e.g., Yagi–Uda antennas [28]) yield more directional emission [29]. However, the light is most often emitted at the critical angle of the substrate–superstrate interface [30] or in directions that strongly vary depending on the optical frequency [31]. Light beams with an angular spread of only a

Interaction-tailored organization of large-area colloidal assemblies

• Silvia Rizzato,
• Elisabetta Primiceri,
• Anna Grazia Monteduro,
• Adriano Colombelli,
• Angelo Leo,
• Maria Grazia Manera,
• Roberto Rella and
• Giuseppe Maruccio

Beilstein J. Nanotechnol. 2018, 9, 1582–1593, doi:10.3762/bjnano.9.150

• on the enhancement of the absorption cross-section (ACS) require the fabrication of plasmonic nanoparticles characterized by relatively small dimensions (e.g. ≈40 nm). On the contrary, applications based on the strong enhancement of the scattering cross-section (SCS), are generally associated to the

Mechanistic insights into plasmonic photocatalysts in utilizing visible light

• Kah Hon Leong,
• Azrina Abd Aziz,
• Lan Ching Sim,
• Pichiah Saravanan,
• Min Jang and
• Detlef Bahnemann

Beilstein J. Nanotechnol. 2018, 9, 628–648, doi:10.3762/bjnano.9.59

• of nanoparticle formation and deposition using an sustainable approach is illustrated in Figure 6. Interaction of noble metals with semiconductor materials Most of the literature claims that the incorporation of plasmonic nanoparticles with semiconductors can extend light absorption towards the

Near-infrared-responsive, superparamagnetic Au@Co nanochains

• Varadee Vittur,
• Arati G. Kolhatkar,
• Shreya Shah,
• Irene Rusakova,
• Dmitri Litvinov and
• T. Randall Lee

Beilstein J. Nanotechnol. 2017, 8, 1680–1687, doi:10.3762/bjnano.8.168

• applications [7][8]. In parallel, there have been significant advances in the development of plasmonic nanoparticles (e.g., gold and silver), and efforts to tune the extinction wavelength (e.g., into the near infrared (NIR)) are ongoing [9]. Plasmonic nanoparticles exhibit intense colors and have been used in

• minimally absorbed by tissue chromophores and water [24]. Therefore, tunable plasmonic nanoparticles that can respond to NIR light and can be manipulated with a magnetic field hold great promise. Among various magnetic nanoparticles, cobalt nanoparticles have attracted much interest due to their strong

Optical response of heterogeneous polymer layers containing silver nanostructures

• Miriam Carlberg,
• Florent Pourcin,
• Olivier Margeat,
• Judikaël Le Rouzo,
• Gérard Berginc,
• Rose-Marie Sauvage,
• Jörg Ackermann and
• Ludovic Escoubas

Beilstein J. Nanotechnol. 2017, 8, 1065–1072, doi:10.3762/bjnano.8.108

• the nanoparticles to complete the optical characterization. A simple analysis method is proposed to obtain the complex refractive index of nanospheres and nanoprisms in a polymer matrix. Keywords: nanoprisms; nanospheres; plasmonic nanoparticles; spectroscopic ellipsometry; thin film layers

Tunable plasmons in regular planar arrays of graphene nanoribbons with armchair and zigzag-shaped edges

• Cristian Vacacela Gomez,
• Michele Pisarra,
• Mario Gravina and
• Antonello Sindona

Beilstein J. Nanotechnol. 2017, 8, 172–182, doi:10.3762/bjnano.8.18

• losses with respect to more conventional plasmonic nanoparticles, such as, for example, silver and gold [17]. With the rise of low-dimensional materials, a number of theoretical and experimental studies have been oriented to launch, control, manipulate and detect plasmons in graphene-related and beyond

Electric field induced structural colour tuning of a silver/titanium dioxide nanoparticle one-dimensional photonic crystal

• Eduardo Aluicio-Sarduy,
• Simone Callegari,
• Diana Gisell Figueroa del Valle,
• Andrea Desii,
• Ilka Kriegel and
• Francesco Scotognella

Beilstein J. Nanotechnol. 2016, 7, 1404–1410, doi:10.3762/bjnano.7.131

• switching; photonic crystal; plasmonic nanoparticles; Introduction Structural colour is colour due to the Bragg reflection (in photonic structures for example) as opposed to colour from pigments or colour centres [1]. The active tuning of the structural colour in photonic crystals is a subject that has

The role of morphology and coupling of gold nanoparticles in optical breakdown during picosecond pulse exposures

