Polymer lipid hybrid nanoparticles for phytochemical delivery: challenges, progress, and future prospects

• Iqra Rahat,
• Pooja Yadav,
• Aditi Singhal,
• Mohammad Fareed,
• Jaganathan Raja Purushothaman,
• Mohammed Aslam,
• Raju Balaji,
• Sonali Patil-Shinde and
• Md. Rizwanullah

Beilstein J. Nanotechnol. 2024, 15, 1473–1497, doi:10.3762/bjnano.15.118

• can be released under specific biological conditions. Further, the polymer coating provides better colloidal stability, sustained drug release, and high loading capacity to the hybrid nanocarriers [54][55][56]. Cell membrane-camouflaged PLHNPs PLHNPs have been coated with cell membranes (e.g

Vinorelbine-loaded multifunctional magnetic nanoparticles as anticancer drug delivery systems: synthesis, characterization, and in vitro release study

• Zeynep Özcan and
• Afife Binnaz Hazar Yoruç

Beilstein J. Nanotechnol. 2024, 15, 256–269, doi:10.3762/bjnano.15.24

• of Fe3O4 NPs was 67.72 emu/g; PDA/Fe3O4 NPs had a saturation magnetization of 65.62 emu/g; VNB/PDA/Fe3O4 NPs showed a saturation magnetization of 60.40 emu/g, as shown in Figure 4c. The observed decrease in magnetization is commonly attributed to the polymer coating on the surface of the magnetic

Antimicrobial and mechanical properties of functionalized textile by nanoarchitectured photoinduced Ag@polymer coating

• Jessica Plé,
• Marine Dabert,
• Helene Lecoq,
• Sophie Hellé,
• Lydie Ploux and
• Lavinia Balan

Beilstein J. Nanotechnol. 2023, 14, 95–109, doi:10.3762/bjnano.14.11

• [41]. The polymer coating adapts to various textile shapes, improves the adhesion between the MNPs and the substrate by compensating internal stresses and maintains the antimicrobial properties of the NPs. As the nanoparticles are embedded inside the polymer matrix, they are protected from external

• electron microscopy (SEM), transmission electron microscopy (TEM), and reflectance measurements to assess the optical properties and the durability of the functionalized textiles. Results and Discussion Photoinduced synthesis of the Ag@polymer coating Specific monomers poly(ethylene glycol) 600 diacrylate

•  5). This result is of great importance because it confirms the complete photoreduction of the precursor and the absence of any oxidized form of silver in the Ag@polymer coating. Mechanical properties Flexibility and adhesion Functionalization of the textiles with the Ag@polymer does not

Engineered titania nanomaterials in advanced clinical applications

• Padmavati Sahare,
• Paulina Govea Alvarez,
• Juan Manual Sanchez Yanez,
• Gabriel Luna-Bárcenas,
• Samik Chakraborty,
• Sujay Paul and
• Miriam Estevez

Beilstein J. Nanotechnol. 2022, 13, 201–218, doi:10.3762/bjnano.13.15

• demonstrated enhanced osseointegration [58]. Additionally, drug release kinetics and duration from titania nanotubes (TNTs) can be controlled by modifying nanotube dimensions, surface chemistry, or by a polymer coating on the TNT implant surface through dip coating or plasma polymerization. Losic and co

Theranostic potential of self-luminescent branched polyethyleneimine-coated superparamagnetic iron oxide nanoparticles

• Rouhollah Khodadust,
• Ozlem Unal and
• Havva Yagci Acar

Beilstein J. Nanotechnol. 2022, 13, 82–95, doi:10.3762/bjnano.13.6

• images related to polymer-coated magnetic nanoparticles show that these nanoparticles seem to be agglomerated, which is due to the protruding of near particles under vacuum. It is difficult to see the PEI polymer coating around the crystal by TEM. However, it is possible to distinguish the polymer

Biocompatibility and cytotoxicity in vitro of surface-functionalized drug-loaded spinel ferrite nanoparticles

• Sadaf Mushtaq,
• Khuram Shahzad,
• Tariq Saeed,
• Anwar Ul-Hamid,
• Bilal Haider Abbasi,
• Nafees Ahmad,
• Waqas Khalid,
• Muhammad Atif,
• Zulqurnain Ali and
• Rashda Abbasi

Beilstein J. Nanotechnol. 2021, 12, 1339–1364, doi:10.3762/bjnano.12.99

• ZS (Malvern Instruments, 69 UK) and the uniform size distribution by gel electrophoresis (GE BIORAD). Drug attachment and drug release analyses were performed by using UV–vis spectroscopy (Thermo Scientific Evo 220). Phase transfer, polymer coating, and purification of MFe2O4 (M = Fe, Co, Ni, Zn) NPs

• by gel electrophoresis The synthesis and polymer coating of NPs were carried out as previously described [22][30]. The nanoparticles (1 mL) were mixed with 350 µL of PMA (0.8 M) and stirred at 60 °C for 1 h. The samples were slowly dried under vacuum and finally redispersed in SBB pH 9. PMA-coated

Comprehensive review on ultrasound-responsive theranostic nanomaterials: mechanisms, structures and medical applications

• Sepand Tehrani Fateh,
• Lida Moradi,
• Elmira Kohan,
• Michael R. Hamblin and
• Amin Shiralizadeh Dezfuli

Beilstein J. Nanotechnol. 2021, 12, 808–862, doi:10.3762/bjnano.12.64

The nanomorphology of cell surfaces of adhered osteoblasts

• Christian Voelkner,
• Mirco Wendt,
• Regina Lange,
• Max Ulbrich,
• Martina Gruening,
• Susanne Staehlke,
• Barbara Nebe,
• Ingo Barke and
• Sylvia Speller

Beilstein J. Nanotechnol. 2021, 12, 242–256, doi:10.3762/bjnano.12.20

• temperature (n = 3). Water contact angle values were calculated with the associated software (ADVANCE, V.1.7.2.1, Krüss, Hamburg, Germany) via Young's equation. Plasma polymer coating: The specimens were coated with a plasma-polymerized allylamine (PPAAm) nanolayer using a low-pressure plasma reactor (V55G

Influence of the magnetic nanoparticle coating on the magnetic relaxation time

• Mihaela Osaci and
• Matteo Cacciola

Beilstein J. Nanotechnol. 2020, 11, 1207–1216, doi:10.3762/bjnano.11.105

• oleic acid coating method used on pristine nanoparticles [14]. Homogeneous, polymer-coated spherical magnetite nanoparticles with superparamagnetic properties have been successfully synthesised. The polymer coating provides extra stability to the magnetic nanoparticles in aqueous media [15]. To increase

• biocompatibility or to enable specific hydrophilic properties, nanoparticles were coated with poly(ethylene glycol) (PEG) [16]. Experimental data concerning how different coatings influence nanoparticle magnetic properties are quite controversial. A few studies indicate that a thin polymer coating layer enhances

• ., surface-to-surface separation between nanoparticles), and on the surface density of the polymer coating layer. Thus, the model uses the van der Waals interaction force equation, as follows [21]: where ri and rj are spherical particle radii of the i-th and j-th nanoparticles, is the versor of the

Applications of superparamagnetic iron oxide nanoparticles in drug and therapeutic delivery, and biotechnological advancements

• Maria Suciu,
• Corina M. Ionescu,
• Alexandra Ciorita,
• Septimiu C. Tripon,
• Dragos Nica,
• Hani Al-Salami and
• Lucian Barbu-Tudoran

Beilstein J. Nanotechnol. 2020, 11, 1092–1109, doi:10.3762/bjnano.11.94

• increase in macrophages. The general consideration is that polymer coating offers colloidal stability, but in fact PVA-coated SPIONs are only stable in water at a certain pH value. In cell culture medium they agglomerate. Studies showed that the components of the medium, and not the calf serum added to the

Plant growth regulation by seed coating with films of alginate and auxin-intercalated layered double hydroxides

• Vander A. de Castro,
• Valber G. O. Duarte,
• Danúbia A. C. Nobre,
• Geraldo H. Silva,
• Vera R. L. Constantino,
• Frederico G. Pinto,
• Willian R. Macedo and
• Jairo Tronto

Beilstein J. Nanotechnol. 2020, 11, 1082–1091, doi:10.3762/bjnano.11.93

• five samples. One was the control without polymer coating. The other four samples were coated with pure alginate; alginate and ZnAl-CO3-LDH, alginate and NAA, or alginate and ZnAl-NAA-LDH, with four replications. Six bean seeds previously coated with polymer (as described in Table 1) were sown in each

Understanding nanoparticle flow with a new in vitro experimental and computational approach using hydrogel channels

• Armel Boutchuen,
• Dell Zimmerman,
• Abdollah Arabshahi,
• John Melnyczuk and
• Soubantika Palchoudhury

Beilstein J. Nanotechnol. 2020, 11, 296–309, doi:10.3762/bjnano.11.22

• (PDI: 0.17) and 140 nm (PDI: 0.12), respectively. The iron oxide NP formulations showed similar surface charges (Figure 5c). The low absolute values of zeta potential of the NPs suggested positively charged surfaces stabilized via steric hindrances from the polymer coating. The experimental flow

Small protein sequences can induce cellular uptake of complex nanohybrids

• Jan-Philip Merkl,
• Malak Safi,
• Christian Schmidtke,
• Fadi Aldeek,
• Johannes Ostermann,
• Tatiana Domitrovic,
• Sebastian Gärtner,
• John E. Johnson,
• Horst Weller and
• Hedi Mattoussi