• Yevgeniy R. Davletshin and
• J. Carl Kumaradas

Beilstein J. Nanotechnol. 2016, 7, 869–880, doi:10.3762/bjnano.7.79

• -field enhancement than on the mass or absorption cross-section of the nanostructure. These findings can be used to advance the nanoparticle-based nanoscale manipulation of matter. Keywords: electron plasma; finite element method; optical breakdown; plasmon coupling; plasmonic nanoparticles

• resonance peaks of gold nanospheres towards the near infrared region. (This is useful in biological applications, where light has a good penetration depth) [5][16]. The use of plasmonic nanoparticles and the associated near-field enhancement has been used in applications based on the laser-induced breakdown

• energy absorption process that produces a low-density plasma in the surrounding region of the nanoparticle. Plasmonic nanoparticles such as gold nanospheres and nanorods, enhance the electric field of the incident light and strongly absorb the light. LIB is usually induced when the laser irradiance

Templated green synthesis of plasmonic silver nanoparticles in onion epidermal cells suitable for surface-enhanced Raman and hyper-Raman scattering

• Marta Espina Palanco,
• Klaus Bo Mogensen,
• Marina Gühlke,
• Zsuzsanna Heiner,
• Janina Kneipp and
• Katrin Kneipp

Beilstein J. Nanotechnol. 2016, 7, 834–840, doi:10.3762/bjnano.7.75

• demonstrate a templated green preparation of enhancing plasmonic nanoparticles and suggest a new route to deliver silver nanoparticles as basic building blocks of plasmonic nanosensors to plants by the uptake of solutions of metal salts. Keywords: biotemplates; green preparation; onion; plasmonic

• extracellular space a biomolecular environment is provided that enables the templated growth and the stabilization of larger plasmonic nanoparticles. As suggested by uptake studies with other metal ions into epidermal cells, adsorption of the silver to the extracellular matrix is expected to be faster than

• nanoparticles; surface-enhanced Raman scattering; surface-enhanced hyper-Raman scattering; Introduction Nanostructures made from metals, such as silver, gold, aluminium or palladium in various sizes and shapes attract growing attention because of their interesting properties and broad applications in many

Controlled graphene oxide assembly on silver nanocube monolayers for SERS detection: dependence on nanocube packing procedure

• Martina Banchelli,
• Bruno Tiribilli,
• Roberto Pini,
• Luigi Dei,
• Paolo Matteini and
• Gabriella Caminati

Beilstein J. Nanotechnol. 2016, 7, 9–21, doi:10.3762/bjnano.7.2

• structures are higher compared to those of the individual components [19]. Several methods have been proposed for the fabrication of hybrid composites incorporating plasmonic nanoparticles and graphene [20]; preliminary results from this group evidenced that large SERS enhancement factors were obtained for

Green preparation and spectroscopic characterization of plasmonic silver nanoparticles using fruits as reducing agents

• Jes Ærøe Hyllested,
• Marta Espina Palanco,
• Nicolai Hagen,
• Klaus Bo Mogensen and
• Katrin Kneipp

Beilstein J. Nanotechnol. 2015, 6, 293–299, doi:10.3762/bjnano.6.27

• assigned to small silver clusters. The correlation between the evolution of the surface plasmon band and the decrease of the silver cluster band in the UV confirms the conversion of silver clusters to plasmonic silver nanoparticles. Remaining single small silver clusters on the surface of the plasmonic

• nanoparticles give rise to a strong surface enhanced multicolor luminescence. Experimental Preparation of fruit extract Ananas comosus: The pineapple extract was prepared by cutting away all parts except the yellow pulp of the pineapple. This was then sliced and blended after which the pulp was filtered through

Nanostructure sensitization of transition metal oxides for visible-light photocatalysis

• Hongjun Chen and
• Lianzhou Wang

Beilstein J. Nanotechnol. 2014, 5, 696–710, doi:10.3762/bjnano.5.82

• ][86][87]. In comparison with quantum dots sensitized semiconductors the usage of plasmonic nanoparticles as photosensitizers is more stable and environmentally friendlier. The shortcoming of these plasmonic metals is their high price. This holds true for gold in particular. Moreover, the

• photoconversion efficiency of plasmonic nanoparticles photosensitized semiconductors is not as good as that of quantum dots sensitized semiconductors. Plasmon-enhanced photocatalysis is still in an early research stage and the underlying mechanism is unclear. Furthermore, there are contradictory phenomena

• that the resonant wavelength and SPR intensity depend not only on the nature of the metal, but also on the size and shape of the metallic nanostructures. The control of parameters such as composition, size and shape of plasmonic nanoparticles facilitates the design of nanostructures interacting with