Beilstein J. Nanotechnol. 2019, 10, 2477–2482, doi:10.3762/bjnano.10.238

• for this study, due to their compact size, enhanced colloidal stability, and reduced non-specific interactions in biological media [22][24][25][26][27][28][29][30][31]. The central QDs used to build up the hybrid assemblies were prepared via encapsulation within a polymer coating made of an amine

Subsurface imaging of flexible circuits via contact resonance atomic force microscopy

• Wenting Wang,
• Chengfu Ma,
• Yuhang Chen,
• Lei Zheng,
• Huarong Liu and
• Jiaru Chu

Beilstein J. Nanotechnol. 2019, 10, 1636–1647, doi:10.3762/bjnano.10.159

• substrate on which conductive metal circuits are patterned. Another thin polymer coating is employed to protect the circuits from contamination and short circuiting. Such a sandwich structure permits the device to bend and fold flexibly, yet with other advantages including small volume, light weight, and so

Scavenging of reactive oxygen species by phenolic compound-modified maghemite nanoparticles

• Małgorzata Świętek,
• Yi-Chin Lu,
• Rafał Konefał,
• Liliana P. Ferreira,
• M. Margarida Cruz,
• Yunn-Hwa Ma and
• Daniel Horák

Beilstein J. Nanotechnol. 2019, 10, 1073–1088, doi:10.3762/bjnano.10.108

• analysis. Magnetic measurements indicated that the polymer coating does not affect the superparamagnetic character of the iron oxide core. However, magnetic saturation decreased with increasing thickness of the polymer coating. The antioxidant properties of the nanoparticles were analyzed using a 2,2

• particles. The obtained results indicated that in case of the lack of sufficient antioxidant capacity of polymer coating, further reactions occur on the surface of the particle core. In addition, polymer intermixing, the configuration of hydroxy groups on the benzene rings, and especially particle

Outstanding chain-extension effect and high UV resistance of polybutylene succinate containing amino-acid-modified layered double hydroxides

• Adam A. Marek,
• Vincent Verney,
• Christine Taviot-Gueho,
• Grazia Totaro,
• Laura Sisti,
• Annamaria Celli and
• Fabrice Leroux

Beilstein J. Nanotechnol. 2019, 10, 684–695, doi:10.3762/bjnano.10.68

• study reports the beneficial role of PHE interleaved into LDH as a self-healing agent for polymer coating in corrosion inhibition for aluminium substrates [16]. Due to the presence of benzene (for PHE) or the heterocyclic imidazole ring (for HIS), both organic molecules should absorb in the short to

Polarization-dependent strong coupling between silver nanorods and photochromic molecules

• Gwénaëlle Lamri,
• Alessandro Veltri,
• Jean Aubard,
• Pierre-Michel Adam,
• Nordin Felidj and
• Anne-Laure Baudrion

Beilstein J. Nanotechnol. 2018, 9, 2657–2664, doi:10.3762/bjnano.9.247

• used are 1′,3′-dihydro-8-methoxy-1′,3′,3′-trimethyl-6-nitrospiro[2H-1-benzopyran-2,2′-(2H)-indole] molecules (from Sigma-Aldrich). They are able to switch from their transparent spiropyran isomer (SPY) to their colored merocyanine isomer (MC) by absorbing ultraviolet light. To achieve a polymer coating

Cytotoxicity of doxorubicin-conjugated poly[N-(2-hydroxypropyl)methacrylamide]-modified γ-Fe₂O₃ nanoparticles towards human tumor cells

• Zdeněk Plichta,
• Yulia Kozak,
• Rostyslav Panchuk,
• Viktoria Sokolova,
• Matthias Epple,
• Lesya Kobylinska,
• Pavla Jendelová and
• Daniel Horák

Beilstein J. Nanotechnol. 2018, 9, 2533–2545, doi:10.3762/bjnano.9.236

• )methacrylamide-co-2-(N-methylmethacrylamido)acetate] [P(HPMA-MMAA)] and doxorubicin (Dox) conjugation In this report, HPMA and MMAA monomers were used for preparation of polymer coating for the γ-Fe2O3 nanoparticles (Figure 2). The PHPMA backbone brings the benefits of hydrophilicity, hydrolytic stability

A visible-light-controlled platform for prolonged drug release based on Ag-doped TiO₂ nanotubes with a hydrophobic layer

• Caihong Liang,
• Jiang Wen and
• Xiaoming Liao

Beilstein J. Nanotechnol. 2018, 9, 1793–1801, doi:10.3762/bjnano.9.170

• infiltrate the nanotubes to increase the amount of Zn2+ released. The hydrophobic layer (NDM) can be applied for the inhibition of drug release, and thereby to extend the course of drug release. Meanwhile, visible light can be used to control drug release via degradation of the polymer coating on the

Surface characterization of nanoparticles using near-field light scattering

• Eunsoo Yoo,
• Yizhong Liu,
• Chukwuazam A. Nwasike,
• Sebastian R. Freeman,
• Brian C. DiPaolo,
• Bernardo Cordovez and
• Amber L. Doiron

Beilstein J. Nanotechnol. 2018, 9, 1228–1238, doi:10.3762/bjnano.9.114

• were not obtainable because of the continuous degradation of the polymer coating under the electron beam exposure. The energy dispersive X-ray spectroscopy (EDS) spectrum of the uncoated SPIOs (Figure 3C) showed peaks corresponding to iron (Fe) and oxygen (O), as expected, while the TEM grid and Si (Li

A systematic study of the controlled generation of crystalline iron oxide nanoparticles on graphene using a chemical etching process

• Peter Krauß,
• Jörg Engstler and
• Jörg J. Schneider

Beilstein J. Nanotechnol. 2017, 8, 2017–2025, doi:10.3762/bjnano.8.202

• additional polymer coating is often deposited on the monolayer prior to the etching process to provide mechanical support for the graphene, preventing it from tearing and ripping [14][22][23][24][29][30][31]. Most common are thin layers of poly(methyl methacrylate) (PMMA) which can be easily deposited by

• protective polymer coating on the as-synthesized graphene is replaced by a protective frame which does not cover the graphene but which allows the detached graphene layer to be handled in a secure way. In addition, subdividing the etching chamber in two isolated yet connected compartments helps to further

• nanoparticles show no growth of CNTs when using ethene as a growth component, confirming their catalytic activity. Conclusion We introduced a modified solution-based etching process for CVD graphene by replacing the regular protective polymer coating with an encircling polymer frame surrounding graphene and by

Synthesis and functionalization of NaGdF₄:Yb,Er@NaGdF₄ core–shell nanoparticles for possible application as multimodal contrast agents

• Dovile Baziulyte-Paulaviciene,
• Vitalijus Karabanovas,
• Marius Stasys,
• Greta Jarockyte,
• Vilius Poderys,
• Simas Sakirzanovas and
• Ricardas Rotomskis

Beilstein J. Nanotechnol. 2017, 8, 1815–1824, doi:10.3762/bjnano.8.183

• amphiphilic polymer coating [18] have been developed in order to transfer nanoparticles with hydrophobic surfaces into aqueous media. Furthermore, the multimodal UCNP surface modification field still lacks reference materials and established protocols for functionalization and targeting. Some studies showed

Surface functionalization of 3D-printed plastics via initiated chemical vapor deposition

• Christine Cheng and
• Malancha Gupta

Beilstein J. Nanotechnol. 2017, 8, 1629–1636, doi:10.3762/bjnano.8.162

• the lattice since XPS probes the top 5 nm of the surface. Scanning electron microscopy (SEM) images of the lattice (Figure 3) reveal that the appearance before modification (left) and after PPFDA coating (right) are similar since the thickness of the polymer coating is much smaller than the feature

• therefore confirm the presence of a polymer coating of more than 5 nm. To decrease thermal gradients during the deposition of PPFDA onto the PLA lattices, the filament temperature can be reduced. We therefore investigated whether a uniform coating could still be achieved with lower filament temperatures

• biomedical applications [35][36]. However, because PHEMA is water soluble, the cross-linker EGDA was incorporated during the deposition to ensure that the hydrophilic polymer coating would not dissolve in water. As shown in Figure 4, an uncoated PLA lattice did not sink in water, despite PLA having a density

Micro- and nano-surface structures based on vapor-deposited polymers

• Hsien-Yeh Chen

Beilstein J. Nanotechnol. 2017, 8, 1366–1374, doi:10.3762/bjnano.8.138

• technology is demonstrated. Keywords: multifunctional; polymer coating; surface modification; surface patterning; vapor deposition; Review Introduction Vapor-based processes of polymer coating/deposition combine many unique attributes in a dry, solvent-free process, and the deposition protocols as well as

Nanotopographical control of surfaces using chemical vapor deposition processes

• Meike Koenig and
• Joerg Lahann

Beilstein J. Nanotechnol. 2017, 8, 1250–1256, doi:10.3762/bjnano.8.126

• the elastic modulus of the polymer coating and the substrate. Haller et al. investigated the morphology of vapor-deposited polymers on liquid substrates (Figure 3) [29]. Depending on surface tension, liquid viscosity, deposition rate and deposition time, either film or particle formation was found

• energy of the underlying substrate using a fluorinated polymer. Minimal nucleation of monomer was found on the fluorinated spots, which led to a dense polymer coating on these sites. These techniques show great promise in the fabrication of membranes [37]. Oblique angle deposition A significant amount of